Used Sapi Sandstrahlanlage Großer Sandstrahlcontainer for sale (178)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Dedpfjwc Rk Ejx Agmeck Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Djdowc Afhspfx Agmock Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, workpiece length (max.): 1,000 mm, workpiece width (max.): 700 mm, workpiece height (max.): 400 mm, year of last overhaul: 2025, GF AgieCharmilles FORM 30 Year of manufacture: 2015 AC FORM HMI control Travel ranges (X/Y/Z): 600 x 400 x 400 mm Max. workpiece dimensions: 1200 x 700 x 400 mm Max. workpiece weight: 1000 kg Work table dimensions: 800 x 600 mm Max. electrode weight: 25 kg Integrated C-axis, rotational speed U = 0-100 1/min Min./Max. distance between table and chuck: 250-650 mm ISPG generator with 80 amps Best surface finish: Ra 0.1 µm 6-position electrode changer in magazine Operation via 15" LCD screen with mouse Handbox for manual machine setup Machine dimensions: 2700 x 1600 x 2858 mm Djdpfx Aozi A Dbegmjck Total weight: 4400 kg After receiving your order, the machine will be cleaned, serviced, and tested at our facility. We would be happy to offer you the following options: - Transport - Commissioning and training - Clamping devices - Dielectric fluid

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,875 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 900 mm, workpiece length (max.): 1,450 mm, overall weight: 6,300 kg, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control system: Charmilles Millenium Travel ranges (X / Y / Z): 800 x 550 x 510 mm Travel ranges (U / V): 800 x 550 mm Max. conical angle: +/- 30° at a height of 510 mm Integrated Collision Protection (ICP) on all 5 axes Dedpfx Aszhlvkjgmock Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Includes option for a large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine will be cleaned, completely overhauled, and tested for all functions after order receipt. Optional: - Commissioning of the machine at your location - On-site training - Cooling unit - Transportation - Clamping device set

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Primus LZ G GS Lead and Draw Spindle Lathe, 3-axis, Heidenhain, Accessories, Very good condition!!! Technical data: >> Year of manufacture 1990, Machine no. 4718 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Brake motor >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, with 4 sets of jaws >> 1 four-jaw chuck, 125 mm, with 2 sets of jaws >> Collet chuck system, collets from 1-20 mm, in 0.5 mm increments >> Spindle stop for collets >> Mulifix size A with 3 steel holders >> 3 drill chucks Dcjdpjzg U Efjfx Agmek >> Coolant system About the machine: Offered for sale is a Weiler Primus GS lead and draw spindle lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are almost as smooth as ground surfaces. Take the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, in TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer: Heidenhain, type iTNC 530 >> Travels X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed rate continuously programmable up to X, Y, Z 20000 mm/min >> C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- and Z-axis 50 m/min >> X-axis 80 m/min (linear drive) >> B-axis 40 rpm >> C-axis 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface Ø 500 x 380 mm >> T-slot spacing 63/14H7 >> Table load 200 kg >> Dimensions and weight: approx. >> Machine without control and attachments >> Depth 3.0 meters, width 2.4 meters, height 2.6 meters >> Weight approx. 7000 kg >> Operating voltage 400 V Dcodpfx Aozg Dnvegmsk >> Electric handwheel Heidenhain HR 410 >> Power connection 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extractor >> IKZ 40 Bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Compressed air supply to the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage detection >> Complete documentation The following work has been carried out: >> Main spindle overhauled >> Complete maintenance: All coolant hoses and pneumatic hoses renewed, filters new, fluids and belts renewed. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance report) About the machine: Offered is a Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain. The machine is in very good condition. The main spindle has been overhauled (replacement spindle) on the DMU, completely serviced, and an acceptance report has been created. Invoices for the overhaul of 42,000 Euros (net) are available. Take the opportunity to inspect and test the machine on site while it is powered up.

