Used Halm Grid Resistance, U03 for sale (3,492)

Condition: used, maximum load weight: 35,040 kg, overall weight: 45,500 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 04/2027, loading space length: 16,270 mm, loading space width: 2,550 mm, loading space height: 855 mm, total length: 16,560 mm, total width: 2,550 mm, total height: 855 mm, Year of construction: 2022, Equipment: ABS, 3-axle low-bed trailer GOLDHOFER Stepstar with TELESCOPIC EXTENSION First registration 04/2022, from first owner!! Saddle load up to max. 18,000 kg Pgsdpozz Uncsfx Airot Permissible total weight (technical) 45,500 kg Length of gooseneck 3,700 mm Length of low-bed 9,300 mm + telescopic extension 3,340 mm = 12,640 mm Loading height 855 mm (-60/ +140 mm) Second loading height 895 mm (-100/+100 mm) Vehicle width 2,550 mm Excavator well length (L x W x H) 3,850 x 760 x 310 mm Wheelbase 2,250 and 1,410 mm 1-piece mechanical aluminum ramps with spring support, load capacity 24,000 kg, length 2,500 mm, width 450 mm Slider design for easy installation and removal of the ramps 1 pair of fixed wheel recesses in front of the first axle, 390 mm deep, incl. climbing strips in the slope 1 pair of fixed wheel recesses between the first and second axles, 390 mm deep, incl. climbing strips in the slope Aluminum wheel recess covers "Premium", full width 600 mm, extendable to 3,000 mm with 8,000 kg axle load Different wheel recess depths by using the wheel recess covers (depth approx. 390 and 260 mm) Angled vehicle rear end 8° over a length of 550 mm Downpipe outlet at the vehicle rear Frame finishing with corrosion-resistant zinc dust primer + cavity sealing BPW axles ECO Max Drum brakes 1st axle LIFT AXLE 3rd axle trailing steering KNORR trailer EBS with RSS driving stability control KNORR trailer information module Lighting completely LED 1 pair of additional reversing lights at the rear Load securing, gooseneck: 3 pairs of lashing rings 5,000 kg 2 pairs of side rail pockets Load securing, low-bed: 1 pair of lashing points 10,000 kg in the center of the loading area behind the gooseneck 1 pair of lashing points 10,000 kg in the center of the rear area 6 pairs of lashing points 10,000 kg in the outer frame 6 pairs of side rail pockets in the outer frame Condition 1A, very well maintained RENTING is the new BUYING; with us, it is also available immediately in a full-service rental agreement.

Condition: good (used), mileage: 1,317,315 km, power: 375 kW (509.86 HP), first registration: 10/2011, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, - Aluminum fuel tank - Work lights, rear - Work lights, front - Leaf spring suspension - Brake booster - Roof deflector - EPS - Remote central locking - Low noise - Speed limiter - Intarder - Tipping hydraulics - Load securing grid - Air-suspended seats - Particle filter - Radio/CD player - Rain sensor - Sunroof - Sleeper cab - Side door - Seat heating - Sun visor - Auxiliary heater - Tool box - Xenon lighting Technical Information Number of cylinders: 8 Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Weights Unladen weight: 8,250 kg Payload: 11,250 kg GVW: 19,500 kg Condition Technical condition: good Optical condition: good Warranty Warranty: No liability for printing and typographical errors, changes, prior sale and mistakes! Identification Reference number: 61 Vehicle number: 61 Mercedes-Benz Actros 1851 V8 / Megaspace / Tipping hydraulics / Retarder / Eu5 .: WDB9340331L559890 Transmission: Automatic Suspension: Leaf / Air Pedpfx Aoykb I Aoirjgt Climate control Retarder Engine brake Cruise control Auxiliary heater Distance hold assist Lane keeping assist Xenon lighting Euro 5 Tipping hydraulics Special equipment: Front axle load 8.0 t, Airbag driver side, Work lights, Audio system: CD radio comfort (Bluetooth), Battery 220 Ah, Bi-Xenon headlights, CB radio, Comfort cockpit, Air horn / horns on driver's cab roof, Driver assistance system: Brake assist (Active Brake-Assist), Driver assistance system: Lane keeping assist, Cab: with air suspension, Parking brake for 44 - 60 T, Fleetboard vehicle computer, Urea tank (AdBlue): 95 L, Rear axle H 8, Crown wheel 485, Interior lighting blue dimmable, Integral rear, Automatic climate control, Comfort locking system, Communication interface, Fuel tank: Main tank 450 L + Additional tank 550 L aluminum, Extendable cool box, Light and rain sensor, Aluminum rims 11.75x22.5 (ALCOA), Aluminum rims 9.00x22.5 (ALCOA polished), Roof air deflector incl. wind deflector, Air compressor 2-cylinder, Mercedes star, illuminated, Mounting plate / saddle plate 40 mm for saddle coupling, Retarder Voith, Sliding/lifting roof electrically (glass), Side panel aerodynamically shaped, Seats in the cab: Co-driver seat sprung seat with air conditioning, Seats in the cab: Driver seat sprung seat with air conditioning, Sun visor electric, 2-part, Sun visor side windows, Driver and co-driver door, Socket cab 24V, Telligent distance control, Preparation Fleetboard, Oil cooler transmission Other equipment: Emissions standard EURO 5, Axle configuration: 4x2, Trailer socket 24V / 15-pin, Exterior mirrors electrically adjustable and heated, Exterior mirror wide-angle and heated, left, Outside temperature display, Differential lock rear axle, Air pressure tank aluminum, Cab: Megaspace, Suspension: Leaf / Air, Window lift electric, Generator 80 A, Interior filter: Pollen filter, Body/superstructure: Semi-trailer tractor, Fuel tank: 400 L aluminum, Model update from 06/2008, Engine 16.0 L - 375 kW V8 Diesel (OM 502 LA), Engine brake with constant throttle, Wheelbase 3900 mm, Spare wheel lifter laterally, Saddle coupling: Height 150 mm, Disc brakes, Telligent...

