Used Superfici Elmag Spraying Machine Superfici Magnum for sale (65,907)

Condition: used, Year of construction: 2002, machine/vehicle number: 810715, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 810D, table width: 500 mm, table length: 800 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: DC, Equipment: chip conveyor, documentation/manual, Vertical machining center DECKEL MAHO DMC 63V Year of manufacture: 2002 Machine number: 810715 Condition: Used Delivery terms: Free on truck Location: 57482 Wenden Availability / Collection date: The machine is expected to be available in November 2026 and must be collected on a fixed date to be agreed upon (likely in calendar week 48-2026). Payment terms: Payment in advance - by bank transfer Internal no.: 181-1 Can be inspected while running: Yes Technical data: Control: Siemens Sinumerik 810D Tool holder: SK 40 Operating hours: 76,500 (will increase slightly, as the machine is still in production until collection) Spindle hours: 24,100 (will increase slightly, as the machine is still in production until collection) Travel distances X / Y / Z: 630 / 500 / 500 mm Table dimensions: 800 x 500 mm Table load: 500 kg Tool changer: 24-position Feed rate in X / Y / Z: 30,000 mm/min Rapid traverse rate in X / Y / Z: 30,000 mm/min Spindle speed max.: 10,000 High-pressure coolant system Chip conveyor 400 V / 30 kVA / 50 Hz Scope of delivery: Available manuals The hydraulic vices, the associated hydraulic unit, the tool holders, and the zero-point clamping system are not included in the scope of delivery! Dimensions & Weights: Installation dimensions L x W x H approx.: 4000 x 3000 x 2650 mm Weight approx.: 5000 kg Djdpez Nhizefx Adrjcn If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►Upon request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Labeller that applies a label to the top and the bottom This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side. It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling machine, top and bottom label Dcedpez Ndf Rsfx Adrsn Label heads: 2 (above and below the belt) Controls: Touchscreen Construction: Stainless steel frame on adjustable feet

Condition: used, Used Urschel cutting machine, built entirely in stainless steel This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine. The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Cutting machine Infeed: Hopper Drive: Electric motor with belt drive Djdsz Ndk Hepfx Adrscn Controls: Own control box on the machine Construction: Stainless steel, on castors

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Pitney Bowes Relay 5000” enveloping machine Item for sale: Dodpfx Adjz Ixf Norecn 1 x Pitney Bowes Relay 5000 Meter readings: Total: Approx. 226,280 pages Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,950 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: HAAS, controller model: CNC Control, workpiece weight (max.): 680 kg, total height: 2,570 mm, total length: 2,570 mm, total width: 2,510 mm, table width: 356 mm, table length: 914 mm, table load: 680 kg, overall weight: 3,600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,950 h, spindle nose: CAT 40 / BT40, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The Haas VF-2SS is a compact, high-speed 3-axis vertical CNC machining center. The “SS” stands for Super-Speed. This machine is installed and operational at our location and can be inspected while running! This HAAS VF-2 SS is equipped with: - SS (Super Speed) version. - 24-tool magazine. - Internal cooling (IKZ). - Chip conveyor. - Renishaw OTS tool probe. - Renishaw OMP40-2 3D probe. - Programmable coolant nozzle. - Air blow gun. Dedpfx Aez Nhphjdrjcn - Coolant tank. - Original documentation.

Condition: used, functionality: fully functional, Year of construction: 2020, Egholm City Ranger 3070, available immediately on behalf of a customer due to retirement. Features include an Isri seat, seat heating, comfort package, spreader, and front sweeper, shortened to a machine width of only 122 cm (overall width). Speed: 40 km/h, only 940 operating hours. Purchase price (net): €49,900.00. Dodpfx Aex Ruwfjdrscn

Year of construction: 2016, condition: used, Places cups into your packs automatically This machine by Steven BV of Joure (NL) was built to place small cups, for example with sauce or dressing, into packs automatically. Cups come from the supply bin at the top and are guided down through the chutes. The frame stands on castors and its height is set with a handwheel, so it can be positioned over an existing conveyor. The rating plate shows it was built in July 2016, machine number 16016, supply 400 V. Dcedoz Ndc Aspfx Adren Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Cup dosing machine Power supply: 400 V Controls: Mitsubishi touchscreen, Dutch menus Construction: Stainless steel frame on castors, height adjustable with handwheel

