Used Kaiser V 40 W/680 for sale (68,089)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Isdpfx Aszrwzasn Heif Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Year of construction: 2018, condition: ready for operation (used), The dry air dryer from Digicolor is available for sale; the granulate dryer operates using the dry air drying principle. 40-liter capacity on a mobile frame Compact dryer footprint Simple setup and operation Consistent dry air dew point Optimization of all drying parameters Energy-efficient drying technology No compressed air or cooling water required Dust-free dry air through adsorption rotor technology Iisdjywh E Aopfx An Hjf Antistress function, SmartMode, no overdrying of plastic granulate

Condition: good (used), Year of construction: 2014, 2014 Donaldson Torit Dust Extractor CPV4 Model 21640 Iiodpszt Iy Aefx An Hof Airflow Capacity 1,400-2,700cfm Using 4 Advanced PowerCore Filter Packs. Overall Dimensions L1,297 x W1,264 x H1,016mm. Weight 261kg. S/No. 4482926 L1.

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, spindle speed (max.): 8,100 rpm, spindle motor power: 22 W, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, Travel distances X-axis: 2134 mm Y-axis: 813 mm Z-axis: 762 mm Distance spindle nose – machine table (~ max.): 864 mm Spindle nose to table (~ min): 102 mm Spindle Max. rated power: 22.4 kW Max. speed: 8100 rpm Max. torque: 122.0 Nm at 2000 rpm Table Length: 2134 mm Width: 711 mm Max. table load capacity (evenly distributed): 1814 kg Tool changer 30+1 Isdpjy H I S Uofx An Hsif

Condition: new, useable dimensions (bogie hearth): depth: 4.000 mm width: 3.500 mm height: 1.500 mm max. temperature: 1200 °C working temperature: 980 °C heating power: 810 kW divided between 6 burners à 135 kW drive systems bogie hearth: 2 x 0,75 kW Ijdpfxsd Nf Sme An Heif number of control groups: 3 PLC: Siemens S7 Please note that we make the furnaces according to customer requirements (e.g., dimensions, temperature, type of heating).

Condition: used, Year of construction: 2013, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,300 mm, overall weight: 40,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 9,000 h, spindle motor power: 37,000 W, Equipment: chip conveyor, rotational speed infinitely variable, 5-axle MATEC 40 HV semi-trailer in good condition. Iiodpfozdi Uvjx An Hjf

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1539000208A, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC 620, rotational speed (max.): 10,000 rpm, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Rapid traverse rate: 25 m/min Table size: 1,200 × 560 mm Motor spindle speed: 10,000 rpm AC main drive power: 13/9 kW at 40/100 % duty cycle Tool positions: 20 Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain TNC 620 Connected load: 17 kVA Rated current: max. 28 A Fuse rating: 35 A Supply voltage: 400 V Supply frequency: 50 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,100 kg EQUIPMENT Electronic handwheel Iedpfxeztb Ime An Hjif Chip conveyor with extended coolant tank Coolant air blast switchover Coolant spray gun Heidenhain TS 649 touch probe

