Used Unknown 150 X 300 for sale (71,051)

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 1570 x 150 Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end Hardened rollers Device for conical bending Separate control panel Roll length: 1570 mm Gbjdpfoxrc Dtex Ahtjr Top roller diameter: 150 mm Side roller diameter: 130 mm Total motor power: 4+3 kW Weight: 2,470 kg Dimensions (mm): 3350 x 1200 x 1210 (L x W x H) Bending performance data 6 mm at minimum internal diameter (5 x top roller) 4 mm at minimum internal diameter (1.5 x top roller) Pre-bending performance data 4 mm at minimum internal diameter (5 x top roller) 3 mm at minimum internal diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel)

Condition: new, Scantool Industrial Belt Sander 150 x 2000 Gbjdpogk Al Ssfx Ahtor Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 hp Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 150 x 2000 mm Platen size: 530 mm Weight: 100 kg The Scantool industrial belt sander models 75 x 2000 and 150 x 2000 are powerful, high-quality machines, built in accordance with the strictest environmental and safety regulations. The belt sanders are equipped as standard with a motor brake, adjustable working height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The continuously adjustable working height enables an ergonomically correct working position. Perfect design for fast, effective and safe sanding. Self-adjusting belt tension. Danish top quality.

Condition: new, Industrial belt sander Scantool 150 x 2000 with integrated double dust extraction system Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 hp Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 150 x 2000 mm Platen size: 530 mm Weight: 115 kg The Scantool industrial belt sander models with double dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built according to the strictest environmental and safety regulations. The belt sanders are standardly equipped with a motor brake, adjustable working height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The infinitely adjustable working height enables an ergonomically correct working position. Perfect design for fast, effective, and safe sanding. Self-adjusting belt tension. Danish top quality. Gbsdpfx Ahsflt Aljtsr

Condition: new, Bernardo belt grinder MS 150 x 2000 S-2 Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/s Contact wheel diameter x width: 200 / 155 mm Flat grinding table: 460 x 150 mm Dust extraction port diameter: 100 mm Motor output power S1 100%: 2.1 / 2.8 kW Motor input power S6 40%: 2.8 / 3.6 kW Gbedpfx Ahsd Rw Rhstjr Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 150 Technical specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment Gbodpeiw D Ecefx Ahtor digital display sheet metal width 1070 mm sheet metal thickness 8.0 mm max. sheet metal thickness 7.0 mm for pre-bending roller length 1070 mm smallest diameter 225 mm roller diameter 150 mm weight 1400 kg dimensions L-W-H 2600 x 630 x 1020 mm motor 4.5 KW Equipment: top and bottom rollers electrically driven top roller can be pivoted out conical bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm Gsdpepag Ttjfx Ahtebr - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-C cold water trailer, similar but without ROM, Rioned, Karo, etc. Gbjdpfxsfdvkrs Ahter - Single-axle trailer with hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, rear lights and reflectors, tow hitch for 50 mm coupling, 13" tires and ABS. The following cold water models are available: CTR-C 43/180 | 43 l/min at 180 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 55/160 | 55 l/min at 160 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 60/150 | 60 l/min at 150 bar | Diesel engine: Kohler KDW 1003 19 kW CTR-C 20/350 | 20 l/min at 350 bar | Diesel engine: Kohler KDW 1003 19 kW - Dimensions: 3,045 x 1,390 x 1,190 - Unladen weight: approx. 350 kg - High-pressure pump: Comet TW Premium with integrated gearbox - HD hose reel: manual, with max. 60 m of 1/2" hose (included). Model CTR-C 55/160 OPTIONAL with electric HD hose reel. - Water supply hose reel: manual, with 35 m of 3/4" hose - Water tank: 400 l - Options such as remote control, booster pump, warning light, work light, aluminum hose cover, and accessories available upon request.

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES:  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Version with 2 HD hose reels; Gbsdpfxof Arugj Ahtjr  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Condition: used, hexagon screw DIN 933 fully threaded M 36 x 300 mm total length - galvanised strength class 10.9 hexagon spanner width 55 mm thread pitch 4 mm - ISO metric thread Gedpfxovimtde Ahtjbr weight 2.5 kg *- 110 units on stock - price per unit -* sale in items consisting of at least 10 units

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Godpovy H Iiofx Ahtebr Stroke: 350 mm Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Gbsdpexdt Umefx Ahtsr Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Hard stone plate, granite plate, granite block Hard stone block, angle block, precision-machined on all sides Measuring cube, measuring plate Length: 1590 mm Width: 300 mm Height: 470 mm - 2 pieces of Ø 80 mm bores - 2 pieces of Ø 120 mm bores Godpfx Ahsg Uar Detjbr - Threaded inserts, mostly M16, some with M12 and M18 Weight: 570 kg Good condition

Condition: used, Cross table with handwheels Table size: 300 x 200 mm Travel in X: 160 mm Travel in Y: 240 mm Godjxf Uxiopfx Ahtsbr Construction height: 141 mm - Spindle pitch 4 mm (4 mm travel per handwheel rotation) - Rotatable by 340° - Dovetail guideway - 2x T-slots in the clamping surface, 14 mm Weight: 38 kg Good condition

Condition: new, sheet width 1000 mm plate thickness 8,0 mm distance between columns 1070 mm diameter of upper rolls 150 mm pre-bending capacity 6,o mm connected load 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) Gedpfofv H A Hox Ahtjbr - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V

Condition: used, This servo controller / module from the Indramat brand is for sale. Model: KDS 1.3-150-300-W1 Number: 253924 K06/96 Good, used condition. Fully functional! Gbjdpjrr Tglsfx Ahter Please contact us if you have any further questions or are interested. Installation can also be organized on request.

