Used Hammelmann Hdp 127 for sale (725)

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Hedpfxovuugis Ahvsfh Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, mileage: 179,000 km, power: 85 kW (115.57 HP), first registration: 12/2019, fuel type: diesel, maximum load weight: 800 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,150 mm, loading space width: 2,100 mm, Year of construction: 2019, Used Truck: Iveco Daily 35C12 Double Cab, 7 seats – 3m Tipper Bed – Year: December 2019, Engine: 2,300 TD 115hp Euro 6, 6-speed Manual Transmission, Mileage: 179,200 km. GVW: 3,500 kg, Payload: 800 kg, Twin Rear Wheels. Configuration: Rear tipper bed, external dimensions 3,150 x 2,100 mm, steel drop sides h. 400 mm. Equipped with: Manual air conditioning, Radio-Bluetooth, Electric windows, Central locking, Airbag, Double keys, Spare wheel. Bodywork in good condition, clean and well-maintained interior. MOT valid until December 2025. New front and rear tires. New turbocharger, service already performed. Immobilizer alarm not functioning. Single owner vehicle. CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 Sales agents: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province), Lombardy Opening hours: Monday to Friday: 08:30–12:15 / 14:00–19:00, Saturday: 08:30–12:00 / 14:00–17:00 Certified mileage. Test drive available by appointment. Ownership transfer on site. Personalized financing options available. Hjdpfsyy Nk Sjx Ahvsfh Carlo Mauri Srl declines any responsibility for possible unintentional discrepancies in this advert, which does not constitute any contractual commitment. The prices shown are exclusive of VAT and ownership transfer costs.

Condition: used, mileage: 179,000 km, power: 85 kW (115.57 HP), first registration: 12/2019, fuel type: diesel, maximum load weight: 800 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,150 mm, loading space width: 2,100 mm, Year of construction: 2019, Used Truck: Iveco Daily 35C12 Double Cab, 7 seats – 3m Tipper Bed – Year: December 2019, Engine: 2,300 TD 115hp Euro 6, 6-speed Manual Transmission, Mileage: 179,200 km. GVW: 3,500 kg, Payload: 800 kg, Twin Rear Wheels. Configuration: Rear tipper bed, external dimensions 3,150 x 2,100 mm, steel drop sides h. 400 mm. Equipped with: Manual air conditioning, Radio-Bluetooth, Electric windows, Central locking, Airbag, Double keys, Spare wheel. Bodywork in good condition, clean and well-maintained interior. MOT valid until December 2025. New front and rear tires. New turbocharger, service already performed. Hedpfxeyiyule Ahvjfh Immobilizer alarm not functioning. Single owner vehicle. CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 Sales agents: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province), Lombardy Opening hours: Monday to Friday: 08:30–12:15 / 14:00–19:00, Saturday: 08:30–12:00 / 14:00–17:00 Certified mileage. Test drive available by appointment. Ownership transfer on site. Personalized financing options available. Carlo Mauri Srl declines any responsibility for possible unintentional discrepancies in this advert, which does not constitute any contractual commitment. The prices shown are exclusive of VAT and ownership transfer costs.

Condition: good (used), Pos. number: LTC00006745 Hedpfx Aohbvxfehvefh Make: Kugler Type: automatic 6 head in line piston filling machine Capacity: up to 6.000 bottles per hour depending on product and container size Range: up to 1.000 ml Frame: stainless steel 1.4301 (AISI 304) Dimensions: L x W x H = + 4000 x 1400 x2500 mm. Power supply: 400 Volt – 50 Hz – 3,0 kW Features: adjustable volume product tank with level detection conveyor belt with container positioning device including safety housing Tooling: machine equipped with 1 sets of nozzles for bottom filling as-is or adjusted to customer needs

Condition: new, functionality: fully functional, machine/vehicle number: 13281426, empty load weight: 290 kg, maximum load weight: 460 kg, overall weight: 750 kg, axle configuration: 1 axle, permissible axle load (axle 1): 750 kg, loading space length: 2,460 mm, loading space width: 1,270 mm, loading space height: 100 mm, total length: 4,080 mm, total width: 1,950 mm, tire condition: 100 %, trailer brake: trailer unbraked, Year of construction: 2026, Loading dimensions approx. 1270 mm x 2460 mm External dimensions approx. 1950 mm x 4080 mm Permissible total weight: 750 kg Payload: approx. 460 kg (payload may vary depending on additional equipment) Manufacturer: Vezeko Special features - Lowering trailer - 100 mm aluminium side panels (anodised) Hfedpfxoy I Uico Ahvjh - Load area can be lowered hydraulically (hand pump) - Rear end chamfered - 4 lashing eyes on outer frame - 8 lashing points in the load floor - Lockable storage box at the front - Vehicle documents included Further equipment - Floor panel: wooden floor - Wheel chock + holder Chassis - Alko | rubber spring axle | V-drawbar with ball hitch | jockey wheel Electrics - 12 Volt | 13-pin plug | side marker lights | marker lights If you would like to purchase this trailer or have further questions about trailers, please use our internal lowering trailer "No. 13281426".

Condition: ready for operation (used), Year of construction: 2019, A cold-glue labeling machine Gernep is available. Direction of travel: LM, nominal output: 5000bottles/h, control range: 1000-5500bottles/h, gluing height: 330mm, bottle format height range: 297mm-350mm, bottle format diameter range: 74mm-89mm, bottle material: glass, bottle volume: 0.75/1l, bottle content: wine, application: body/neck ring label/back label. Cold-glue format 1: label length range: 25mm-160mm, max. label height: 150mm, max. label height bottom edge/top edge: 15mm/320mm. Cold-glue format 2: min. label length: 25mm, max. label height: 115mm, max. label height bottom edge/top edge: 15mm/130mm. Including dating, optical orientation, upper-part height adjustment, glue pump and two cold-glue units. Documentation available. An on-site inspection is possible. Hfjdpey N Ddxjfx Ahvoh

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CREEMERS RCB11 270C screw compressor (ATLAS COPCO screw stage), unit mounted on a 270L tank, after service. Technical data: Capacity: 1.45 m3/min; Pressure: 10 bar; Motor: 11 kW; Operating hours: 9102 h; Year of manufacture: 2010. Hfodpeyy R Dyofx Ahveh Price: 9,200 PLN net / 11,316 PLN gross The compressor is fully functional. Service support provided.

Condition: ready for operation (used), Manual sheel metal bending machine MSW Type MSW-PBR-1270 Manual box and pan brake Operation: manual clamping system (hand operated) Heavy duty welded steel frame Specifications Max bending length 1250-1270 mm Max sheet thickness 1.5 mm (mild steel) 2.0 mm (aluminum/soft materials) Max clamping height, ca. 40-50 mm Bending angle (degrees) 0-155 Bending system: manual folding beam (lever operated) Clamping system: Hand lever activated upper beam Adjustable bending clearance for different sheet thicknesses Hsdpeyy Nxvsfx Ahvofh Weight, ca. 300 kg

