Used Sapi Sandstrahlanlage Großer Sandstrahlcontainer for sale (171)

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Njdewrm Dtspfx Abzjwi Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swivel and tilting table (recently overhauled) >> Speed range: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Features: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Equipment and Accessories: Nwodpfxoxu E I Hj Abzoi >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are nearly new. The swivel and tilting table is as new. An oil change has been carried out. The machine has been mechanically and electrically tested. The digital readout makes work easier and more precise. Take advantage of the opportunity to inspect and test the Deckel on-site under power. The machine is immediately available!!!

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: Nodovtp Edopfx Abzewi >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min Nwedpfxjw Evq Ao Abzoi >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on the spindle carrier >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device Nodpjwthbiefx Abzewi About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch Nedpfsu Aftgex Abzewi >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, High precision drilling and milling machine Fehlmann model Picomax 51 CNC Heidenhain TNC 360 very good condition CE conform Hthrgw39X Technical Data: >> Year of construction: 1995 >> Travel X/Y/Z 420/ 240/ 120 mm >> Travel distance W 450 mm >> Clamping surface (L x W) 730 x 280 mm >> Permissible table load 75 kg >> Distance table - spindle nose 0 - 560 mm >> Feed speed X/Y 1 - 7200 mm/min Nwedpfx Ajuxprlsbzji >> Feed speed Z 1 - 3600 mm/min >> Tool quick-change system SF 32 >> Infinitely variable speed range 9200 rpm >> Drive power 4 kW >> Space requirement approx. (W x D x H) 2.0 x 1.5 x 2.4 m >> Fourth axis dividing head About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 51 CNC in very good condition with CE conformity. It has a Heidenhain TNC 360 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The tool holders (see pictures) are included. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C infinitely variable feed in light gray Super condition Technical data: >> Year of construction 1978 Machine no. 2101-0465 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed stepless 2 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm Njdpfx Aot Aav Iebzswi >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital indicator K&C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The bellows are all new. On this newer FP1 model, the feed is infinitely variable in two axes and the machine also has a rapid traverse. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm Nodpfxswag Sto Abzjwi >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Nsdpfx Abewrnf Eezjwi Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power.

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: Nwodpfx Ajv Ed U Djbzji >> HS 401 line control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 Nwsdswxxd Ejpfx Abzoi >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min Nedpfxow Sv Ias Abzewi - Drive output: 6 kW - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Accessories and Equipment: - HS 401 contour control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication Nsdpsxghtvsfx Abzswi About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 Nwsdpfev Rppkex Abzsi >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3 - axis digital readout Heidenhain original condition !!! Technical data: Nwsdpsu Nvxmsfx Abzji >> Machine no. 56560/08 Year of construction approx. 1975 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1,5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> S20x2 tightening system >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device About the machine : We offer a universal milling machine Deckel FP1 in very good original condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the lids on site under power.

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Nwjdpfx Abjvyuqfjzji

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Nsdpfx Abjvwgc Uezowi

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 935089, - Wire EDM machine with automatic wire threading - Enclosed diamond wire guides for various wire diameters - Collision protection on all 5 axes (ICP) - Clamping accessories shown in the image are included in the scope of supply TECHNICAL DETAILS Travel ranges X / Y / Z: 550 / 350 / 400 mm Travel ranges U/V axis: 550 / 350 mm Taper: max. +/- 30° at a height of 400 mm Workpiece dimensions: max. 1200 x 700 x 400 mm Opening width: 1020 mm (accessible from one side) Workpiece weight: max. 1500 kg Surface quality: max. Ra 0.22 μm Cutting speed: max. 300 mm²/min Available wire diameters: 0.15 – 0.30 mm Control: Charmilles Millenium with Windows operating system (12” TFT touchscreen) MACHINE DETAILS Nwodpfolru Rbex Abzji Dimensions (length x width x height): 2600 x 2810 x 2240 mm Net weight: 3300 kg Connection voltage: 400 V / 3 phases / 50/60 Hz Connection power: 10 kVA LAN connection: included, for network integration