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Pedpfx Aijz Dmn Rersgt Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 08/2026, fuel type: diesel, next inspection (TÜV): 03/2028, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,100 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * Hill start assist * Exhaust system, EU6e (EC) * Preparation for trailer hitch * One towing eye in the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling sideways Pgsdpez Ddrtjfx Airjt * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirrors, left and right, convex, with integrated LED turn signal and wide-angle view * Front-wheel drive * Emergency braking assistant * Electronic parking brake * ESP with electronic differential lock, anti-slip control (ASR), and ABS * High roof, painted in vehicle color * Immobilizer, electronic * Parking assistance system (PDC) front and rear * Entry grips on the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with automatic driving lights, and coming home/leaving home function * Electrical connection block and preparation for tow-away protection device (KFG) * Premium interior noise reduction measures * 4-cylinder diesel engine, 2.0L, type 03N.G * ACC Stop & Go * 8-speed automatic transmission * Glove compartment with lockable flap, illuminated * Entry grip on the partition in the cargo area * "Climatronic" air conditioning in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Traffic sign recognition * Rear view camera system with dynamic guide lines * "Light Assist" high beam assistant * Leather multifunction steering wheel, heated, with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Digital instrument cluster * Driver alertness and fatigue detection system * MAN SmartLink * 4-cylinder turbo diesel engine, 2.0 l/130 kW (4V) * Fog lights with cornering function * MAN Connect * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * 12V socket, cup holder * Tire pressure monitoring system * Tire repair kit: 12-volt compressor and tire sealant * All-season tires * Long wheelbase 4,490 mm * Three-point automatic safety belts with height adjustment * Rear swing-out doors with enlarged opening angle * Heat-insulating glazing * 12V socket in the cab (in the instrument panel) * "ergoActive" comfort seat, left and right * Seat belt warning, electrical contact in the seat belt buckle, driver and front passenger seat * Seat upholstery in "Toronto Grid" fabric * Seat heating for driver and front passenger seats, separately adjustable * Side marker lights * 2 remote control keys * Approved as a 3.5t vehicle * Start/stop system with brake energy recuperation * Lane change assistant * Crosswind assist * Headlight cleaning system, washer fluid level indicator, heated windshield washer nozzles * Windshield wiper intermittent switch with light and rain sensor * LNFZ version with up to 3 seats * Keyless Go * Sliding door, right * Blind spot detection on both sides and exit warning * Turning assistant * Emergency assistant (active lane keeping assist, emergency assist, and traffic jam assist) * Preparation for alcohol interlock system * Intelligent speed assist * Multifunction front camera * Partition * Step lighting * Digital radio reception (DAB+) * Front axle, reinforced * Comfort telephony with LTE and wireless charging * Lashing eyes for securing cargo * Composite front windshield with heat-insulating glazing, heated * Permissible total weight 3,500 kg * Water auxiliary heater with remot

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ZP/03/2023, type of input current: three-phase, input voltage: 400 V, type of cooling: water, overall weight: 810 kg, welding power (max.): 94 kVA, nominal power: 80 kW (108.77 HP), nominal power (apparent): 80 kVA, air pressure: 6 bar, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, For sale: automated resistance spot welding cell SHILOH ZP-04, manufactured in 2023 and built around an ASPA ZPm-80 resistance spot welding machine. The base welding machine is an ASPA ZPm-80, manufactured in 2022, serial number 03510134. In 2023, the machine was integrated into a complete automated welding station ZP-04 and equipped with new control, safety, and process systems. The complete welding station was manufactured and assessed by Shiloh Industries Sp. z o.o. as a new machine in 2023 and has its own machine serial number ZP/03/2023. Technical data: - Manufacturer of welding station: Shiloh Industries - Welding machine: ASPA ZPm-80 - Station type: ZP-04 - Year of manufacture of station: 2023 - Year of manufacture of ASPA welder: 2022 - Station serial number: ZP/03/2023 - ASPA welder serial number: 03510134 - Nominal power: 80 kVA - Supply voltage: 400 VAC - Control voltage: 24 VDC - Pneumatic supply: 6-8 bar - Total machine weight: approx. 830 kg - Welding process: resistance spot welding Equipment: - Siemens S7-1200 PLC control system - Siemens SIMATIC HMI operator panel - TECNA TE550 welding controller - SICK safety system - Two-hand operator control - Additional touch-control panel - Proportional pressure control for the welding electrode - Part positioning and inspection system - Reject chute for non-conforming parts - Pneumatic control system - Optical and acoustic machine status indication - Integrated extraction / ventilation system The machine comes from an automotive production environment and was purchased from Shiloh Industries. The welding cell is complete and suitable for industrial series production. Inspection and test run are possible before purchase. Extensive technical documentation is available, including: - Electrical diagrams - Pneumatic diagrams - Operating instructions - Mechanical documentation - Safety documentation - Lockout / LOTO documentation - CE Declaration of Conformity - Machine risk assessment - ASPA documentation - TECNA TE550 controller documentation - Component documentation VAT invoice available. Transport can be arranged upon prior agreement. Pedpfx Aisz Dlbverogt Further technical information and documentation available on request.