Condition: used, Compact VFFS machine that forms, fills and seals bags This Audion turns a reel of film into pillow bags: the film is formed around the filling tube, sealed along the seam and closed at the bottom, after which the product drops into the bag from above. Suitable for dry, free-flowing products such as pasta, snacks or cut vegetables, fed by a weigher or doser. It is built compactly on a stainless frame with castors and has a touchscreen with adjustable seal temperatures. We did not find a rating plate with the model or year. Located in Emmeloord, the Netherlands. Immediately available, price on request. Dcodoz Nc T Hopfx Adrjn More photos and full specifications: / Type: Vertical form fill seal machine (VFFS) Bag style: Pillow bag Film transport: Two pull belts along the filling tube Controls: Touchscreen, adjustable seal temperatures Construction: Stainless frame on castors

Condition: ready for operation (used), Year of construction: 2016, Brand: HAKO Model: Scrubmaster B650 Year of manufacture: 2016 Capacity: 3200 m2/hour Scrubbing width: 65 cm Drive: 24V Dcodpfxez Ndvuo Adron Clean water tank: 72L Dirty water tank: 74L Internal charger, 220 volts. For more information, please contact us. Multiple machines in stock!

Condition: used, Grasselli RST 520 M Membrane Skinning Machine The Grasselli RST 520 M is a compact membrane skinning machine with an ergonomic working height. The machine is equipped with a quick blade change system. Integrated safety features ensure a high level of operator safety. The entire structure is made of 6 mm thick stainless steel. The toothed roller is cleaned by a dynamic toothed roller cleaning system, designed to ensure maximum cleaning efficiency with minimal compressed air consumption. The machine is equipped with two fixed wheels and two swivel casters for easy movement. Technical Specifications Dcedpfx Asz Nd Aqsdron Working width: 520 mm Voltage: 400 V (3+N, 50 Hz) Power: 0.75 kW Year of manufacture: 2002 Compressed air supply pressure: 6 bar Machine dimensions (W × D × H): 750 × 700 × 950 mm

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! Dcodpoz Nfirofx Adren This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli - Coolant tank - Original documentation.

Condition: good (used), Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction at this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Table type: universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise 160 mm Dcodpfxogyw S To Adren Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: V25.032, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Sanding machine Volpato LS-1N1RF1A, year of manufacture 2025, 400 V / 50 Hz, CE version. Standard configuration for sanding from right to left with a solid steel base and feed chain with rough rubber pads. 1 sanding belt unit for flat and shaped parts, tiltable from -45 to +90 degrees, with dust hoods with a diameter of 100 mm and sanding belt oscillation from 0 to 30 mm. 1 special double profiling unit with 2 motors of 1.1 kW (tiltable from 0 to -45 and from 0 to +45 degrees), tool diameter 70 mm, 12,000 rpm, with pneumatic shut-off per motor. 1 sanding disc unit. Control with a 7-inch touchscreen and PLC, 500 storable programs. Options: electronic speed control for the sanding belt unit and for the sanding disc unit, and end sanding wheel with flex-trim, complete with sanding strips. Dedpfx Adoz Ngk Rorscn

Condition: good (used), MERKLE Insquare W 300 AC/DC Welding Machine with original hose kit Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding processes: Selector switch, 10 levels: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular, TIG AC "Balanced TIG", Electrode Negative, Electrode Positive, Electrode "Sine wave", Electrode Rectangular Selector switch 1, 10 levels: Current 1, Time 1, Ramp-up and ramp-down time, Start current, End current, Ignition pulse, Spot time, Pre-flow and post-flow time Selector switch 2, 9 levels: Current 2, Time 2 (for pulse operation), AC Balance, AC Frequency, Hot start time and current, Current regulation, Electrode diameter, Display U Settings: 2 potentiometers for selector switches 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Dcjdpfx Adjl Sm Hbsron Time functions: Selector switch, 4 levels: OFF, Pulse slow, Pulse fast, Spot welding Ignition: Selector switch, 4 levels: OFF, High frequency, Lift-Tig Energy control: Selector switch, 4 levels: on the machine, Hand or foot control, Welding torch Operating mode: Selector switch, 4 levels: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations, freely assignable AC frequency: 50-200 Hz AC balance: 9-91% Gas pre-flow time: 0-3 s Gas post-flow time: 0-25 s Current ramp-up time: 0-2 s Current ramp-down time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Pulse slow: 10 ms-2.5 s Pulse fast: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200% Current regulation: 100-250% Button: Test protective device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Ramp-up, Current 1, Current 2, Ramp-down, End current Power source: IGBT inverter Ignition: High frequency or Lift-Tig Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin plug Torch cooling: Water-cooled Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with gas cylinder holder Gas cylinder holder: 10 - 20 - 50 l gas cylinder You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2019, condition: excellent (used), Westphal Mechanik C7x Commutator Slot Center Machine No. M64127 Year of manufacture: 09/2019 The commutator slot center has four processing steps. The following components are processed in these steps: Contact slot saw Insulation slot saw Deburring tool Brush The Stäubli TS 80 robot with SP1 control has two grippers that transfer the commutator to the individual stations. Software information: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC More images are available via this link. Further technical data will follow shortly. Dcodjg H Inzjpfx Adrjn Complete factory closure, large selection of storage platforms, pallet racking, shelving, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, all stainless steel belt width 400 mm mobile mesh width 5 mm adjustable speed Djdpfx Adez I N Rpjrecn with air knives with batter pump outside dimensions (l x w x h) : ± 1.900 x 900 x 1.900 mm with electric heating element: 3 kW - 230/400 V

