Used Simat Electric Cnc Machine for sale (86,291)

Condition: used, Year of construction: 1996, functionality: fully functional, type of input current: three-phase, power: 15 kW (20.39 HP), input current: 22 A, input frequency: 50 Hz, input voltage: 400 V, We are offering this used Walter Helitronic Power with HMC400, manufactured in 1996. The machine is fully functional, still connected to power, and can be inspected at any time. It is being sold due to the purchase of a new machine and must be collected by June 30th. A video can be sent upon request. Isdpfxozcbtcj Anweau Manufacturer: Walter AG Type: Helitronic Power Year of Manufacture: 1996 Serial Number: 6473 Operating Voltage: 400 V Operating Voltage Frequency: 50 Hz Phases: 3~ Control Voltage DC: 24 V Lamp Voltage: 230 V Lamp Voltage Frequency: 50 Hz Rated Current: 22 A Current of Largest Consumer: 10 A Connected Load: 15 kVA Wiring Diagram No.: HE6473-K If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 16i-MB, overall weight: 1,700 kg, spindle speed (min.): 500 rpm, spindle speed (max.): 30,000 rpm, spindle motor power: 10,000 W, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, input current: 25 A, CNC Machining center WILLEMIN W 408MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control: FANUC 16i-MB Number of axes: 5 Stroke X axis: 250 [mm] Stroke Y axis: 200 [mm] Stroke Z axis: 300 [mm] Feed rate on X, Y and Z axes: 30000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 6000 [rpm] Main spindle max. power: 3.7 [kW] Angular C axis stroke: 360 [°] B axis swivelling stroke: 115 [°] Spindle type: HSK-E40 Min. spindle speed: 500 [rpm] Max. spindle speed: 30000 [rpm] Spindle power: 10 [kW] Tool changer magazin number of stations: 48 Max. tool lenght: 95 [mm] Iodjzcx Dfepfx Anwsau Max. tool diameter: 63 [mm] Lubrication tank capacity: 80 [l] Collant pump flow rate: 40 [l/min] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 1700 [Kg] More information upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light Iasdpfx Ansvupa Roweu - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled crosscut saw with laser switching between saw cutting and zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/synchronous profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle), D = 40 x 40 mm, axially indexed, 3 kW motor Ijdpfx Anoxmr N Iowjau 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on the right side, 3 kW motor Hardware spindle 40 x 150 mm, 3 kW motor Adjustable feed speed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop, 3600 mm Workpiece return system with automatic rotating mechanism Automation package Interval-controlled sash support Double parts package Laminated fabric tables (for sanded surfaces) Pressure guide on the left, max. wood width difference 100 mm Machine in very good technical and visual condition

Condition: used, Year of construction: 2013, Machine design: Throughfeed Processing size in X direction: 1000 mm Processing size in Y direction: unlimited mm Processing thickness (Z dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 3.3 kW Tool changer: No tool changer Rear wall groove units: fixed in Y direction Vertical drilling spindles - in X direction: 5 units Vertical drilling spindles - in Y direction: 5 units Spindle speed, vertical drilling spindle: 4000 rpm Horizontal drilling spindle in X direction: 2 double spindles Horizontal drilling spindle in Y direction: 1 double spindle Spindle speed, horizontal drilling spindle: 4000 rpm Monitor size: 17" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: Masterwork Iedpfjx Urniox Anwsau DXF interface: Yes Online connectivity possible: Yes CD-ROM drive: Yes Table version: fixed table with rollers Weight approx.: 1300 kg Dimensions: 2,200 x 2,470 x 1,590 mm Location: Customer site

