Used Leakage Tester for sale (267)

Condition: used, Year of construction: 1972, functionality: fully functional, total length: 2,000 mm, total height: 1,250 mm, total width: 1,000 mm, saw blade length: 650 mm, cutting range round steel at 90°: 400 mm, input voltage: 400 V, type of input current: three-phase, cutting diameter: 400 mm, Offered from an estate: Kasto EBS 400 U hacksaw Very robust, cast construction Industrial quality Made in Germany Year of manufacture: 1972 Two speeds adjustable electrically Additional cutting speeds can be set via pulley adjustment. With rapid traverse. Maximum sawing diameter approx. 400 mm Documentation available. Dcjdpfsyy R Uxex Aipjh 400V three-phase connection One 650 mm saw blade included Cylinder was resealed some time ago; no oil leakage! Fresh oil change Scraper marks on the guides still visible! With fully functional coolant system. This saw cuts 120 mm round steel in only 4 minutes Sold as seen, for hobbyists/repair. Private sale: no warranty or guarantee of any kind. All information given without liability. Returns excluded.

Condition: as good as new (ex-display), Year of construction: 2011, Used storage tank made of steel according to EN 12285-1 (with test certificate) double-walled, for underground storage of fuel oil and diesel fuels, 1 dome (alternatively 2 domes possible). Capacity: 100,000 liters Dcjdpfei Enxdsx Aipsh diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18,800 kg In addition, we can also equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detector - Dome shaft with shaft cover in walkable or traversable drive-over design - Partition walls (as multi-chamber tank) - Interior coatings (e.g. 2-component epoxy resin), partial or full linings - Content and level measuring devices as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Dispensers for diesel, biodiesel and gasoline - with complete tank data acquisition on request - External tank insulation with PU foam Tank is cleaned inside and outside coating is overhauled and checked with 14 kV. A cost-effective delivery with our own truck is possible. Just tell us the delivery place, you will get the exact freight cost immediately. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: Dedpfxshvmiwo Aipjch - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Capacity: 50.000 liters diameter: 2.500 mm length: approx. 10.800 mm Weight: approx. 8.800 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination suction pipe (1 1/2" or 2") - 1 vent pipe 2" with vent cap Tank is factory equipped with the above fittings and is cleaned inside. Capacity: 100.000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18.800 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Dcodpfx Aioguzhcspsh Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Capacity: 80.000 liters diameter: 2.900 mm length: approx. 12.780 mm Weight: approx. 15.750 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 Dsdpfxehvidgo Aipsch 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min Dcodpfxeqvcnno Aipoh total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Year of construction: 2013, operating hours: 390 h, condition: good (used), Vacuum chamber with control and pump unit. Dsdpfx Aiobr Dc Aspoch Diameter inside: 1000 mm Length inside: 1600mm Vacuum pump: 1000m³/h Checked leakage rate! Different vacuum chambers available as well as different constellations with pumps possible. For further information please send us an inquiry!

Condition: used, Helium leak detector Manufacturer: Pfeiffer Type: HLT 260 Condition: Tested and ready for use Dsdpfjc S D A Tex Aipoch Connection: 230V Delivery time: ex stock (u.ue.V.)

Condition: good (used), Year of construction: 2013, Helium leak detector Manufacturer: Leybold Type: Phoenix L300i Condition: very good! Connection: 230V Delivery time: ex stock (u.ü.V.) Dcjdpfx Aot Uru Tsipjh

Condition: like new (used), Year of construction: 2022, Helium leak detector Manufacturer: Leybold Dedpet Urlrsfx Aipech Type: Phoenix Quadro EU Condition: As good as new Ready for use from 2022 unused Connection: 230V Delivery time: ex stock (u.ü.V.)

