Used Scm 900 Rt for sale (10,170)

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back Chedocnxa Sepfx Ac Dja 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm Chjdpfx Aohp Rc Iec Dea

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Chodpjff Hdpjfx Ac Dea Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds Csdpfxecnxa Ne Ac Doha for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2025, Description Technical Data Scope of Supply Accessories Equipment Options Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables allow for easy planing of workpieces. The work tables are made of cast iron, making them durable and ensuring they remain perfectly flat. Planing tables that open simultaneously towards the rear, with spring-assisted support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, there is no need to change the dust extraction hose during adjustments, saving valuable working time. The helically toothed steel infeed roller ensures constant and uniform wood feed. The rubber outfeed roller at the end of the thicknesser ensures uniform wood discharge. Material feed with four speeds. Planer/thicknesser table adjustment via handwheel with integrated display for planer height. On/off switch in operator position. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising attachment. Quality – Made in Italy. Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Chip removal, max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter, thicknesser 1 x 120 mm Drive power Main motor 7 kW Installation Information Space required, length 2250 mm Space required, width/depth 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thickener Thickening table length 520 mm Thickening table width 850 mm Working height, min. 3 mm Codpfxjff Hdms Ac Djha Working height, max. 240 mm Working length, min. 220 mm Chip removal, max. 5 mm Electrical Data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min⁻¹ Planer width, max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Cjdpfx Asdqzcxsc Djha Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Rapid belt tensioning via lever Upper belt support with graphite coating 250 mm diameter weighted belt pulleys ensure optimal drive. With electric height adjustment With dust extraction and noise reduction features With noise reduction certificate With two speeds Adapts to surfaces through a pivoting sanding shoe For processing beveled surfaces Standard with right and left rotation The rapid belt tensioning enables quick and easy changing of the sanding belts. Delivered partially assembled Dimensions and weights Length approx. 4540 mm Width/Depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Dust extraction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm Working width max. on table 900 mm Electrical data Power of height adjustment motor 0.37 kW Power of dust extraction motor 0.75 kW Power of drive motor 3.3 / 4.5 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s Sanding shoe length 360 mm Sanding shoe width 150 mm Chjdpfx Aoff Hdbsc Dsa Workpiece Height max. 590 mm Height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table: Processing of the workpiece with an overhang to the right over the work table is possible.

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Cedjy Ehcdspfx Ac Doha Location: ex-stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Table saw/router combination minimax tw 45c With aluminum sliding table and pivoting router spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights Net weight approx. 290 kg Chjdpfxshp Rcys Ac Dja Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1000 mm, Sliding table length 1000 mm Work table width 435 mm, Sliding table width 270 mm Table height 900 mm Installation information Space requirement length 1945 mm, Machine body width/depth 710 mm Space requirement width/depth 2220 mm, Working area length 1600 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm, Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400V, Power of drive motor 5.0 kW Mains frequency 50Hz Router spindle Spindle inclination 0 to -45°, Spindle speed 3500/7000/10000 min⁻¹ Usable length of the spindle 100 mm, Spindle arbor diameter 30 mm Maximum spindle overhang above the table 130 mm Maximum router tool diameter Maximum tool diameter, plunge-cut 180 mm, Maximum tool diameter, mortising cutters 275 mm Maximum tool diameter, profile cutters 210 mm DELIVERY SCOPE Arched router guard Anodized aluminum sliding table Telescopic miter fence Aluminum fence cheek

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to the precision unit and the heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed rate Satin-finished steel outfeed roller, optionally with a rubber roller in the outfeed The work table is mounted on four large columns, ensuring maximum stability under all working conditions. The thickness table adjustment is done via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard with two feed speeds, comfortably selectable from the operator's side Chodpfx Asd Hx Hnjc Dsa Powerful industrial motor Stable steel and cast iron construction Equipment details: Work table Mounted on four large spindles, which ensure maximum stability under all working conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing Planer knife change in seconds Self-locking Particularly quiet Thickness table adjustment on S 41 elite s via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Dimensions and weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Dust extraction nozzle diameter for thicknessing 120 mm Drive power Main motor 5 kW Installation information Space requirement Length 1070 mm Space requirement Width/Depth 900 mm Space requirement Height 1100 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body Length 1040 mm Machine body Width/Depth 900 mm Length 3000 mm Width 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thickness table Length 423 mm Thickness table Width 775 mm Working height min. 3 mm Working height max. 240 mm Working length min. 180 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 95 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 410 mm Feed Speed 6/12 m/min