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hjdpfexzfx Ssx Ahvsfh

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Hjdpjxzpxpsfx Ahvsfh

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. Hjdef Eywwspfx Ahvofh There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: excellent (used), mileage: 127,739 km, power: 120 kW (163.15 HP), first registration: 02/1999, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, emission class: euro2, loading space length: 4,080 mm, loading space width: 2,320 mm, loading space height: 390 mm, Year of construction: 1999, Equipment: crane, = Additional options and accessories = - PTO = Remarks = WMAL20Y666G136684 = More information = Empty weight: 5.760 kg Hfsdpfsymrxkjx Ahvoh Carrying capacity: 3.240 kg GVW: 9.000 kg Crane: ATLAS 60.1 Make of bodywork: ATLAS 60.1 Technical condition: very good Visual appearance: very good Registration number: 2GFS563 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, functionality: fully functional, machine/vehicle number: NEW-11, empty load weight: 546 kg, maximum load weight: 2,166 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2700 2 Rear Tipper NEW VEHICLE Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading platform height: 67cm Gross weight: 2700kg Payload: 2154kg Braked tandem trailer Overrun and hand brake by KNOTT 2x 1350kg axles with brakes Low-chassis design Fully welded, hot-dip galvanized steel frame Aluminum profile drop sides with tension locks All sides foldable and removable 15mm thick, non-slip and durable phenolic-coated plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg load capacity 6 noise-dampening lashing rings with 800kg tensile strength each Reinforced 13" C-rated tires with steel valves M+S tires Net/rope hooks on frame 13-pin plug LED position lights front Rear lamps with reversing light, fog lamp, and triangular reflector Hfedpfx Ahoghpcleveh Top frame mounted on rubber supports Large rear tipping angle of 48 degrees Hand pump with adjustable handle OPTIONAL ACCESSORIES AT PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without side panels (discount) - Side panel height increase to 35cm - Black Edition (powder-coated black side panels and rims) - Loading ramps - U-profile for attaching the original SARIS loading ramp - Electric tipping operation - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety stand for maintenance work on tipped vehicle - Complete LED lighting - Anti-theft device - Net fine or coarse-meshed - H-frame - Mesh sides in various heights, also closed - Additional 30cm side extensions with tension locks - Flat cover with or without bows - High cover 160cm or 180cm Further accessories available on request! Plus delivery to Gera and vehicle registration document €200 net Images are for example purposes and may show accessories subject to surcharge. Have you not found the right trailer yet? We have 50–100 vehicles always in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Axle repair specialist, including for caravans. Large selection of rental trailers. Additionally, we offer a large range of spare parts and accessories for trailers of all manufacturers. Call for advice, visit our website, or come by in person.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-10, empty load weight: 535 kg, maximum load weight: 1,465 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2000 2 Rear Tipper Trailer NEW VEHICLE Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading platform height: 66cm Gross weight: 2000kg Payload: 1465kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 axles with 1350kg brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tension locks Folding and removable on all sides 15mm thick, slip-resistant and durable phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg vertical load 8 noise-reducing lashing eyes with 800kg tensile strength Reinforced 13" C-rated tires with steel valves M+S tires Net/rope hooks on frame 13-pin connector Front LED position lights Rear lights with reversing light, fog light and triangular reflectors Upper frame with rubber mountings Large tilting angle of 48 degrees to the rear Hodpfoghpcpex Ahvofh Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without side walls (discount) - Side wall height extension to 35cm - Black Edition (powder-coated side walls and rims in black) - Loading ramps - Electric tipping control - Charger - Remote control - Bluetooth remote control - Emergency hand pump for use with electric operation - Safety support for maintenance when vehicle is tilted - Folding crank rear supports - Complete LED lighting - Anti-theft device - Net, fine or coarse mesh - H-frame - Mesh superstructure in various heights, also closed - Additional side walls 30cm with tension lock - Flat cover, with or without support bows - High tarpaulin 160cm or 180cm Further accessories on request! Plus shipping to Gera and registration documents: €200 net Images are for illustration purposes and may show optional accessories at extra charge. Haven’t found the right trailer yet? We have 50-100 vehicles in stock and ready for immediate collection at all times. The workshop is open weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist for axle repairs, including caravan axles. We also offer a wide range of spare parts and accessories for trailers from different manufacturers. Visit us online or stop by in person!

Condition: used, Features: * Used roller conveyor of the manufacturer Overbeck. * Very stable design * Incl. 6 SEW motors/ drive units Hfedegm T A Tspfx Ahvoh * Condition: fully functional with traces of use * Ideal for fast material transport * Professionally disassembled and packed * Plant consists of 26,3Meter * Optional: side guide Plant consists of 10 segments: 1 x 3.3 meters 3 x 3 meters 1 x 2,9 meters 1 x 2,6 meter 1 x 2,5 meter 3 x 2 meters * Price per meter Technical data: Dimensions of roller conveyor Accumulation roller conveyor with drive ca.26,3 meter Total width approx.: 510 mm Conveyor width: 440 mm distance between axes: approx. 100 mm (adjustable) Type of drive: flat belt / lug belt Material: steel, galvanized Profile height: 140 mm Color: Blue Roller conveyor The roller conveyor is ideal for interlocking machines or workstations in the picking zone and for optimizing internal processes. During transport, the roller conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the loading or delivery point and also serves, for example, as a connecting line in front of or between production and processing machines. In addition, it enables efficient parts transport in the plant and warehouse and is used to convey considerable conveying volumes and distances. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent contact. [...]