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2 (with test certificate), double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Capacity: 50.000 liters diameter: 2.500 mm length: approx. 10.800 mm Weight: approx. 8.800 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! Dsdpfx Aiohvmitspjch We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst

Condition: used, functionality: fully functional, A used Holdefleiss bottle filling and capping machine, type 12/3. The machine has been set up for 0.5l Euro and 0.33l long-neck bottles, including HDE. The machine is supplied without a pre-evacuation system and features long-tube filling valves. The filling valves will be newly resealed. Both a leakage test and a pressure test will be performed. Dcsdpfx Aoyycudsipjh

Condition: used, mileage: 177,442 km, power: 130 kW (176.75 HP), first registration: 11/2010, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: orange, gearing type: semi-automatic, total width: 2,360 mm, total height: 3,230 mm, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, Unimog tractor unit with front and rear mowing equipment U400 - 405/12 * Unimog U400 * First registration: 11/2010 * Hours not readable on the meter * Mileage: 175,442 km according to odometer reading * 4249 cc engine with 130 kW / 177 hp * Semi-automatic transmission * Driver's cab with 3 seats * Tire size: 385/65 R 22.5, tread depth 7-13 mm * Wheelbase: 3080 mm * Gross weight: 12,500 kg, unladen weight: 6,250 kg, axle load: front 6,700 kg, rear 7,000 kg * ABS, radio, differential lock, power steering, chocks * Dimensions (L x W x H): 5100 x 2360 x 3230 mm Dsdpfoyxiuuex Aipoch * Dimensions with equipment (L x W x H): 8350 x 2520 x 3750 mm * Front mower: Mulag RMK 300, year 2009, 2442 hours, 530 kg * Rear mower: Mulag MHU800, year 2004, 2750 kg * Mulching head: Mulag RMK 1200, year 2009, 170 kg * 40 mm DIN towing hitch * Front and rear PTO shafts * Front and rear hydraulics * Oil cooler leakage Further details and additional photos available upon request. This description does not constitute a binding offer and may contain errors; no guarantee is given for all specifications. Visit our homepage at

Condition: used, Year of construction: 1994, machine/vehicle number: 883050, functionality: fully functional, Dimensions: 257 cm width x 220 cm depth x 242 cm height Weight: 8,320 kg Max. pressing force: 850 kN (85 tons) Max. bending length: 2,050 mm Distance between uprights: 1,750 mm X-axis travel: 600 mm Stroke height: 220 mm Controlled axes: X, Y, R, I Control system: Delem Equipment: 6 backgauges Condition: Technically sound, except for oil leakage Crowning: wedge-type crowning Djdpfoylh N Nsx Aipech The machine is operational and in good overall condition.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 35.09.021.24, functionality: fully functional, operating hours: 285 h, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 8,000 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 9,000 m³/h, intake manifold diameter: 350 mm, filter area: 16 m², noise level: 76 dB, actuation type: electric, total height: 2,260 mm, total length: 2,275 mm, total width: 1,140 mm, overall weight: 350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Dear Sir or Madam, Due to an upcoming company takeover and the expansion of our joinery, we are selling our Felder extraction system, which is only 1.5 years old. The machine is in like-new condition and has all inspection and testing documentation available. Should you have any further questions, we are at your disposal. Information: Commercial and industrial woodworkers benefit from Felder clean air extraction units, tested for wood dust, available in various price and performance categories. Mobile and space-saving, the RL 125, RL 140, RL 160, RL 200, RL 250, RL 300, and RL 350 models offer flexibility and top performance in minimum space. All models achieve a residual dust content of less than 0.1 mg/m³, meeting dust class H3 requirements. Unlike conventional extraction systems, Felder positions the fan on the clean air side, generating a negative pressure throughout the system and preventing dust leakage in case of leaks. Performance and speed adjustment via negative pressure measurement - Chip containers The longitudinally mounted chip containers ensure optimal filling of the chip bags. The optimized fastening system allows for quick bag changes. - Cartridge filters Greater filter area with similar space requirements Reduced filter load Maximized filter service life - JET cleaning system Continuous jet pulses of compressed air clean the filter automatically, ensuring consistently optimal extraction performance. - Machine connections High standard: water fire extinguisher and pneumatic filter cleaning. Optional: powder fire extinguisher. Further information can be found in the attached diagrams. This machine can be inspected and tested on site. ! This item is being sold used by our company. Exchange, return, and warranty are excluded! Djdpfx Aoyu Hw Doipoch

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: VBM, Manometer 0-10 bar, unused, original packaging Dcjdpfeyfmr Asx Aipsh -Type: 1/BM 20 M 20x1.5 260 Ø -Item No.: 13301-B44-01 -Number: 9x pressure gauges available -Price: per piece -Cardboard dimensions: 310/310/H70 mm -Weight: 4.6 kg/piece