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Chodpfx Acedqzh Rs Dsa Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Chodpfx Acjxw N Sbo Dea Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Csdpfsgf Sw Nsx Ac Deha Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision drive unit and heavy cast iron construction Front steel infeed roller with helical teeth for optimal feed rate Satin-finished steel outfeed roller, optionally with rubber roller on the outfeed side The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment is carried out via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard equipment includes two feed speeds, conveniently selectable from the operator's front Powerful industrial motor Stable steel/cast iron construction Equipment details: Worktable Mounted on four large spindles, ensuring maximum stability under all operating conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing required Planer knife changes in seconds Self-locking Chodpfx Aod Hx Hpec Dsa Motorized thickness table height adjustment in S 52 elite s Motorized height adjustment of the thickness table with electronic decimal display For greater precision and user-friendliness Dimensions and weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Dust extraction nozzle diameter (thicknessing) 120 mm Drive power Main motor 7 kW Installation information Space required (length) 1440 mm Space required (width/depth) 1071 mm Space required (height) 1088 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation of work area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Thicknessing Thickness table length 520 mm Thickness table width 850 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm Cjdpfxszl Hbio Ac Dsha - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Cjdswwl Nlopfx Ac Djha Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 Chsdpfszmfg Tox Ac Dja SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Cedpszl Ap Nofx Ac Djha

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Cedpfjhvagkex Ac Deha Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: excellent (used), CATALOGUE NUMBER: 6582 TECHNICAL DATA - max. width of workpiece: 920 mm Chsdpfx Aezcmqtjc Doa - max. height of workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW From above: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers From below: - 3 slip rubber rollers - conveyor belt - pneumatic tape oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg – German made – 2 units – used grinder, very good condition Net price: 24,900 PLN Net price: 5,929 EUR Net price calculated according to the exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2004, WENZEL SCM 500 Smart Coordinate Measuring Machine in well-maintained and fully functional condition. The machine features a robust and compact design, specifically engineered for flexible use directly in the production environment or inside the measuring room. Combined with high-precision guideways, this proven structure ensures excellent measuring accuracy, stability, and outstanding repeatability within a minimal footprint. The SCM 500 Smart is designed for reliable, fast deployment in quality assurance as well as near-line series production, delivering consistent measuring results even under demanding shop-floor conditions. Prior to delivery, the machine will be fully inspected and subjected to a test run by our service technicians in Remscheid to guarantee complete functionality. The system is currently powered up and can be inspected and demonstrated at any time. PC System & Operating System (Upgraded): The machine is already equipped with a modern, high-performance PC system running the latest Windows 11 operating system. The entire configuration meets the current requirements of WENZEL, has been comprehensively tested, and operates with absolute stability, ensuring the CMM is immediately ready for integration into your processes. Chodpfx Aszkug Rjc Dja Optional Services (Subject to Agreement): - Installation and commissioning of the measuring machine within NRW (North Rhine-Westphalia) - Generation of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Determination of probing uncertainty in accordance with DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training courses for the WM | Quartis measuring software - Contract programming for your components Additional Information: Upon request, the machine can be retrofitted with a suitable Renishaw probe system (e.g., PH10 or other upgrade options). The retrofit includes additional services as well as supplementary hardware components, which will adjust the purchase price accordingly. Further software modules, customizations, individual accessories, and clamping systems are available upon request – perfectly matched to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 450 Measuring range Z: 400 mm Measurement uncertainty: Eo = 8,0 + L/250 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2030 PC System: Windows 11 Probing system: TP20 Probe head: PH6 Probe module: 1 × TP20 Standard Force Module Joystick: HT400 Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck

Condition: used, Year of construction: 2000, Used machine Year of manufacture 2000 special SCM guide system of the saw carriage. The arc-shaped arrangement between balls and running guides as well as the hardened contact surfaces ensure exceptional and constant precision the scorer can be swivelled in and out from outside without any problem; a special plate enables precise positioning the fence is extremely robust and can be used for both rip cuts and angle cuts; fast return to the initial position. The precise flip stops enable a direct reading of the dimensions over the entire length Table dimensions 830 x 1200 mm Cedpfx Aszlbr Aec Doha Saw carriage 1500 x 290 mm Cutting length 1500 mm Tilt of the saw blade 45° max. diameter main saw blade 300 mm max. diameter scoring saw blade 100 mm max. cutting height 90° = 95 mm max. cutting height 45° = 67 mm Saw blade speed 4000 rpm Scoring saw speed 8000 rpm Cutting width with parallel guide 1000 mm Diameter extraction port 100 mm Motor 4 kW Weight: 425 kg Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Catalog number: 6368 TECHNICAL DATA - max. width of the workpiece: 230mm - max. height of the workpiece: 130mm 7 spindles: 1) horizontal, lower: 230mm, 5.5kW 2) vertical, right: 130mm, 5.5kW 3) vertical, left: 130mm, 5.5kW 4) horizontal, upper: 230mm, 7.5kW 5) horizontal, upper: 230mm, 11kW 6) horizontal, lower: 230mm, 18.5kW 7) universal: 230mm, adjustable at an angle of 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter: 40mm - spindles 4 and 5 adjustable electrically up/down - top: 8 feed rollers, metal, twisting, including 2 double rollers - top: 4 feed rollers, rubber - top: 2 pressure rollers - bottom: pawls - bottom, side: 3 pressure rollers Cedpfjzlr Dvex Ac Djha - bottom: 2 metal feed rollers, smooth - bottom: 2 double feed rollers, rubber - rollers are pneumatically pressed - feed on Cardan shafts - stepless feed speed adjustment: 5-36 m/min - feed motor: 4kW - electric adjustment of planing thickness: 0.75kW - length of the infeed table: 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction port diameters: 5x120mm, 2x150mm - dimensions (L/W/H): 5500x1840x1900mm - weight: approx. 5000kg ADVANTAGES - Made in Italy - With 7 heads - For wet and dry wood - Last spindle is universal - Unpainted - Used planer, very good condition Net price: 116,900 PLN Net price: 27,830 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: good (used), Code: 0400 Brand: SCM GENIUS Model: M 10/SI Universal 6-works combined machine with 3 motors for woodworking, joinery, furniture, custom-made furniture , window and door frames, doors and various Specifications: Three-phase motors V.380/50 Surface planer: Total table length 1400 mm Cjdpezbu Azefx Ac Djha Table width 300 mm N° 3 blades Motor Hp 3 Thickness planer: Max planing width 300 mm Max planing thickness 150 mm Feed speed 7 mt/min Table lifting by handwheel Circular saw: Max blade diameter 250 mm Hole 20 Max cutting height 85 mm Max cutting width 700 mm Blade tilt 0–45° Motor 2 Hp Panel saw: Flag-type sliding carriage mounted on a movable bar Spindle moulder: Spindle diameter 30 mm Vertical stroke 120 mm Spindle speed 3000/4500/6000/7500 rpm Max tool diameter 150 mm Max spindle projection over table 100 mm Motor 2 Hp Mortising machine: Table dimensions mm 200 x 400 Spindle 0–16 mm Longitudinal stroke 150 mm Transverse stroke 90 mm Vertical adjustment by handwheel Overall dimensions of assembled machine mm 2000 x 1400 x 860 h Weight kg 450

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: AB141760, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting width (max.): 1,500 mm, cutting width at rip fence: 1,500 mm, sliding table length: 3,200 mm, Equipment: scorer, SCM sliding table saw, model SI 400 E Connected load 380V Main motor 7,5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram guard with wide and narrow hood Cedpfx Aetwp Epjc Djha Scoring unit manual adjustment electric height adjustment electric swivel with siko display Suction connection 1x100mm 1x120mm