Used Gauge Caliber for sale (2,067)

Condition: used, mileage: 239,000 km, power: 110 kW (149.56 HP), first registration: 02/2010, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro5, number of seats: 6, total length: 7,000 mm, Equipment: ABS, central locking, parking heater, soot filter, Chat now via WhatsApp: Contact our sales consultant quickly and easily. Attention!!! Sales are preferably made to commercial businesses. Internal ID number: [3418] ----Optional extras: * 12-64 months warranty (valid throughout the EU) Kedpfxszhhx Ie Ahisnc * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available even without a down payment * Spring offer: Upon request and for a surcharge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * German vehicle * Regularly serviced * Immediately ready for use * Maxi version, high and long * Auxiliary heater * Automatic transmission * Mixto with 6 seats * Camper conversion with bed/table/kitchenette/shelves/awning etc. Special equipment: 13-pin trailer socket, ashtray in the passenger compartment, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, front side turn signals, digital tachograph, floor mats, passenger compartment, heated rear window, rear door (opening angle 270 degrees), metallic paint, crossmember with integrated step, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, interior rearview mirror, seat equipment: comfort headrest, passenger seat, seat equipment: comfort headrest, driver's seat, seats in the driver's cab: passenger double seat, seats in the driver's cab: driver's seat comfort, seats in the cargo/passenger compartment: 1st row, 3-seater bench, narrow, seats in the cargo/passenger compartment: 2nd row, 3-seater bench, reinforced rear stabilizer, reinforced front stabilizer, reinforced shock absorbers, fuel level gauge for auxiliary heater, luxurious interior trim in the cargo/passenger compartment, reinforced front axle, auxiliary heater (hot water), two-way speakers front and rear Additional equipment: 3rd brake light, storage net on the front seat backrest left, storage net on the front seat backrest right, adaptive brake light, airbag passenger side, airbag driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, floor panel in combination design, brake assistant, headlining, headlining in the driver's cab, window for rear doors, window for rear doors/tailgate with wiper/washer system, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, window in the cargo/passenger compartment: - fixed, center left, window in the cargo/passenger compartment: - fixed, center right, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, glove compartment lockable, wooden floor in the cargo area, body/structure: combination high-roof standard, child safety lock, fuel tank: main tank 75 liters, headlight range adjustment, engine 2.1 liters - 110 kW CDI CAT, passenger car registration, wheelbase 4325 mm, smoker's package, low emissions according to Euro 4 emission standard Group III, sliding door cargo/passenger compartment right, seat cover/upholstery: fabric Lima, seats in the driver's cab: passenger seat adjustable, all-round glazing, maintenance interval display Assyst, heat-protection glazing (windshield with band filter at the top), permissible total weight 3.50 t, auxiliary heater (air) electric.----Do you want to lease or finance? We offer attractive offers

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm Kjdpfx Aevc Amtehisnc total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Year of construction: 1982, Technical details: Knsdpfsu Ibzwsx Ahiec sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm Ksdpou Icc Ajfx Ahijnc throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: used, Year of construction: 1990, Technical details: pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2630 mm control for program: CNC-Steuerung CYBELEC max. stroke: ca. 215 mm throat: 255 mm dayligth: 410 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back gauge: 500 motorisch Kodsu Icdaspfx Ahisnc table-size: 3100 x 60 mm work height max.: 890 mm connection voltage: 3x380 V / 50 Hz V total power requirement: 5,5 kW weight of the machine ca.: 7,9 t machine dimensions LxWxH: ca. 3,8 x 1,5 x 2,5 m 500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Operation via control panel and/or control stand for two-hand/foot operation Control also via manual control unit incl. accessories in stock i.D. *

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein Kjdpfx Ahou Icppsisnc down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: Kedpfx Asu Icp Ashionc sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm Knedou Nfrpopfx Ahisc table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Kedpfxju Rni Ho Ahijnc Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: excellent (used), MINGAZZINI INDUSTRIAL STEAM BOILER – 1,000 KG/H MINGAZZINI industrial steam boiler with a production capacity of 1,000 kg of steam per hour, designed to generate and supply steam to industrial facilities that require thermal energy for their production processes. The equipment features a horizontal configuration with a front-mounted burner, cylindrical body, pressure regulation and control systems, safety instrumentation, and a control panel. Its design allows for integration into steam generation and distribution systems for food industries, canning plants, beverage plants, and other industrial sectors that use steam in their production processes. MAIN FEATURES - Manufacturer: MINGAZZINI - Type: Industrial steam boiler - Nominal production: 1,000 kg of steam/hour - Configuration: Horizontal - Industrial steam generation - Cylindrical body with robust construction - Integrated front-mounted burner - Automatic combustion system - Steam pressure regulation - Pressure gauge - Visual water level indicators - Water feed system - Feed pump Knjdpfsz R Tgvox Ahisc - Regulation and safety valves - Pressure switches and control devices - Blowdown system - Control panel - Monitoring instrumentation - Service pipes and connections - Supporting metal structure - Prepared for integration into industrial steam networks OPERATION PROCESS The MINGAZZINI boiler receives feedwater and generates steam through heat transfer produced by the combustion system. The burner provides the thermal energy needed to heat the water contained in the boiler until it reaches the established pressure and temperature conditions. The generated steam is conveyed to the distribution network of the facility, from where it can be used in different equipment and industrial processes. The regulation systems monitor the operating parameters, including pressure, water level, and burner operation, allowing the steam generation to be managed according to demand. APPLICATIONS Especially suitable for food industries, canning plants, beverage manufacturers, and industrial processing plants. Its applications include: - Feeding autoclaves for sterilization - Industrial cookers - Vegetable scalding units - Heated vats and tanks - Heat exchangers - Pasteurizers - CIP cleaning systems - Industrial heating processes - Steam distribution networks The MINGAZZINI 1,000 kg/h provides a centralized solution for steam supply to different equipment in an industrial facility. The maximum working pressure, thermal power, fuel type, and exact specifications must be confirmed by the equipment’s nameplate and technical documentation. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Technical details: x-axis: 1000 mm z-axis: 600 mm diameter: - mm measuring range Y-axis: 972 mm interface: RS-232 Knjdpozbqypsfx Ahisc tool taper: - weight: 40 kg power consumption: 100 Watt Floor Space WxD: 1,2 x 0,8 m Mitutoyo Linear Height 600 Height Gauge with Wenzel Precision Granite Surface Plate (Optional) The granite surface plate is not included in the sale but can be purchased separately. For sale is a high-quality Mitutoyo Linear Height 600 digital height gauge, designed for accurate 2D measurement tasks in quality control, toolmaking, manufacturing and inspection departments. Mitutoyo Linear Height 600 ·Precision digital height measuring instrument ·Measuring range: 600 mm ·RS232 data output ·Made in Japan ·High accuracy and repeatability ·Ideal for quality assurance and manufacturing environments Measurement Capabilities ·Height measurements ·Internal and external dimensions ·Hole center distances ·Center point determination ·Step measurements ·Diameter measurements ·2D measurement applications ·Angle measurements (with optional accessories) Optional: Wenzel Precision Granite Surface Plate ·Size: 1000 × 630 mm ·Manufacturer: Wenzel Precision ·Inspection date: 07.11.1989 ·Permissible flatness deviation: 0.008 mm ·Measured flatness deviation: 0.005 mm ·Weight: approx. 280 kg An excellent solution for toolrooms, quality control laboratories, precision engineering and manufacturing facilities. *

Condition: new, Year of construction: 2025, DELIVERY IN JULY. Knedpfeitvhyex Ahisc Folding machine for bending up to 3200 mm length metal sheets. Machine with warranty for customers in Lithuania / Latvia / Estonia. Technical details: - Working length: 3200 mm - Max thickness, steel: 1,5 mm - Max thickness, stainless steel: 0,9 mm - Max thickness, aluminum: 2,2 mm - Opening height: 150 mm - Clamping beam motor: 0,75 mm - Folding beam motor: 1,5 mm Machine configuration: - Control system ProLink - Prolink screen 15.6" Tool configuration: - Kit Straight rail 30° R1 - Lower beam rail - Folding beam rail 7/10mm - Folding beam rail 15mm Back Gauge configuration: - Back gauge EGS-30 - Standard plastic cap