Condition: used, Year of construction: 2023, New demonstration machine! List price: €86,567 net Base machine complete in standard configuration for drilling and grooving: For detailed technical data, please refer to the ProTec Type 0571 data sheet. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed modemax. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holders HSK63F with collet chuck 462E/OZ25, cutter length up to 130 mm. Information: Machining unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Network TN or TT Pneumatic connection 7 bar (102 psi). At the machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory-supplied. For the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, inner hose diameter 12 mm (min.). Compressed air consumption continuous operating air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection 3x extraction outlets dia. 80 mm. Extraction air velocity 30 m/sec - measured at the extraction outlet. Extraction requirement min. approx. 2500 m3/h. Machine weight approx. 1650 kg (with options!). Machine installation area: In general, a ProTec fix can be bolted to the floor. A concrete floor (or foundation) is required (at least at the four machine corners/feet). Equipment: Protec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm. Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device with lamella curtain. Prerequisite for horizontal routing for Lamello P-System (without Lamello P-System tools). Drill bit set for Protec shank ø 10 mm with clamping surface (JSO) 1 HW-roof tip drill bit 5x70mm (NL 35mm), LH # 30566-5-05035-L 3 HW-dowel drill bits 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW-dowel drill bits 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW-dowel drill bits 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW-dowel drill bits 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW-dowel drill bits 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW-cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW-cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW-cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW-grooving cutter ø 125/30 mm groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm 3.00 pcs Indexable insert shank cutter Z1+1 1.00 pc HW with indexable insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert drill tip, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separat Iedpfxow Tfzfj Anwsau

Condition: used, Year of construction: 2019, Machine design: Throughfeed/Return feed Iedpfx Aeymp N Tonwsau Working area in X-direction: 1300 mm Working area in Y-direction: 5600 mm Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Main spindle power: 5.5 kW Main spindle speed: 1000-20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change stations: 3 Back wall grooving units: fixed in Y-direction Vertical drilling spindles - in X-direction: 3 Vertical drilling spindles - in Y-direction: 10 Horizontal drilling spindle in X-direction: 2 Horizontal drilling spindle in Y-direction: 6 Control system: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Online connection possible: Yes Table design: fixed, smooth table Central lubrication: automatic Tools: various tools Operating hours: 920 hours Weight approx.: 1800 kg Extraction diameter: 3x80 mm Machine was modernized in the factory; pressure bar and control technology from model 0572! Storage location: Customer

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,500 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, coolant supply: 15 bar, spindle motor power: 33,000 W, controller manufacturer: HEIDENHAIN, controller model: 430 CA, power: 0.033 kW (0.04 HP), Equipment: rotational speed infinitely variable, ANAYAK HVM 9000 – CNC moving column milling machine | 8300 mm x travel | Fully overhauled High-capacity CNC bed milling machine with moving column, reconditioned in workshop. Perfect for heavy-duty machining of large components with precision and reliability. 🛠 Key technical specifications: • X-axis travel: 8300 mm • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle power: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Tool changer: 30 positions • Automatic axes: B and C • CNC Control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Full retrofit includes: • Regrinding and geometry adjustment of Y and column guides • Complete head overhaul: new bearings, seals, gears • Full electrical cabinet update under CE compliance • New telescopic covers, drag chains, and motor wiring • Machine tested and delivered with full documentation ✅ Ideal for: Iajdpfxoqpd D Is Anwou • Large-scale component machining • Energy, wind, and railway industries • Mold making, aerospace structures, and shipbuilding 📌 Ready for immediate delivery. Power, scale, and accuracy in one robust CNC machine.

Year of construction: 2017, condition: ready for operation (used), X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening width: 1055mm, foundation/installation area: 1520x2080mm, weight: 2.8t. An on site inspection is possible. Iodpezcfk Eefx Anwoau

