Used Schelling Surface Planer for sale (8,206)

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Isdpfx Aju A R D Djcgoau Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 7 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) _____ Max. blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 - Kw 18 Adjustable speed of the saw carriage (m/min) 0 - 160 No. 3 Front supporting tables with Air blowing system Total power (Kw) 35

Condition: excellent (used), O04024) AUTOMATIC BOARD STORAGE SYSTEM for PANELS - SIRIO Total Space Required (with panel saw) mm 10000 x mm 47000 (ca.) Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 150 m/min (ca.) moving carriage speed (on Y axis) 150 m/min (ca.) vacuum suction cup group speed (mobile in Z axis) 60 m/min (ca.) Vacuum suction cup group, 90° rotating Automatic management system (by scanner) of the cut panels (but remaining in the warehouse) O04025) PANEL SAW WITH REAR LIFTING TABLE Mod. FH 6 430 Numerical Control MCS Evolution. Software SIEMENS WinAC RTX Rear pushers (N.) 1 Twin Pusher - DUPLUS2. With No. 12 clamps / grippers Max. cutting width (mm) 4300. Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 135 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 460 / Kw 21 Turning device (rotating unit) at 90° Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system Iaodpfx Acswrz Dbjgeu Total power (Kw) 33 (ca.)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Iajdpfxot Ah Nis Acgju Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: used, functionality: fully functional, Stainless Steel Foam Sprayer V2A, 24L usable volume with 3m compressed air hose - Cleaning and derusting of large surfaces with durable foam - Spray efficiency of 7.3 m² per minute - Operates with up to 8 bar compressed air Iodpfx Aeyvz D Aocgoau Quality Seal Systems Corrosion-resistant stainless steel Tank material: V2A stainless steel Compressed air connection: up to max. 8 bar Pump: max. 8 bar Delivery rate: 90 - 200 ml per minute Sale exclusively to business customers, commercial traders, self-employed professionals, and public institutions—consumer purchases excluded. The unit is pre-owned and sold as-is, with any liability for material defects excluded. The sale is made under exclusion of warranty, guarantee, return, and exchange. Claims for damages due to intentional or fraudulently concealed defects, injury to life, body, or health, and in cases of gross negligence or intentional misconduct are excepted.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Ijdpfx Aeyufixocgsau Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. Iedpfjwqg Iiox Acgeau The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: ready for operation (used), Year of construction: 2005, Panel saw manufactured in 2005. This SCHELLING FM-H 430 features a feed speed of up to 25 m/min and a saw feed speed of up to 120 m/min. It is equipped with a powerful saw motor of 19 kW and a clamp opening of 113 mm. If you are looking to get high-quality cutting capabilities, consider the SCHELLING FM-H 430 panel saw we have for sale. Contact us for further details. • Feed speed: forward 0–25 m/min, reverse 80 m/min • Saw feed speed: forward up to 120 m/min, reverse 120 m/min • Saw motor: up to 19 kW at 2930 rpm, 50 Hz • Scoring motor: 1.5 kW at 2830 rpm, 50 Hz • Clamp opening: 113 mm • Cutting straightness: ±0.1 mm over a 3 m cutting length • Dimensional accuracy: ±0.2 mm length, ±0.2 mm width, ±0.3 mm diagonal • Main saw blade: diameter 450 mm; bore 30 mm; thickness 4.4 mm; 72 teeth • Scoring blade: diameter 200 mm; bore 20 mm; thickness 4.2 / 3.5 mm; 36 teeth Iedpsyn I Tasfx Acgeau • Edge scoring blade: diameter 220 mm; bore 20 mm; thickness 4 / 4.8 mm; 2 × 24 teeth

Condition: ready for operation (used), Year of construction: 1995, This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details. • Technical data: • Main saw blade diameter: 400 mm • Scoring saw blade diameter: 200 mm • Max. saw blade projection: 80 mm • Max. clamp opening: 100 mm • Max. stack height: 60 mm • Main motor power (50/60 Hz): 15 / 18 kW • Saw unit feed speed: 0.2 – 22 m/min • Saw unit return speed: 22 m/min • Forward feed speed: 10 m/min • Backward feed speed: 10 m/min • Working height: 930 mm • Performance and requirements: • Processable materials: Acrylic, glass-fiber reinforced plastic (GFRP) • Max. panel length: 3000 mm • Max. panel width: 2200 mm • Max. thickness (Acrylic): 80 mm • Max. thickness (GFRP): 60 mm • Edges: deburred • Panel flatness: max. wave 5 mm • Thickness tolerance: ±0.2 mm • Electrical power consumption: approx. 25 kW • Supply voltage: 380 V / 50 Hz • Compressed air requirement: approx. 100 l/min (6 bar) • Extraction requirement: approx. 4000 m³/h (air speed 32 m/s) • Equipment (included with the machine): • Scoring unit • Servo-driven feed (0 – 40 m/min) • Side guides on roller table, automatic adjustment; adjustment range 80 – 2200 mm Iedpfx Acoyhqlrjgjau • Safety light curtain with separate support frame • Hold-down clamps (according to machine configuration) • Cooling and spraying system • Computer control – COMMANDER (PLC/SPS) with display, membrane keyboard, diagnostic system • Graphical display of cutting plans • Electrical cabinet and control integrated in the machine • Slow scoring / pre-cut function