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Pgedpfxszzfr Ee Airot Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2012, operating hours: 9,974 h, total height: 2,700 mm, total length: 7,700 mm, total width: 2,420 mm, Empty weight: 7.390 kg CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Pgjdpfx Aswnhccoiret Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Details: - └ Description: Machine gives malfunction spindle - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002032 - Operating hours: 9974 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Transport dimensions: 7700mm x 2420mm x 2700mm (l x w x h) - Transport weight [kg]: 7390kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), mileage: 356,535 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, axle configuration: 10x8, wheelbase: 7,200 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,250 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, power assisted steering, power mirror, traction control, - 4x4 - Aluminum fuel tank - Heated mirrors - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Cab - Air conditioning - Refrigerator - Air-suspended seats - Air horn - Media system - Rotating beacon - Rearview camera - Sun visor - Power take-off (PTO) - Central lubrication system Technical information Number of cylinders: 6 Engine displacement: 12,419 cc Axle configuration Maximum front axle load: 10,000 kg Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Rear axle 3: Max. axle load: 11,500 kg Rear axle 4: Max. axle load: 11,500 kg Weights Unladen weight: 19,600 kg Payload: 30,400 kg GVW: 50,000 kg Functional Body brand: RHINO REAR DUMP TRUCK WITH FLAPS 24.5 M³ Dump truck: Rear Maintenance, history and condition APK (Technical Inspection): New TÜV certificate upon delivery Technical condition: very good Optical condition: very good Identification Registration number: 32-BNJ-7 MAN TGS 50.500 10x8 BLH WS + RHINO 24.5 M³ HARDOX REAR DUMP TRUCK First registration: 08.04.2019 Registration number: 32-BNJ-7 Mileage: 356,535 km Drive: 10x8 Power: 500 hp Transmission: Automatic Cab: Day cab MOT / APK valid until: 06-2027 Available: 2 identical vehicles For sale is an exceptionally robust and well-maintained MAN TGS 50.500 10x8 BLH WS 5-axle truck, equipped with a sturdy RHINO 24.5 m³ rear dump truck made of wear-resistant HARDOX steel. This vehicle was specifically designed for the most demanding operations in the construction, earthmoving and transport sectors. The powerful 500 hp engine, 10x8 drive, large wheels and hydraulically sprung and steered rear axles provide excellent traction, stability and maneuverability – even under difficult operating conditions. CHASSIS & DRIVE * MAN TGS 50.500 * Heavy-duty 5-axle chassis * 10x8 drive Pgodpfxszzn Ehe Airjt * 500 hp * Automatic transmission * Large wheels / heavy-duty off-road design * Rear axles hydraulically sprung * Rear axle hydraulically steered * Excellent traction on difficult terrain * Very good maneuverability despite 5-axle chassis * Central lubrication system * DIN mounting plate on the front of the vehicle * Rotating beacons RHINO 24.5 M³ HARDOX REAR DUMP TRUCK The vehicle is equipped with a very robust and heavy-duty RHINO rear dump truck. * Volume approx. 24.5 m³ * Rear tipping * Dump bed made of wear-resistant HARDOX steel * Very robust and durable construction * Aluminum cover flaps * Suitable for intensive professional use * Suitable for heavy bulk goods * Ideal for earth, sand, stones, construction debris and other heavy materials The combination of the heavy-duty 10x8 chassis and the robust HARDOX dump bed makes this MAN particularly suitable for demanding earthmoving, construction and infrastructure work. CAB & EQUIPMENT * MAN day cab * Air conditioning * Automatic transmission * Comfortable...

