Used Mair Multihead Tube Cutting Machine Tra3000/7/7/Car ... for sale (89,373)

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck, quick-change thread chuck -Manufacturer: Holex, Thread cutting chuck, quick-change thread chuck, 7 pieces -Type: 335620-10 -Size: M5 to M20, see photos -Submission/Price: complete Itjdpfszcu Srjx Anwjh -Transport dimensions: 330/120/H70 mm -Weight: 4.4 kg

Year of construction: 2005, condition: used, Tube bending machine. Ijdpfx Anezdb H Eoweth

Condition: good (used), Year of construction: 2021, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2021 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Iodpfozcng Aox Anwoth Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Itjdpfozcngcjx Anwjh Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace   Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Itsdst R Tgijpfx Anweh Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Object of sale: 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Isdsqmm D Sopfx Anweth Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: new, Year of construction: 2025, laser power: 6,000 W, working range: 6,000 mm, We, Airtech Stickstoff GmbH, have been partners with Bodor Laser for 8 years. We offer customers cost-effective, up-to-date laser cutting machines that are economically viable. Comprehensive service as well as system setup with our own service team. German-language training is also part of our services. Top quality at top prices. Iedpfxjfbg E Tj Anwjth - Operable with or without loading system; here you have two options: fully automatic with bundle storage or a semi-automatic that can transport several rods of long material. - Simple programming. - 3 machine types with tube diameters up to 120 mm-350 mm available - Laser power up to 12 kW.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, laser power: 8,000 W, Manufacturer: TRUMPF Type: TruLaser 3060 fiber (L66) Year of manufacture: 2018 Working area 6000 x 2500 x 115 mm Laser power: 8000 watts Control: Siemens Sinumerik 840D SL Standard equipment Machine ⦁ Working area 6000 x 2500 mm ⦁ Closed machine frame ⦁ Integrated cabinet with roller shutter ⦁ Automatic pallet changer in longitudinal direction ⦁ Gantry drive combined with linear direct drives ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Cooling unit ⦁ Integrated control cabinets ⦁ Longitudinal conveyor belt ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spraying system ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning Extended features: ⦁ External TruDisk 8001 solid-state laser with 1 LLK output (includes BrightLine fiber and Fusion Cut Performance Package) ⦁ DetectLine ⦁ Drop & Cut ⦁ Advanced Condition Guide sensors ⦁ Cameras 1+2 ⦁ Cross conveyor ⦁ Wireless Operation Point ⦁ Dust protection for device plate ⦁ High-speed cutting package ⦁ Copper cutting package - O2 and N2 cutting data ⦁ Brass cutting package - N2 cutting data ⦁ Smart Collision Prevention (only in conjunction with TruTops Laser or TruTops Boost) Iodpjwl I Tvsfx Anwjth

Condition: used, Hagen & Goebel HC 22 E / Thread cutting machine -Speed range 56 - 355 rpm -Thread cutting capacity: Max. M22 in steel / M27 in cast iron -Table dimensions 600x500mm -Year of manufacture 1988 Itsdpfx Anezda Dpewjh Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 900 kg Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, cutting width (max.): 1,370 mm, BM5164 P137 EMC MON - refurbished EM electronic Monitor display LMS (Length Measuring System) => NEW swivel and tilt saddle Fixomat 6-channel light guards two hand safety cutting back table guarding optical cutting line indication air table Ijdpfey Spl Tsx Anwoth slot cover at back table side tables (2) adjustable hydraulic pressing 2 knives, documentation, el. diagrams, tooling Electric: 380V / A 12.3 / 50 Hz / 3 cycles ----- Additional periphery available at extra costs - separate standing paper-lift - Unloader-Stacker TR130-ER-4 =>BM5134 - Paper Waste Disposal System =>BM5018 - Paper Jogger RA-B-5 =>BM5149

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5150 P137 CUTTING LINE - refurbished => Package Price €26.000 1) Polar 137EMC-MON AT Guillotine 1995 -> single item price 18.000 € 2) Transomat TR1ER145-3 Downstacker/Palletiser -> single item price 10,000 € 3) Jogger Polar RA-B-5 with Air Removal -> single item price 3.000 € 4) Paper Lift -> single item price 1.500 € Contact us for further info and for personal price negotiations Ijdpfx Aov Ic H Djnwsth

Condition: reconditioned (used), Year of construction: 2007, The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor. Isdsh S Drkspfx Anweth

Condition: ready for operation (used), KRAUSE cutting machine, cutting width 80 cm, with 3-4 spare blades & cutting strips. In working order and functional. Itodpezc Rtxjfx Anwoh Minor adjustments may be necessary.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, laser wavelength: 1,063 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, pipe diameter (max.): 550 mm, pipe length (max.): 120,000 mm, table length: 120,000 mm, working length: 120,000 mm, The machine is located in Espelkamp and is available immediately. It is manufactured and designed by one of the best manufacturers of tube laser systems. The diameter of the materials that can be processed is 550 mm, or it can handle I-beams, angle iron, rectangular or square tubes, and other materials with an edge length of 550 mm. The system operates with extreme precision and speed. With it, entire steel halls can be cut and beveled with the corresponding 45-degree head in a very short time. This turns every steel structure into a kind of Lego set. No more manual cutting, measuring, and nesting. The accompanying software ensures exact and efficient nesting of the components, minimizing material waste. Itjdpfezcqm Sox Anweh The price includes installation, training, and software.

Condition: like new (used), functionality: fully functional, Equipment: safety light barrier, User-friendly cutting activation via the patented two-stage operating elements EASYCUT. Particularly safe thanks to SCS – Safety Cutting System: IR safety light barrier on the front table and safety cover on the rear table; main switch and safety lock; two-hand cutting activation; 24-volt control; patented safety drive; automatic blade and pressure bar return from any position; disc brake for immediate blade stop; easy blade and cutting strip replacement; blade replacement device with a covered blade edge; blade depth adjustment from the outside. Electrically operated back gauge with touchpad, multilingual operator guidance, and digital dimension display. Dimension indication in cm / inch (display accuracy 1/10 mm). 99 programs with 99 program steps each (up to 15 chain measurements can be stored as one program step). Automatic program sequence during cutting. Direct dimension input via the numeric keypad. Integrated calculator (four basic arithmetic operations). Front table lighting with LEDs. Optical cutting guide with bright LEDs. Machine self-diagnosis with error display on the display. Electromechanical blade and pressure bar drive. Precision back gauge spindle. Back gauge rack with fine pitch and plastic sliders. Two side guides each on the front and rear tables. High-quality blade made of high-quality blade steel. All-steel blade carrier and adjustable blade guides. Stable all-metal construction. Standard equipment includes a base frame, a paper tray, and a practical, removable tool holder on the rear table. Collection possible, shipping available for an extra charge. Itedpezc Icqjfx Anwoh

Condition: excellent (used), functionality: fully functional, CUTTING , TRIMMING SAW machine for solid wood model MZ PROJECT LC 4000 automatic machine second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. maximum cutting length: mm.4000 motor power: Hp 15 total weight: kg. 3.000 volts: 380/50 Iedpfjzdqxcex Anweth

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, laser type: fiber laser, laser source manufacturer: IPG, pipe diameter (max.): 120 mm, pipe length (max.): 6,500 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, For sale: BLM GROUP LT5 tube laser cutting machine. The machine is fully operational. Laser is equipped with tube bundle loader und part collecting bench. Technical specifications: • Model: LT5 • Laser type: Fiber • Laser source: IPG YLR-1000-MM-WC Machine: • Fully operational in production • Integrated loading and unloading system • Test cuts possible during operation • High cutting quality and precision • Regularly maintained and used Itsdpfx Aozd Sccjnwoh • Ready for immediate operation Additional photos and videos of the machine in operation can be provided upon request, as well as the possibility to inspect the machine during operation on site.