Condition: new, KONICA MINOLTA ACCURIOPRINT C4065 DIGITAL COLOUR PRODUCTION PRESS Configuration: AccurioPrint C4065 main body OC-511 original cover OT-511 output tray MB-509 multi-bypass tray IC-607 Konica Minolta image controller Machine Description The Konica Minolta AccurioPrint C4065 is a professional digital colour production printing system designed for commercial printers, copy shops, in-plant printing departments and short-run digital production. It delivers high-quality colour printing, reliable media handling and support for paper weights up to 360 GSM. The machine is suitable for brochures, leaflets, business cards, invitations, direct-mail products, covers and other commercial print applications. Technical Specifications Printing technology: Four-drum tandem colour laser system Colour printing speed: Up to 66 A4 pages per minute Black-and-white speed: Up to 81 A4 pages per minute A3 colour speed: Up to 37 pages per minute Dcsdsz I N Etjpfx Adrjn Printing resolution: Equivalent to 3,600 × 2,400 dpi, 8-bit Colour depth: 256 gradations and 16.7 million colours Paper weight: 62–360 GSM, depending on the selected tray and media Standard paper size: Up to 330.2 × 487.7 mm Automatic duplex printing: Supported Long-sheet capability of the platform: Up to 864 mm duplex and 1,300 mm simplex with the required optional banner-paper accessories Standard main-body paper capacity: 1,500 sheets MB-509 bypass capacity: Up to 250 sheets of 80 GSM paper Total capacity in this configuration: Up to 1,750 sheets OT-511 output capacity: Approximately 150 sheets of 80 GSM paper Standard envelope-printing capability Supports plain, coated, textured, label, tab and selected speciality papers IC-607 Image Controller Konica Minolta IC-607 controller Operating system: Linux Processor: Intel Pentium G4400, 3.3 GHz Memory: 16 GB RAM Storage: 2 TB HDD Adobe PostScript 3 PDF direct printing TIFF direct printing PPML 2.2 PCL 5C and PCL XL Gigabit Ethernet connectivity OC-511 Original Cover Original-glass cover for manual scanning and copying Suitable for individual sheets, books and three-dimensional originals Please note: an automatic document feeder is not included in this configuration Electrical and Physical Data Electrical supply: 220–240 V, 16 A, 50/60 Hz Maximum power consumption: Approximately 3.84 kW Main-body dimensions with OC-511: Approximately 800 × 903 × 1,076 mm Main-body weight: Approximately 312 kg Included Equipment Konica Minolta AccurioPrint C4065 main body Original Cover OC-511 Output Tray OT-511 Multi-Bypass Tray MB-509 Konica Minolta Image Controller IC-607

Condition: used, The CFS GEA Koppens VM 600 HSE is a 600 mm inline MLF MultiFormer, designed for forming food products into various shapes and sizes. The machine can produce both round and rectangular products, making it highly versatile for a wide range of food processing applications. This forming machine is suitable for various sectors of the food industry, including bakery, meat processing, convenience foods, snacks, salads, cheese, vegetables, fruit, processed meat products, fish, vegan and vegetarian products, baby food, and pet food. The automatic patty and burger forming machine features a large feeding hopper. The product is transferred into the forming mold by four screws. The mold is then moved above the conveyor belt, where a pneumatic ejector pushes the formed product out of the mold and onto the conveyor. The machine can be easily integrated into an existing production line. The MLF forming machine is entirely constructed from stainless steel, ensuring hygienic operation and easy cleaning. Features: Suitable for forming food products into various shapes and sizes. Capable of producing round and rectangular products. Dcsdpfx Adez Nfawerjn Automatic feeding system with four screws. Pneumatic product ejection system. Large-capacity feeding hopper. Continuously adjustable operating speed. Easy integration into existing production lines. Fully stainless steel construction. Technical Specifications: Production capacity: Up to 50 strokes/min Hopper capacity: 320 L Working width: 600 mm Product thickness: 6–40 mm Usable forming mold area: 570 × 130 mm Speed control: Continuously adjustable Voltage: 400 V (3+N, 50 Hz) Power: 22.18 kW Weight: 1750 kg Compressed air supply pressure: 6 bar Water supply pressure: 1–4 bar Machine dimensions (W × D × H): 3250 × 1300 × 2510 mm