Condition: new, power: 427 kW (580.56 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-sprung seats - Air horn - Metallic paint - Particulate filter - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cabin - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Auxiliary heating system - Toolbox - Windshield Internal number for customer inquiries: 4-185 Chassis in stock -> Ready-to-use vehicle with timber platform body and loading crane from our stock selection within 3 weeks!!! MAN TGX 26.580 6x4 BL with short timber body & timber loading crane according to your specifications or from stock! Vehicle description: * Cab GM: the spacious (wide, long, medium height) * LED headlights * LED daytime running lights, fog lights, position lights and tail lights Podpfxszik Uzj Airegt * Stone guard for headlights, coarse mesh * Protective roof for rear lights * Suspension leaf spring/air * Drive 6x4 * Wheelbase 4,500 mm + 1,350 mm * Tire size front 385/65R22.5, rear 315/80R22.5, trailer 315/80R22.5 * Engine D3876LF11 - 580 hp / 427 kW EURO 6d SCR 2900 Nm * MAN TipMatic 1230 OD, with retarder 35 * Differential lock in rear axle * Fuel tank aluminum 390l + 80l AdBlue * Trailer coupling ROCKINGER 500 G 6A * Central locking with remote control * Glass sunroof, electric * All exterior mirrors electrically adjustable and heated * Additional cab insulation, thermal and acoustic * Auxiliary heater * Air conditioning, Climatronic * Digital axle load display (ALM) in the cab for air-sprung axles * Display in instrument panel for trailer data (axle load) * Cool box under bunk, fully retractable * MAN EasyControl control panel, 4 functions, can be operated from the outside when the door is open: work lights, auxiliary drive, engine start/stop and hazard warning lights * High-performance engine brake MAN EVBec, steppable * MAN EasyStart hill start assist * Driver and co-driver comfort seats, air-sprung, with lumbar support, shoulder adjustment, heating and seat ventilation * Multifunction steering wheel, leather, adjustable height and tilt, with parking position * Front cooler protection, grid * Bumper, steel, 3-piece * 2 bunks * Storage compartment on the back of the cab with flexible gooseneck lamp, control module, alarm clock and charging station * MAN Media System Navigation Professional 12.3 inches * Navigation SD card EUROPE * Smartphone integration * Infotainment control MAN SmartSelect with touchpad and direct selection buttons * Lane departure warning LDW * Driver attention alert MAN AttentionGuard * GSR equipment: rear view camera, turning assistant, tire pressure monitoring, emergency braking assistant, etc. * and more Superstructure: PAVIC OPTIPA steel short timber body 6800mm loading length with aluminum front panel 4 OPTIPA SL timber bolsters with 8 OPTIPA AL10 aluminum frames Access ladders Toolbox and more Loading crane: according to your choice: Palfinger Epsilon TZ15 9.8 or Palfinger Epsilon Q150Z 9.6 alternatively TajfunLIV 150Z 9.6 or TajfunLIV 150Z 9.6 cabin crane...

Condition: excellent (used), L-Sealer with Shrink Tunnel For sale is a professional, semi-automatic L-sealer with an integrated shrink tunnel from the quality Italian manufacturer Pactur. It is ideally suited for the fast, professional shrink-wrapping of cardboard boxes, books, bottles, textiles, and other packaged items. The Ladypack 80/SI model is distinguished by its exceptional flexibility and very large sealing frame. It combines the sealing and shrinking processes into a single, compact, mobile unit, saving a significant amount of space on the production floor. Impulse Sealing System: The L-sealer operates using a Teflon-coated sealing wire. It produces clean, extremely strong seals without generating smoke. Efficient Shrink Tunnel: The integrated tunnel features a closed-loop air circulation system with adjustable air deflectors. This ensures perfectly uniform heat distribution and a flawlessly smooth shrink finish—even with complex product shapes. Precise Digital Control: The clear control panel allows for exact adjustment of sealing time, sealing wire cooling time, and tunnel temperature to match the specific film thickness and type (PO, PE, or PVC) being used. Heavy-Duty Conveyor Belt: The tunnel is equipped with a durable, heat-resistant metal mesh conveyor belt. It reliably transports even heavy items (e.g., printed materials, canned goods, or wooden components). Ergonomic Infeed Table: The separate, mobile preparation table allows for quick and easy insertion of products into the center-folded film. The film roll unwinds smoothly on ball bearings. Ideally suited for print shops, logistics centers, laundries, or contract packers for shrink-wrapping: - Cartons and multipacks - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle packs and cans Technical Specifications & Features: Pgodjz Dtf Aepfx Airst Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 Series Type: L-sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packages) Control system: Digital control unit for precise adjustment of sealing time and tunnel temperature Conveyor: Robust, heat-resistant metal mesh belt in the shrink tunnel Mains voltage: 380 V / 3-phase Max. power consumption: 11.5 kW Mobility: Entire system and the separate infeed table are mounted on sturdy swivel casters Max. film roll width: 700 mm Max. film roll diameter: Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (determined by the tunnel opening height) Net weight: approx. 400 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 280 mm, number of axes: 4, This 4-axis MORBIDELLI A644S FTP 41 PC was manufactured in 2015. It features an impressive X-axis travel of approximately 4,400–4,500 mm and Y-axis travel of approximately 1,350 mm. The machine is equipped with a CNC milling spindle and an automatic tool changer, ensuring efficient processing. If you are looking to get high-quality CNC processing capabilities, consider the MORBIDELLI A644S FTP 41 PC machine we have for sale. Contact us for further details. Pedpfsz Dwawox Airogt • Work table: Vacuum clamping system • Spindle: CNC milling spindle • Tool changer: Automatic Additional equipment • Vacuum pump: approx. 250 m³/h

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, Used SCM Pratix S 15 - Year: 2012 - Available in January 2026 - 3 axes - Drill head Pgodpfx Ajxl D Slsirst - Videos available

