Used Fliegl Sds 380 Vario Kipp 30/40 for sale (47,324)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, Year of construction: 2026, #Plateau semi-trailer Mega - Bespoke transport solution – configure your Fliegl vehicle to your requirements; vehicle shown is an example, production and equipment individually to customer specification #Chassis – general haulage semi-trailer - Fine-grain steel welded construction - Fifth wheel plate with replaceable 2" kingpin - Reinforced frame for high payload, also suitable for vehicle transport - Outer frame with "Load-Lock-Profil" at approx. 400 mm centres for lashing strap attachment Tedpfxozwn Izs Ahmoc - 10 pairs of lashing points recessed top/outside in outer frame, 10 t each - Foldable rear support legs - 2 wheel chocks with holder - Aluminium side impact protection - Galvanised steel underrun protection - Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle - 1 spare wheel holder for 1 spare wheel, with wheel fixing set - 2 lockable plastic toolboxes, W=600/H=425/D=460 mm - Container locks: 4 pairs recessed in floor for 2x20ft or 1x40ft containers, foremost position as recessed folding lock - 10 pairs of stake pockets recessed in outer frame, 70x40 mm internal - 10 stake pockets recessed centrally in floor, 70x40 mm internal - 2 transverse lashing/stake rails recessed in floor, full width to outer frame, approx. 100 mm high, 20 mm round steel bars top and bottom (approx. 60 mm apart), angle-plate base, half open below, for lashing and fitting 80x80 mm stakes #Arrangement - Stake pocket positions 2 and 4 per Fliegl data sheet - 20 plug-in stakes, hot-dip galvanised - Storage space for aluminium loading ramps, ramps slide in from the rear - 3 pairs of folding lashing eyes, 10 t, in outer frame #Axles & suspension - SAF disc-brake axles, air suspension - Axle 1 as automatic lift axle, incl. forced lowering and traction aid, activated by braking three times #Braking system - 2-line air braking system, colour-coded lines for easy servicing - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, no connecting line - EBS with front EBS socket, no connecting cable - Lift/lower valve, 2 ride heights adjustable via hand control (1x 980 mm, 1x 1100 mm coupling height) - Ride height linked to lift axle: raising lift axle increases loading/overall height by 50 mm - Trailer stability system #Wheels & tyres - 435/50 R19.5 steel wheels #Electrics - 24 V, multi-chamber lights - Yellow LED side marker lights - 2 white LED front position lights - 2 white/red outline marker lights at rear - 2x 7-pin and 1x 15-pin anti-mismatch sockets at front - LED work lights at sides, 1x left and 1x right (direction of travel) - 2 additional LED work lights at rear - 1 beacon with holder, switched via side lights - 2 pairs of LED-illuminated warning boards, extendable to 4,000 mm - Additional 7-pin socket in underrun protection #Floor - Phenolic plywood floor approx. 30 mm thick, on longitudinal sub-frames for high point loads, forklift axle load up to max. 7,100 kg #Front wall / front corner posts - 25 mm aluminium hollow profile, 1,350 mm high - Solid steel corner posts (closed, heavy-duty version) - Front wall internally fitted with additional 1,250 mm high phenolic panel ("Crash-Blocker") - Steel impact protection at approx. 140 mm height on lower interior - Internal storage compartment for plug-in stakes

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: T4-0899, Excel-Csepel DFS 380 lathe (T-400/600) with Sinumerik 810D/CNCkon, year of manufacture 1999 – machine for hobbyists Condition: operational, but for sale only as a hobbyist/repair machine – no guarantee of continuous functionality Year of manufacture: 1999 Location: Western Saxony Todpfozw Ea Iox Ahmsc Price: negotiable Technical data: Manufacturer: Excel Csepel Machine Tools Ltd. (Hungary) Type: DFS 380, nameplate designation T-400/600 Machine No.: T4-0899 Control: Siemens Sinumerik 810D with CNCkon Total connected load: 30 kW Connection values: 3×400 V / 50 Hz, control voltage 230 V AC / 24 V DC Max. turning diameter over bed: 535 mm / over slide: 380 mm Travel X: 230 mm, Z: 1,115 mm Main spindle drive: 18.5 kW (100% duty cycle), speed 35–3,500 rpm Spindle head A8 according to DIN 55026, spindle bore 82 mm, max. bar diameter 70 mm Feed axes: FANUC AC servo motors, rapid traverse X 15 m/min, Z 20 m/min Turret: TOEM 200 „06“, 12 tool positions, tool holder DIN 69880, Ø 40 mm Tailstock: hydraulic, stroke 150 mm, internal taper MK4 Weight: approx. 8,300 kg, dimensions L×W×H: 3,690 × 1,750 × 1,900 mm Condition/Special features (technical honesty): The machine is fundamentally operational and, thanks to the integrated correction electronics (CNCkon), is in principle very accurate. However, this accuracy is impaired by existing spindle play (approx. 2–3 hundredths of a mm). The machine is therefore primarily suitable for experienced buyers who are willing to repair or rework the spindle play themselves. Therefore, it is explicitly sold as a hobbyist/self-repair machine, without any assurance of permanent production suitability. Description: For sale is an Excel-Csepel DFS 380 lathe (nameplate T-400/600), year of manufacture 1999, with Siemens Sinumerik 810D control and CNCkon correction electronics. The machine is functional and runs, but has a spindle play of approx. 2–3 hundredths of a mm, which limits the achievable accuracy. Suitable for technically skilled buyers or as a hobbyist/spare parts machine. Further technical data see above. Inspection at the location in Western Saxony possible by arrangement. Sold without guarantee and warranty, negotiable. Other machines available from site clearance Site takeover negotiable