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: CE marking, documentation/manual, CNC NESTING SCM PRATIX S22-31B with AUTOMATIC UNLOADING TECHNICAL FEATURES • Moving gantry, with Bumper safety system • 3 controlled axes: X, Y, and Z • Travel speed on the axes: X: 35 m/min Y: 35 m/min Z: 15 m/min • Usable working area in X: 3,086 mm • Usable working area in Y: 2,155 mm • Usable working area in Z: 150 mm • PRO-SPACE safety system. With this system, the machine does not require perimeter guards or safety mats; the operator has free access to the work area from any side. • MATRIX aluminum table, 2,220 mm x 3,150 mm • 16 retractable pneumatic stops on the table (6+6 in Y and 4+4 in X) • 8 MPS 130x130 mm suction cups, H=25 mm • 4 MPS 150x50 mm suction cups, H=25 mm • SCM TECPAD remote control with digital display, with its corresponding resting base • Lubrication of the guides by means of a centralized drive pump • 2 vacuum pumps of 250 m3/h each, located under the machine structure • Xilog-Plus control software Iedjzav Hxepfx Anwjau • Maestro Nesting software. Rectangular nesting • DXF file import • Pusher for evacuating finished parts, with vacuum cleaning system • Motorized belt table for material unloading, with photocells to read parts at the end. 3,200 mm x 2,180 mm • CE COMPLIANCE • Machine in excellent condition. Year of manufacture: 2014 • Supplied with the instruction manual, machine exploded view diagram, and electrical diagram. OPERATIONAL GROUPS: ROUTER • Electro-spindle power: 6.6 kW / 9 HP. 0 - 24,000 rpm • Air blowers • Mount that allows for the attachment of a horizontal tool • Linear tool changer, TR13 model, with 13 positions • ATC for HSK F63 tool holders • Calibration sensor to automatically measure tool length MULTIPLE DRILLING UNIT • 7 vertical drill holders • 1+1 horizontal drill holders in the X direction • 1+1 horizontal drill holders in the Y direction • 1 vertical disc in the X direction

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 150, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Iodpspcf D Iofx Anwoau

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, rotational speed (max.): 20,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Iaodpfxezbqy Ne Anwou Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Custom modifications deviating from the standard model that were carried out for us: Iedpjy Nmmijfx Anwsau 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. If you have any questions or require more information, please feel free to send us a message or call us.

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible. Iaodpfx Anjzb Nlwowju

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Iedpozcmz Eofx Anwoau Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm

Condition: used, Mecof CNC Bed Type Milling Machine x 9000mm Key Specifications Manufacturer Mecof Condition Used Stock Number 00265 Table Size 9000 mm × 2200 mm X-Axis Travel 7200 mm Y-Axis Travel 1008 mm Iedoy N Amxspfx Anwsau Z-Axis Travel 2040 mm Universal Head Heidenhain TNC 426 CNC Control Hand Wheel

Condition: good (used), Year of construction: 1997, functionality: fully functional, input current: 50 A, number of axes: 3, number of slots in tool magazine: 12, total length: 5,000 mm, total width: 2,900 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, CNC milling machine with a tool magazine for 12 tools, featuring a vacuum clamping system to secure the workpiece, and includes a vacuum pump. Isdpeza U Nxjfx Anwjau