Condition: used, mileage: 179 km, power: 130 kW (176.75 HP), first registration: 09/2026, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2029, color: silver, gearing type: automatic, number of seats: 7, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 2,200 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, central locking, navigation system, High-roof panel van, mixed-use, 7-seater, new vehicle, immediately available, special model Urban, with 5-year manufacturer's warranty up to a maximum of 100,000 km. Hill start assist Emission standard EU6 (EC) One towing eye in the front Tow hitch, fixed Airbag for driver and front passenger, with front passenger airbag deactivation Roof rack with storage compartments, two 1-DIN compartments, and reading light Sun visors that fold down and swivel to the side Exterior mirrors, electrically adjustable and heated Left exterior mirror, convex, with integrated LED turn signal and wide-angle view Right exterior mirror, convex, with integrated LED turn signal and wide-angle view All-wheel drive 4x4 Emergency brake assist Battery 520 A (92 Ah) Electronic parking brake AGM battery (520A 92Ah) and generator On-board tools ESP with electronic differential lock, ASR, and ABS Operating voltage 12 V Stone chip protection (without CO2 optimization) H3 high roof, painted in vehicle color Suspension, damping, and stabilization, standard Differential lock on the rear axle (manually switchable, mechanical) Immobilizer, electronic Parking assist system (PDC), front and rear Grab handles on the rear pillars USB Type C data and charging port with increased charging performance Digital tachograph (Smart TCO 2.0) with preparation for Toll Collect with DSRC antenna Daytime running light with assistance light KFG Interior noise damping, premium Alternator, three-phase, 140 A Cruise control 8-speed automatic transmission, 4x4 Glove compartment with lockable, illuminated lid Rear wing doors without window openings Grab handle made of plastic on the B-pillar in the passenger compartment Manual air conditioning system Climatic in the driver's cab Halogen double headlights LED interior lighting concept in the passenger/cargo area Console on the dashboard for tachograph or special equipment Safety interior mirror, dimmable Child safety lock Traffic sign recognition Rear view camera with dynamic guidance lines Radiator grille, black, with chrome trim Left-hand drive Leather multi-function steering wheel with Tiptronic 4 speakers, 2 tweeters, 2 woofers MAN Smart Link Digital instrument cluster Driver attention and fatigue detection with driver monitoring Fog lights, including cornering lights MAN Connect (call services) with OCU3 low Wheel covers for light alloy wheels 4 light alloy wheels, 6 1/2 J x 17, with 1200 kg load capacity, black MAN Media Van (10.4-inch) 12 V socket, cup holder Tire pressure monitoring system Tires 235/60R17C 117/115R, rolling resistance optimized Tire repair kit, 12-volt compressor, and tire sealant All-season tires L 3 standard Three-point automatic safety belts with height adjustment 3-button module Pedpjzvkf Hefx Airegt Hinges for rear wing doors 12 V socket in the driver's cab (in the instrument panel) Comfort seat, left Double passenger seat, right, with storage compartment Seat belt warning, E-contact in the seat belt buckle Seat covers in synthetic leather mesh 2 remote keys Registration as 3.5t Start/stop system with brake energy regeneration Crosswind assist Windshield wiper intermittent control with light and rain sensor Keyless GO Sliding door, right Active lane keeping assist Preparation for alcohol interlock Intelligent speed assist Multi-function camera Digital radio reception, DAB+ First aid kit and warning triangle Front axle, 1,800 kg load capacity Side window in the passenger/cargo area, front left, permanently installed Side window in the passe

Condition: used, mileage: 64,900 km, power: 109 kW (148.20 HP), first registration: 06/2015, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,600 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sales preferably to commercial customers. Internal ID number: [3398] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German technical inspection) & emissions test Pgjdpfx Aszc Dn Noirjt * Nationwide delivery * Financing possible, even without a down payment * Spring offer: Upon request and for a surcharge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * Immediately ready for use * Accident-free * High and long * Trailer hitch up to 3,500 kg possible * Reinforced springs * Rear-view camera * Automatic climate control * Bluetooth multimedia system * Navigation system * Cruise control * LED daytime running lights * Metallic paint * Alloy wheels * Chrome package * Comfort equipment * 3 seats Special equipment: Storage compartment in the roof lining of the driver's cab, dashboard "Techno", exterior mirrors electrically adjustable and heated, cruise control system including speed limiter, rear wing doors with glazing, heated rear window, infotainment system: UConnect with CD and MP3 player, with navigation unit, automatic climate control, upholstered headrests, black radiator grille frame, cargo area partition with window, light alloy wheels 6x16 (V-spoke), metallic paint, smoker's package, full-size spare wheel (including spare wheel holder), headlight surround black, sliding door load/passenger compartment right with glazing, seats in the driver's cab: double passenger seat, bumpers in vehicle color, daytime running lights LED, rear-view camera, tinted glazing, decorative strip front bumper in aluminum look Other equipment: Driver's airbag, turn signals integrated into the exterior mirror, brake assistant, body/structure: high-roof box van standard, body variant: high roof, crankcase ventilation heated, cargo area partition (grid) behind the driver, steering column (steering wheel) adjustable, engine 2.3 L - 109 kW JTD CAT, wheelbase 3450 mm, tire repair kit, low emission according to exhaust standard Euro 5, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: passenger seat adjustable with armrest and lumbar support, seats in the driver's cab: driver's seat height adjustable, seats in the driver's cab: driver's seat with armrest and lumbar support, water sensor fuel filter, oil level sensor. ----Do you want to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the internet is non-binding and serves only for the general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or by written assurances. Vehicles with a mileage of more than 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: excellent (used), Year of construction: 2022, operating hours: 339 h, functionality: fully functional, machine/vehicle number: 22016009-T, tank capacity: 60 l, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 470 kg, year of last overhaul: 2022, water tank capacity: 280 l, Equipment: rotational speed infinitely variable, ERBA Turbo 60 W Centrifugal Grinding System – only 339 operating hours, including cascade system and sieve vibrator For sale is our ERBA Turbo 60 W centrifugal grinding system for wet processing. The system was purchased in 2022 but has only been used sparingly since then. With only 339 operating hours, it is in very good used condition. Pgedpjz D Sr Isfx Airst The reason for the sale is that we need the space for newly acquired equipment. Technical data and features: - Container volume: 60 liters - Turntable speed: continuously adjustable from 0 to 300 rpm - Motor power: 3.0 kW - Operating voltage: 400 V / 50 Hz - Work container and turntable with highly wear-resistant PU lining - Electric tilting device for the processing unit - Dosing pump for liquid process additives - Timer for setting the processing time - Frequency inverter for stepless speed control Accessories included in the offer: - ERBA cascade system: 280-liter tank with three chambers and a circulation pump for the circulation and reuse of the process water. - ERBA sieve vibrator YE 50: Separate sieve unit with a sieve area of 1,385 × 530 mm and a main sieve made of PE. With a discharge for grinding media in the direction of flow, a lateral discharge for small particles, and a frequency inverter for stepless adjustment of the motor speed. A little-used system with extensive equipment for wet lapping. If you are interested, we look forward to hearing from you.