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 chock blocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-elliptical fenders with anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with raise/lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal for display on the dashboard in the driver's cab; the truck must be appropriately prepared; no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: with certain tractor units, false diagnoses may occur, even if the function is working) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Operating instructions Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with DEKRA approval and certificate (according to §13 EC - FGV) prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10-year guarantee against rust-through Tedpji Riv Nsfx Ahmoc or hot-dip galvanized - 15-year guarantee against rust-through Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: new, Bernardo GB 30 Vario geared drill press Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 35 mm Tjdpfx Aegd H Uuehmsc Maximum threading capacity: M22 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 3 Spindle speed / 2 speeds: 70 - 495 / 495 - 3500 rpm Feed rate: 0.1 / 0.2 / 0.3 mm/rev Overhang: 280 mm Distance spindle / table max.: 650 mm Distance spindle / base plate: 1120 mm Quill stroke: 125 mm Column diameter: 110 mm Table size / T-slot size: 450 x 380 mm / 14 mm Work area base plate: 340 x 330 mm Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Machine dimensions (W x D x H): 500 x 800 x 2100 mm Weight approx.: 320 kg Scope of delivery • Drill chuck arbor MK 3 / B 16 • Reduction sleeve MK 3 / 2, MK 3 / 1 • Gear-type drill chuck 1 - 13 mm / B 16 • Coolant system • Electromagnetic spindle feed • Threading device • Automatic tool ejector • LED machine light • Digital speed display • Initial filling with Shell Tellus 46 • Height-adjustable protective cover

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Tsdpfx Ajza Aiyohmoc Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: good (used), Various standard and powered tool holders in different designs for VDI 20, 30, 40, 50, and 60. Tsdpfebql T Esx Ahmoc Please specify the VDI size you require when submitting your inquiry! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, axle configuration: 3 axles, first registration: 07/2005, color: other, Year of construction: 2005, Empty weight: 4.200 kg Axle 1: left 4-8 mm right 10-10 mm Tsdpfxjzxz Iwo Ahmjc Axle 2: left 10-10 mm right 12-12 mm Axle 3: left 4-8 mm right 4-4 mm We have the possibility to stack trailers!

Condition: excellent (used), For sale: a Gebr. Becker DVT 40 vacuum pump from the reputable German manufacturer, Becker. This unit is designed for industrial applications, including CNC machines, woodworking machines, packaging machines, vacuum gripper systems, and other installations requiring vacuum generation. The pump is complete with an electric motor and is ready for connection. The visual condition matches the photos – normal signs of wear and tear consistent with its use. It is being sold as a used unit. Technical data: Manufacturer: Gebr. Becker, Wuppertal Model: DVT 40 Year of manufacture: 1978 Serial number: K685509 Capacity: 40 m³/h Maximum vacuum: 0.5 bar Motor power: 1.5 kW Rotational speed: 1420 rpm Tsdpfxjzi Ha He Ahmsc Power supply: 220/380 V Frequency: 50 Hz Protection class: IP44 Insulation class: B Power factor (cos φ): 0.8 Applications: CNC machines Machining centers Woodworking machines Vacuum packaging machines Vacuum transport systems Vacuum grippers and tables Industrial automation