Condition: new, functionality: fully functional, empty load weight: 144 kg, maximum load weight: 606 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, color: grey, Year of construction: 2024, operation weight: 750 kg, B Führerschein Anhänger GARDEN TRAILER 264 KIPP mit Bordwandaufsatz [zusätzliche 40 cm] und Stützrad Ersatzrad mit Halterung optional Art der Aufhängung ungebremste Achse bis 750 kg Gesamtabmessungen: 3541 mm (Länge) x 1690 mm (Breite) Bordwände Stahl Tragrahmen aus feuerverzinktem Stahlblech Art der Ladefläche aus Siebdruckbodenplatte Verwendung: Umzüge, innerbetrieblicher Warentransport Der Anhänger verfügt außerdem über den Kippmechanismus, mit dem praktisch alle Ladungen blitzschnell be- und entladen werden können. Nwodpsuih Hgjfx Abzsi Sehr große Transportfläche, die den Transport von großen Waren erleichtert Überdurchschnittliche Festigkeit mit zusätzlichen Stützbalken unter der Ladefläche Umrissleuchte, die beim Rückwärtsfahren von größer Bedeutung sind Korrosionsbeständige und sehr robuste Kotflügel Die Möglichkeit, den Anhänger auf die Heckklappe zu legen [so stellt man sicher, dass der Anhänger wenig Platz einnimmt]. Die Räder wurden bei diesem Modell seitlich montiert (und nicht unter der Ladefläche), was eine sehr bequeme Lösung beim Fahren ohne Ladung darstellt BORDWÄNDE: alle Bordwände wurden aus verzinktem Stahl hergestellt Hintere Bordwand aufklappbar und komplett demontierbar 70 cm hoch [Standardbordwände, die 30 cm hoch sind und Bordwandaufsatz - zusätzliche 40 cm]. Wir bereiten die notwendigen Dokumente für Sie vor, die Sie für die sofortige Anmeldung benötigen, d.h.. Rechnung, EG-Übereinstimmungsbescheinigung, Fahrzeugbrief, Gewährleistungsbuch (2 Jahre Garantie) und unser Zertifikat.

Condition: new, functionality: fully functional, empty load weight: 190 kg, maximum load weight: 560 kg, overall weight: 750 kg, axle configuration: 2 axles, loading space length: 2,641 mm, loading space width: 1,256 mm, tire size: 155/70 R13, color: grey, Year of construction: 2024, Anhänger Garden Trailer 264/2 KIPP [inkl. zusätzliche Bordwände und Flachplane]. Hersteller UNITRAILER Modell Garden Trailer 264/2 Kipp Ersatzrad mit Halterung optional Wo befinden sich die Räder außerhalb des Laderaums Nwjdpfx Abjuk Hl Ejzsi Art der Aufhängung 2 ungebremste Achsen 750 kg Gebremst nein Bordwände Stahl Art der Ladefläche aus Siebdruckbodenplatte Kippbar ja Rückfahrlicht Nein Verwendung Umzüge, innerbetrieblicher Warentransport Sehr große Transportfläche, die den Transport von großen Waren erleichtert Korrosionsbeständige Struktur Überdurchschnittliche Festigkeit mit zusätzlichen Stützbalken unter der Ladefläche Der Anhänger verfügt außerdem über den Kippmechanismus, mit dem praktisch alle Ladungen blitzschnell be- und entladen werden können. Umrissleuchte, die beim Rückwärtsfahren von größer Bedeutung sind Korrosionsbeständige und sehr robuste Kotflügel Rückleuchten, die vor Beschädigungen geschützt sind Die Räder sind bei diesem Modell an den Seiten der Transportfläche positioniert, was eine sehr bequeme Lösung beim Fahren ohne Ladung darstellt Ladeflächenabmessungen: 2640 mm (Länge) x 1250 mm (Breite) Gesamtabmessungen: 3541 mm (Länge) x 1690 mm (Breite) Standardbordwände (30 cm hoch) + zusätzliche Bordwände (40 cm hoch) Wir bereiten die notwendigen Dokumente für Sie vor, die Sie für die sofortige Anmeldung benötigen.