Condition: good (used), mileage: 130,465 km, power: 265 kW (360.30 HP), first registration: 03/2013, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel, Year of construction: 2013, Equipment: AdBlue, Bluetooth, EBS, air conditioning, crane, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - EPS - Low noise - Tipping hydraulics - Particle filter - Radio/CD player - Sunroof - Side door - Toolbox = Further Information = Suspension: Leaf spring Front axle: Steerable Number of cylinders: 6 Pgedoz Abhfepfx Airet GVWR: 33,000 kg Crane: Fassi F155A0.22 Active, year of manufacture 2013, behind the cab Technical condition: good Optical condition: good Vehicle number: 123 Mercedes-Benz Actros 3336 / Tipper + Fassi F155 / Bordmatik / Euro 5 / 130,000 km .: WDB9321631L727408 Suspension: Leaf / Leaf Transmission: Semi-automatic Air conditioning Engine brake Cruise control Euro 5 130,000 km 2-sided tipper with Bordmatik system Crane: Brand: Fassi Type: F155A0.22 Year: 2013 Special equipment: Storage compartment on engine tunnel, trailer socket 15-pin 7+7-pin, audio system: CD radio (Bluetooth), exhaust pipe raised behind cab, exhaust pipe raised behind cab, variable, air horn, cab: cab entrance movable, cab: comfort suspension (1.8 Hz), transmission 16-speed, air filter: filter for construction site vehicles, air filter: enlarged paper air filter, parameterizable special module, sun visor, socket in cab 24V, stone guard grid, front bumper in steel design, warning sound for reverse gear, oil cooler for transmission Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2 - line, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, battery 165 Ah, roof hatch (steel), differential lock rear axle, cab: M (medium length), suspension: leaf / leaf, generator 80 A, rear axle H 7, 13 t, crown wheel 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, fuel tank: 300 L, model upgrade from 06/2008, engine 12.0 L - 265 kW V6 Diesel (OM 501 LA), engine brake with constant throttle, auxiliary drive MB 2C, wheelbase 3900 mm, rear window, disc brake front axle, seats in cab: driver's seat, sprung seat, standard, steel rims 9.00x22.5, Telligent - gearshift, drum brake rear axle, preparation for CB radio, preparation for telephone/fax, front axle straight, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 33.0 t No liability for printing and typographical errors, changes, prior sales and errors! = Company Information = No liability for printing and typographical errors, changes, prior sales and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Work in X, Y, Z axes Working area 3100 x 1340, Z axis = 180 mm Pgodjz D Tggopfx Airst Horizontal drills on X axis – 6 pcs Horizontal drills on Y axis – 4 pcs Vertical drills on X axis – 8 pcs Vertical drills on Y axis – 6 pcs Two tool magazines: side – 11 positions and transfer – 14 positions Grooving saw on X axis Spindle 8 kW, air-cooled, 600–24,000 RPM, HSKF63 Becker Vacuum Pump 2.2 kW Option for dual-field operation X axis speed – 25 m/min (programmable) – 56 m/min (vector) Y axis speed – 50 m/min (programmable) – 56 m/min (vector) Z axis speed – 15 m/min

Condition: reconditioned (used), Year of construction: 2019, operating hours: 335 h, functionality: fully functional, working width: 850 mm, area performance: 4,200 m²/h, overall weight: 480 kg, warranty duration: 12 months, water tank capacity: 85 l, Hako Scrubmaster B90 CL TB850 Scrubber-Dryer New SIAP 6V 175Ah gel batteries (4x) 2019 model year; 335 operating hours 850mm cleaning head (TB850) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose A new suction motor ensures high water extraction power from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 850 Squeegee working width (mm): 1100 Theoretical coverage (m²): 4200 Working speed (km/h): 5 Tank capacity (l): 85/85 Weight (kg): ~480 Power (kW): 2.6 INCLUDED: NEW 6V 175Ah SIAP gel batteries (x4) NEW 445mm PPL 0.5 disc brushes (x2) Psdpfx Aiez Eizisrjgt NEW 24V 600W suction motor NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal fluid (5 liters) – FREE KEY FEATURES: The 85-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design makes it highly maneuverable; a tight turning radius allows for operation in narrow passages and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. The wide working width (850 mm) ensures high area coverage. The control panel is highly legible and intuitive to operate.

Condition: used, mileage: 114,880 km, power: 55 kW (74.78 HP), first registration: 02/2016, fuel type: diesel, overall weight: 1,945 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 4,380 mm, total width: 1,810 mm, total height: 1,862 mm, loading space length: 1,800 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0622. N506309 ----EQUIPMENT * Exterior mirrors, electrically adjustable, heated and foldable * Trailer hitch with fixed ball head * Air conditioning with pollen filter * City Design Package 2 - 7-inch touchscreen - storage compartment (for double cab) - on-board computer - Connecting Box (Bluetooth hands-free system with USB port) + AUX input - parking assist system, acoustic, rear with reversing camera - radio, tri-tuner with MP3 * Partition, half-height, with grid, sound insulation and pass-through hatch * Transmission: 5-speed manual * ABS with electronic brake force distribution and mechanical brake assist * Storage compartment above the front seats * Airbag, driver side * Floor covering: plastic floor in the passenger compartment * Dome light in the cargo area * Rev counter * Three-point seatbelts * Electronic stability program (ESP) with traction control (ASR) * Speed limiter/cruise control * Headrests (3), front * Paintwork: solid color * Ladder rack Pgodoz D N N Dopfx Airet * Steering wheel with height and reach adjustment * Headlight range adjustment, manual * Package: Electric - exterior mirrors, electrically adjustable and heated - front power windows with comfort operation - central locking with remote control * Package: Ergonomics - storage compartment between driver and passenger seat - driver's seat with height adjustment - storage compartment under the driver's seat * Particle filter: diesel particulate filter * Upholstery: fabric * Side protection strips, black * Power steering * Seat: passenger seat bench "Extenso" with folding table in the middle backrest incl. document holder * Seat: driver's seat with longitudinal and backrest adjustment * Doors: rear hinged doors, sheet metal * Doors: sliding door, right side * Lashing eyes, 6-fold in the cargo area * Immobilizer * Central locking with remote control - automatic door locking when driving - separate locking of the cargo area and driver's cab... and more. ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: excellent (used), MasterWood machining center - 3200mm travel Complete with gantry and drilling unit Includes a horizontal head for milling operations Machine with few operating hours See specifications in the attached PDF. Pedpfxoz Ef Sqo Airogt

Condition: reconditioned (used), Year of construction: 2023, operating hours: 36 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 TB510 Scrubber-Dryer New SIAP 12V 105Ah gel batteries (2x) 2023 model year; 36 hours of operation 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger simplifies daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and a new suction hose New suction motor ensures high water pickup performance from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown Pgodsz Eh R Nspfx Airst TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah gel batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing work interruptions for refilling The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: used, mileage: 633,000 km, power: 200 kW (271.92 HP), first registration: 10/2015, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, loading space length: 7,990 mm, loading space width: 2,490 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Mercedes Benz Atego 1527 Flatbed with Sideboards, Euro 6 For inquiries: 0926825 * Condition: very good * Power: 200 kW / 270 hp * Engine displacement: 7,698 cc * AdBlue * ABS * ASR * ESP * Differential lock, rear axle * Audio system: CD radio (Bluetooth) * Roof hatch, mechanical * Driver's seat, comfort suspension seat * Sun visor, exterior, transparent * Rotating beacons on the roof * Emission standard: EURO 6 * Axle configuration: 4x2 * Exterior mirrors, electrically adjustable and heated * Suspension: leaf spring / air * Power windows * Underrun protection * Storage box, left side / plastic * Storage box, right side / plastic Body: Flatbed * Sideboards * Wear-resistant wooden floor Dimensions (cargo space/loading area) Cargo space length: 7,990 mm Cargo space width: 2,490 mm Cargo space height: 600 mm Pgedpfjz Ewv Ijx Airst Tires: Front axle: 305 / 70 R 19.5, 30% leaf-sprung Rear axle: 305 / 70 R 19.5, 30% air-sprung ----Price: €19,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors, and prior sale are subject to change.

