Used V 10 / * Double Steering !! for sale (69,426)

Condition: used, Year of construction: 2024, Plough body STU 40, 1 pair coulter blade 430, 1 pair HD coulter point, 1 pair / skimmer stick f frame height 80 f hydr. overload safety device Skimmer M2, 1 / pair disc coulter holder disc coulter D 500 serrated Plant guard, 1 pair / body attachment m Iiodpot A Udyefx Amgsh

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Iijdpfx Amed Ambtogsh Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: used, fuel type: diesel, Year of construction: 2023, machine/vehicle number: EXVAC SE.10, RIVARD suction excavator EXVAC SE.10 !! IMMEDIATELY AVAILABLE !! RIVARD industrial turbine Detachable suction hose connection 10.5 m³ container volume 4-link boom Hydrostatic drive Filter cleaning Iiodjkl N R Aspfx Amgeh Fall protection at the rear / front Camera-based travel monitoring

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm VC-10 weight (approx.): 150 kg Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Iiedpfxjybbd Sj Amgsh Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Fanuc A06B-6127-H202 SV 10/10HV module SN V11128664, used, in good condition, 100% functional, scope of delivery as per photos. Isdpfex Erdrsx Amgjih

Condition: used, YALE Electric Chain Hoist Crane Type CPV 10-8/20-4 Serial No.: VC 000876 S Year of manufacture: 2010 Load capacity: 2,000 kg Hook travel: 4.1 meters Lifting speed: 4 m/min Distance suspension to load hook: 550 mm Pendant cable length: approx. 2 meters 2 fall chain = 2,000 kg Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz Iiedpfox Urb Nex Amgsh - Emergency stop - Suspension eye on crane top - Without trolley Weight: 65 kg Good condition

Condition: good (used), Year of construction: 1997, Lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist Ijdpfxsy D Hk Rs Amgoih -Manufacturer: LHS load handling equipment, compensating spreader beam for transporting different loads -Type: TIV 10-6 -Loading capacity: 10 t -Transport dimensions: 6030/410/H930 mm -Empty weight: 720 kg

Condition: used, functionality: fully functional, machine/vehicle number: F20270E00720, Year of construction: 2014, operating hours: 230 h, load capacity: 1,000 kg, lifting height: 1,490 mm, free lift: 1,490 mm, fuel type: electric, mast type: simplex, construction height: 1,950 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian pallet stacker Chassis number: F20270E00720 Load center: 600 mm Mast type: Standard Iodpsy Dkgiefx Amgsih Condition: Refurbished, no warranty Technical condition: good Description: With new battery.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: Iedpfxsyr H Ans Amgeih RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 (3D), spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. • Operating hours: • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h • Power-on hours (counter): 60,300 h • Condition: Powered on and running in production; inspection possible (operation, geometry, overall condition) • Worktable size: 1400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) • Spindle: • Tool clamping: DIN 69872 • Tool magazine: 30-position chain-type magazine with double gripper • Cooling/media: Coolant–air switching via M-function (external), chip tray Iiedpfx Amoylkl Tjgsh • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z; air purge for measuring system • Additional machine options: • Safe voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop trigger • Software options – HEIDENHAIN: • Option 3 (#21): M120 tool radius compensation for contouring, LOOK AHEAD up to 99 blocks, 3D machining, M118 handwheel positioning during program execution Additional equipment • Scraper-type chip conveyor (left side) • Coolant tank, 250 l • Manual wash gun for machining area • 4-color signal tower • HEIDENHAIN probing package: Wireless workpiece measuring probe and probe calibration ring • Manual handwheel (portable control panel) Additional information • A brand-new original DMG spindle was installed by DMG Service in November 2024 • The service report includes both the spindle measurements and the machine geometry measurements taken after the replacement Technical Specification Taper Size SK 40

Year of construction: 2006, operating hours: 2,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Iiodpfx Amsh Tyzisgsh Vibrator MR 100 V for RTG Piling rigs inclusive clamp MRZ 105