Condition: used, Year of construction: 2002, For sale: a professional hydraulic guillotine, AMADA PROMECAM GX 630, manufactured in 2002. Reliable industrial guillotine shears designed for precise sheet metal cutting. Maximum cutting length: 3050 mm, steel thickness: up to 6 mm. The machine is connected and fully operational; it can be inspected, tested, and trial cuts can be performed. New cutting blades were replaced approximately two years ago. The guillotine cuts accurately and cleanly. Key Information: Manufacturer: AMADA PROMECAM Model: GX 630 Year of Manufacture: 2002 Serial Number: C020110 Working Length: 3050 mm Max. Steel Thickness: 6 mm Cutting Force: 197 kN Power: 5.5 kW / 7.5 HP Power Supply: 400–415 V / 50 Hz Current: 16 A NC Control and Back Gauge The machine is equipped with an AMADA NC controller, allowing the operator to set the required cutting dimension and the number of cuts. The programmable back gauge, up to 1000 mm, automatically adjusts to the required position, making it convenient to perform repetitive cuts of the same size. Equipment: AMADA NC control system Programmable back gauge up to 1000 mm Hydraulic sheet clamping system Adjustable blade gap according to the thickness of the sheet being cut Front table extension for large sheets Front sheet support Foot pedal control New cutting blades, replaced approximately 2 years ago The machine is connected and fully operational; it can be inspected and tested. Knodpfx Ahoz A Amgeijc If you have any further questions, please do not hesitate to ask.

Condition: ready for operation (used), Grundig 665RI length measuring gauge, model ML 770 mm, serial number: 78-95201, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ksdpfoi Eacwex Ahienc

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-suspended with lift axle, axle load gauge for axle load, high-bed length approximately 4,400 mm including slope, low-bed length approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps with climbing strips on the outside, ramps for traversing on the gooseneck, additional options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, -- errors, omissions and changes excepted, sample images --, more data available at: !, More Details: ! Kodpfj Aa N T Uox Ahienc

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Knsdpfsz Slg Rox Ahisc

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Kodpfx Aez Slqishisnc Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, overall weight: 5,400 kg, total length: 2,000 mm, Equipment: CE marking, documentation/manual, This TRUMPF TruBend 3066 press brake features a pressing force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis back gauge (X/R/Z1/Z2) and operates with a rapid traverse speed of 200 mm/s. If you are looking for high-quality bending capabilities, consider the TRUMPF TruBend 3066. • Y-axis stroke: 200 mm • X-axis stroke: 600 mm • R-axis stroke: 150 mm • Back gauge axes: X / R / Z1 / Z2 (4 axes) MOTORIZED Knodpfx Aez Sqqtehijc • Pressing force: 660 kN • Bending length: 2600 mm • Usable open height: Minimum clearance 167 mm • Maximum table-to-beam distance: 347-432 mm, depending on tooling • Throat depth: Approximately 400-420 mm • Beam inclination/parallelism: ±3 mm • Y-axis rapid traverse speed: 200 mm/s • Y-axis working speed: 15 mm/s • Y-axis return speed: up to 200 mm/s • Positioning accuracy (Y-axis): 0.01 mm • Mains power supply: 400 V / 50 Hz • Connected load: 15 kVA PNEUMATIC TOOL CLAMPING, WILA TYPE BEND GARD UNDER TRUMPF MAINTENANCE

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Knedeit I Sbopfx Ahisc Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Including saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Panel cutting size (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60

Condition: used, functionality: limited functionality, machine/vehicle number: -, Comprehensive and diverse package of specialized laboratory, measuring, and testing equipment. The set comes from a professional laboratory/quality control department and includes several dozen items essential for testing physical properties, performing precise measurements, monitoring the work environment, and diagnosing machinery. The package includes equipment from renowned brands (including Voltcraft, Elcometer, Mitutoyo, Festo, SMC, and Balluff), which guarantees high reliability and measurement accuracy. Electronic measuring instruments: multimeters, infrared thermometers (pyrometers), including Voltcraft, conductivity meters, pH meters, digital light meters (including UV), and lux meters. Specialized and non-destructive testing (NDT): advanced Elcometer coating thickness gauge (model 456), test panels for penetrant testing (including Sherwin PSM-5), optical refractometers, and image quality indicators (IQI). Precision mechanics and standards: a comprehensive collection of gauges (plunger, ring, and thread gauges, including Leitech), surface roughness standards (including castings), and roughness testers (e.g., Mitutoyo SJ-210). Knsdpoz Suxhofx Ahisc Automation and pneumatics: air preparation units (filter-regulators with lubricators) from Festo and SMC, pneumatic grippers (Schunk), actuators, valves, Balluff switching mechanisms, and inverters (Invertek Optidrive). Accessories and consumables: hydraulic gear pump, lathe chucks (Sandvik), machine rubber bumpers (Haas), steel ball bearings, hanging scales. Location: 41-200 Sosnowiec, Poland Transportation: Transportation is possible throughout Poland and Europe, subject to prior agreement. Additional photos, videos, and transportation costs are available upon request. VAT invoice available.

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Kodpfx Asz Sqmzshijnc Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Stand throat depth: 200 mm

Condition: excellent (used), For sale is a professional IVECO Magirus TS 8/8 fire pump, equipped with a powerful, gasoline engine, FIAT 156 A 2.000, with a power output of 32 kW. This robust unit is designed for intensive use – suitable for fire brigades, industrial plants, farms, technical services, municipal companies, and for pumping large volumes of water. The pump is conveniently started using an electric starter. It also has an emergency manual start option. An integrated control panel ensures easy operation. Pump Data: Manufacturer: IVECO Magirus AG Type: FP 8/8 / TS 8/8 Standard: DIN 14420 / DIN 14410 Year of manufacture: 1997 Serial number: 86385 PVR test number: 346/6/90 Nominal flow rate: 800 l/min Nominal pressure: 8 bar Pump rated speed: 2820 rpm Gear ratio: 1:1 Weight of the ready-to-use pump: 189 kg Engine Data: Manufacturer: FIAT Auto S.p.A. Engine type: 156 A 2.000 Capacity: 999 cm³ Power: 32 kW at 5000 rpm Limited operating speed: 3500 rpm Fuel: unleaded 95 gasoline Start: electric starter Emergency manual start Battery included Equipment: automatic PRIMATIC suction system two pressure gauges work light integrated fuel tank control panel with indicators RPM adjustment pump clutch discharge valves sturdy transport frame with handles The pump is in very good condition and is solidly built. It shows normal, minor signs of wear consistent with its age. The condition and completeness of the unit are accurately depicted in the photos. This is a very powerful, professional pump with a flow rate of up to 800 liters per minute – ready for fire, industrial, and agricultural applications. Knodpfx Ahez Spdhsiec Shipping on a pallet is possible.

Condition: excellent (used), Professional height gauge from the renowned Japanese manufacturer Mitutoyo. The device is designed for precise height measurement and scribing on surface plates. This model offers a measuring range up to 600 mm and is equipped with a dial indicator and fine micrometric adjustment, ensuring very precise dimensional control. The robust construction and high-quality workmanship characteristic of Mitutoyo guarantee repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator scale division: 2.5 µm • Micrometric adjustment • Stable, heavy base • Clear measuring scale — Applications: • Measurement of component heights • Scribing on granite surface plates • Dimensional inspection • Workshops, tool rooms, quality control departments — Condition: Ksdpfxsz Smxho Ahionc Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Scope of delivery: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. Knodpfx Aez Smqdshisc This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Year of construction: 2024, condition: new, functionality: fully functional, TECHNICAL DATA • Designed for beside the press operation (injection and blow moulding). • Six standard models, over 50 versions available. • Two rotor design available. Kjdpez Sqc Aefx Ahienc • Slow rotor speed (155-275 RPM). • Standard screen in stainless steel. • IP55 control cabinet and electrical motor. • Quick opening and easy cleaning. • Noise level largely within European norms EN 12012-1. Utmost application flexibility CMG launches a new series of small size beside the press granulators with connotates of high caliber. The very innovative and unique attributes of such new series are several and all contribute to obtaining the highest degree of productivity, regrind quality (homogeneous particle dimensions and absence of dust), efficiency of operation and the best application flexibility. In its standard configuration the G17 granulators are applicable to processes of injection moulding and of blow moulding. In the ET1 or ET2 configuration, they are suitable for extrusion applications. The granulation capacitiy range is from 5 kg/h up to 90 kg/h. Precision cutting The new CMG series of G17 granulators is designed to obtain the most homogeneous regrind shape and dimensions, along with little to no presence of dust. One additional very unique benefit of this new line is the ability to produce regrind with very small dimensions. The great advantage of dimensionally small regrind is the possibility to add higher percentages to the virgin material with no influence to the quality of the finished product. Small capacity systems, injection moulding machines or extruders, are equipped with small diameter plastification screws, unable to process granules with dimensions exceeding those of the virgin granule. The G17 granulators produce rigrind which is dimensionally comparable to the virgin pellet.