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Iaodpsza Egnefx Anwou Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, laser power: 4,400 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, with ByLaser 4400 with turning axis ByVision cnc control with changing table Technische Daten / technical details: Blech-Nennmass X, Y / sheet nominal size X, Y 3000, 1500 mm Schneidbereich X, Y / cutting range X, Y 3048, 1524 mm Hub Schneidkopf Z / stroke cutting head Z 170 mm Drehachse: / turning axis: Profilaufnahme Spannfutter / profile taper clamping chuck 15-315 mm Profilzuführung durch das Spannfutter / profile feed through the clamping chuck 15-155 mm max. Profilbearbeitungslänge / max. profile working length 2700 mm Laserleistung / laser capacity 4,4 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Ijdpfjy N Rgmox Anweau Gewicht ca. / weight ca. 13500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Iaodpfx Anjzbvqgowju Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Ijdpfsygn Ibsx Anwjau Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Isdpfx Aneyq Nyyjwjau Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: reconditioned (used), Year of construction: 2016, operating hours: 9,701 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: series 31i-B5, overall weight: 3,300 kg, spindle speed (max.): 42,000 rpm, spindle nose: A2-4", number of spindles: 2, number of slots in tool magazine: 72, tool length: 150 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC machining centre WILLEMIN MACODEL W508MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2016 CNC control: FANUC series 31i-B5 Iaodpfxjy Uwp Ee Anwju Number of simultaneous axes: 5 Stroke X axis: 450 [mm] Stroke Y axis: 200 [mm] Stroke Z axis: 425 [mm] Traversing feeds X, Y and Z axes: 40000 [mm/min] Axes acceleration: 10 [m/s²] Max. bar diameter in turning spindle: 42 [mm] Main spindle max. speed: 6000 [rpm] Main spindle max. power: 7.5 [kW] Angular A axis stroke: 360 [°] Resolution A axis: 0.001 [°] Drive A axis: Torque-motor Spindle taper A axis: A2-4" B axis swivelling stroke: -15 [°] / +100 [°] Resolution B axis: 0.001 [°] Drive B axis: Torque-motor Spindle type: HSK-E40 Max. spindle speed: 42000 [rpm] Tool changer magazin number of stations: 72 Max. tool lenght: 150 [mm] Max. tool diameter: 80 [mm] Tool change time: 1 [sec] Chip to chip time: 3 [sec] Lubrication tank capacity: 150 [l] Collant pump flow rate: 60 [l/min] Rated current: 50 [A] Total power required: 35 [kVA] Supply voltage: 400 [V] Working hours: 9701 [h] Machine weight: 3300 [Kg] INCLUDED EQUIPMENT: x1 Back working unit with integrated 3-position turret on linear slide x1 Vise on back working unit x1 Counter-spindle on back working unit x1 42,000 rpm spindle with air/oil lubrication x1 RENISHAW OMP40-2 part probe x1 BLUM LaserControl NT laser measuring system for tool setting and tool monitoring x1 DETECTOR FRANCE type 202 tool breakage detection device x1 A2-4" collet chuck Set of 58 HSK-E40 tool holders x1 Self-tightening drill chuck LNS Super Hydrobar bar feeder, type 6.42 HS 3.2 Various equipment for LNS Super Hydrobar bar feeder Set of technical manuals x1 parameter backup system Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, including CNC milling, drilling, and tapping machines, as well as CNC grinding machines.

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Ijdex Nf Tbopfx Anwjau Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: reconditioned (used), Year of construction: 2019, operating hours: 2,354 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: MAZATROL Smooth, workpiece weight (max.): 2,500 kg, total height: 3,419 mm, total length: 5,250 mm, total width: 4,300 mm, table width: 820 mm, table length: 3,500 mm, overall weight: 16,800 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 48, tool length: 350 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, CNC Machining centre MAZAK VTC 800 30SR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 CNC control: MAZATROL Smooth Number of simultaneous axes: 5 Stroke X axis: 3000 [mm] Stroke Y axis: 800 [mm] Stroke Z axis: 720 [mm] Feed rate on X, Y and Z axes: 50000 [mm/min] Traversing feeds X, Y and Z axes: 50000 [mm/min] Min. distance spindle nose / table: 140 [mm] Max. distance spindle nose / table: 860 [mm] Table length: 3500 [mm] Table width: 820 [mm] Max. load on table: 2500 [Kg] B axis swivelling stroke: +110 [°] / -110 [°] [°] Table surface: Ø 500 [mm] Stroke C axis: table revolution 360 [°] Spindle type: CAT No.40 Max. spindle speed: 18000 [rpm] Spindle power: 35 [kW] Tool changer magazin number of stations: 48 Max. tool lenght: 350 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 80 - 130 [mm] Number of hours under power : 8770 [h] Spindle running hours : 2354 [h] Machine dimensions: 5250 x 4300 x 3419 [mm] Weight: 16800 [Kg] INCLUDED EQUIPMENT: x1 MAZAK type DS50C-R1-Z5th-axis NC rotary table Ø500 [mm] – 360,000 positions x1 electronic handwheel Isdpfxey U Udye Anwsau x1 spindle chiller x1 high-pressure coolant pump 15 [bar] x1 chip conveyor More information upon request.