Used Otinus Lwh-1500-N Raytools for sale (54,927)

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Podpfx Ajv Ip R Ascfogn

Condition: used, Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This tunnel freezer is currently assembled in our warehouse as you can see in the last photo, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Pgedpjrlk Ikjfx Acfon

Year of construction: 1996, condition: ready for operation (used), Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools. Pgjdjip D Rhopfx Acfon

Year of construction: 2006, condition: ready for operation (used), Output: 1.5t steam/h, max. nominal power: 1093kW/h, gas pressure: 50mbar, fuel: natural gas, including water container, two pumps, safety devices and steam dryer. Pgsdpfx Acef Tdcuefsn

Condition: good (used), electric motor, three-phase motor -Manufacturer: SEW, electric motor unfortunately no type designation -Power output: approx. 1.1 kW -Speed: 1500 rpm -Voltage: 220/380 V -Shaft: Ø 12 x 20 mm -Design: B3/B5 -Dimensions: 300/225/H200 mm -Weight: 19 kg Pgsdpfx Acogx Al Uofsn

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Output: 3x 230 V -Output frequency: 0-120 Hz Podpfx Ajd Drx Eecfsgn -Number: 1x converter available -Price: per piece -Dimensions: 205/250/H190 mm -Weight: 6 kg/piece

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -driven roller conveyor with driven slewing ring -Roll width: 720 mm -Roller conveyor length: 1500 mm Pgjdpoc N N Hqofx Acfjn -Roll diameter: 90 mm -driven: via sprockets -Geared motor: 0.55 kW -Speed: 18.9 m/min -Slewing ring driven: 0.18 kW 31.5 rpm -Dimensions: 1510/900/H695 mm -Weight: 314 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good Pgjdpob Hzggofx Acfjn -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Pedpfxoyfhcij Acfogn

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25-220/220-1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 185 mm Pgedpfxexaau Ee Acfjn spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2420 kg. range L-W-H 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change tool holder with 4 inserts - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, empty load weight: 390 kg, maximum load weight: 1,110 kg, overall weight: 1,500 kg, loading space length: 3,010 mm, loading space width: 1,260 mm, loading space height: 1,180 mm, tire size: 145/80R13, Low loader with cover from the manufacturer ANSSEMS model GTT1500 301x126 VT2. The standard equipment of the Anssems cover trailer with brake includes aluminum side walls, aluminum cover with gallery, overrun flap, internal locks, adjustable lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. Pedpfx Acsq Sviqsfsgn We also offer accessories for Anssems car trailers such as toolboxes, lashing straps, lashing eyes, 100 km/h and anti-theft devices.

Condition: new, empty load weight: 250 kg, maximum load weight: 1,250 kg, overall weight: 1,500 kg, loading space length: 3,010 mm, loading space width: 1,260 mm, loading space height: 300 mm, tire size: 145/80R13, Braked low-loader tandem from the manufacturer ANSSEMS model GTT1500 301x126. Pgedeq Slqtspfx Acfsn The standard equipment of the Anssems box trailer with brake includes aluminum drop sides, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, corrugated grid attachment, side wall attachment, support set, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: used, Year of construction: 2012, x-travel 1520 mm y-travel 700 mm z-travel 800 mm control Siemens 828 D Shop Mill table surface area 1600 x 700 mm rapid traverse 30 m/min table load 1,4 t turning speed range 8000 U/min max. torque on the spindle 300 Nm power capacity - milling spindle 19,5 kW no. of tools in the magazine 30 Stück tool taper SK 40 | | weight of the machine ca. 10,0 t dimensions 4,4 x 2,3 x 2,9 m Equipment: - Coolant through the spindel - Rigid tapping Psdpfx Ajv Nhlzscfjgn - Dialog programming Shop Mill - Chip conveyor - external elect. hand wheel

Condition: ready for operation (used), Year of construction: 2022, total length: 1,800 mm, product height (max.): 400 mm, product width (max.): 120 mm, input voltage: 220 V, SHOWROOM machine, the machine advertised was never delivered and was only used for test purposes. In the pictures, the steam tunnel is switched on for test purposes. alpha-pack SST-1500 steam tunnel Technical details: -even steam distribution through low-pressure steam drum -height-adjustable steam steel pipes -adjustable steam output -can optionally be combined with conveyor belt and sleeve label machine Pgsdjt A Ar Eepfx Acfsn Steam tunnels are particularly suitable for shrinking heat-shrinkable film sleeves on all types of products (glasses, PET bottles, glass bottles, cans and much more). Our steam tunnels are easy to use and the cost-effective alternative to conventional shrink tunnels that are based on electric heaters.