Condition: refurbished (used), This servo controller (servo module) from the Indramat brand is for sale. Model: KDS 1.1-150-300-W1-220 Gsdpfsrr Tbcox Ahtsbr Number:234608 K42/92 The controller has been overhauled and tested. Fully functional! Please contact us if you have any further questions or are interested. Installation can also be organized on request.

Condition: refurbished (used), PRICE ON REQUEST! - 5 units, used and inspected completely overhauled, all wear parts replaced - completely measured - Gear play: Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.02 WM - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand available for exchange (without exchange available on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional fee Gbedpfx Ahjg A Iv Estjr MORE THAN 100 central hands immediately available in stock, various models. Just inquire! We also offer an express overhaul of your KUKA central hand – 48-72 hours from delivery. In addition, we also offer the repair of ABB wrists.

Year of construction: 1996, condition: used, material width 150 mm material thickness 2,5 mm feed length 485 mm Gbedpfx Aheul D Sletjr total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Technical data: Planing width: up to 300 mm Gsdpfx Ajw Sh Dmjhtebr Planing height: up to 130 mm Number of heads: 6 bottom – 5.5 kW right – 5.5 kW left – 5.5 kW top – 5.5 kW universal 360° – 5.5 kW bottom – 7.5 kW Feed motor: 2.2 kW, stepless adjustment via inverter 4 feed rollers in the table

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Gjdpfx Ahjv A Uw Djtebr Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: like new (used), Scale with the following dimensions: Length 2000 mm Width 1500 mm Height 110 mm Aisi 304 L stainless steel Load capacity 3000 kg The scale has valid certification for over 2 years Touchscreen display with multiple functions and language selection option Please check my other listings Gbedpfxey Ilvyo Ahtjr

Condition: new, Year of construction: 2024, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the multi-tier shelving unit: Manufacturer: LPR Type: 600 1x Multi-tier shelving unit, new Material color: blue / orange Overall height including rollers: 2,150 mm Overall width: 1,550 mm Overall depth: 600 mm Number of levels: 3 pcs. Each consisting of: 2x Shelf uprights, new Material color: blue Frame profile dimensions: 50 x 50 mm Including cross and diagonal braces, Metal footplates, plastic Cover caps The uprights are pre-assembled (screwed framework) 2,000 mm high 600 mm deep 6x Workbench traverses, new Material color: orange Design: Step traverse Clear width: 1,450 mm Profile dimensions: 80 x 50 mm Shelf load 300 kg with evenly distributed load 12x Locking pins, new To secure the longitudinal beams against unintentional lifting out 3x Shelf inserts, 2nd choice, used Thickness: 22 mm Dimensions: 1,430 x 545 mm 2x Double-stop swivel casters, new 2x Swivel casters, new Gedsdb N Hmspfx Ahtsbr 8x Machine screws: M8 x 20 mm 8x Nuts: M8 8x Washers: The images are for illustrative purposes of the material. The material color may vary. - The workbenches are supplied unassembled; - The workbench uprights are pre-assembled; - The production time is usually approx. 3 - 5 working days. Our services at a glance: (Prices upon request) - Assembly, installation Our general assembly conditions apply - Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelving systems - Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x shelf stands, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkheads and base plates The stands are pre-assembled Gbedpfx Ahsvmp I Sjtjr 2,278 mm high 400 mm deep 02x shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight | piece: approx. 4.65 kg max. load per shelf 200 kg with uniform distributed load 01x base panel, used for floor length: 994 mm Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Piece: approx. 0.51 kg 05x shelf traverse, 2nd choice (new goods) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm Hole grid: approx. 53 mm Agraffe: 3 HK (hooks) Weight | Piece: approx. 1.70 kg 15x compartment dividers, second choice (new goods) Material color: galvanized Type: APH 340 Total length: approx. 340 mm Usable length: approx. 315 mm Total width: approx. 100 mm Pipe diameter: approx. 12 mm Weight / piece: approx. 0.170 kg 01x cross brace, used Designation: KV31013 Material color: sendzimir galvanized Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 106x wire mesh grating, new Material color: Sendzimir galvanized Load capacity: 500 kg; with uniformly distributed load Design: resting Depth: approx. 1,100 mm (direction of support bars) Width: approx. 1,150 mm Mesh size: approx. 100 x 60 mm Gbodpfxei Hkpde Ahtsr Number of crossbars: 3 pcs. Weight: 5.00 kg | per piece

Condition: good (used), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x shelf stands, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Incl. bulkheads and base plates The stands are pre-assembled 2,494 mm high 400 mm deep 02x shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight | piece: approx. 4.65 kg Max. load per shelf 200 kg with uniform distributed load 01x base panel, used for floor length: 994 mm Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Piece: approx. 0.51 kg 05x shelf traverse, 2nd choice (new goods) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm Hole grid: approx. 53 mm Agraffe: 3 HK (hooks) Weight | Piece: approx. 1.70 kg 15x compartment dividers, second choice (new goods) Material color: galvanized Type: APH 340 Total length: approx. 340 mm Usable length: approx. 315 mm Total width: approx. 100 mm Pipe diameter: approx. 12 mm Weight / piece: approx. 0.170 kg 01x cross brace, used Designation: KV31013 Material color: sendzimir galvanized Your contact person in our company: Mr.: Andre Evering Gbodpfevmxuhjx Ahtsr Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.