Used Knoevenagel Row Drilling Machine for sale (67,107)

Condition: new, Type: Z4A Number of drills/spindles Various head variants are available 4x3 Distance between first and last spindle 2300 mm Adjustable drilling speed Klodpfxehmbkte Agpet Height of the working table 840 mm Table dimensions 600x2350 mm Number of clamps 8 Motor power 6 kW(4x1,5) 400 V Motor r.p.m. 2840 r.p.m Working air pressure 6-8 bar Weight 425 kg Transporting dimensions 2450x960x1550 mm

Condition: used, drilling capacity: 23 mm, Equipment: type plate available, High-speed radial drilling machine – Column drilling machine Donau Machine Tools DR23 Radial Drilling Machine Serial number: 2062-4 Operating voltage: 380 Volt, neutral conductor, 50 Hz, 3-phase Drilling capacity: up to approx. Ø 50 mm Speed range: 58 – 1275 rpm Tapping function, arm reach 920 mm Machine lamp Base plate/table size approx. 1100 x 400 mm Motor power approx. 1.5 kW, without coolant system 2 T-slots at the rear left Weight: approx. 1,200 kg Inspection under power possible by prior appointment. All technical data subject to change/errors excepted. Price on request Sale exclusively to EU countries only. Kledpswybqqjfx Agpot

Condition: good (used), Year of construction: 1990, machine/vehicle number: 3010164, Offer 25462 Technical Data: - Drilling capacity in ST 37 up to 32 mm - Drill spindle mounting with drawbolt thread M 12 / MT 3 - Drill spindle speeds: 120 to 1600 rpm - Drilling unit height adjustable via hand crank - Maximum distance table / drill-milling spindle: 650 mm - Drill spindle stroke with fine feed via handwheel: 130 mm - Drill spindle outreach: 205 mm Kodpfx Ajy Nabajgpjlt - Drill-milling unit rotatable 360° - Coordinate table with 3 T-slots: 730 x 210 mm - Table travel: X-axis 250 mm / Y-axis 200 mm - Drive: 400 V / 1.5 kW - Space requirement: approx. W 1150 x H 1100 x D 1100 mm - Weight: approx. 270 kg

Condition: used, MULTI-SPINDLE DRILLING MACHINE Felder 921 Klodpoy N Syhefx Agpot 21 spindles, left/right rotation of spindles, quick-release spindle holders, spindle spacing 32mm, drilling vertically or horizontally, 2 pneumatic clamps, power supply 380V, The machine is fully functional and ready for operation.

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 Center of spindle to wall or column 293 mm spindle turning speed - stepless 160 - 2250 U/min Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg Klsdeyvvm Sspfx Agpst

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Kljdpfx Agjyvvmxspjt Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Kodpfx Ageyvvmropslt Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: good (used), Automatic drill, drill, plate drill, row drill -Automatic drill: for advertising signs -Spindle mount: 12 mm (can be changed according to customer requirements) -Automatic drilling -Table size: 1200 x 1000 mm -Spindle stroke: 200 mm -Speed: 2800 rpm -Feed: via gear Kedpfjddfhxjx Agpolt -pneumatic workpiece clamping -Pneumatic workpiece ejection -Dimensions: 1360/1520/H2180 mm -Weight: 450 kg

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW Klodpfoibq Itsx Agpst max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Kjdsw Hanhjpfx Agpolt Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: ready for operation (used), Radial Drill, Used Equipment Brand: CSEPEL Model: R.F. 2a Description: Column Diameter: 350 mm Vertical Travel of the Arm: 1200 mm Kedpfx Asw Db Nuegpelt Horizontal Travel of the Drill Head: 1000 mm Vertical Travel of the Spindle: 400 mm Spindle Diameter: 65 mm 12 Spindle Speeds: 47.5 – 2100 RPM 8 Feed Rates: 0.048 – 1.2 m/min Motor Power: 9 HP

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Kljdpfx Aex Dbltsgpjt Manufacturer: Schanbacher Type: S3-50 Year: 2012 Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 991217, total height: 1,600 mm, total width: 2,300 mm, total length: 2,200 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 120 mm, feed length Z-axis: 40 mm, drilling depth: 40 mm, spindle speed (max.): 2,800 rpm, rotational speed (max.): 2,800 rpm, collet bore: 13 mm, power: 15 kW (20.39 HP), drilling capacity: 35 mm, number of spindles: 2, workpiece height (max.): 40 mm, We offer this used COMEC multi-spindle drilling machine FFR 2+2 1200 + CA, year of manufacture 1999. Kjdpjy Idzhjfx Agpelt Brand: COMEC di Bergamasco L. & C. snc Model: FFR 2+2 1200 + CA Type: Milling/Drilling Machine Serial Number: 991217 Year of manufacture: 1999 Additional information: COMEC twin-column drilling machine for wood Machine dimensions: 2200 x 2300 x 1600 mm Power: 15 kW Voltage and frequency: 380V and 50Hz Spindle speed: 2800 RPM Chuck: from 0 to 13 mm Drill diameter: 35 mm Supply: electric and pneumatic Drilling capacity: - Length: 100 to 1500 mm - Width: 15 to 120 mm - Thickness: 15 to 40 mm If you have any questions or need more information, please don't hesitate to send us a message or call us.