Condition: new, Year of construction: 2026, HOLZ-HER Edgebanding Machine ARTEA 1030 - NEW MACHINE Edge thickness, roll material: 0.4 – 3 mm (depending on material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Glue application via Teflon-coated glue application roller, with glue reservoir located underneath. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - LED machine lighting - Edge trimming - Edge feeder - LR101 glue application system - glue application roller (Teflon-coated) - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraping unit - Face scraper - Buffing unit 12 months warranty Delivery time upon request. Delivery, installation, and training for the machine can be arranged directly through us for an additional charge. Dodpfxjzhaw Ao Agmsck In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Weiler Praktikant 160 B lathe with guide and draw spindle, built to toolmaker precision, year of manufacture 2001, with 3-axis digital display K&C NEW, in very good condition, CE compliant. Technical data: >> Year of manufacture 2001, machine no. 4836 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference point, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching of the counting direction >> Quick-change tool holder with collets from 3 to 28 mm, increasing in steps of 1.0 mm >> New 3-jaw chuck 160 mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Coolant system >> Electric spindle guard Dsdpfxozgcnus Agmock >> Machine feet >> Bed stop >> Splash guard >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2001, in very good condition. A very nice lathe with a protective device for the working spindle. The slides all move very easily and smoothly. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display from K&C makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2012 Charmilles Millenium control system Dcsdpfozgt R Hsx Agmsk Travel ranges (X / Y / Z): 550 x 350 x 400 mm Travel ranges (U / V): 550 x 350 mm Max. conical angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg After receiving your order, we will clean and overhaul the machine and test all functions. You will receive a warranty of 6 months on the machine. We would be happy to offer you the commissioning of the machine.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2014 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG-V generator with power module AGIEVISION control system Dcodpfx Agszgt N Asmsk Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and completely overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer you on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Dcedpfx Ajzgt Ixjgmok Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, GF AgieCharmilles FORM 2000 Year of manufacture: 2008 C-frame design, fixed table with lowerable container Travel ranges (X/Y/Z): 400 x 300 x 350 mm Dsdpfxezgt H Ij Agmsck Table-to-spindle distance: 170-520 mm Max. workpiece size: L x W x H = 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and erosion (U = 0-100 RPM) Pneumatic chuck (optional: Erowa/3R Systems) ISPG generator with 60 Amperes Best achievable surface roughness Ra 0.10 µm AGIEVISION 5 control panel 15” LCD color screen, mouse or touchscreen, jog shuttle and hand control Includes CAPA electrode changer - 40 electrode positions - 4 pallet positions Net weight of the machine: 3830 kg Machine dimensions: 1410 x 2460 x 2660 mm The machine will be cleaned, serviced, and tested by us after the order is received. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point Dcjdpfx Aszd Tycogmek >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic 2S Year of manufacture: 2004 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and fully overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. Dsdpfx Agozcaxksmjck We would be happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 1,000 kg, workpiece length (max.): 760 mm, workpiece width (max.): 450 mm, workpiece height (max.): 255 mm, overall weight: 4,000 kg, Wire EDM machine GF AgieCharmilles Spirit 3 Year of manufacture: 2008 Travel ranges (X/Y/Z): 550 x 400 x 350 mm Max. workpiece dimensions: 760 x 450 x 255 mm Max. workpiece weight: 1000 kg Distance table - quill: 170-520 mm Bath level up to 295 mm Includes pneumatic chuck of the 3R system or Erowa ITS 50, selectable Includes 10-position electrode changer in the magazine Max. electrode weight: 50 kg Includes C-axis with U=0-40 RPM Total weight (without dielectric fluid): 3300 kg Dimensions: 2800 x 2800 x 2690 mm After receiving your order, we will clean, service, and test the machine. You will then receive a 6-month warranty on the machine. We would be happy to provide you with free training on the machine at our facility. We would also be pleased to offer you the following additional services and products: - Commissioning - Transport - On-site training Dcjdpfx Aezcawmsgmok - Clamping devices - Dielectric fluid - Cooling unit

