Used Spako 225 Litres for sale (2,872)

Condition: used, mileage: 216,730 km, power: 162 kW (220.26 HP), first registration: 10/2003, fuel type: diesel, empty load weight: 7,300 kg, maximum load weight: 7,200 kg, overall weight: 14,500 kg, axle configuration: 4x4, wheelbase: 3,200 mm, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, loading space length: 3,000 mm, loading space width: 2,380 mm, loading space height: 500 mm, front tire size: 315/60R22.5, rear tire size: 275/70R22.5, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel superstructure, Doka, 1x air seat, rear window, heated mirrors, electric window left, electric window right, air conditioning, cruise control, switch 8, ABS (anti-lock braking system), power take-off, raised exhaust, differential lock, driving lights, rotating beacon, leaf suspension, air+light trailer hitch, aluminum tank, low-noise G1, winter service equipment, lashing eyes, U-protection, swing flaps, yellow environmental badge Wheelbase: 3200 mm Body: Atlas 3-sided tipper body, front mounting plate, air conditioning. 6 cylinder engine ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ndedpfjvhiixsx Aa Rea - .

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Ndedpfx Aaouxfu Ne Rea Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: ready for operation (used), Rexroth MAD225C-0100-SA-S2-FH0-35-N1 / R911317252 Servomotor SN:7800406280035,used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Njdpfxotzhf Ue Aa Reda

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Nodpfx Aajb A Sd Do Rsda -Input: 3x380/500 V - 50/60 Hz /-10% -Output: 3 Ph: 0-380/500V 0-400Hz 5.5A AC -Weight: 6 kg

Condition: excellent (used), Konica Minolta Bizhub 2250p with small counter ( 7 million / engine ) The machine is in perfect condition , tested by our technicians , ready to print !! High Speed : 250 ppm ! Equipment : Ndedpfjl Ux Dmsx Aa Rsa - PF 703 ( X2 ) - RU 510 ( X2 ) - LS 506 - FD 503 - RU 509 - TD 501 - FS 532 As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions don't hesitate to ask me Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Please do not hesitate to contact us for further information.

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL8389617, unused, 100% functional, scope of delivery as per photos Ndsdercwqyopfx Aa Rea

Condition: used, Year of construction: 2006, Motan dryair tank + Heating LBA 300 – H-O-O-Z year 2006 Ndjdpfx Aoqnuh Hsa Rja Contact: Mr. Rainer Eckerle

Condition: used, functionality: fully functional, machine/vehicle number: JUNG 16, Fork length: approx. 240 cm, 7,601 operating hours Maximum load capacity: approx. 2,500 kg, Includes chip, Includes battery and charger Ndsdpfx Aewfhuaea Rja

Condition: good (used), used T-die 2250 mm, gap up to 1 mm auto-flex, cast film Ndodpod Ha Icofx Aa Rea

Condition: reconditioned (used), Robotic welding system with a 2 m, dual-station positioner. For sale is a robotic welding system from Yaskawa Motoman, including an RM2-250 positioner. Safety technology Robot: UP20 XRC Nozzle cleaner and more We can assemble and commission the system for you. Ndedpfjd Tfb Nox Aa Roa We also offer training and instruction. The system will be refurbished according to the customer's requirements. We are a YASKAWA system partner and offer you complete service for your Motoman robot and your systems.

Condition: used, We offer a Schlick HB 16/22-5,4-3/7,5 overhead shot blasting machine. Maximum workpiece size – width 1600 mm, height 2200 mm, maximum workpiece weight – 800 kg. Filter – 22 m³/h. Njdpfx Aey Abp Sea Reda 3 x turbines – 15 kW each, turbine diameter – 325 mm Total machine power consumption – 56.74 kW. The machine can be tested. Complete documentation is available with the machine.