Condition: new, Year of construction: 2025, Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. - Specifications: stainless steel (SS304) version; filling range: 10-1500g; accuracy: +/- 0.3-1%; suitable for: metal cans, glass bottles, plastic jar, paper bags, etc.; container dimensions: diameter 40-130, height 80-220mm with different can feeding screws; max. speed of the machine in neutral: 60 fillings/min; power: 220V, 2.0kW; machine dimensions: L1850xW1366xH2100mm; 260kg. Pedev Nk N Nopfx Acfogn That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 102 mm, total length: 1,300 mm, total width: 3,100 mm, total height: 2,600 mm, overall weight: 2,600 kg, workpiece height (max.): 102 mm, pass-through width: 1,500 mm, One machine for all tasks: removing slag, burrs, and oxide Reliable and clean slag removal with slag hammer brushes The EdgeRacer the Grinder effortlessly removes slag that forms on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted to almost touch the bottom side, allowing the steel pins to knock off the slag. Powerful deburring and defined edge rounding EdgeRacer® the Grinder easily removes stubborn punching burrs and laser beads/splatter. The degree of edge rounding can be set by adjusting the brush feed. Deburring and edge rounding of thin sheet metal and 3D workpieces Pgodpfx Aewzybkjcfsn Deburr thin sheets or parts with cut-outs. The abrasive brushes can be lowered below the transport level so that the entire workpiece edge is processed. The oxide disc allows oxide layers to be removed from both internal and external contours. Maximum working width or double performance – optimally adapted to your needs Depending on the width of the parts to be processed, you can choose between two processing modes. Choose single-row processing to fully utilize the working width, either for wide panels or parallel loading. The brushes automatically change position to optimize tool wear. For narrower workpieces, select double-row processing to achieve double the throughput in just one pass.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200912, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Psdpfxoyap Sho Acfsgn Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: good (used), Year of construction: 2006, MSX-850 control unit Max. turning diameter: 386 mm Max. bar capacity: 52 mm Travel X/Y/Z/B: 260/100/590/624 mm Main spindle max. speed: 6,000 rpm Counter spindle max. speed: 6,000 rpm 12-station tool turret 12 driven stations 5.5 kW, max. speed: 6,000 rpm Automatic parts catcher Pjdpfx Aoq It Rascfjgn Chip conveyor

Condition: excellent (used), Year of construction: 2010, Boschert TRI 1500 CNC Z Rota Revo TRUMPF quick tool change system Punching force: 3 x 280 kN (28 tons) Station 1 Trumpf system tool - size 3 (105 mm) with spray device Station 2 Trumpf system tool - size 3 (105 mm) with freely indexable rotation Station 3 Trumpf system tool / Boschert Revotool - size 3 (105 mm) incl. Revotool with 8-position tool holder Travel distances x- 3000 mm (repositioning up to 9999 mm) y- 1580 mm Punching arm overhang: 1730 mm Psdsid I D Aspfx Acfsgn Tool system Trumpf size 1-3 (105mm) Labod 32060 graphic control / workshop programmable Max. sheet metal thickness: 6 mm (clamp opening) Max. stroke height: 90 mm, continuously programmable upwards and downwards. Punching scrap extraction Ball bearings in the machine table Table width left + right: 3200 mm each Table depth: 2810 mm Table height: 900 mm Overall width: 6482 mm Overall depth: 4600 mm Overall height: 2110 mm Drive power: 25 kVA Machine weight: 15,800 kg Hydraulic oil capacity: 160 l Color: Blue RAL 5017 / Light gray RAL 7035 Machine year of manufacture: 2010 Very well-maintained condition - Overhauled with a large amount of accessories

Condition: used, • Manufacturer: MHG Strahlanlagen GmbH • Max. glass thickness: 70 mm • Max. glass size: height 1500 mm, length 3,000 mm • Open top • Dimensions: L 6200 x W 2500 x H 3000 mm Pgodpsxu Au Dsfx Acfjn • Total height: 2300 mm • Number of nozzles: 2 + 1 manual hand gun • Complete documentation available • Blasting speed steplessly adjustable: 100 – 500 mm/s • Blasting nozzle diameter: 6.5 mm • Air consumption at 6 bar (L/min): 1200 litres with 2 nozzles • Connection values: 230/400 V/50 Hz/3x16 A