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Itsdpfjn Sm Ddjx Anwjh Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Year of construction: 2017, condition: ready for operation (used), A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible. Itodpfszc Rc Tox Anwsh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 38,762 h, machine/vehicle number: A1240A0214, laser power: 4,000 W, sheet thickness (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Sheet thickness (max.): 15 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 10 mm Sheet thickness aluminum (max.): 15 mm Table length: 4,000 mm Iodpfx Anjzdp Agewsth Table width: 2,000 mm MACHINE DETAILS Laser type: CO2 laser Laser source: TruFlow 4000 Laser power: 4,000 W Power: 77 kW Dimensions & Weight Dimensions: see dimensions in images Total weight: 16,000 kg Type of cooling: Water Operating hours Operating hours: 78,203 h Laser hours: 38,762 h EQUIPMENT Cooling unit

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 78,203 h, control type: CNC control, controller manufacturer: Trumpf, laser type: CO₂ laser, laser hours: 38,762 h, laser power: 4,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 15 mm, table length: 4,000 mm, table width: 2,000 mm, working width: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, power: 77 kW (104.69 HP), type of cooling: water, overall weight: 16,000 kg, year of last overhaul: 2025, Equipment: cooling unit, We offer this Trumpf Laser TruLaser 3040 (L32) laser cutting machine, model TruLaser 3040, in very good condition, year of manufacture 2012. Trumpf Laser TruLaser 3040 (L32), CO2 Laser Year of manufacture: 2012, used by the first and sole owner from new Cutting unit power: 4kW Table dimensions: 2x4 [m] X-axis: 4000 mm Y-axis: 2000 mm Z-axis: 115 mm Maximum sheet thickness: - Mild steel: 15 mm - Aluminium: 15 mm - Stainless steel: 10 mm Weight: 16,000 kg Rated power: 77kW Closed-circuit cooling system Good condition: optics and resonator system overhauled (2025) and conveyor belt replaced (2026), machine serviced under Classic contract (every 6 months) by authorized Trumpf service Operating hours: laser beam - 38,762 h, machine - 78,203 h CNC control Machine number: A1240A0214 Location: Inowrocław, Poland Price without VAT Iodpfoy Rxnuex Anwsth For any questions or if you need more information, please send a message or contact us by phone. Tel. +48 722 151 062

Condition: new, functionality: fully functional, Year of construction: 2022, Laser Welder – IPG Photonics Model: YLR-1500-WC Serial Number: PLMP32200563 Power Supply: 200–240 VAC, 1-phase, 50/60 Hz Power Rating: 4500 VA Manufacturing Date: March 2022 2. Control Power Supply / Main Unit – IPG Photonics Model: SYSLC0000058U Serial Number: PD206000 Power Supply: 380–415 VAC Phases: 3P + N + PE Frequency: 50/60 Hz Full Load Current: 25 FLA Overcurrent Protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Circuit Diagram: DOCCHSDMPSXX0225 Manufacturing Date: September 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Manufacturing Date: February 2022 Power Supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent Protection: 30 A / Type 1 Short Circuit Protection: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Iedpfxswyb S Io Anweth Circuit Diagram: P35-001221 Cooling Capacity: 5.5 / 5.9 kW Refrigerant: R407-C, 2.2 kg Maximum Pressure working: 30 bar

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 20221015FX-350ZM, total length: 1,480 mm, total width: 980 mm, total height: 800 mm, overall weight: 500 kg, input voltage: 400 V, type of input current: three-phase, tank capacity: 350 l, We offer a meat cubing machine with a capacity of 300–500 kg/h. The machine is new and has only been used for testing, approximately 1 hour. Cutting range: Itsdozd Sgzopfx Anwsh cube size: from 5 mm to 30 mm also capable of cutting frozen vegetables currently installed blades: 5 mm The machine is in perfect working order and ready for immediate use. Ideal for meat processing plants, catering services, and frozen vegetable production.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC-Steuerung Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction Itsdpeym Nbcjfx Anwoh The machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, total width: 4,500 mm, total length: 4,500 mm, input voltage: 400 V, working width: 2,000 mm, cutting width (max.): 2,000 mm, We offer a camera-assisted CNC cutter for single-layer cutting of textiles and leather. With the integrated image processing system, shapes and designs can optionally be recognized and cut with precision. The machine has low operating hours and is in perfect working condition! Iedpfx Aneyx I Duewsth