Condition: ready for operation (used), Year of construction: 2011, A panel storage system including a saw is available. 1) Surface storage Becker, year of manufacture: 2011, length: 24900mm, width: 14170mm, stack height: 2000mm, lifting height: 2100mm, max. panel dimensions X/Y: 4200mm/2100mm, min. panel dimensions X/Y: 1800mm/600mm, max. lifting weight: 250kg, travel speed horizontal/vertical: 120m/min/40m/min, stack positions: 38, panel capacity at 20mm panel thickness: approx. 3400pieces. Including saw linkage, offcut handling with automatic measurement and separation device. 2) Panel sizing saw Schelling fh 4, year of manufacture: 2011, max. panel dimensions X/Y: 4100mm/2100mm, max. panel thickness: 60mm, thickness tolerance: 0.2mm, max. saw blade diameter: 350mm, cutting length: 4200mm, feed speed: 80m/min. Including storage linkage, lifting and lowering device, central cleaning system, infeed and outfeed systems and further accessories. This is a complete and connected system, including control system, software and optimization connections. Documentation available. An on-site inspection is possible. Expected to be available August 2026. Iedpeyrtagefx Acgoau

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 241.371, functionality: fully functional, operating hours: 4,700 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 46 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 5,800 mm, saw blade diameter: 350 mm, saw blade bore: 30 mm, total length: 7,300 mm, total width: 7,600 mm, table height: 970 mm, year of last overhaul: 2025, plate length: 7,300 mm, platform width: 5,800 mm, Equipment: CE marking, documentation/manual, scorer, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction capacity: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length for saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Saw blade projection above table (U): max. 95 mm Maximum clamp opening (K): 90 mm Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm Minimum alignment force of strip aligner: 400 N / unit Maximum alignment force of strip aligner: 2000 N / unit Working height, longitudinal saw: 970 mm Overall height: 2070 mm Main saw motor power: 15 kW Iaedpfx Acsytfxwjgeu Saw unit feed speed, forward: 5 to 120 m/min Saw unit feed speed, return: 120 m/min Return feed speed – longitudinal saw: up to 80 m/min

Year of construction: 2016, condition: good (used), functionality: fully functional, Storage System Machine Designation Iajdpfx Ajxdtv Rjcgsu Vacuum Stacking Device Machine Number: 150.138 Type: VS 16 Length of Carrier Track (Travel Path): 28.5 m Bridge Span (Travel Path): 16 m Overall Height: 3600 mm Clearance Height: 2700 mm Maximum Stacking Height (incl. supports): 2000 mm Stack Gap: 100 mm Positioning Accuracy: ±5 mm Support Height: 60 mm Input Stack Height: 1900 mm Length Adjustment Vacuum Load Handling Length: 2000 – 4200 mm Vacuum Suction Capacity: 2 x 40 m³/h Table: Panel Sizes for laminated chipboard, laminated MDF boards, laminated HDF boards, solid wood and composite panels, blockboards, honeycomb panels Length: 1250 - 4100 mm Width: 330 - 2100 mm Thickness: 4 - 100 mm

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003585 - Manufacturer Code: 205367 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, please contact us. 1KG - 20X20X20 Isdpfx Acjyrn Ufjgoau

Condition: used, Year of construction: 2003, TECHNICAL DATA SHEET 1. General Information Manufacturer: SCHELLING Anlagenbau GmbH Country of Origin: Austria Machine Type / Model: FX-H 430 / 400 Machine Number (Serial No.): 220.047 Year of Manufacture: 2003 Machine Condition: Used / Second-hand 2. Application Primary Application: Plywood cutting Material Type: Plywood sheets and wood-based panels Cutting Type: Straight panel cutting, industrial panel sizing 3. Electrical Specifications Supply Voltage: 400 V Frequency: 50 Hz Phase: 3-phase (3~) Rated Current: 40 A Installed Power: 21 kW 4. Mechanical / Functional Characteristics Machine Category: Industrial cutting machine Construction: Heavy-duty industrial steel frame Drive System: Electric motor-driven cutting unit Control System: Siemens components (to be confirmed) 5. Safety & Compliance Iaedpfxsydimae Acgsu CE Conformity: Applicable (documentation to be confirmed) Safety Features: Emergency stop, protective guards