Condition: new, Year of construction: 2026, Set Including LUFT 1500 COMPACT Screw Compressor with VSD Inverter and N10S Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest innovations in pneumatic systems, combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction, and high performance guarantee efficient and trouble-free operation. Additional Dual Filtration at the Dryer Included! Key Features Innovative Design Our screw compressors are based on advanced engineering and European manufacturing precision. The robust construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Efficiency Optimization Psdpfx Acoxmg Npefegn Thanks to variable speed drive (VSD) technology and intelligent algorithms, the CORMAK LUFT 1500 COMPACT screw compressor dynamically adjusts energy consumption to the current demand for compressed air. This results in significantly lower operational costs while maintaining maximum performance. Integrated Refrigeration Dryer The COMPACT version with a built-in refrigeration dryer provides a space-saving and comprehensive solution in a single device. The integrated dryer ensures dry and clean compressed air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our screw compressors operate at exceptionally low noise levels. Effective noise reduction and vibration damping systems ensure a comfortable working environment, improving operator focus and overall workplace comfort. Smart Control The intuitive MAM electronic control panel is the command center of your compressor. It allows precise parameter monitoring, maintenance scheduling, and quick diagnostics—ensuring system stability and protecting key components. Adaptability to Your Needs We understand that each application is unique. CORMAK screw compressors can be configured with additional air treatment systems, allowing for perfect alignment with your industry's specific requirements. Dynamic Working Pressure Automatic pressure regulation ensures the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We are committed to environmentally friendly solutions. The energy-efficient technologies used in our compressors not only reduce your electricity bills but also limit environmental impact. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects your pneumatic installation. Variable-Speed Fan Automatically adjusts cooling performance to working conditions, improving energy savings. Dual Filtration System Pre-filter with 3.0 µm precision removes larger solid contaminants. Fine filter with 0.1 µm precision captures oil aerosols and other small particles, delivering ultra-clean air. Technical Specifications Specification Value Motor Power 11 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 1620 L/min Air Delivery at 6 bar 1580 L/min Air Delivery at 8 bar 1350 L/min Air Delivery at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions (L x W x H) 1550 x 740 x 1150 mm Weight 500 kg

Condition: new, Year of construction: 2026, LUFT 1500 Screw Compressor with Inverter is a state-of-the-art solution used in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and durable design, and high efficiency ensure effective and trouble-free operation. The LUFT 1500 INVERTER stands out with its direct drive, which offers significantly better efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher performance with lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM series electronic control panel, giving access to key compressor data and improving flexibility and control over your processes. Technical specifications: Motor power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Pgsdpfx Acsxnxzaofon Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1170 x 730 x 1020 mm Weight: 243 kg Manufacturer: Cormak

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,050 kg, KUKA KRC4 linear axis – a high-precision, robust motion unit designed for industrial applications. Provides accurate control of movement sequences and serves as a central component in automation processes and robotic systems within production environments. Durable construction ensures consistent, reliable performance even under the most demanding conditions. Linear Track Model: KL 1500/3T LINEAR UNIT 8 METER Year: 2013 Controller Cabinet: KRC4 Length: 8 meters Pedpfx Acew I Ez Iefogn Condition: USED, well working Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. ( Source: Kuka's Website )

Year of construction: 2021, condition: used, Eillert G-1500 Vegetable Cutting Line – As New Condition – Only 147 Operating Hours Available Immediately An exceptional opportunity to acquire an Eillert G-1500 universal vegetable cutting line in genuine as-new condition. This machine has only 147 operating hours and is supplied complete with a preparation table, outfeed conveyor, and three interchangeable knife sets. The G-1500 is a highly versatile vegetable cutting machine designed for medium-capacity production environments, including fresh-cut vegetable processors, salad factories, commercial kitchens, and food manufacturing facilities. It is suitable for processing a wide range of products including lettuce, cabbage, leeks, carrots, peppers, beans, herbs, and many other vegetables. Included in this Offer - Eillert G-1500 vegetable cutting machine - Stainless steel preparation table - Outfeed conveyor - 3 interchangeable knife sets - Touchscreen control panel - Mobile stainless steel construction - Complete and ready for production Key Features - Only 147 operating hours - Genuine as-new condition - Hygienic stainless steel design - Quick-release belts for fast cleaning and sanitation - Cutting compartment fully separated from mechanical components - Interchangeable knife system for maximum flexibility - Precise scissor-cutting principle for excellent product quality and shelf life - Suitable for leafy vegetables, root vegetables, herbs, and many other products Technical Information - Model: Eillert G-1500 - Capacity: approximately 100–800 kg/hour depending on product and cut size - Cutting range: 1–50 mm - Power supply: 400V / 3 Phase - Power consumption: approximately 1.25 kW - Stainless steel construction - Variable belt speed - Dual knife speed system Condition This machine has seen extremely limited use and has accumulated only 147 operating hours since new. The overall condition is excellent, both mechanically and cosmetically, making it a perfect alternative to purchasing a new machine at a significantly higher investment. Applications Suitable for processing: - Lettuce and leafy greens - Cabbage - Leeks - Carrots - Peppers - Beans - Herbs - Cucumbers - Onions - Various fresh-cut vegetable products Machine can be inspected and tested under power by appointment. Location: Emmeloord, The Netherlands Condition: As New Podpfozgfyaox Acfegn Availability: Immediate

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT133-544, DEMAG KBK crane canopy crane runway with dimensions approx. 10.5 x 6m Payload / lifting capacity 500 KG - 0.5to Technical data of the system: Crane runway made of Demag KBK1/2 rails System is supplied complete: Pgodpfety Sxwox Acfen KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets incl. steel 500KG chain hoist - lifting height approx. 3m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.