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,818 h, travel distance X-axis: 155 mm, travel distance Y-axis: 25 mm, travel distance Z-axis: 170 mm, controller manufacturer: FANUC, controller model: 32i-TB, number of axes: 8, This 8s Muratec MW 40 was manufactured in 2019. It features a twin-spindle configuration with automatic loading and unloading capabilities. The machine includes 2 C-axes and 2 Y-axes, providing versatile machining options. With a total of 7 turning holders and 6 boring holders, it is designed for efficient part handling. If you are looking to get high-quality turning and milling capabilities, consider the Muratec MW 40 turn-mill centre we have for sale. Contact us for further details. • Configuration: Twin-Spindle CNC Turning Centre • C-Axes: 2 • Y-Axes: 2 • Gantry Loader: Double Gantry Loader Isdpezcwiysfx An Hsif • Spindle Configuration: Twin Spindle • Tool Holders: 7 Turning Holders • Tool Holders: 6 Boring Holders • Condition: Fully Functional • Turning Station • Voltage: 400 V • Frequency: 50 Hz • CE Marking: Yes • Loader Type: Gantry Loader • Automation: Automatic Loading and Unloading System • Part Handling: Automatic • Turning Capability: Yes • Drilling Capability: Yes • Milling Capability: Yes • Tapping Capability: Yes • Coolant Filtration: Basket Filter • Transformer: 16 kVA • Transformer Input Voltage: 400 V • Transformer Output Voltage: 200 V • Hydraulic Chuck Foot Switches: 2 • Tool Monitoring System: Muratec Cutting Monitor • Tool Management System: Tool Counter with Sister Tool Selection • Polar Coordinate Interpolation: G12.1 • Cylindrical Interpolation: G7.1 • Rigid Tapping: Yes • Coolant and Air Through Spindles: Yes • Twin Front Spindles: Yes • Books are included (instruction manual in German) Optional: • Parts Infeed Conveyor • Parts Outfeed Conveyor • Chip Conveyor Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2012, Data: Ibarmia gantry-type machining center (3 axes) XYZ travel: 3050 x 600 x 900 mm Iiedpfjywz H Hsx An Hsf Spindle speed: 12,000 rpm Tool magazine: 60 positions, HSK 63 High-pressure coolant: 60 bar Tool measurement: Renishaw Touch probe: Renishaw Coolant system / band filter Chip conveyor

Condition: used, empty load weight: 6,160 kg, maximum load weight: 33,000 kg, axle configuration: 2 axles, first registration: 12/2003, suspension: steel, load capacity: 26,840 kg, • Volume 22 m³ • Hydraulic door • Drum brakes Iedpfsyruxksx An Hjif • SAF axles • Internal dimensions: 6.85 x 2.20 x 1.50 m

Condition: ready for operation (used), Year of construction: 2012, Professional automatic machine for rinsing glass and plastic bottles using filtered water. Ijdpfxoyxxaye An Heif Manufacturer: WAB s.r.l. (Italy) Model: ADV R00 R1 8-40-110-110 Number of grippers: 40 pcs Output: approx. 8,000 bph Stroke: 110 mm Control: Siemens PLC Year of manufacture: 2012 Technical condition: Used machine, regularly serviced, fully operational at the time production was stopped.

Condition: good (used), functionality: fully functional, Console base, head adjustable by 600 mm Drilling capacity 40 mm 2 speed ranges, stepless 60 – 1600 rpm 3 feeds 0.1 / 0.16 / 0.25 mm/rev Taper MK 4 Throat approx. 330 mm Quill stroke 220 mm Weight estimated at 1 t (Shown here as sample: 1-axis table with 250 mm cross travel, clamping surface 600 x 240 mm) Iijdpfxjzixgle An Hjf

Condition: used, Year of construction: 2024, x-travel 400 mm y-travel 400 mm z-travel 375 mm control Siemens 840D sl Linear Isdpfx Anezvhm Ij Hoif

Condition: repair required (used), Year of construction: 1995, machine/vehicle number: VM40067E, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, overall weight: 6,000 kg, spindle speed (min.): 8,000 rpm, Brand / Manufacturer: HITACHI Model: SEIKI VM 40 II Year: 1995 Taper: BT40 Serial number: VM40067E Control unit: SEICOS MY II DIMENSIONS Table dimensions: 760 x 400 mm. Ijdpfozl S I Uex An Hjif TRAVEL X-axis traverse: 560 mm. Y-axis traverse: 410 mm. Z-axis traverse: 410 mm. SPINDLE Spindle speed: 8,000 rpm. Spindle power: 5.5 / 7.5 kW. WEIGHT AND DIMENSIONS Machine weight: 6,000 Kg. ACCESSORIES 30-station automatic tool changer / ATC Capacity: 30 Tools Nikken 4th axis CNC rotary table (REQUIRES REPAIR) The machine is complete and includes documentation and manuals. The mechanical part is in good condition. The electronics need repair; likely the power supply. (NEEDS TO BE REPAIRED) The machine is complete. It also has documentation and manuals. The mechanical part is good. The electronics need repair. Probably the power supply.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 67025/129, Year of construction: 1986, load capacity: 12,500 kg, lifting height: 5,500 mm, overall weight: 15,000 kg, Completely refurbished just over a year ago. Forklift is in perfect condition. Has not been used much in the past year. Every inspection and test is available. Iijdpfx Aexqpqden Hjf