Condition: good (used), Knopp Duplex glass drilling machine double-sided. Year of manufacture 2000 In good condition. Kledjq Umcnepfx Agpst With ball roller table, cross laser and infinitely variable speed control. Incl water cooling

Condition: excellent (used), Number of spindles 4 Drilling capacity -25 mm Throat 205 mm Quill stroke 120 mm Spindle speeds 150-2'000 rpm Kodpfxjy Iz Sdj Agpjlt Table size 1400 x 275 mm With tapping device MARCELS MASCHINEN CH

Condition: new, Year of construction: 2022, bore capacity in steel (diameter) 35 mm throat 350 mm bore stroke 180 mm thread dia. M 24 mm feeds 0,1 - 0,2 mm/U spindle turning speed range 100 - 1450 U/min spindle taper MT 4 table surface area 560 x 385 mm Distance spindle/table max. 780 mm distance spindle/base plate 1320 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, Kedpfx Agjy H Nvbjpolt • left-/right rotation of spindle, • adjustable chip protection

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Kljdpfxjyyxkho Agpet

Condition: ready for operation (used), functionality: fully functional, drilling capacity: 22 mm, throat depth: 370 mm, table length: 1,800 mm, drilling depth: 120 mm, rotational speed (max.): 3,600 rpm, TECHNICAL DETAILS Drilling depth: 120 mm Drilling capacity: 22 mm Throat depth: 370 mm Number of drilling units: 4 Power: 4.4 kW Ksdpfx Agjy Hg E Tepelt Table type: Fixed table Table dimensions: 1,800 x 500 mm Main spindle power: 1.0 kW Spindle speed range: 345 - 3,600 rpm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,900 x 1,000 x 1,900 mm Net weight: 1,500 kg Transport packages: 1 EQUIPMENT Documentation Conventional control

Condition: new, Year of construction: 2026, functionality: fully functional, Nanxing ND712D is a state-of-the-art 6-sided CNC drilling machine, equipped with two independent workstations, allowing for simultaneous processing of two panels and doubling productivity. This machine is designed for furniture manufacturers seeking speed, precision, and reliability within a compact footprint. Key Features - 2 independent workstations (1200 + 650 mm), each with a dedicated computer and processing units. - Optimized drilling blocks: up to 19 vertical drills + horizontal drills on the X and Y axes. - 4 main spindles (2 upper, 2 lower) with power up to 5.5 kW and 18,000 rpm. - Air-cushion tables for scratch-free panel handling. - Automatic dimension detector with alarm and panel compensation feature. - Servo-driven clamps and automatic side alignment system for maximum accuracy. - Advanced software + SYNTEC CNC control with user-friendly interface, supporting MPR, DXF, BPP, PDX, and XML file formats. - Barcode scanner for integration into automated production workflows. - Enhanced safety: side sensors, emergency stop, cable protection. Technical Specifications - Panel dimensions: Length 200–3000 mm / Width 30–650 mm / Thickness 10–60 mm - Max. traverse speed: X/U – 135 m/min, Y – 75 m/min, Z – 30 m/min - Total installed power: 43.8 kW - Weight: 6,300 kg - Machine dimensions: 6,620 × 4,620 × 2,378 mm - Power supply: 380V / 50Hz / 3 phase Kedoxcwmqspfx Agpelt Application Areas - Medium and large-scale furniture manufacturing - Panel processing for kitchen cabinets, wardrobes, bathroom and office furniture - Complete 6-sided drilling + light milling in a single setup User Benefits - High productivity: processes two panels simultaneously - Error reduction: automatic dimension detection and precise positioning - Smart line integration: barcode scanner, compatible with ERP/CAD-CAM software - Optimal cost / maximum efficiency: one machine equals two drilling solutions

Condition: used, Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter) 80 mm Arm reach 2000 mm Workpiece height - approx. 1300 mm Boring diameter in steel 100 mm Boring diameter in cast iron 115 mm Thread cutting in ST 60 M 68 mm Spindle speeds 16 - 1250 rpm Number of spindle speeds 32 Spindle stroke 550 mm Kjdjy H Dauopfx Agpjlt Number of feeds 18 Feed range 0.06 - 3.0 mm/rev Distance spindle/baseplate 480 to 1800 mm Column diameter 500 mm Spindle motor 11 kW Lifting motor 4 kW Total power requirement 15 kW Machine weight approx. 8,500 kg Footprint 3200 x 1250 x 3600 mm with work table 1500 x 1000 x 500 mm

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Kjdsy Ih Tzspfx Agpolt Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 Kledjw Naabjpfx Agpst this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Kedpfx Ajy Nltnjgpjlt Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Y axis working area: 1400 mm Ksdsy Nx Ufopfx Agpjlt Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 21 Total number of tool changer positions: 77

Condition: used, Format: 0x0 Ksdpfx Agoy Dudxspelt Equipment: 2 spindles