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Dcodpjrq D Nisfx Aipoh The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: new, Year of construction: 2025, AHB-20A screw compressor special for laser machine double use 8 till 16 bar G3/4 connection 380 volt 3 phase 50Hz air delivery 1,2 m3/min Tank 500 l High Efficiency Refrigerated Air-dryer include High Efficiency Precision Filters include Air supply without oil and water two stge screw type INCLUDE IN THE PRICE: 1 airfilter ( have to change after 3000 hours ) 1 oil filters ( 1 change after 500 hour second after 3000 hours ) 1 separator ( change after 3000 hours ) Advantanges High Pressure Screw Air Compressor SPECIAL FOR LASER MACHINES Integrated Design Air compressor, air dryer, air tank and line filters integration. Avoid the trouble to connect the pipes, can use it after power on. Air Supply Without Oil and Water The compressed air contains oily water mist and oil, and high-pressure spraying on the protective mirror will seriously affect the transmission of the laser beam, disperse the focus, cause the product to be cut through, and produce waste. Intelligent Monitoring ( option ) Smart housekeeper remote monitoring, 24-hour online monitoring, no need for special management to open the phone to quickly obtain machine operation information, When the machine encounters a malfunction or needs maintenance, the system will automatically send an early warning message. High Quality Spare Parts High-End Air End The double screws adopts the latest line design, high-precision processing, reduces the leakage of compressed air, reduces power consumption, and saves money for customers. Imported Electronic Accessories Imported electronic components, high protection and safety level, to ensure the stable operation of the equipment, and the electrical part is enlarged by 30-50%. High Efficiency Precision Filter Dcjdpfx Aijm E Im Topjh Using high-precision and high-pressure-resistant filters, multiple filtrations to ensure that the gas supply is oil-free and water-tree, ensuring production. Large Capacity Air Tank Large capacity, more energy-saving and electricity-saving, thicker material, buffering, cooling, water removal, and stable air pressure. FOR MORE INFORMATION PLS TAKE CONTACT WITH US. J.C. Helthuis Coevorden Netherlands

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 226735, type of input current: AC, input voltage: 230 V, Equipment: type plate available, Qualification, commissioning and troubleshooting – intuitive, flexible, fast High data transfer rates of up to 10 Gbit/s Ethernet and new Power-over-Ethernet applications up to 90 W present entirely new challenges for structured cabling. The NetXpert XG2 offers comprehensive active and passive network testing up to 10 Gbit/s for the qualification, commissioning, and troubleshooting of copper and fiber optic cabling. Featuring the largest touch display in its device class, the NetXpert XG2 guarantees user-friendly operation and a clear presentation of results. At the same time, the NetXpert XG2 ensures maximum reliability of results thanks to the unique combination of up to four different testing methods for analyzing a data link. Flexible, scalable model range – upgradable from 1 to 10 Gbit/s The NetXpert XG2 and XG2-PLUS qualify twisted pair cabling from 1 to 10 Gbit/s. With their unique combination of four measurement methods, these devices verify whether your cabling can support interference-free Ethernet transmission up to 10 Gbit/s. The NetXpert XG2 is available in its base version from 1 Gbit/s and can be upgraded to 10 Gbit/s. The NetXpert XG2-PLUS comes fully equipped to also qualify fiber optic cabling up to 10 Gbit/s. Dodpoygwayofx Aipoch SPECIFICATIONS – ALL VERSIONS Copper Interface 1 x Cat 6A RJ45, replaceable Fiber Interface 2 x SFP slot, 1 - 10 Gbit/s; (SFP modules to be ordered separately!) Length measurement technology TDR (Time Domain Reflectometry) and capacitive Cabling test and ID Up to 305 m Split-pair detection: 1 m to 305 m Length measurement: 0 to 457 m, ± (5%+30 cm) Distance to fault (short circuit): 0 to 200 m ± (5% + 1 m) Compatible with 8 pass-through test and up to 24 ID remote units (RJ45) (ID remote units only) Power over Ethernet (PoE) Tests according to IEEE 802.3af PoE (Type 1, max 15.4 W), IEEE 802.3at PoE+ (Type 2, 30 W) and 802.3bt PoE++ (Type 4, 90 W) Max. voltage Maximum voltage that can be applied to any two test inputs without damaging the tester: RJ-45: 60 VDC or 50 VAC Memory capacity Stores an unlimited number of cable or network tests per project with custom names Tone generator Tone frequencies: 730 Hz and 11.440 Hz Languages English, German, French, Spanish, Italian Battery Li-Ion, 7.2 VDC, 6.2 Ah / up to 4 hours (typical) External power supply 12VDC Permissible temperatures Operation: -10° to 60 °C Storage: -30° to 70 °C Permissible humidity 10% to 90%, non-condensing Housing Plastic injection-molded Display 7" TFT-LCD color display with capacitive touchscreen, 1024 x 600 resolution (WSVGA) Dimensions 245 x 177 x 73 mm (main unit) 130 x 177 x 55 mm (active remote) Weight with batteries 1.2 kg (main unit) 0.6 kg (active remote)