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine Ijdoxqzmkopfx Acgsau CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: not inspected (used), Year of construction: 1993, power: 11 kW (14.96 HP), cutting width (max.): 4,300 mm, saw blade diameter: 400 mm, cutting length (max.): 4,260 mm, cutting height with scoring (max.): 105 mm, Equipment: scorer, Machine including Laweco conveyor lines with lifting device, load capacity 5,000 kg, platform size 4,100x2,100 mm. The machine comes from a company liquidation. Iedpfxox Iuzxe Acgoau

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Iaedeu Au I Topfx Acgeu Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 220.242, functionality: fully functional, saw blade diameter: 350 mm, cutting length (max.): 4,300 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Iajdpfx Acsx Sqpmegeu Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Iodpfx Aoi Apuhocgsau Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Surface Shields SC300XL 200 pcs Shoe Covers. Iajdpfx Ajvxvlzecgsu Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Iedpfx Asx Ebzdecgjau Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: used, Lumsden 93 ML Vertical Spindle Rotary surface Grinding Machine, fitted with 60 inch dia magnetic chuck. Auto sizing. Table Guards, Coolant tank, with pump. Serial Number 93ML 60/11616. Option to be supplied with updated electrical controls, please contact for more details. Under power ready for immediate supply. approx machine dimensions; 3200mm (includes counterbalance) x 3400mm (includes electrical cabinet positioned to rear) x 3050mm (high), coolant tank with pump 1600mm x 800mm x 800mm. Iedpfxsy N Ults Acgjau

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, The Wattsan 100W is a brand-new portable laser metal cleaning machine. This model has 1 mirror and 1 seam type. Due to its air cooling system, the machine is quite small in size. It’s quiet, fast and easy to use. Iedor Hbwkspfx Acgeau It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scales, carbon deposits, etc. from metal items. This portable machine can also clean adhesive and galvanised materials as well as plaster and stone products. Thanks to pulse cleaning, this machine can clean thick layers of rust, paint, petroleum products, oxide films, scale and carbon deposits from metals without heating or damaging it. You can give our managers a call for additional details! Wattsan Cleaning 100 W machine characteristics: Cooling: Air Laser power: 100 W Machine size: 750x600x680 mm Laser source: JPT Weight: 46 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, The Wattsan 200W is a brand-new portable laser metal cleaning machine. Due to its air cooling system, the machine is quite small in size. It’s quiet, fast and easy to use even for a begginer. Iaedper Hbx Tsfx Acgou It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scales, carbon deposits, etc. from metal items. This portable machine can also clean adhesive and galvanised materials as well as plaster and stone products. Thanks to pulse cleaning, this machine can clean thick layers of rust, paint, petroleum products, oxide films, scale and carbon deposits from metals without heating or damaging it. You can give our managers a call for additional details! Wattsan Cleaning 200 W machine characteristics: Cooling: Air Laser power: 200 W Machine size: 750x600x680 mm Laser source: JPT Weight: 46 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Ease up your production with a Wattsan CW cleaning machine, continuous and with water-cooling. It can remove rust, paintwork, oil products, oxide coatings, welding scales, and carbon deposits from a variety of metals. This model features 1 type of cleaning seam. There are no consumables and no need for a significant amount of necessary space. Compact, portable laser cleaner that can work at any angle and in the most inaccessible places. The chiller is also built-in. The fiber length is 8 meters. The laser gun is lightweight and comfortable for long-term use. You can give our managers a call for additional details! Wattsan CW Cleaning machine characteristics: Cooling: water Laser power: 1000-3000 W Iaedsiicgkjpfx Acgsu Machine size: 880*560*1010 mm Laser source: JPT / Raycus Weight: 145 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2010016, functionality: fully functional, planing width: 300 mm, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 9 units Spindle 1 (bottom) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 2 (right) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 3 (left) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 4 (top) Motor power: 15 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 5 (right) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 6 (left) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 7 (top) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Spindle 8 (bottom) Motor power: 15 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 9 (universal) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Min. planing width: 20 mm Max. planing width: 300 mm Min. planing height: 10 mm Max. planing height: 200 mm Min. feed rate: 6 m/min Max. feed rate: 36 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 7,100 x 2,200 x 1,900 mm Empty weight: 12,000 kg Transport packages: 1 unit EQUIPMENT Isdpjzdy Tpsfx Acgoau CE marking CE certificate User manual Operating system Technical data Electrical wiring diagrams Tool for spindles 1-6, 8, 9