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Vertex 3F, Year of manufacture: 2007 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.03 – 0.33 mm (including fine wire module) Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Including AGIEJOGGER handheld control unit for convenient setup Including AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. You will receive a 6-month warranty on this! Includes user training at Techma on your overhauled machine. Optionally, we can also offer you the following services: - Transport - Commissioning - Training Dodpfx Aszcap Aegmeck - Cooler

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Dodpewh Sigefx Agmock Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Dsdpjm Amf Dsfx Agmsck Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Die-sinking EDM machine GF AgieCharmilles Spirit 4 Year of construction 2008 Travel (X/Y/Z): 700 x 500 x 400 mm Max. Workpiece dimensions: 920 x 550 x 370 mm Max. Workpiece weight: 2000 kg Distance table - quill: 215 -615 mm Bath level up to 415 mm Incl. pneumatic chuck 3R-Systems or Erowa ITS 50 of your choice Incl. 28-fold electrode changer Max. Electrode weight: 80 kg Incl. C-axis with U=0-40 rpm Total weight (without dielectric): 4000 kg Dimensions: 3000 x 3000 x 2865 mm The machine is cleaned, serviced and tested by us after receipt of order. We are happy to offer you the following additional services and products: - Commissioning - transportation - training Dcsdpoq N Ap Sjfx Agmsk - Clamping devices - Dielectric - Cooling unit

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2011 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel ranges: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged), 450 kg (non-submerged) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V Generator with Power Module AGIEVISION CNC control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled after receipt of order. A test cut with optimal surface finish is then carried out for acceptance. Dsdoywkuyopfx Agmock You will receive a 6-month warranty for the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles FORM 2000 HP Year of manufacture: 2012 C-frame design, fixed table with lowering tank Travel (X/Y/Z): 400 x 300 x 350 mm Table to quill distance: 170-520 mm Max. workpiece size (L x W x H): 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and EDM (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best attainable surface finish: Ra 0.10 µm Dedpoyniyujfx Agmeck AGIEVISION 5 control interface 15” LCD color screen, mouse or touchscreen, lift keyboard, and manual control unit Including EROWA ERC 80 robot - Electrode changer - Pallet changer Net weight of the machine: 3,830 kg Machine dimensions: 1,410 x 2,460 x 2,660 mm Upon order confirmation, the machine will be cleaned, serviced, and tested by us. Optional: - Commissioning and training - Transportation and installation - Cooling unit - Dielectric fluid

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Dcodpszbbmtefx Agmsk Includes automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be completely cleaned, overhauled, and thoroughly tested. Subsequently, a laser measurement of the axes will be performed at our facility. We would be happy to carry out an individual test on the CUT 3000 for you. Includes operator training at Techma on your overhauled machine. Optionally, we offer you: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, AGIECUT Excellence 2F Year of manufacture: 2002 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface roughness: 0.1 µm Ra Dodpfjzbbndsx Agmsck Max. cutting rate in cylindrical cutting: 300 mm²/min Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER hand box Includes AGIE-Setup 3D After receiving your order, the machine will be cleaned, inspected, and thoroughly tested by our technicians. We would also be happy to offer commissioning and training services.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece weight (max.): 35 kg, travel distance X-axis: 220 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 100 mm, High-precision wire erosion machine GF CUT 1000 Year of manufacture: 2014 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.07 mm to 0.20 mm Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handheld control unit for convenient machine setup 15" LCD color screen with jog shuttle and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg After receiving the order, the machine will be cleaned, completely overhauled, and thoroughly tested by our specialists. Dcjdpfezbbpnox Agmok We would be happy to commission the machine at your location and provide training on the control system and machine operation.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Excellence 3 Year of manufacture: 2001 Dcsdpjyx D I Aofx Agmsk Travel paths: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION control unit AGIE IPG generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional: Transport, commissioning, chiller