Used Rapid Dgl 200-E for sale (80,994)

Condition: new, functionality: fully functional, empty load weight: 114 kg, maximum load weight: 636 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,910 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 200 NEW VEHICLE Internal dimensions: 200cm x 106cm Total weight: 750 kg Payload: 636 kg Side board height: 30cm Unbraked single-axle flatbed trailer Side boards made of galvanized sheet steel Rear side board can be folded down and removed Bolted and galvanized steel frame Screen-printed plywood floor 13-pin electrical system Rear lights with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be stored on the rear panel Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side boards 40cm - Aluminum cover with bracket for, e.g., bicycle carrier - Flat cover with or without frame - High cover 80cm or 110cm - Coarse or fine mesh net - Spare wheel with bracket - Ramps Njdpfx Aozk Hwnjk Hswk Further accessories available on request! Pictures are for illustrative purposes only and may show accessories that incur an additional charge. Plus vehicle registration document and freight to Gera: €100 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: new, functionality: fully functional, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,067 mm, loading space height: 400 mm, total length: 2,910 mm, total width: 1,500 mm, total height: 900 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz HIT 200 Tipper NEW VEHICLE Internal dimensions: 201 cm x 106 cm Gross weight: 750 kg Payload: 622 kg Side wall height: 40 cm Unbraked single-axle low-bed trailer Removable side walls made of galvanized steel sheet Rear and front panels foldable and removable Easily convertible to a flatbed transport platform Bolted and galvanized steel frame Folding drawbar Phenolic plywood floor 13-pin electrical system Rear lights with reversing light, fog light, and triangular reflectors Plastic fenders Jockey wheel 13-inch M+S tires The trailer can be stored vertically on the rear panel when not in use Optional accessories: - 100 km/h upgrade - Rear support stands - Mesh sides - Side extension panels 40 cm - Aluminum lid with holder (e.g., for bicycle carriers) - Flat tarpaulin with or without bows - High tarpaulin 80 cm Nwsdpfx Aey Dq Dhek Hjk - Coarse or fine mesh net - Spare wheel with holder - Loading ramps Additional accessories available on request! Images are for illustration purposes and may show optional equipment subject to extra charge. Plus vehicle registration documents and shipping to Gera €100 net Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get expert advice by phone, visit our website, or stop by in person.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: HBRes, ABUS HB overhead crane system with dimensions of approximately 10x5m (5m span). Multiple units available! – Extension of the rail tracks possible! Nwjdpfeu I Uwxjx Ak Hok Load capacity / lifting capacity: 500 KG – 0.5 tons Technical data of the system: Overhead crane system with ABUS HB160/200 rails. The system will be delivered complete: HB rails, rail connectors, trolleys, end plates, supports/hangers, etc. Includes 500KG ABUS/Demag chain hoist. Model depends on availability. Lifting height approx. 4m. The crane is disassembled and immediately available. Used condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection only by prior arrangement. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG. Please request a non-binding quote for your overhead crane system with the required load capacity and dimensions.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Nedowcgr Espfx Ak Hjwk Sale to businesses only. No guarantee. No warranty.

Condition: used, mileage: 2,950 km, power: 90 kW (122.37 HP), first registration: 05/2025, fuel type: electric, overall weight: 2,660 kg, fuel: electricity, energy efficiency: A, color: black, gearing type: automatic, suspension: steel, total width: 2,159 mm, total height: 1,811 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, E07 Hill-start assist, LG7 LED High Performance headlights, Z6L Progressive, E1K Navigation package, FR8 Rear view camera, Q10 Cross member for trailer coupling, SA4 Airbag for driver and front passenger, 502 Digital extra: Updates for intelligent speed assistant, 805 AEJ X4/1, B25 Parking brake, electric, BA3 Active brake assist, BB0 Braking system with ABS and ASR, BB3 Electronic stability program (ESP), C0Z Door sill trims with "Mercedes-Benz" lettering, C1J Gear knob in leather, C6L Multifunction steering wheel, CK4 Handle strip above license plate in vehicle color, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM0 Bumpers painted, E00 HV battery - Bi-Relay version, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1W Selection of recuperation levels, E2J AC charging 22 kW / DC charging 75 kW, E2K Charging cable Mode 3 (Type 2, 3x32A, 22kW) 5m, E38 Extended range, E3N Digital extra: Extended MBUX functions, E3P MBUX multimedia system and navigation with 9.5-inch display, E4S Digital extra: Smartphone integration, E8T High-voltage battery (45 kWh), EB1 45 kWh battery - water-cooled, EC5 Pre-installation for digital extras, EI0 Wireless charging system for mobile devices, EM7 2 USB ports in the center console at the rear, ES1 12 V socket, passenger compartment, ES2 12 V socket, trunk / cargo area, EW5 Digital extra: Remote and Charging Premium, EW8 Digital extra: Remote and Navigation Services, EX8 Digital extra: MBUX Navigation Plus, EY2 Digital extra: Live traffic information. We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle as a trade-in. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, touch-up paintwork has been carried out on the vehicle as part of the preparation. No liability for printing and typographical errors. Errors and prior sale reserved ... more on our website. Nodpezunp Hjfx Ak Howk

Condition: used, mileage: 613 km, power: 5 kW (6.80 HP), first registration: 07/1989, fuel type: diesel, overall weight: 500 kg, color: blue, gearing type: mechanical, suspension: other, operating hours: 613 h, Year of manufacture: 1989. 13.5 kW, 613 operating hours, 2,800 rpm. Airflow rate: 2.1 m³/min. Fitted with a Deutz engine, highly soundproofed, complete with hoses and hammer set. Permissible total weight: 500 kg. FOR US, CONDITION AND A GOOD FEELING ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the provided number. //EXCHANGE, TRADE-IN, OR COLLATERALIZATION OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee. Further offers can be found on our homepage. The description and listed data do not constitute a guaranteed specification and are not legally binding. The only binding agreement is the purchase contract made at our dealership upon buying the vehicle. Subject to errors and prior sale! Nsdsx Upngjpfx Ak Hewk

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Weight: 3,200 kg Available immediately from stock Nedpfx Akovygh Nj Howk

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function Nwedpfx Aksvb Dcme Hjk - complete splash housing - coolant device, chip conveyor - diverse accessories *

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Nsdporbqtnofx Ak Hewk Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, No minimum price – guaranteed sale to the highest bidder! Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for hard PVC Suitable for HFFR formulations Suitable for elastomer compounds for low, medium and high voltage cables TECHNICAL DETAILS Screw diameter: 200 mm Length from feed to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed height: approx. 1,000 mm Nsdpfx Ajzr H Ebjk Howk EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The Mondini De/GS 200 type cheese spreader shown in the picture is for sale. The machine applies grated cheese like a "waterfall" onto the conveyor belt passing underneath. The application width can be adjusted up to approx. 15 cm widths. Infeed conveyor, and conveyor not included. Nodpfxsuwrr Sj Ak Hewk

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. Nwedpfx Akozr U Aus Hok - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Counter Spindle Yes

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Njdpfjzt I Srjx Ak Hswk Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: used, empty load weight: 10,920 kg, maximum load weight: 27,080 kg, overall weight: 38,000 kg, first registration: 05/2017, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65R22,5, color: white, gearing type: other, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, Chereau deep-freeze semi-trailer with Thermo King SLXi 200, model "Fleischer" - Refrigeration unit: Thermo King SLXi 200 - "Fleischer" model - Electrical system - Dimensions (L x W x H): 13.40 x 2.48 x 2.62 m - Disc brakes Nwedpfxezrpb Eo Ak Hek - Temperature recorder - BPW axles - FRC/ATP tires: 385/65/22.5 - Pallet box Very good condition, export price. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our listings, as this is independent of the location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is updated regularly. This information is to be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: good (used), Year of construction: 2001, screw diameter: 30 mm, clearance between the columns: 420 mm, injection pressure: 1,995 bar, injection weight: 96 g, mold height (min.): 200 mm, General information: Year of manufacture: 2001 Control system: NC4 Weight: 3950 kg Dimensions (length × width × height): 4.2 × 1.4 × 2.0 m Injection unit: Type: … / 200 Screw diameter: 30 mm Screw L/D ratio: 20 Specific injection pressure: 1995 bar Injection volume: 106 cm³ Injection shot weight: 94 g Clamping unit: Type: 60 / … Clamping force: 60 t Platen dimensions: 600 × 600 mm Distance between tie bars: 420 × 420 mm Mold height: 200 mm Opening stroke: 550 mm Nsdpfxezt Ivde Ak Hswk Maximum platen distance: 750 mm

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Njdpfxozt Ih Ts Ak Hswk Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Nwjdpfxex Ex R Ej Ak Hsk

Condition: used, Year of construction: 2022, total length: 8,340 mm, - Arbeitshöhe 20 m - Bodenfreiheit (Zugang) 0.45 m - Plattformhöhe 18 m - Maximale seitliche Reichweite 11.57 m - Ãœberhang / Knickpunkt Gelenk 7.91 m - Korbarm-Drehwinkel (oben / Boden) +65 ° / -60 ° - Tragfähigkeit des Arbeitskorbs 250 kg - Drehung des Oberwagens 350 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Anzahl Personen (innen / außen) 2 / 2 - Gegengewicht Versatz (Oberwagen bei 90°) 0.61 m - Innerer Wenderadius 1.27 m - äußerer Wenderadius 3.78 m - Fahrgeschwindigkeit - Transportmodus 5.30 km/h - Fahrgeschwindigkeit - Arbeitsmodus 0.65 km/h - Steigfähigkeit 40 % - Zulässige Neigung im Arbeitsmodus 4 ° - Bereifung Schaumgefüllt - Reifenmodelle 914 x 370 mm - Antriebsräder (vorne / hinten) 2 / 2 - Lenkräder (vorne / hinten) 2 / 2 Nsdpfx Aksztf Tgo Hjwk - Gebremste Räder / Räder 0 / 2 - Batterie 48 V - Nennspannung der Batterie / Batteriekapazität 48 V / 460 Ah - Batterieenergie 22 kWh - Integriertes Ladegerät / Integrated charger 48 V / 60 A - Bodendruck 11 dan/cm2 - Hydraulikdruck 240 bar - Fassungsvermögen des Hydrauliktanks 24 l

Condition: new, functionality: fully functional, power: 197 kW (267.85 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-200 is small efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: Nedpozwfqmsfx Ak Howk -Bunker: 15m3 -Production Capacity: 150-250 Tons Per Hour -Crusher Type: Cone Crusher -Maximum Feeding Size: 180mm -Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks -Total Motor Power: 197 kW MCC-200 is a combination of: • Bunker(Hopper) • Vibrating Feeder • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Nwodpfxozqt Ume Ak Hsk Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 39951, overall weight: 13,400 kg, Includes linear robot and peripherals. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Nedpozrd Rusfx Ak Hswk The machine has not been tested but was operational until the end.

Condition: good (used), Roller conveyor, conveyor belt, roller track, saw roller conveyor Nodpfxjzq Aaxs Ak Hewk -Roller conveyor: non-powered, length 3.0 m on a solid, height-adjustable base frame -Roller width: 200 mm -Roller diameter: 50 mm -Roller spacing: 140 mm -Transport dimensions: 3000/310/H890 mm -Weight: 44 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head Nwjdpszqyw Iofx Ak Hjk -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg

Condition: used, Year of construction: 2009, Technical details: turning diameter: 380 mm turning length: 538 mm total power requirement: 26 kW weight of the machine ca.: 5,2 t Nsdpfxjzq S Dyj Ak Hewk

Condition: good (used), Year of construction: 1970, Offer 25020 Technical data: - Pressure force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Hole in the table approx. 320 x 220 mm - Ram surface 940 x 400 mm - Ram adjustability 100 mm Nodpovnmblofx Ak Hjwk - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg