Used Renishaw Omp60 for sale (582)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours- Automatic Machining Time: 5,877 hours - Operating Time / Power On Time: 26,902 hours- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Technical Specification Lhodpey T Hbzjfx Acfok Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,838 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2020. It features an X-axis travel of 1100 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a clamping area of 1400 x 560 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. Lhsdpfx Aozibzxocfok • Distance spindle nose to table: 120–630 mm • Clamping area: 1400 x 560 mm • Spindle power: 13 kW (40% DC) / 9 kW (100% DC) • Spindle torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool magazine: 30 pockets (double gripper, loaded through spindle, programmed via control panel) • Max. tool diameter: 80 mm (130 mm with free adjacent pockets) • Max. tool length: 300 mm (from spindle face) • Max. magazine load: 120 kg • Feed drives: AC drives with ball screws • Feed rate (X/Y/Z): 30 m/min • Rapid traverse (X/Y/Z): 30 m/min Additional equipment • Renishaw tool probe • Renishaw workpiece probe • Clamps/workholding set Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1124343, travel distance X-axis: 1,060 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,800 kg, total height: 2,570 mm, total length: 4,000 mm, total width: 2,600 mm, table width: 630 mm, table length: 1,372 mm, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HAAS VM-3 CNC Vertical Machining Center – 2015 Price: €36,900 + VAT For sale is a HAAS VM-3 CNC Vertical Machining Center, manufactured in 06/2015. The machine is currently connected and operational and can be inspected and demonstrated under power by prior appointment. Technical specifications Manufacturer: HAAS Automation Model: VM-3 Year of manufacture: 06/2015 Serial number: 1124343 CNC control: HAAS Classic Control Software: M18.24B X-axis travel: 1,016 mm Y-axis travel: 660 mm Z-axis travel: 635 mm Maximum spindle speed: 12,000 rpm Spindle taper: 40 taper Automatic tool changer: 24 positions Power supply: 354–488 V / 3-phase / 50–60 Hz Equipment / Options TSC – Through-Spindle Coolant HSM – High Speed Machining Lodpfx Ajzt Nu Ujcfjhk Renishaw workpiece probing system Tool measurement / tool setting system Automatic tool changer Chip removal system Programmable coolant Coolant system with filtration Machine data from CNC control Run Time: 14,870 hours Tool Changes: 117,359 Power Ons: 2,608 The machine is well suited for precision CNC milling, tool and mould making and demanding 3-axis machining applications. The machine is offered for sale as a used machine. Inspection, functional testing and demonstration under power are available by prior arrangement. Location: Slovenia, EU Additional information, photos and a video of the machine in operation are available upon request. On-site inspection can be arranged by appointment.

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable Lhjdeviq U Espfx Acfjk With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Lhsdpstq Nlcsfx Acfsk Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer Lhodpoyh Ri Isfx Acfok - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting Lhsdpfjzt Nlmox Acfsk "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,960 h, functionality: fully functional, machine/vehicle number: 238911, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,325 mm, table length: 800 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,400 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,325 mm Table area (L x W): 800 x 800 mm Spindle speed: 8,000 rpm Spindle torque: 1,218 Nm Tool changer positions: 80 MACHINE DETAILS Number of pallets: 2 Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 3,000 x 3,500 mm Weight: approx. 30,800 kg Operating Hours (according to image) Operating hours: 54,415 h Power-on hours: 30,498 h Cutting hours: 25,960 h Lhjdpfx Asztqg Sscfek EQUIPMENT Tool magazine for 80 tools, SK 50 DIN69871 Air blow-off device on the workpiece Interface for high-pressure cooling system 70 bar, Knoll Chip conveyor Preparation for Mazak Monitoring System B, optical probe type OMP60 Synchronized tapping Rapid traverse with constant pitch during angular movements 2-pallet changer Spindle with increased torque NC rotary table with 360,000 positions MAZAK Monitoring System B, optical probe type OMP60 Automatic tool length measurement

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, controller manufacturer: Heidenhain, overall weight: 12,000 kg, coolant supply: 20 bar, number of slots in tool magazine: 36, Equipment: chip conveyor, documentation/manual, Manufacturer: MATEC Model: 30 HV Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Technical data Travel in X: 3,000 mm Travel in Y: 800 mm Travel in Z: 800 mm Universal machining center with 4-axis swiveling head Preparation for 5-axis machining with CNC rotary table Ledpfx Acezq T Efefjhk Spindle speed: 20–9,000 rpm Tool holder: SK40 Tool magazine with 36 positions Spindle power: 30 kW Internal coolant supply at 20 bar Coolant tank with 450 liters and paper band filter Portable electronic handwheel Ethernet interface Chip conveyor Central lubrication Full enclosure with roof Preparation for wireless Renishaw 3D probe Partition for dual-station system Condition Tool changer completely overhauled Machine in good, well-maintained condition Ready for demonstration under power and immediately operational

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 4-axis CNC turning center Control system: MITSUBISHI M730 Main and counter spindle 2 turrets, each with 12 stations (all powered) 2x C-axis 2x Y-axis (+- 25 mm) Lhsdpfozqu Uusx Acfsk Air filter by AR Filtrazioni Coolant system KNOLL KF 10 Chip conveyor Bar loader FMB 3-36 3200 turbo Renishaw measuring probe Numerous accessories (see images) Availability: End of October 2026

Condition: like new (used), Year of construction: 2023, operating hours: 3,363 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 257 mm, total length: 333 mm, total width: 233 mm, table width: 495 mm, table length: 1,320 mm, table load: 794 kg, rotational speed (min.): 12,000 rpm, overall weight: 6,200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,402 h, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Purchase both machines together for €125,000. Excellent opportunity to acquire a complete Haas machining package. • Haas VF-4SS • Taper CAT40 • Spindle: 12,000 rpm Inline Direct Drive • TSC (Tool Side Center) • Renishaw WIPS (Wireless Inspection Probe System) • High-Speed Machining Ljdpfxoztm N Nj Acfehk • Mist Condenser • Chip Conveyor • 30 ATC (Automatic Tool Changer) • Cutting Hours: 2,402 hours • Cycle Hours: 3,363 hours • First owner (company) • Complete service history • Maintenance performed by authorized service provider Teximp d.o.o. • No crashes or major repairs • + Approximately 15 tool holders • Company-owned machine, located in Croatia • Immediately available • Operational and available for inspection • Ready for immediate production

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera Lodpfx Aozc Ni Socfjhk • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: used, Year of construction: 2016, x-travel 800 mm y-travel 1020 mm z-travel 1020 mm Ledpfx Acezrpnfsfjhk Control SIN840D sl B - axis 360 x 0,001 ° A - axis -185 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206 / 159 Nm spindle diameter in front bearing 70 mm tool taper HSK-A63 tool magazin: 272 tool length - max. 400 / 465 mm tool diameter 68 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg Chip to chip time 4,2 sec. size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 10,00 x 6,00 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant, coolant through the spindle, chip conveyor, RENISHAW measuring probe, BLUM-Laser, GROB Spindle-diagnosis (GSD) Additional Tool-Magazine TM218, Pallett-Storage PSS630-R13-12

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator Lsdpfx Acjyr R A Eofehk • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: used, Year of construction: 1992, The WENZEL RS 30-12-15 CNC coordinate measuring machine (3D-CMM) is suitable for precise 3D measuring tasks in quality control, production metrology, and incoming goods inspection. It is equipped with a CNC control system and a Renishaw PH10 / TP20 probe system. The large measuring range of 3,000 x 2,000 x 1,500 mm (X/Y/Z) enables the measurement of large workpieces. The machine is ideal for use in tool, mold, and machine manufacturing, as well as in any application where highly precise coordinate measurements are required. Lsdpfx Acjzqc Hrefjhk

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Machine total operating hours: 3200 h Spindle operating hours: 470 Gildemeister CTX Beta 1250 TC, Year of manufacture: 2013, Control system: Siemens 840D ERGOline with ShopTurn Main spindle as an integrated spindle motor, ISM 76, Drive power: 25/34 kW (100/40% duty cycle), 5000 min-1 Hollow chuck (hydraulic), internal pull rod - 67 mm Max. pulling force 68 kN at Pmax. 45 bar C-axis and spindle brake (hydraulic) Cross slide on top with turning/milling spindle as a motor spindle, with hydraulic clamping for turning, tool holder HSK-63A DIN 69893 Y-axis ± 100 mm B-axis ±110° with pneumatic clamping Turning length 1250 mm Tool disc magazine 1 x 24 positions Tailstock, automatically positionable, hydraulically actuated, with integrated center bearing Absolute, direct linear encoders in X, Y, Z axes Coolant pump 6 bar; 20 l/min, chuck flushing system, externally on the main spindle, coolant system externally for the turning/milling spindle Hinged belt chip conveyor, discharge height 1200 mm Cooling system for spindle motors, motor console, turning/milling spindle, B-axis torque motor USB interface, Ethernet interface Connection for oil mist extraction, electrical/mechanical Eccentric turning and milling Milling of gears using a generating process 5-axis simultaneous machining, contour machining Tool monitoring system, Counter spindle as an integrated spindle motor Workpiece in-process measurement system by Renishaw Reinforced coolant pump 12 bar Chuck flushing system on the main and counter spindle Tailstock function for the counter spindle Coolant supply through the counter spindle Lsdpfx Ajzqtmiecfshk DMG Netservice

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. • Table size: 500 × 500 mm • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms • EXW sale • Technical documentation available upon request • Available for commercial valuation • Possible technical inspection / site visit • Direct purchase negotiations possible Additional equipment Lhjdpfxey Ey N Nj Acfek • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor

Condition: used, Year of construction: 2015, input voltage: 354 V, type of input current: three-phase, Equipment: chip conveyor, We offer this used Haas VF-6SS vertical machining center, year of manufacture 07/2015. The machine is in excellent condition, with no collisions. Serial number: 1124558 On timer: 11205h VF-6SS - Super Speed ​​VOC 64" x 32" x 30" CC6 - Chip Conveyor Screw P-COOL - Programmable Coolant Nozzle PFDM - Power Failure Detection Module RJH-C - Wheel Remote Control with Color LCD Lhsdpfjy D Epfsx Acfsk RTAP-3 - Direct Tapping WIPS-R - Renishaw's Intuitive Wireless Probing System MACRO - User Defined Macros COORD - Coordinate Rotation and Scaling SOM - Spindle Orientation TSC50T - Through-Spindle Coolant, 300 psi (21 bar) Emulsion Separator If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min Lhjdpfx Acozqcr Ijfok • Tool change time: 0.5 s; chip-to-chip time: 5 s • Machine currently under production; can be inspected under power by an official Okuma technician • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual • Delivery: Immediate, subject to prior sale Additional equipment • Renishaw tool measuring system • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders • Transformer Technical Specification Taper Size BT 50

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Lhjdpfx Acewcxb Sofjk Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Complete package includes: Measuring machine 64-bit CNC controller Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Calibration artifact Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Lhsdozqunuopfx Acfsk Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 90 Nm, controller manufacturer: FANUC, controller model: series 31i-B5, rotational speed (max.): 24,000 rpm, tool length: 200 mm, tool diameter: 60 mm, tool weight: 4,000 g, input voltage: 400 V, type of input current: three-phase, number of tool turrets: 1, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: chip conveyor, CNC Machining Center CHIRON FZ12 MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC series 31i-B5 Stroke X axis: 550 [mm] Stroke Y axis: 320 [mm] Stroke Z axis: 420 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] X/Y/Z axis acceleration: 10/12/15 [m/s] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 8000 [rpm] Max. turning spindle torque: 90 [Nm] Max. counter spindle speed: 6500 [rpm] Counter spindle torque: 14.3 [Nm] Tool changer magazin number of stations: 24 Max. tool lenght: 200 [mm] Max. weight of single tool: 4 [Kg] Max. tool diameter: 60 [mm] Number of tool stations: 12 Number of tool stations driven: 12 Max. speed driven tools: 5000 [rpm] Milling head spindle attachment: HSK-A 50 Stroke B axis: -10 [°] / +100 Max. milling spindle speed: 24000 [rpm] Max. milling spindle power: 36 [kW] Max. milling spindle torque: 29 [Nm] Tool change time: 0.9 [sec] Chip to chip time: 2.4 [sec] Rated current: 125 [A] Total power required: 85 [kVA] Supply voltage: 400 [V] INCLUDED EQUIPMENT: 1 × High Speed Plus package 1 × LNS QUICK LOAD SERVO 80 S2 bar feeder 1 × KNOLL KF 150/500 paper band filtration unit 1 × 40 bar high-pressure coolant system 1 × Oil cooling unit 1 × KNOLL 600 K-1/200 chip conveyor 1 × RENISHAW workpiece probe 1 × RENISHAW TS27R tool setter 1 × ELBARON oil mist extraction unit Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Ljdpfx Aszqbdiecfjhk Machine similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, as well as CNC milling, drilling and tapping machines, and CNC grinding machines.

Condition: used, WILLEMIN MACODEL 508S2 is a vertical machining center delivering high precision, accuracy and reliability. Working capacities: 6 axes; rotary table Ø180 mm, table load max 15 kg; travels X400 Y200 Z385 mm; B -100/+30°; resolution 0.0001. Main specs: spindle HSK E40 50–42000 rpm; spindle power 10/15 kW; torque 8/12 Nm; rapid traverse 60 m/min; acceleration 10 m/s²; air 6 bar; supply 3×400V 50Hz; total power 35 kVA; weight ≈5000 kg. Equipment: BLUM 3D Z‑MT tool setter, Renishaw OMP400 probe, Donaldson oil‑mist extractor, Turbo Separator filter, automatic central lubrication. Achieves tight tolerances for automotive, watchmaking, aerospace, medical and machine‑tool sectors. Ledpfx Aezqbhuecfshk

Condition: used, WILLEMIN MACODEL 408S2 is a Machining and turning center from bar with high precision, superior accuracy and reliability. Travels X 250 mm, Y 200 mm, Z 310 mm; B axis -100°/+30°; resolution 0.0001; bar capacity Ø32 mm; tool magazine 24 positions; tool length 95 mm, max weight 1 kg; tool change 0.8 s; Ø with free adjacent pockets 80 mm. Spindle nose HSK E-25, stepless up to 75'000 t/min; voltage 50 Hz 3x400 V; total power 16 kVA; machine weight ~2300 kg; footprint L1840 x W2450 x H1385 mm. Equipment: Renishaw OMP 40-2 touch probe, BLUM Nano NT tool break control, coolant system, oil mist extractor, coolant filter, fire extinguishing system. Delivers tight tolerances; ideal for watchmaking, medical, aerospace, automotive and tooling. Ljdpfozqbhbex Acfjhk

Condition: excellent (used), Year of construction: 1999, Mitutoyo Euro C9166 Apex Measuring ranges 900x1600x600mm Accuracy 2,9 + 4L/1000µm Software selectable: - Mitutoyo MCOSMOS-1 V3 (upgrade V5 for € 4.000,--) - EasyCMM I++ Server plus Inca Professional (€ 8.000) Probe Renishaw PH1 with either: - Renishaw Touch probe TP200 - Renishaw Touch Probe TP20 Selectable options: - Renishaw PH10 (T oder M) - New PH10M or Tplus Head and Probe (upgrade) - Bilz Pneumatic Vibration Damping System on demand Installation & Calibration and software training (plus additional travel expenses) Including 3 Month Warranty on machine and probe Lhsdpfx Ashtqxujcfok (excl. travel expenses)