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WFDFLT33902027826, empty load weight: 6,590 kg, maximum load weight: 28,410 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2021, next inspection (TÜV): 02/2027, loading space length: 15,020 mm, loading space width: 2,490 mm, loading space height: 2,810 mm, total length: 15,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, tire condition: 60 %, color: red, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, For sale is a FLIEGL SDS 390 X-TRA LONG curtainsider trailer. The trailer features both a large and a small pallet storage box, Alcoa alloy wheels, work lights, fire extinguisher boxes, and an air pipe system for roof de-icing. The trailer is in excellent technical and visual condition. The vehicle has low mileage and is in very good condition! Tsdpfx Ajyqxkhjhmjc Specifications: - First registration: 01.02.2021 - VIN: WFDFLT33902027826 - Inspection (HU): 02/2027 - Safety inspection (SP): 08/2026 - 1st axle tires: 385/65R22.5, tread depth approx. 60%, air suspension - 2nd axle tires: 385/65R22.5, tread depth approx. 60%, air suspension - 3rd axle tires: 385/65R22.5, tread depth approx. 60%, air suspension - Galvanized and painted chassis - Portal doors - Alcoa Dura-Bright aluminum wheels - Air Pipe to prevent ice formation on the roof - Work lights - Mud flaps - Pallet storage boxes - Fire extinguisher box - Load securing curtain Non-binding offer, subject to input errors, changes, mistakes, and prior sale. Financing available upon request. We are also happy to organize customs clearance for you. Opening hours: Mon-Fri 8 am - 4 pm or by appointment Price is NET / negotiable basis An invoice with VAT shown will be issued upon sale. Vehicle location: Im Gewerbepark 11, 99441 Umpferstedt

Condition: good (used), CHARACTERISTICS Table; 4000 X 1250 X axis travel; 3500 mm Y axis travel; 2500 mm Z-axis travel; 800 mm Distance between columns; 2300 mm Spindle RPM; 5,000 rpm Control; FIDIA Electronic handwheel Universal head Tool; BT 50 Todpfxjr I Ax Ro Ahmoc Motor power; 30 Kw Feed rate; 5000 mm / min Rapid traverse; 15.000 /12.000mm / min Permissible weight on the table; 10.000 kg Machine dimensions (width x length x height); 4262 x 10748 x 4400 Weight; 25.500 kg

Condition: ready for operation (used), For sale here is a main spindle from a Fooke Endura milling machine; it is in working condition. Tedpjzhh Ipsfx Ahmsc

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 4.950 kg Axle 1: left 5 mm right 5 mm Tedpjzkldasfx Ahmsc Axle 2: left 10 mm right 10 mm Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers!

Condition: used, empty load weight: 6,075 kg, maximum load weight: 28,925 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5, color: red, Year of construction: 2023, Equipment: ABS, Color: RAL 3002 Carmine Red Front/rear panel: Purple / white Extension ladder at the rear, door latch on the side Support wedges with holder, aluminum side impact protection, galvanized steel underride protection, quarter panel fenders in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, Pallet stop on both sides, approximately 15-20 mm high, in a bolted design, loading height is reduced by approximately 15-20 mm, plastic toolbox Axles + Suspension SAF disc brake axles, "axle/chassis laser measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and starting assistance, Activation via "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no warranty for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing, spring brake parking brake, 2 fail-safe coupling heads in front, without connecting line, EBS, electronic braking system with EBS socket in front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm (in Mega Flex only at low ride height or saddle height), vehicle - driving stability system Tsdezun I Aepfx Ahmoc Wheels and tires 435/50 R19.5", manufacturer's choice, steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights in front 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets in front Floor Sieve-printed panels approximately 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / corner posts 2,580 mm high, corner posts steel in volume design, release device for side tarpaulin on front wall, "Crash-Blocker," bottom inside at approximately 140 mm height with steel impact protection Intermediate supports 3 pairs of sliding supports, fully adjustable in length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of support positions Insertion slats 5 rows of wooden insertion slats Rear wall / corner posts Corner posts at the rear, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal rotary rod locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Fliegl sliding roof, sliding cover, end lift at the rear that can be folded up, with a cover that can be slid from back to front, L-shaped roof beam for the automotive industry, inner width between the roof beams approximately 2,490 mm, tarpaulin color: white, roof non-elastic, little deflection of the roof beam during loading and unloading, EcoLift - lifting roof can be raised by approximately 380 mm, on both sides, with gas spring support, 3 driving positions in the front: interior height in the front approximately 2900mm/ 2950 mm / 3000 mm Optimal rain strip at the rear, on top of the end rail, above the doors Fliegl manufacturer certificate for body strength according to EN 12642 XL, Fliegl manufacturer certificate for body strength accor

Condition: used, axle configuration: 3 axles, first registration: 05/2024, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,010 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Notes = Number of axles: 3, Tare weight: 5905 kg, Gross weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2024, Lifting roof, Sliding roof, Axle type: SAF, MEGA // LIKE NEW!! // LIFTING ROOF // SAF DISC BRAKES // FLIEGL FAST OPENER = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Axle 3: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Weights Tare weight: 5,905 kg Payload: 33,095 kg GVW: 39,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: very poor Technical condition: very poor Optical condition: very poor Damage: none Financial Information Leasing price: 362 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands, covering various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Tjdpfeyupdysx Ahmoc Ask directly about our European warranty package.

Condition: like new (used), Year of construction: 1997, Retrofitted: 2025 Tedpfeyw Uqxjx Ahmsc Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm   Traverses of axis Longitudinal traverse X: 4000 mmCross traverse Y: 1200Vertical traverse Z: 1000 Milling head Head type: New Universal Auto-indexing (UDG / every 2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)  /  Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,8 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 /  10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approximate: 23500 kgMachine dimensions approximate: 11100 x 5392 x 3400 mm Accessories Guarding: 2 front doors and a new perimetral wire-mesh fence.Electronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, first registration: 09/2016, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - BPW-Assen - Drum brakes - Lift Axle = Remarks = Fliegl, 2016, BPW axles, Axle 1 Liftable, Drum brakes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Tjdpfxoz Eh N Ej Ahmsc - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side Tjdei Riwuspfx Ahmoc 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: used, maximum load weight: 2,300 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 06/2015, Ref. No.: B - 06 On behalf of customer Fliegl * TTS 30-30 * Low-bed trailer * Ramps * 2-axle Tsdpfxoxvf U Nj Ahmec * Permissible total weight 3000kg * Very good condition, little used Trade-in possible Financing starting at 3.99% Errors and prior sale excepted! The information in this advertisement is non-binding descriptions and does not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Stated features should be checked separately. All details in the ads are non-binding! Nationwide delivery within Germany available upon request. Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011, Empty weight: 5.100 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Tjdszp Hc Iopfx Ahmsc We have the possibility to stack trailers!

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 50 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69803 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection couplings (red and yellow) * 15-pin connector plug * Lifting and lowering mechanism * Suspension: Air * Total weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible total weight: 38,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 70% – 70% – Tyre size: 385/55 R22.5 * Tyre condition 2nd axle: 30% – 30% – Tyre size: 385/55 R22.5 * Tyre condition 3rd axle: 50% – 50% – Tyre size: 385/55 R22.5 * Tyre sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for timber and metal, manufacturer: S Grabmeier * Unladen weight: 4,600 kg, front wall height: 2,040 mm * 6 pairs of lashing rings for rail transport * Frame height: 500 mm, wooden superstructure with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Special features: Lift axle / timber transport / SAF axle Disclaimer: Subject to change, prior sale and errors excepted. More photos and videos can be found on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast, easy financing options * Processing of all (export) documents * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / cargo securing Tjdpfxeyib Iqo Ahmec * TÜV inspections, registration services * Transfer of commercial vehicles Ask our trained staff, we are happy to advise you.

Condition: used, Year of construction: 2012, fuel type: gas, Lifting capacity: 3.000 kg Tedozfnbwspfx Ahmec Please contact Gebrauchtgeräte Center for more information

Condition: used, axle configuration: 3 axles, first registration: 04/2021, loading space length: 13,650 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional options and accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6015 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2021, Side wall material: Tarp, Customs seal, Sliding roof, Axle type: SAF = Additional information = General information Cabin: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 435/50R19,5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 6,015 kg Payload: 32,985 kg GVWR: 39,000 kg Functional Loading platform height: 94 cm Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial information Leasing price: €232 per month (default, 60 months); Ask for more information and terms = Company information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! Tjdpfx Aozazpxshmjc • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, oil tank capacity: 400 l, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Tjdpfx Ahsxwnqcemec

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt Tedpfx Ajidmkrohmsc KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: used, maximum load weight: 37,805 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 08/2014, total length: 9,510 mm, total width: 2,550 mm, Year of construction: 2014, Additional information: * Type | First axle: Bridgestone R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 60% * Tire tread depth inner right | First axle: 60% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Bridgestone R * Type | Third axle: Bridgestone R * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 60% * Tire tread depth inner left | Third axle: 60% * Tire tread depth inner right | Second axle: 60% * Tire tread depth inner right | Third axle: 60% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Drum brakes * Suspension | First axle: Air suspension * Lifting axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Drum brakes * Brake type | Third axle: Drum brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional features: * Homepage * Lifting axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. Todpozxkx Eefx Ahmsc The stated prices exclude BPM (Belasting Personenauto's en Motorrijwielen - tax on passenger cars and motorcycles) and are only valid for export.