Condition: good (used), Winkworth GU13 Ribbon blender Dodpjz Itkmofx Adrecn Capacity 90L, stainless ribbon blender, bottom outlet discharge, with inspection hatch, 2.2Kw motor, on mobile frame, 3Ph

Condition: good (used), Year of construction: 1998, Mikron UM 710/900 Universal Milling Machine Dedpfx Aszcqcgjdrjcn High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and generous work area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Work area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Work table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150 liter capacity Machine weight: approx. 4,300 kg (incl. safety cabin) Product video “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Mikron WF 41C CNC Universal Milling and Drilling Machine Professional, extremely robust CNC universal milling and drilling machine MIKRON WF 41C Due to its stable design, the machine is ideal for workshops, prototype construction, maintenance, or demanding toolmaking. The machine is equipped with the proven HEIDENHAIN TNC 155 path control system. Thanks to its clear-text dialogue guidance, it can be programmed extremely easily directly on the machine, supports graphic simulations, and allows easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical data at a glance CNC control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital display), positioning with manual input, single block, sequence of blocks, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed drives & travels Travel in X-axis (table longitudinal, automatic): 630 mm Travel in Y-axis (spindle carriage transverse, automatic): 500 mm Travel in Z-axis (table vertical, automatic): 460 mm (p. 1) Feed rate: continuously adjustable from 1 – 3000 mm/min in all 3 axes Rapid traverse rate: X and Y axes: 6000 mm/min | Z axis: 4000 mm/min Max. vertical installation height: 559 mm (between vertical milling head and rotary table) Milling spindle drive Working spindle speeds: 21 gear stages Speed range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M 16 with draw-in groove (SK 40 DIN 2080) Arbor movement (vertical): 90 mm Table geometry & workpiece capacity Rotary table clamping surface: 500 x 1000 mm T-slots: 7 pieces (distance: 63 mm, width: 14-H7 mm) Clamping surface perpendicular: 397 x 550 mm (with 4 x 4 threaded holes M16, distance 90 mm) Max. recommended workpiece weight: 500 kg Electrical system & cooling Electrical connection power: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Net machine dimensions: 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. space requirement during operation (including control console): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (including vertical milling head and rotary table) Product video Dcjdpfx Adjzcqf Ioren “Everything from one source: We would be happy to offer you a suitable bank financing option for your project.” More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and post-processing line The system consists of three high-quality industrial components: Dcedpfx Adjzklb Ejren 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to a maximum of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter dust extraction system Performance: 4 horizontal, high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine, specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: good (used), Instron Wolpert V-Testor 4562 Micro- and Low-Load Hardness Tester Dcsdpjzniayofx Adren High-quality and extremely robust low-load hardness tester from the renowned manufacturer Instron Wolpert, model V-Testor 4562 (V-Testor 2 series). These mechanical-optical precision instruments are known for their exceptional durability and reliability in materials testing, metallography, and quality assurance. The device is ideal for Vickers (HV) hardness testing in the low-load range. Application area: It is typically used to determine the hardness of thin films, surface structures, small precision parts, or metallographic samples in laboratories and for quality assurance purposes. Technical data & details: Manufacturer: Instron Wolpert GmbH Model: V-Testor 4562 Testing method: Vickers (low-load range) Optics: Integrated precision measuring microscope for evaluating the indentations Application area: Hardness determination of metals, thin films, and surface structures You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Second-hand machine Second-hand Ganner Compact 30 row drilling machine Features and technical specifications: 2 drilling beams, each with 15 spindles Pitch 32 mm Drilling unit position adjustment 0–650 mm Distance between rows of drill holes: at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Maximum workpiece clamping height: 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen Dcsdpfxszk Nwdj Adrsn

Condition: excellent (used), Year of construction: 2013, 4 axes CNC work center for max. glass sizes : 3250 x 1620 mm for edging , milling and drilling and engraving one 14 positions rotating tool change . Djdpfoz I Rglox Adrjcn spindle power : 15 kw spindle speed : 12000 rpm weight : 6450 kg