Condition: new, mileage: 50 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, total length: 7,400 mm, total width: 2,400 mm, total height: 2,200 mm, loading space length: 4,800 mm, loading space width: 2,100 mm, Year of construction: 2026, Equipment: ABS, central locking, electronic stability program (ESP), The new Citroën Jumper – the reliable partner for your daily work. With its modern design, generous cargo space, and high functionality, it supports you in every challenge. Whether for trades, transport, or service operations, the Jumper impresses with its comfort, efficiency, and versatility, ready to accompany your company every day. Standard equipment: central locking with remote control * Electrically adjustable exterior mirrors * Electric front windows * Front armrests * Shift paddles on the steering wheel * Air conditioning * Radio * DAB receiver * Hands-free system * Bluetooth * Touchscreen * ABS * ESP * Stability control * ASC (traction control) * ASR (traction slip regulation) * Power steering * Light sensor * Emergency brake assist (F.A.) * Lane keeping assist * Blind spot assist Pgsdpey U Stxsfx Airot * Traffic sign recognition * Fatigue warning system * Cruise control * Speed limiter * Electric immobilizer Including additional options: * Artense Gray (metallic) * Fabric upholstery Crepe Black + backrest pattern * Techno Visibility Plus Package J6XK * 10" Audio-NAV system with touchscreen + DAB + Apple CarPlay & Android * Auto + Double * USB charging port + Connected Services ZJB5 * Automatic climate control RE07 * Visibility Plus Package J6MV * All-weather tires MI32 * Digital tachograph HC09 * Driver's seat, sprung (suspension seat) RH16 * Extended wiring harness at the rear KY06 * Reinforced suspension (double leaf spring suspension - rear) SE08 Body: * Tow truck body with loading ramp, breakdown assistance vehicle * Storage box "Tranutec" * LED work light * Trailer coupling 3.0T * Winch "Pundmann" * Additional air suspension on the rear axle * Warning light bar on the roof * TÜV §13 StvZo (German Road Traffic Licensing Regulations) Tranutec - The commercial vehicle professional! We offer you 15 years of experience with commercial vehicles! In addition to top prices, we offer you tailor-made solutions for your requirements. For example, as additional equipment ex works from Tranutec: * Leaf guard grid * Side panel extensions * Tarpaulin bar * Warning light bar * Trailer coupling (short for three-sided tipper, prevents damage to the side panels) * Storage box attachments etc. * Municipal conversion Contact us! We will gladly make you an offer according to your requirements. ---- WE ARE A CITROËN - CONTRACT PARTNER and body manufacturer 2 years manufacturer's warranty from initial registration without mileage limitation We will gladly inform you about further desired equipment and special solutions as well as financing and leasing offers. Images may show a model example, not binding. Changes, errors and prior sale reserved! All information is non-binding. Although checks are carried out, a deviation of the vehicle (e.g. with regard to technical data, equipment, material and external appearance) from the description above cannot be ruled out, we would like to point out that the subject of the contract will be exclusively the motor vehicle in its actual condition.

Condition: new, mileage: 15 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, total length: 7,400 mm, total width: 2,400 mm, total height: 2,200 mm, loading space length: 5,000 mm, loading space width: 2,100 mm, Equipment: ABS, central locking, electronic stability program (ESP), The new Jumper. The Citroen Jumper – a reliable partner for your business. Unbeatable price-performance ratio. Standard equipment: central locking with remote control * Electrically adjustable exterior mirrors * Electric front windows * Front armrests * Shift paddles on the steering wheel * Air conditioning * Radio * DAB receiver * Hands-free system * Bluetooth * Touchscreen * ABS * ESP * Stability control * ASC (traction control) * ASR (drive slip control) * Power steering * Light sensor * Emergency braking assistant (F.A.) * Lane departure warning system * Blind spot monitoring system Psdjzi H U Rjpfx Airogt * Traffic sign recognition * Driver drowsiness detection * Cruise control * Speed limiter * Electronic immobilizer Including additional options: * Ice White P0PR * Fabric upholstery Crepe Black + backrest pattern * Techno Visibility Plus package J6XK * 10" audio-navigation system with touchscreen + DAB + Apple CarPlay & Android * Auto+Double * USB charging port + Connected Services ZJB5 * Automatic climate control RE07 * Visibility Plus package J6MV * All-season tires MI32 * Digital tachograph HC09 * Driver's seat with suspension (vibration-dampening seat) RH16 * Extended wiring harness at the rear KY06 * Reinforced suspension (double leaf spring suspension at the rear) SE08 Superstructure: * Tow truck superstructure with loading ramp, breakdown assistance vehicle * Storage box "Tranutec" * LED work lights * Trailer coupling 3.0T * "Pundmann" winch * Additional air suspension on the rear axle * Warning light bar on the roof * TÜV §13 StVZo approval Tranutec – The commercial vehicle professional! We offer you 15 years of experience with commercial vehicles! In addition to top prices, we offer you tailor-made solutions for your needs. For example, as additional equipment ex-works from Tranutec: * Leaf guard grid * Side panel extensions * Tarpaulin bow * Warning light bar * Trailer coupling (short version for three-sided tipper, prevents damage to side panels) * Storage box attachments, etc. * Municipal vehicle conversion Contact us! We will gladly provide you with an offer according to your requirements. ---- WE ARE A CITROËN - CONTRACT PARTNER and superstructure manufacturer 2-year manufacturer's warranty from initial registration without mileage limitation We will gladly inform you about further optional equipment and special solutions as well as about financing and leasing options. Images may show a model example and are not binding. Subject to changes, errors and prior sale! All information is non-binding. Although checks are carried out, a deviation of the vehicle (e.g. with regard to technical data, equipment, material & external appearance) from the description above cannot be excluded, we would like to point out that the subject of an agreement will exclusively be the motor vehicle in its actual condition.

Condition: refurbished (used), Year of construction: 2013, operating hours: 50 h, functionality: fully functional, workpiece weight (max.): 500 kg, table diameter: 450 mm, total length: 7,200 mm, gear diameter: 500 mm, total height: 3,300 mm, total width: 4,500 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 240 mm, spindle speed (max.): 450 rpm, table bore: 125 mm, spindle speed (min.): 100 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 16,800 kg, distance table to spindle center: 710 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase. Pgsdpfxsz Et E Ee Airot