Condition: used, machine/vehicle number: 13253, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 rows Stator knives: 3 rows Hedpfjyr Txpsx Ahvofh Inlet cross-section approx. 1200 x 800 mm Drive motor: as per customer request

Condition: new, Year of construction: 2026, Folding machine with exchangeable segments. Its simple construction ensures comfortable handling. Machine characteristics The folding machine has exchangeable segments on the upper and lower part. It gives extremely broad use for big elements as well as details folding. The segments are made of pressure iron castings, resistant to deformations and of exceptionally high strength. A simple construction secures high operation comfort and a broad range of practical use. The smallest segment possible to clamp is of 25 mm size and the biggest is of 270 mm size with a possibility of place change enable folding of any shape in the quality to be achieved. The sheet metal maximum thickness is 2 mm and the possibility of opening adjustment up to 48 mm make that there is practically no limits for this model. Segment dimensions Hfodpjmtwtmefx Ahvoh 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 75 mm 100 mm 150 mm 200 mm 250 mm 270 mm Technical data WORKING WIDTH 1270 mm MAXIMAL SHEET METAL THICKNESS 2,0 mm MAXIMAL OPENING LENGTH 48 mm BENDING ANGLE 0° - 135° NUMBER OF SEGMENTS 12 pieces DIMENSIONS 1710 mm x 750 mm x 1420 mm WEIGHT 422 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Finger stitching machine with segmented top clamp Including manual back stop PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 45 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 360 KG Width ----- 1620 mm Depth ----- 850 mm Hfsdpfxsga T Dhj Ahvsh Height ----- 1175 mm

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk, solid rubber tire with rim -Tire size: 18x5x12 1/8" ( 457X127X308 ) -Hub bore: Ø 70 mm Hedpfx Ahsyx Ungjvefh -Bolt circle: Ø120 mm x 19 mm -Quantity: 1 piece available -Dimensions: Ø 460 x 130 mm -Weight: 36 kg

Condition: used, functionality: unexamined, Ferwood code: RU0007476 – Manufacturer code: R911279433 – Condition: Used – Functionality: Not tested – Compatible machine: – Weight: 8 kg – Dimensions: 70x46x34 – If interested, we offer an overhaul service, please contact us. Hedpfx Ajyztv Ushvsfh

Condition: new, number of rollers: 3, roller (bottom) diameter: 76 mm, roller (top) diameter: 76 mm, side roll diameter: 76 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 1.5 mm - Conical rolling - Removable top roller - Foot control - Emergency stop Hfjdpoh Ralqofx Ahveh - Documentation - 400V

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller diameter: 110 mm, roller length: 1,270 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1270 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement – Hardened rolls – Conical rolling – Swing-out upper roll Hfjdpjyv R Tajfx Ahvjh – Brake motor – Emergency stop – Documentation – 400V

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Type: WT11-270/70/10 Section No.: 58226018400020 Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Water-cooled temperature chamber Compressed air dryer type: ZANDER Hsdpfxov T Tncj Ahvefh Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Refrigerant: R-404A/R-23

Condition: like new (used), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: Heidenhain, controller model: TNC640, workpiece weight (max.): 1,000 kg, total height: 3,355 mm, table width: 700 mm, table length: 1,350 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5 h, coolant supply: 20 bar, distance table center to spindle nose: 130 mm, number of slots in tool magazine: 60, tool length: 250 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Equipment of Axon VMC 1270 Heidenhain TNC 640 Travel X/Y/Z – 1,200/700/700 mm Hfsdsywy Hlepfx Ahvoh 12,000 rpm Direct Drive Spindle 60-position chain magazine with double-arm gripper Heidenhain glass scales on X/Y/Z ICS (internal coolant supply) 20 bar Chip conveyor Air cooling internal/external Automatic workpiece measurement Renishaw OMP 40 Chip flushing Coolant spray gun Handwheel Air gun Status LED in machine housing

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1174x644x528 mm Hfsdpfx Ahev A Hxgjvjh Weight 151 kg Total power requirement 5,5 kw