Used Stierli-Bieger Bending Machine And Straightening Horiz. for sale (69,861)

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: Lhsdpfx Aoyvvrhsmtoi - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts Ljdpsyvvniefx Amtjhi - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, Year of construction: 2019, sheet width 1050 mm plate thickness 4,0 mm roll diameter 110 mm total power requirement 2,2 kw Lhsdpfx Amozh N Uwotji

Condition: used, functionality: fully functional, Year of construction: 2000, Set of two machines for bending flue or ventilation pipes. Available diameters: 97 - 110 - 125 - 139 - 150 - 180 - 200 Lhjdpfx Ajwa T Tdemtji

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m Ledpfx Aju Ibukjmtjhi dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: used, functionality: fully functional, Year of construction: 1995, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Tauring, controller model: CNC3A, number of rollers: 8, pipe diameter (max.): 60 mm, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, Tube & profiles bending machine ,Tauring Slalom 60-3A Lhjdszi Ew Rjpfx Amtoi 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable “tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw

Condition: good (used), Year of construction: 2006, control type: CNC control, actuation type: hydraulic, controller manufacturer: PC 300 TOUCH, number of rollers: 3, shaft diameter: 105 mm, overall weight: 2,200 kg, total length: 1,850 mm, total width: 1,600 mm, total height: 1,400 mm, Profile bending machine PBT - PBT 35 MACH-ID 9661 Make: PBT Type: PBT 35 Control: PC 300 TOUCH Year: 2006 Ljdpfxszguqnj Amtjhi Front rollers vario adjustable 360 - 1100 mm Power 11 kW each Force pressure in X-Axis 35.000 Kg Hydraulic drive variomatic UNP 200 x 1200 mm T 100 x 100 x 10 x 1200 mm Bar 80 x 80 x 1400 mm Pipe 180 x 2000 mm Horizontal and vertical:Vertical Shaft Ø: 105mm Number of rolls: 3 Stroke X-Axis: 390mm Resistance moment: 3000 NmCM³ Working speed: 1 - 16 U/Minmm/min. Length: 1850mm Width: 1600mm Height: 1400mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Gade Bending Machine 3100 X 25 Ton Mod. 30/25 Lodpfxowrrhwj Amtehi Used Machine Internal Code: Svr 317

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Ledpepxmaujfx Amtjhi Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: new, Special offer price for in-stock items. Only while supplies last. Price ex works, plus VAT. Round bending machine HRM 610, Bernardo Roller length: 610 mm Max. sheet metal thickness (400 N/mm2): 2.0 mm Roller diameter: 60 mm Length: 1200 mm Depth: 550 mm Height: 1030 mm Weight approx.: 166 kg Features: - Top roller with horizontal insertion groove for producing tight radii Lhodpohmbpqofx Amtji - Convenient pre-bending thanks to asymmetrical roller arrangement - Easy removal of the finished workpiece by pivoting the top roller - Lower and rear rollers equipped with wire insertion grooves as standard - Optimal price-performance ratio, supplied with a base frame as standard - Roller drive via a robust gear system - Adjustable rear roller for conical rounding - Bending rollers made of high-quality steel - For producing cones, tubes, cylinders, etc. Scope of delivery: - Conical bending attachment - Lower and rear rollers with wire insertion grooves - Base frame

Condition: new, Top and bottom blades removable in segments PNEUMATIC CYLINDER!!! Including manual back gauge Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Max. bending angle ----- 0 - 135 Weight ----- 590 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm Lhsdpfxoga T Dae Amtei

Condition: new, Finger bending machine with a segmented top clamp Including a manual back stop PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 45 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. bending angle ----- 0 - 135 Lhedpfx Aoga T Dhjmtsi Weight ----- 360 KG Width ----- 1620 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, input voltage: 230 V, - Shaft diameter 40 mm - Can be used horizontally/vertically - Foot control - Emergency stop - Includes 1 set of standard steel rollers - Documentation - 230V Lodslxw Rmopfx Amtjhi

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Lhedpfxjzgci Es Amtsi Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2008, condition: new, functionality: fully functional, machine/vehicle number: SA01700004, HAND STRIP WITH SINGLE-PIECE AND SEGMENTED BLADES AFM02 1260X1.5mm WORKING LENGTH: 1260mm Lhsdpfezl D Ugex Amtoi FOLDING CAPACITY: 1.5mm STAINLESS STEEL: 0.7mm ALUMINUM: 1.5mm

Condition: used, Year of construction: 2005, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 050G 2368, total width: 77 mm, total length: 125 mm, total height: 127 mm, Manufacturer: SAF Model: DS60 HV Year of manufacture: 2005 ITALY Lsdozl Avijpfx Amtjhi Machine in good working condition. Suitable for bending aluminium, steel and stainless steel profiles. Available for inspection under power. Location: Athens, Greece. Loading assistance available. ROTATION AXES: 3 ROTATION SPEED: 8.5-16(min-1) MOTOR POWER: 1.1/0.75Kw WORKING SURFACE HEIGHT: 100cm

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Year of manufacture: 2000 Technical data Manufacturer: STÖLTING Type: VB 322 Year of manufacture: 2000 Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Equipment • CNC control • Conical bending device Ledpfxszgf Rxo Amtehi • Operating manual All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Lsdpfjzgu Tijx Amtjhi Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller Lhodpfsy H N I Djx Amtji - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, 50 mm Lhedpfxsy H N Hms Amtoi 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 95 mm Shaft diameter 30 mm Lsdpfoyv N A Hsx Amtjhi Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, sheet width 1250 mm Lodpfx Asyvvpyjmtehi plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Ljdpfx Aou Snm Ismtjhi Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate Lhodpfjbahd Eox Amtji buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: new, Year of construction: 2026, Conventional, NC- or CNC-controlled hydraulic press brake / folding machine Maximum bending length: 2,500 mm Maximum bending capacity: - Steel sheet DC01-A with a tensile strength of approx. 350 N/mm² or material S235JR – 4 mm - Stainless steel sheet 304L – 2.5 mm - Aluminum sheet H24, tensile strength approx. 145 N/mm² – 5.5 mm - Zinc sheet according to DIN EN988, tensile strength approx. 190 N/mm² – 4.5 mm Upper beam stroke up to 110 mm Maximum bending angle: 135° Various back gauge options available: - Manual back gauge with 650 mm travel - NC-controlled back gauge with brush table or Lhodpfxezhkgze Amtji - NC-controlled back gauge with sheet supports and ball rollers Each with an adjustment range up to 1,470 mm Drive power: 5.5 kW Dimensions without back gauge: approx. 3.5 x 1.7 m x height 1.7 m Weight without oil filling: approx. 4,300 kg