Condition: used, Year of construction: 2008, JW FROEHLICH MPS 200 - Leak tester LEAK TESTER Dedeypwgrspfx Aipech Condition: Used functional

Year of construction: 2026, condition: new, Model: X5600 Application: Micro-focus X-ray inspection of electronic components and assemblies such as BGA, CSP, SMT, wafer, SOP, QFN, sensors, and more. X-ray Source Specification Value Type Sealed micro-focus X-ray tube Voltage 40–90 kV Current 10–200 µA Max. output power 8 W Microfocus spot size 15 µm Djdpfx Aisymfmzjpoch X-ray leakage ≤ 0.5–≤ 1 μSv/h (safety standard) Detector & Image Quality Specification Value Detector type TFT industrial dynamic flat panel detector Resolution pixel matrix 768 × 768 (sometimes 1.3 MP depending on configuration) Field of View 65 × 65 mm to ~130 × 130 mm Image resolution ~5.8 Lp/mm Frame rate ~20–40 fps A/D conversion 16 bit 🛠️ Mechanical & System Specifications Property Value Machine dimensions approx. L850 × W1000 × H1700 mm Max. sample size ~280 × 320 mm Net weight approx. 750 kg Power supply 220 V 10 A / 110 V 15 A 50–60 Hz Operating system Industrial PC (Windows 7/10 64-bit) Inspection mode CNC automatic multi-point inspection Tilt function ± 30° tilt & 360° rotation for multi-angle inspection Software & Features ✔ Automatic defect recognition: Y/N, crack, broken wire, offset, bridging, etc. ✔ CNC-controlled automatic inspection over multiple points. ✔ Infrared automatic navigation and positioning. ✔ Inspection report generation. ✔ Multi-angle & 360° rotation inspection for enhanced defect detection.