Condition: used, fuel type: electric, Control, control part, interface, driving control, driving current control, inverter driving control, driving control -Manufacturer: Zapi, inverter drive control from electric forklift Sichelschmidt M 1510 V Isdpfx Aeizugnomgoih -Type: SEM-1 -Mat no.: 7020 0442 FS5002 -Voltage: 48V -Dimensions: 210/150/H70 mm -Weight: 1 kg

Year of construction: 1998, condition: used, fuel type: electric, Running gear, electric motor, DC motor, traction motor, drive motor for order picking truck, drive wheel for electric pallet truck -Manufacturer: Sichelschmidt, chassis drive motor from electric stacker M 1510 V -Drive motor: Best Motor F1205800 48V 2 kW Iiedji Dbzvspfx Amgjh -Individual components: see photos -Wheel: Ø 320 mm -Dimensions: 410/330/H760 mm -Weight: 100 kg

Year of construction: 1998, condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Sichelschmidt, steering motor from electric forklift truck M 1510 V -Motor: Motovario 113-MP-NV-Q 48V/500W -Dimensions: 400/160/H180 mm Iijdpfx Asi Dbz Ijmgoh -Weight: 17 kg

Condition: ready for operation (used), Schroff SB 201 / 4-6 V, 3 A / No. 11005-58 31061-036 Power Supply, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iisdoi Ec Iispfx Amgeh

Year of construction: 2016, condition: new, machine/vehicle number: 180147360, D10 control clutch * newly overhauled * Further information: Type: gearbox, Overall condition: very good, Technical condition: very good, Optical condition: very good. Iisdpfehyuy Ejx Amgsh

Condition: good (used), Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, inline pump MOVI -V 25/1Drive: 0.55 kW -Speed: 2840 rpm -max. delivery rate: m³/h -max. head: 39-24 m -Dimensions: 185/185/H555 mm -Weight: 22 kg Ijdpfx Aof S Ncpjmgjih

Year of construction: 1998, condition: excellent (used), I sell the window profiling automat centre Weinig Univar 10 Iiodpfx Amofzzhrjgsh Year 1998. Moulding heads OERTLI. Available immediately. Unit price 8.500 euro. 4 pcs. available. Condition very good !

Condition: used, mileage: 69 km, first registration: 08/2023, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2023, operating hours: 8 h, machine/vehicle number: EXVAC SE.10, RIVARD Vacuum Excavator EXVAC SE.10 Iiedog Dl Arspfx Amgjh !! IMMEDIATELY AVAILABLE !! RIVARD Industrial Turbine Detachable Suction Hose Inlet 10.5 m³ Container Volume 4-Link Boom Hydrostatic Drive Filter Cleaning System Fall Protection System (Rear / Front) Camera-Based Travel Monitoring

Condition: ready for operation (used), Metronic MI64210200-01 control panel - 230 V / 1.0 A / 50 Hz, used, minor signs of use, 100% functional, scope of delivery as per photos Iiedpfx Aetxuhxomgeh

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Iiedpfx Ajr D Ngtjmgeh YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2023, Extension of the central hydraulic handle for frame height 80, 1 P plough body STW / 35, 1 pair of coulter blade 430, 1 pair of HD coulter point, 1 pair of insert plate for STW / 35, 1 Paa disc coulter holder for Variopf disc coulter D 500 serrated and / spring-loaded, 1 Isdpjr Ucigofx Amgjih

Condition: used, Year of construction: 1988, machine/vehicle number: 1686, Zähler für Falzmaschinen - Counter for Folding machines Gremser VZG 10-4Year 1988 - Serial-No. 1686 with pulserless - to move Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Iijdsh Ax A Aspfx Amgsh

Condition: used, Year of construction: 2003, functionality: fully functional, Used REK cleaning system Iodpsvyp D Tsfx Amgsih Very little used Full vacuum technology 12 kW distillation unit with hot discharge technology, Basket size 530x320x200 mm The system has been technically tested by us for functionality. We can quickly provide training, commissioning, service, and spare parts. We have over 25 years of experience with REK systems. System dimensions: 2700x2500x2600 mm

Condition: good (used), Module converter, electronic module -Wire type: DSV 5421-10/220 Iodpfx Amefcl H Ijgjih -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg