Used Ride-On Srcrubber Drier for sale (9,362)

Condition: used, machine/vehicle number: 8701.3070, Year of construction: 2000, load capacity: 1,250 kg, lifting height: 3,000 mm, free lift: 1,520 mm, construction height: 1,920 mm, fork length: 1,150 mm, total length: 2,120 mm, drive type: Elektro, construction width: 827 mm, Cross-seat pallet truck Hedpfx Aeu D R E Reb Njfg Chassis number: 8701.3070 Load center: 600 mm Technical condition: good Front tires Type: Vulkollan Front tires Condition: 20 - 40% Rear tires Type: Vulkollan Rear tires Condition: 20 - 40% Description: the device can be overhauled on request (more than one price)

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: 16663, water tank capacity: 85 l, sweeping width: 1,250 mm, construction height: 1,100 mm, product width (max.): 1,030 mm, enginetype: Electric, manufacturer: [div] Hfodsxubigepfx Ab Neg

Condition: good (used), Year of construction: 2018, Voltage in Volt: 400 Frequency in Hz: 50 IP protection class: 55 Protection class: I Power consumption in kilowatts: 4 Air volume without hose in m³/h - l/min: 489 - 8150 Maximum negative pressure in kPa-mbar: 30 - 300 Noise level in dB(A): 72 Tank volume in liters: 100 Main filter type: Polyester Star Filter Main filter area in cm²: 19500 HEPA H14 in cm²: - Inlet in mm: 70 Dimensions L x W x H in mm: 1130x600x1530 Weight in kg: 139 Optional Longopac system: - Hfedor E Uwuspfx Ab Nsg 5-pole three-phase plug: Included Plug with phase inverter: Included Filter shaker (manual): Included Accessory container: Included Removable container: Included Chassis with brakes: Included Motor protection switch: Included Pressure gauge: Included Three-phase side channel blower: Included Hose and cable holder: Included Cyclone plate: Included Vacuum relief valve: Included

Condition: used, 113m³ above-ground steel tank on steel supports Diameter: 3.10m Length: 15m Cylinder wall thickness: 8mm Front wall thickness: 12mm The tank has a hole in the top (visible in the photo), which we will weld. Hjdpfew El Dlex Ab Nsfg The following optional additions to the tank are priced separately: Applying an state hygiene institution approved coating A DN50 float valve, or a DN100 float valve, including installation. The price depends on the float valve diameter. We have our own specialized trailer. Delivery costs depend on the destination.

Condition: good (used), Manufacturer: Taski Tip: CO 700 BMS Works! Hfsdpfxshzrbge Ab Nog Battery is not good! Without scrubber!

Condition: new, Year of construction: 2022, Daewoo, DAFL50A, 2022, scrub machine, brand: Daewoo; type: DAFL50A; year: 2022; NEW, NEVER USED, working width: 850 mm; electric: yes; hours on display: 0 hr; battery charger: yes; electric connection: 220 V; own weight: 160 kg; total dimension L: 1100 mm; total dimension W: 540 mm; total dimension H: 1020 mm; description: internal charger, unused, works on battery, batteries included; LOCATED IN POLAND Hjdpfxeh Nuy Ae Ab Nofg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 2,200 mm, total width: 3,400 mm, total length: 2,400 mm, overall weight: 4,500 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, Technical characteristics: CAPACITY: up to 1200 boxes per hour PULLER SPEED: up to 3m/s INSTALLED POWER: 23 kW CARDBOARD TYPE: single, double and triple wall up to 14mm and 1400GSM in standard option and HD cardboard over 2000GSM per request. MAXIMUM BOARD SIZE: 2400mm X 7000mm MINIMUM BOARD SIZE: 300mm width x 650mm length DISTANCE BETWEEN SLOTTING KNIVES: 50mm – 2200mm (500mm segmented slotting knives) Hsdpfx Absfivfye Nsfg WIDTH OF SLOT: 8mm Handholder tool x 1 - The unit is positioned automatically and the distribution of cuts is also setup digitally via control unit. The total force the die cut can exert is 5200 Newton. Creasing Wheels x 4 - The machine has four creasing wheels and it is possible to use only the selected wheels, i.e. not crease the full length of the cardboard. Knife tool x 2 - The knives are made of high density steel alloy which allows processing 1400 GSM, and they are positioned automatically. The transversal creasing tool is integrated in the knife sub-frame. The knives are segmented and can be positioned independently from one another. Cross cutting tool x 1 - The module is also utilized for production of pallet boxes with loading flap. The unit can produce transversal cuts anywhere on the sheet, which enables it to create box locking mechanisms, loading flaps and windows on the box. In combination with longitudinal cutting knives, square and rectangular shapes can be cut out in the sheet, effectively replacing die cutting for those forms. Circular blades x 6 - This unit can perform work selectively and anywhere along the length of the corrugated sheet. The unit is utilized when producing FEFCO 0204, FEFCO 0403, glue flap or material reformatting. Also, in combination with cross cut, windows and similar square/rectangular shapes can be cut. Printing unit x 1 - The printing unit is capable of outputting single color prints of up to 1000mm of width and 870mm in length, making it the perfect choice for standard transportation box markings. The imprint can be placed anywhere on the box, including creased areas - positioned automatically. Gluing module unit x 1 -.. The unit is servo powered and moves at speeds up to 1m/s. The glue can be dispersed in lines or in beaded patterns anywhere along the corrugated cardboard sheet. This module is powered by NORDSON adhesive systems. Control unit - 21 inch touch sensitive HD widescreen color display with user friendly UI. The unit itself comes with predefined FEFCO standard models in memory. Warranty 12 months, provided training and support for services and parts.

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Stroke (mm): 1000 mm Daylight (mm): 1400 mm Advance Speed (mm/sec): 1400 mm/sec Hfjdpfowbtn Rjx Ab Nog Return Speed (mm/sec): 200 mm/sec Working Speed (mm/sec): 2–12 mm/sec Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotary table diameter: 1,700 mm, rotational speed (max.): 10,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Universal Machining Center Machine type: DMG DMU 200 P Hjdpfx Asxuqn Seb Nefg Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: used, Year of construction: 2002, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 10,000 rpm, Universal machining center Machine type: DMG DMC 340 U Control: Heidenhain iTNC 530 Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 2,800 mm Y-axis: 3,400 mm Z-axis: 1,600 mm B-axis C-axis Rapid traverse: (X/Y/Z): 60 / 30 / 40 m/min. Swivel head Speed range: 10,000 rpm. Drive power: 44/32 kW Torque: 288 Nm Tool holder: HSK 100 Tool positions: 120 Tool diameter: 130 / 250 mm Tool length: 650 mm Tool weight: 30 kg NC rotary table: 2500 x 2000 Pallet system Number of pallets: 2 Pallet size: 2,500 x 2,000 mm Top table: D. 2,800 Features: Internal cooling (IKZ): bar Hfodpsx Uxc Tofx Ab Nsg Coolant tank: l Chip conveyor Electronic handwheel Chip flushing gun

Condition: used, sheet width 400 mm plate thickness 3 mm stations . System with the best coiler, straightener, eccentric press, and profile rolling machine Cutting-off system and numerous accessories Iron double coiler Type SFD 2000 Schleicher straightener Edelhoff AZR 3/100 eccentric press Press force 100 t Stroke adjustment 20-110 mm Ram adjustment 100 mm Ram strokes 105 /min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hedpfx Abjyq Sx Ee Nsfg If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, overall weight: 24,000 kg, Year of construction: 2023, Tridem chassis with 24 ton payload We are offering a damaged tridem chassis with a payload capacity of 24 tons. It is fitted with three ADR axles, each with a 9 ton load capacity. A basic ABS system (U-ABS from Haldex) is also installed. No pneumatic brake, braking is via single-acting cylinder. Condition: used The chassis has seen little use and has been involved in one accident. Hedpfeyh Anpox Ab Njfg

Condition: excellent (used), Here we offer you an Iridex laser system OcuLight TX. IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, cable OcuLight TX solid-state laser systems emit true continuous-wave green laser light (532 nm) for ophthalmic applications. The models OcuLight TX and GLx are also indicated for otolaryngological applications. Improper use of the laser system may result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedectomy IRIDEX OcuLight TX Green 532 nm Laser Outstanding efficiency with a whopping 2500 mW of deliverable laser energy provides pulse duration and pulse intervals from 10 to 3000 ms Provides TrueCW laser pulses for maximum control and precision Flexible range of delivery devices and wide choice of handpieces for different surgical procedures Optional remote control and wireless foot control to reduce clutter and improve ergonomics and control Quiet operation eliminates distractions Lightweight, portable design is easily transported between treatment rooms and offices IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominal 632 nm Cooling: on-demand whisper fan 10-3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe and SLA Power output: EndoProbe 0-2000 mW, LIO 0-2000 mW, OtoProbe 0-2500 mW, SLA 0-1800 mW Weight: 6.4 kg Hfjdpsnp Icaofx Ab Neg Length: 15 mm width: 30 mm Height: 30 mm Type: IRIDEX OcuLight TX Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, functionality: fully functional, 1 used: Universal Pantograph Engraving Machine • Model: Fridrich Deckel GK 12 • Application: Fine engraving, copy milling, model making • Working area (workpiece): approx. 200 x 350 mm • Copy template area: approx. 320 x 450 mm • Enlargement/Reduction: 1:1.5 to 1:10 • Year of manufacture: unknown • Spindle motor: approx. 250W • Spindle speed: multiple stages, variable Hedpfx Ajxa Ap Ejb Nofg • Condition: used, tested, fully functional

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 8,000 mm, workpiece height (max.): 30 mm, workpiece weight (max.): 150 kg, TECHNICAL DETAILS Maximum plate length: 2,500 mm Maximum plate width: 8,000 mm Maximum plate thickness: 30 mm Maximum weight: 150 kg MACHINE DETAILS Tilting station transfer height: 680 mm Belt conveyor with lifting function for discharge: 40 mm Belt conveyor with lifting function for transfer to roller conveyor: 265 mm Roller conveyor and belt conveyor transfer height: 920 mm Conveying direction Hfsdpoy Nbcxefx Ab Neg Lengthwise on roller conveyors Crosswise on toothed belt conveyors Electrical Data Operating voltage: 400 V +N +PE - 50 Hz Control voltage: 24 V DC Brake voltage: 230 V AC Drive Technology Manufacturer: SEW Protection class: IP54 Quick-connect plug and hybrid cable on SEW fieldbus modules EQUIPMENT Sensors: Leuze Metalwork

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AHH/157/00, functionality: fully functional, total length: 12,500 mm, total width: 2,400 mm, overall weight: 4,000 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit type: Pre-milling unit 2. Unit type: Glue application unit 3. Unit type: Pressure rollers 4. Unit type: End trimming unit 5. Unit type: Rough milling unit 6. Unit type: Corner rounding unit 7. Unit type: Radius scraping unit 8. Unit type: Flat scraping unit 9. Unit type: Brushing unit Hodpfx Aey Nxrdob Nsfg MACHINE DETAILS Voltage: 400 V Current consumption: 36 A Fuse: 63 A Power: 14.4 kW Dimensions & Weight Dimensions (L x W x H): 12,500 x 2,400 x 1,900 mm Weight: 4,000 kg EQUIPMENT Tools CE marking

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Hsdewuzzfepfx Ab Nsfg Position 3: Double Sided Squaring/Edgebanding Machines STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Condition: used, machine/vehicle number: 008192, Max. machining width: 1350 mm Hfedpfx Abox A E Szo Njg Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr sectioned swab: yes

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Hodpow Idc Defx Ab Nefg Maximum panel thickness: 12 mm Operating Units: 9 nr

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Hfodpfx Abjgavc Rj Njg

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Hfedpfjgavc Usx Ab Neg

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Hodsgavc Aopfx Ab Nsfg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Includes: 2021 Ebbco Filtration & Chiller unit Model PMF-MWF5-623-P-40K capable of filtering & chilling up to 2 grinders. 40,000 BTU Chiller & filtration up to 1 Micron. • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 Hjdpeu Ez Husfx Ab Nsfg • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 • Currently in production producing very accurate & consistent tools. Can be viewed under power • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like.

Condition: used, Donaldson Torit industrial dust collection system, main silo is approx. 40' tall with 2 blower fans, includes all duct work, dust collection system includes duct work inside building, does not include dust container shown in photo, unit only, 1 blower fan has 150 HP, 3 phase motor, control panel has Allen Bradley Panel View Plus 1000 touch screen display, winning bidder responsible for proper removal. Please contact auction manager for removal information of unit. Hfsdpfx Absxdc Tfj Neg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 693068, overall weight: 7,300 kg, power: 30 kW (40.79 HP), Walter Helitronic Vision CNC Tool & Cutter Grinder with Pallet Loader Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Vision, s/n 693068, year 2008 Description: Hfjdpfxouqzdps Ab Njg Suitable to manufacture and regrind metal and woodworking tools of all kinds. Can be viewed under power. Specifications: • Longitudinal movement (X-axis) 480 mm • Y axis vertical movement 320 mm • Z-axis transverse movement 700 mm • Rotary table swivel range C-axis +/- 200 ° • Workpiece Holder ISO 50 • Max. Workpiece diameter 320 mm • Workpiece length circumferential grinding 370 mm • Workpiece length for face machining 320 mm • Accuracy linear resolution 0.0001 mm • Radial resolution 0.0001 ° • Diameter of the spindle 100 mm • Grinding wheel mount: HSK50 • Diameter of the grinding wheel 200 mm • Grinding spindle speed 0 – 12,000 rpm., • Top performance 30 kW • Connected load 35 kW (460 V / 60 Hz) • Weight approx. 7,100 kg • Dimensions L x W x H 3649 x 2490 x 2301 mm Accessories: • Does not include wheel opening stick fixture seen in the pictures • Stepless speed control, probe, pneumatic workpiece clamping • Electrostatic mist extractor • Fire extinguishing system • Oil collecting pan, 2 grinding wheel flanges, Complete set of Manuals • Turmoil Drive Chiller • Loader Pallets: 8pcs – 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1-1/4” • 10pcs - HSK Wheel Arbors Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • The computer was upgraded & is very fast rendering tools in Tool Studio Condition: • Excellent condition, very accurate & consistent. October 2023 Y axis Complete rebuilt, Linear motor, rails, Compensation Cylinder, Festo Booster Pump done by United Grinding. • 1 Micron Filtration system was used on the machine (not included), so it’s been kept extremely clean • We can load onto a flatdeck for shipping for $1200. We can also provide shipping quotes if you would like & crating for Sea Freight shipping.