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Dcodpfx Ajx N Rvnoipeh

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Mercedes Benz Arocs 5 3546 8x4 EURO6 GSR with Schwing Concrete Pump S 43 SX III 5-Section INCLUDING Easy-Flex Support System First registration: unregistered Mileage: 500 km Colour: Arctic White Technical Data: • Power: 335 kW (455 PS) • Front and Rear Tires: 315/80R22.5 • Total weight: 35,000 kg • Emission Class: Euro 6e • Transmission: Automatic, Mercedes Powershift 3 • Condition: New vehicle Chassis Equipment: • Double disc clutch • M cab Classic-Space, 2.30m, 320mm tunnel • Comfort cab suspension • 7.5 t straight front axle • Rear axle: 13.4 t planetary, ring gear 233 • Gearbox oil cooling • 290L aluminium tank + 25L AdBlue • Front and rear disc brakes • Sun visor • Air conditioning • ABS + ASR • Driver’s comfort suspension seat, velour leather • Fog lamps, LED daytime running lights • Multimedia cockpit, interactive with navigation and Bluetooth • Cruise control • GSR (General Safety Regulation) equipment as follows: - Lane Keeping Assist - Attention Assist - Traffic Sign Assist - Active Brake Assist 6 - Active Sideguard Assist 2 - Frontguard Assist - Preparation for alcohol tester with immobiliser - Reversing camera Superstructure Equipment: • Schwing S 43 SX III, 43 m, 5-section concrete pump • Number of articulations: 5 • Boom pipe: Super 2000 DN 125 • Max. vertical reach: 42.30 m • Horizontal reach from slewing center: 37.55 m • Placing boom: 43RZ • Pump type: P2525-120/85 • Max. theoretical output: 162 m³/h • VECTOR control system • B-Rock slide valve system • Electric agitator on hopper screen • Swivel range: 2x 365° • Support system: Easy-Flex, CE • Hopper fill height: approx. 1350 mm • Max. hydraulic drive: 636 l/min • Pump cylinder diameter: 250 mm • Water tank: 610 l, roller water pump • Schwing Control 30 remote control • Oil cooler • MPS control system Dsdpei Tkbdsfx Aipjch Non-binding offer from location Cologne. Subject to prior sale and errors. Sale to trade customers only. Non-binding offer EXW Cologne. Subject to prior sale and errors.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Holp CutWheel / CW.149.140 / incl. MS10 mounting / HARDOX / NEW / in stock & immediately available Price: €18,590.00 net / €22,122.10 gross - Suitable for excavators: 12 – 17 t - Own weight approx.: 670 kg - Cutting material diameter (cutting direction): 3 – 50 mm - Cutting material diameter (sawing direction): 50 – 200 mm - Cutting width: 1,360 mm - Cutting height above ground: 150 mm - Oil flow: 100 – 110 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 80 – 100 rpm Advantages of the Holp CutWheel: - Clean cutting of all types of wood due to adjustable counter blade - Significantly more economical operation as less manpower and fewer machines are required, while maintaining a high level of operational safety - 3-in-1 functionality: cutting (3 mm to 50 mm), sawing (50 mm to 200 mm), and piling of cut material - Work at heights up to 8.5 meters with a 10-tonne excavator and up to 10 meters with a 15-tonne excavator - The cutting wheel operates in two directions and easily handles diameters from 3 mm to 20 cm - High robustness (cutting wheel made from fine-grain steel) - Cutting and sawing direction as well as diameter are adjustable from the cab without interrupting the work process, which also ensures greater safety - Significant savings as the CutWheel on the excavator replaces a platform lift – thus, the CutWheel replaces various machines and manual labor - The robust design also allows for pushing material lying on the ground, similar to a broom - As the CutWheel does not saw but pinches the wood in both cutting directions, wood fibers are not torn out as with a conventional saw blade. This results in a smooth cutting surface, preventing fungal infestation - Three hydraulic connections are required: Double-acting work line for cutting/sawing blades 1 x leakage oil We have many other Holp products available for immediate delivery in our warehouse! Mr. Herden (phone) will be pleased to assist you. Upon request, we are happy to provide you with a financing offer. We are an official Holp sales and service partner. Dcodpfxjynrhze Aipsh We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Subject to errors and prior sale! New: Yes Empty weight: 670 kg Part suitable for: Forestry applications Please contact...

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, operating pressure: 280 bar, type of input current: AC, tank capacity: 360 l, input voltage: 400 V, space requirement height: 1,600 mm, space requirement length: 1,400 mm, space requirement width: 1,400 mm, pump capacity: 68 l/min, rotational speed (max.): 1,480 rpm, power: 11 kW (14.96 HP), Hydraulic Power Unit Manufacturer: Rexroth Mecman AB Model: A10V 0 45 DFR /31R-PSC62K01 Year of manufacture: 1998 Condition: very good (used) Functionality: fully operational Pump Manufacturer: Rexroth Pump Type: A10V 0 45 DFR /31R-PSC62K01 Max Pump Speed: 2600 rpm Pressure Regulator: with hydraulic flow control X-T open Direction of rotation: right (viewed from drive shaft) Flow Rate: 2 x 68 liters/min at 1450 rpm Operating Pressure: max. 280 bar Oil: ISO VG 46 Drive Power: 2 x 11 kW Electric Motor Speed: 1450 rpm Input Voltage/Frequency: 400 V / 50 Hz Tank Capacity: 360 liters Accumulator Capacity: 32 liters The unit is equipped with the following components: Djdpfx Aiex Szxljpjch • 32-liter accumulator • Double filter unit with pump • Digital pressure transmitter • Dryer • Solenoid valves • Oil/water heat exchanger • Drip tray • Terminal box Dimensions (L/W/H): 1,400 mm / 1,400 mm / 1,600 mm Weight: 850 kg Variable displacement axial piston pump for hydrostatic drives in open circuit. The flow rate is proportional to the drive speed and the displacement volume is adjustable. The swash plate allows infinitely variable adjustment of flow rate. 2 leakage oil connections Good suction characteristics Low noise level Long service life Favorable power-to-weight ratio Comprehensive regulator options Short response time The through-drive is designed for mounting gear pumps or axial piston pumps of the same nominal size, i.e. 100% through-drive capability.