Condition: good (used), Year of construction: 2005, Hurco VMX 64/40T Year of manufacture: 2005 Control: Ultimax Travel: X-1630 mm, Y-860 mm, Z-760 mm Spindle speed: 10,000 rpm Spindle coolant Tool changer: 40 positions Chip conveyor Iijdpfsy Ia Rlsx An Hjf

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg Iedpswd N S Dofx An Heif

Condition: excellent (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, input voltage: 110 V, laser power: 30 W, working range: 175 mm, laser wavelength: 10,600 nm, input frequency: 50 Hz, Nearly unused Cajo Vega 30W CO2 marking laser (year 2023) High quality and top precision available! Our company is selling a like-new Cajo Vega marking laser due to low usage needs. The device was purchased new in 2023 and has seen very little use, making it virtually as good as new. Iiodpfxsy I Ui Ae An Hof This unit is better equipped than standard: it includes the extended Cajo Studio+ software as well as red-dot preview, which enables fast marking alignment and helps prevent marking errors. Machine type: Laser marking machine Serial number: Model: Cajo Vega CO2 30 W Laser power: 30 W Laser wavelength: 10600 nm Input voltage: 110–115 V Input frequency: 50 Hz Power consumption: 720 W Year of manufacture: 2023 If you have any questions or require further information, please contact us by message. We will respond as soon as possible.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Iedpfx Anozrwyps Hsif Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Iiodpfx Anjy Hl Iys Hof Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) Iiedoxgukbspfx An Hjf The machine can be inspected under power by appointment.

Condition: ready for operation (used), Year of construction: 2004, Make: AXA Type of machine: VHC 2-4000 M/E Year of manufacture: 2004 Control system: Heidenhain TNC 430 Machine's weight: 19.500 kg Tool holder: SK 40 DIN 69871 A spindel speed: 6.000 U/min x-travel: 4.000 mm y-travel: 600 mm z-travel: 800 mm Speed range: 30–6.000 U/min Iedpfx Anszkr S Rj Hoif Spindle lock: SK40 Operating time: 28.060 h Chip removal device: Ja Cooling system: Ja Tailstock: Ja (MK4, manuell) Chuck size: 400 mm (RTA 3-400) Traverse Z-axis: 800 mm Table dimensions: 4.440 × 600 mm Number of tools in the magazine: 36 Clamping assembly: SK40 3D Measuring probe: Ja (Renishaw MP10E) : Nein : Ja (Schwenkkopf ±90° / Teilung 1°)

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min Iodpsum Hufjfx An Hsif * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: used, Year of construction: 2018, 4020 Bystronic Bystar Fiber laser 10KW in splendid condition. Immediately available. More information on request. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Iijdpfx Aezuw Swjn Hsf Working dimensions: 4000 x 2000 mm Cutting hours: 15000 Laser output: 10000W

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 600-797, overall weight: 1,000 kg, filling opening length: 93 mm, filling opening width: 385 mm, roll width: 400 mm, rotational speed (max.): 1,770 rpm, TECHNICAL DETAILS Roller width: 400 mm Rotational speed: 1,770 rpm Infeed opening width: 385 mm Infeed opening length: 93 mm Number of axles: 2 Iisdpfxozuwu Ej An Hsf Number of fixed blades: 18 Screen perforation: 20 mm MACHINE DETAILS Main motor power: 22.2 kW Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,200 x 1,000 mm Unladen weight: 1,000 kg Number of transport packages: 1