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, overall weight: 4,200 kg, total height: 2,273 mm, spindle motor power: 24,000 W, spindle speed (max.): 7,000 rpm, number of axes: 5, This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm. Machine Benefits Nodjzlqqbjpfx Aa Rjda Qualitative Machine Benefits • Machine in very good, working condition, ready for test. Full documentation available. Technical Machine Benefits • Fire suppression system • Top oil mist filter • Max. Grinding wheel diameter: 200 mm Dimensions Machine Depth 2930 mm

Condition: used, We offer a used KARL SCHNELL 119 FD 225 D emulsifier – an industrial machine designed for continuous cutting, emulsifying, homogenizing and grinding of food products. The machine is suitable for meat processing plants, fish processing plants, production of fillings, pâtés, sauces, pastes, delicatessen products and convenience food. The KARL SCHNELL 119 FD 225 D belongs to the FD series of inline emulsifiers. Machines of this type are used wherever a very fine, uniform and stable product structure is required. The FD series is designed for high-quality emulsification and can be adapted with suitable cutting tools and drive configurations depending on the processed product. The heart of KARL SCHNELL emulsifiers is the KS cutting system, which enables intensive product size reduction in a continuous process. Depending on the application, this type of machine can operate with different cutting tool configurations, including knife systems with perforated plates. This allows the machine to be adapted to products with different structures, viscosity and technological requirements. The inline cutter operates continuously – the product is fed into the working chamber, passes through the cutting system and is discharged as a finely cut or emulsified mass. This solution helps increase production efficiency, reduce manual work and achieve repeatable product quality in subsequent batches. The machine can be used as a standalone unit or as part of a larger technological line, for example after preliminary grinding, mixing or bowl cutting. The KARL SCHNELL 119 FD 225 D is a good solution for plants looking for an efficient inline emulsifier for industrial food production. Technical data: Manufacturer: KARL SCHNELL Model: 119 FD 225 D Njdjzi U Rmopfx Aa Roda Machine type: emulsifier Power: 74 kW / 100 HP Power supply: 400 V Frequency: 50 Hz Motor speed: 2975 rpm Control cabinet operating voltage: 3 × 400 V / 50 Hz Control voltage: 230 V AC Construction: stainless steel Application: cutting, homogenization and emulsification of food product Main advantages: continuous inline operation high power of 74 kW motor speed 2975 rpm intensive cutting and emulsification of product possibility of obtaining a fine and homogeneous mass structure suitable for fillings, emulsions, pâtés, sauces and pastes can operate as a standalone machine or as part of a technological line solid industrial construction stainless steel construction renowned manufacturer KARL SCHNELL solution for continuous production in food processing plants

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Nedpfx Aozqunhea Rsda Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: used, Year of construction: 2022, Lot consists of: (1) Injection molding machine, temperature control: HB Therm | Miscellaneous: 1x conveyor unit by Motan Technical Details: Power supply: AC400V 3P/N/PE Frequency (Hz): 50 Current (A): 228 Installed power (kW): 137 Motor power (kW): 63.5 Heating power (kW): 33 Short-circuit rating (kA): 25 Screw diameter (mm): 65 Injection unit: 2230 Machine weight (t): 22.0 Ndsdpsy N R Htofx Aa Rja

Condition: used, mileage: 141,616 km, first registration: 01/2021, fuel type: diesel, tire size: 225/65R16C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2021, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - Speed limiter - Stability control - Alternating current = Further Information = Ndsdpfjzrcx Rsx Aa Roa Tire size: 225/65R16C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 3 mm; Tire tread depth right: 4 mm Rear axle: Tire tread depth left: 11 mm; Tire tread depth right: 9 mm Unladen weight: 3,055 kg Payload: 445 kg GVWR: 3,500 kg Damage: none

Condition: used, mileage: 71,381 km, power: 107 kW (145.48 HP), first registration: 04/2022, fuel type: diesel, tire size: 225/65R16C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 6,750 mm, total width: 2,070 mm, Year of construction: 2022, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional options and accessories = - Spare key - Speed limiter - Stability control - AC (alternating current) = Further information = Tyre size: 225/65R16C Ndedpfx Aajzrblve Rsa Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tyre tread left: 9 mm; Tyre tread right: 9 mm Rear axle: Tyre tread left: 10 mm; Tyre tread right: 10 mm Unladen weight: 3,005 kg Payload: 495 kg Gross vehicle weight: 3,500 kg Damages: None

Condition: used, mileage: 108,414 km, power: 107 kW (145.48 HP), first registration: 02/2021, fuel type: diesel, tire size: 225/65R16c, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 6,750 mm, total width: 2,100 mm, total height: 3,500 mm, Year of construction: 2021, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, trailer coupling, = Additional Options and Equipment = - Spare key - Speed limiter Nodpozra S Usfx Aa Rsda - Stability control - Alternating current = Notes = Car-Pass URL: Car-Pass ID: 75bec49d-4cea-416d-8340-e8180f410b87 = Further Information = Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Tire size: 225/65R16c; Steered; Tire tread left: 8 mm; Tire tread right: 8 mm Rear axle: Tire size: 225/75R16c; Tire tread left: 8 mm; Tire tread right: 8 mm Unladen weight: 2,975 kg Payload: 525 kg Gross vehicle weight: 3,500 kg Damages: none

Condition: used, mileage: 342,689 km, power: 120 kW (163.15 HP), first registration: 04/2023, tire size: 225/65R16C, axle configuration: 4x2, wheelbase: 4,340 mm, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, total length: 7,200 mm, total width: 2,190 mm, total height: 2,880 mm, Year of construction: 2023, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, tail-lift, = Additional options and accessories = - Spare wheel - Speed limiter - Stability control - Alternating current = Further information = Tire size: 225/65R16C Brakes: Disc brakes Suspension: Leaf spring suspension Njdpfx Aozra Uvoa Reda Front axle: Steered; Tire tread depth left: 3 mm; Tire tread depth right: 5 mm Rear axle: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Unladen weight: 2,660 kg Payload: 840 kg GVWR: 3,500 kg Damage: none

Condition: used, Year of construction: 1998, machine/vehicle number: 40225, functionality: fully functional, bending force (max.): 225 t, control type: CNC control, actuation type: hydraulic, Hydraulic CNC press brake from the brand HACO, model 40225, year of manufacture 1998. The machine has a nominal pressing force of approx. 225 tons and a working width of approx. 4,000 mm. Equipped with CNC control and electric backgauge, suitable for precise bending of steel and other sheet materials. Features European tool clamping system. Suitable for heavy-duty sheet metal processing in an industrial environment. The machine is offered in used condition. Ndodpfx Ajyhxtuja Rja

Condition: used, total width: 800 mm, total length: 1,250 mm, total height: 1,600 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 - Drive system: Conventional - Power [kW]: 0.55 - Table length [mm]: 290 - Table width [mm]: 225 - Min. spindle speed [rpm]: 320 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ndsdpozry H Sefx Aa Rsa Lukas van Rossum

Condition: used, Year of construction: 1997, total width: 500 mm, total length: 700 mm, total height: 1,800 mm, Empty weight: 200 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Power [kW]: 1.1 - Table length [mm]: 290 - Table width [mm]: 290 - Drilling depth [mm]: 80 - Drilling capacity [mm]: 20 - Reach [mm]: 225 - Min. spindle speed [rpm]: 210 - Max. spindle speed [rpm]: 2580 - Transport dimensions: 700mm x 500mm x 1800mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Nsdpezry Ntjfx Aa Reda Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Condition: Guide slightly worn, now only suitable for rough cutting Features and technical specifications: - Cutting length: 4,300 mm - Max. clearance height: 2200 mm - Max. trimming height: 2100 mm - Max. vertical scoring height: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4,500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Ndsdpfjzk N Hxex Aa Roa Availability: at short notice Storage location: Flörsheim

Condition: used, This listing is for WR PCR Workstation The unit is in full working condition and ready for immediate use This premium biological enclosure features twin UV decontamination action to neutralize airborne and surface contaminants, ensuring an ideal workspace for sensitive DNA/RNA amplification and sample preparation workflows. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Ndodpfx Aozqf D Hea Rea Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm Ndedpfswx R Rdjx Aa Rja column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.