Used Vital Fs41Nsd for sale (183)

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Kdsdoxzf Dzopfx Afdsk Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: Kodpfx Afokw Ukujdodk •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Kdsdexyhhaspfx Afdjk Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm Kdodexxxbzjpfx Afdek DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), The Thermo Scientific Dionex ICS-Series VWD is a highly advanced variable wavelength detector designed to provide accurate and precise detection of analytes in complex samples. It is a vital component of the Dionex ICS-Series chromatography system and is used for a wide range of applications, including pharmaceutical research and development, environmental monitoring, food and beverage testing, and more. The detector is equipped with a state-of-the-art flow cell design that ensures excellent signal-to-noise ratios, providing exceptional sensitivity and selectivity for even the most challenging separations. The flow cell is also designed to minimize dispersion and band broadening, ensuring high resolution and accurate peak detection. The Thermo Scientific Dionex ICS-Series VWD Detector features a variable wavelength range of 190 to 900 nm, which enables it to detect a broad range of analytes. It also has high-speed scanning capabilities, enabling rapid data acquisition and analysis, making it ideal for high-throughput applications. Good working condition. Kdodsxnm Rvepfx Afdok Please check out our other listings as well.

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 570 mm, Swing over bed Ø: 570mm Swing over cross slide Ø:365mm DBC Turning Length: 2000mm Spindle bore: 62mm Spindle power: 25kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 4Mk Workpiece weight: 2500 Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 10000mm/min. Length: 5200mm Width: 2200mm Height: 2100mm Weight: 5200kg Kdedsxxh N Uepfx Afdjk Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2020, Precise Testing for Durable Materials Ksdpfxjxw Ulms Afdjdk An abrasion testing machine is an indispensable tool for materials testing, enabling you to assess the abrasion resistance of products and thus ensure the longevity and durability of materials. These machines are especially vital in industries such as automotive, footwear manufacturing, textiles, and plastics processing, where resistance to wear and abrasion is critical. With an abrasion tester, you can accurately measure how well materials withstand repeated contact and friction. Abrasion testing machines provide precise, repeatable results that help you optimize the quality and durability of your products. They simulate realistic operating conditions where materials are exposed to mechanical wear, allowing you to determine key performance indicators such as coefficient of friction, degree of wear, and surface changes. This targeted data supports the development and improvement of products destined for high-stress environments. An abrasion testing machine operates with various test methods and standards tailored to the specific requirements of your industry. Whether testing rubber, plastics, textiles, or leather, an abrasion tester enables you to quickly and easily determine the resistance of your material to abrasion and wear. These measurements are essential to guarantee the durability and performance of products in their respective applications.

Condition: excellent (used), CNC Lathe with y-axis DMG MORI - CTX BETA 800 4A Kjdpfx Afoxuqw Hodsdk MACH-ID 9282 Make: DMG MORI Type: CTX BETA 800 4A Control: Siemens 840 D-SL Year: 2012 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Ksdpexuqv Ajfx Afdsdk Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length Kdedpfx Asxtbf Ejfdsk 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Kjdpfx Aexta E Rofdodk Type: RD-3800 R Control: Siemens Simatic Year: 2014 Maximum diameter 3800 mm Minimum diameter 710 mm Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Flanging height 90 mm Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Kdjdpoxtaxwefx Afdek Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: unexamined, machine/vehicle number: OneAdvisor 800, Used Viavi OneAdvisor 800 network analyzer set in carrying case. Manufacturer: Viavi Solutions Model: OneAdvisor 800 Including, among other items: charging cable, optical connector cleaner, universal adapter, and documentation. Kdodpfx Afexmh E Sedjk Manufacturer description: The VIAVI OneAdvisor 800 distinguishes itself with a sophisticated design and a multifunctional architecture that accommodates a wide range of test applications, effectively scaling to different user groups and deployments, including: General Purpose Spectrum Analyzer: Designed for laboratory and manufacturing environments, the OneAdvisor 800 serves as a robust RF testing tool. It provides comprehensive spectrum analysis capabilities, enabling precise measurement and analysis of RF signals across various frequency ranges. This is essential for regulatory compliance and optimizing RF performance across operating conditions. Fiber and Cable Verification: For radio and antenna system installations, the OneAdvisor 800 is critical for verifying fiber and cable connectivity. It performs thorough tests ensuring seamless integration and optimal functioning of these components. By validating fiber links and cable connections, it guarantees reliable signal transmission, improving overall system efficiency and reliability. Wireless Signal Quality and Coverage Assessment: For mobile network testing, the OneAdvisor 800 offers vital tools for evaluating signal quality and coverage. It conducts detailed measurements to assess signal strength, identify coverage gaps, and check network performance metrics. This supports network optimization, troubleshooting, and improved user experience by maintaining consistent connectivity and service quality. Detection and Location of RF Interference Signals: In wireless networks, the OneAdvisor 800 excels at detecting and pinpointing sources of RF interference. It uses advanced analysis to identify and locate signals that adversely affect network performance. Prompt identification allows for swift mitigation of interference, ensuring optimal network reliability and performance. Transport Network Validation: The OneAdvisor 800 extends its capabilities to validating transport networks, supporting bandwidth provisioning in Ethernet networks up to 100Gbps. It conducts in-depth tests for network throughput, latency, and packet loss, ensuring robust performance and adherence to service level agreements (SLAs). It also enables precision time protocol (PTP) validation, vital for synchronization in 5G radio X-Haul networks, ensuring smooth integration and operation of advanced 5G infrastructure. The VIAVI OneAdvisor 800 offers versatility and dependability, providing an all-in-one solution for diverse testing requirements across industries and user types. Its comprehensive features—ranging from spectrum analysis to interference detection and transport network validation—make it an essential tool for network performance optimization, quality assurance, and supporting next-generation communication technologies such as 5G.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor Kjdpfxoxdxhro Afdjdk X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Kjdpfx Afoxf E Rcodsdk Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, total width: 1,000 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Angles plate ASQUITH - HT-35/10 MACH-ID 9260 Make: ASQUITH Type: HT-35/10 Year: 2021 Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:1 Kodpfx Aexhgg Defdsdk Length: 1200mm Width: 1000mm Height: 3500mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, overall weight: 8,000 kg, total height: 300 mm, total length: 6,000 mm, total width: 2,000 mm, Make: STOLLE Type: TDG 6/2 Year: 2021 Floorplate Length: 6000mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 6000mm Width: 2000mm Height: 300mm Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Kodpfxoxf Exge Afdsdk

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm Kjdpfx Afexf E Twededk ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, Head Pick up Station TUPC CNC Indexing Micro Head A-Axis 360.000 x 0,001 Gr C-Axis 360.000 x 0,001 Gr SELS Spindle extionsion L=500 mm CTS Internal coolant system ATC Chain Tool changer 60 Positions Hydrostatic guideways Optional T Slotted floorplates 5600 x 1875 (2x) + 4000 x 1875 mm Kdedpfexpfkkjx Afdjk X-Axis: 16.000mm Y-Axis: 3.500mm Z-Axis: 1.500mm Power on spindle: 80kW Spindle speeds: 4000Rpm Spindle Taper: Sk59ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 24000mm Width: 6500mm Height: 6500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Kodpfxjxmf R Se Afdsdk Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Tool blocking power 1968 daN Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Table Length: 3800mm Table Width: 1000mm Table load: 30000 Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Kdedsxc Hh Dspfx Afdsk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Length: 8820mm Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 8,000 m/min, rapid traverse Y-axis: 8,000 m/min, rapid traverse Z-axis: 8,000 m/min, table width: 610 mm, table length: 1,850 mm, table load: 1,000 kg, 3-axis CNC machine (VMC) STYLE - BT 1500 MACH-ID 9263 Make: STYLE Type: BT 1500 Year: 2005 Closed housing Chip conveyor Under power X - Travel: 1500mm Y - Travel: 650mm Z - Travel: 650mm Table Length: 1850mm Table Width: 610mm Table load: 1000 Feed rate X-Axis: 8000mm/min. Feed rate Y-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 14kW Speeds / ranges: 6000Rpm ATC / revolver: 24 Number of controlled axis:3 Coolantsystem: Yes Length: 3100mm Width: 2300mm Kodpfxsxlgqko Afdodk Height: 2500mm Weight: 5300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters Kedpfewrp Emsx Afdodk - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: used, Year of construction: 1999, Used Capping Machine AROL KAMMA year 1999 Kdodpfxjvgt T Ee Afdjk Introduction to the AROL KAMMA 1999 Capping Machine Initially, the Used capper AROL KAMMA capping machine, launched in 1999, symbolizes efficiency and precision in packaging. Remarkably, it processes up to 7000 bottles per hour (BPH), exemplifying high productivity. Its design, notably featuring six capping heads, not only promotes high throughput but also ensures versatility. Furthermore, the machine’s ability to handle T-caps expands its use across various formats, making it an indispensable asset in bottling. Advanced Functionality for Optimal Performance Significantly, this specific capper is marked by advanced features. Its adjustable-height capping head, a key element, allows adaptation to different bottle sizes and shapes. Consequently, this flexibility maintains consistent capping quality across production lines. Moreover, the cap distribution system, using an innovative cellular centrifugal distributor, guarantees a steady cap supply. This aspect is essential for maintaining the impressive 7000 BPH output, ensuring uninterrupted production. Safety Features and Robust Design In terms of safety, the AROL KAMMA is exceptionally well-equipped. It includes comprehensive safety measures to prevent accidents and protect operators. Additionally, its construction with high-grade stainless steel isn’t just durable; it also eases cleaning and maintenance. This robust design is vital for continuous operation at high speeds, especially crucial given the substantial 7000 BPH output. Operational Flexibility and Efficiency Regarding operational flexibility, the AROL KAMMA excels. Its speed can be precisely adjusted using an inverter, allowing pace customization for specific production needs. This adaptability ensures seamless integration into various bottling lines with differing speeds and configurations. Also, the bottle entry, designed for left-hand (clockwise) flow, fits a wide range of production setups. Conclusion To conclude, the 1999 KAMMA capping machine, capable of handling 7000 BPH, is a superior choice for demanding bottling needs. It combines speed, precision, adaptability, and safety, making it essential for businesses aiming to boost bottling efficiency and reliability. Lastly, the machine’s lasting design and advanced technology make it a wise investment for companies.

Condition: used, Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10,800 cph represents indeed a reliable and efficient solution for industrial bottling operations. Equipped with specialized and high-quality equipment, this line is meticulously designed to maximize productivity and ensure in fact optimal results. CFT Empty Can Twist Rinser- Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans. Moreover, with its dual can rinser system and spare parts sets for 0.35L  and 0.47L aluminum cans, it ensures flexible operation tailored to specific production needs. Additionally, the rinse process guarantees pristine can surfaces, vital for maintaining product integrity. CFT 20 Valve Can Filler – Seamer of the Used filling line CFT for cans up to 10800 cph The 2013 model RS20 CFT 20-valve can filler with seamer ensures precise and rapid filling of cans. Featuring advanced technology and integrated sealing, it guarantees hermetic and secure closure for product preservation and quality. Furthermore, the filler’s seamless integration with the seamer streamlines the production process, minimizing downtime and maximizing efficiency. Conveyor & Automation Stainless Steel Full Can Conveyors The conveyor and automation system of the Used filling line CFT for cans up to 10800 cph includes stainless steel conveyors, facilitating without a doubt efficient transport of cans along the production line. Robust and reliable, it ensures continuous and uninterrupted flow. Additionally, the conveyor’s modular design allows for easy customization and expansion to meet evolving production demands. Carleton Helical Technologies Can Invert / Re-vert System Ksdpfewbfh Nsx Afdsdk The Carleton Helical Technologies can invert/revert system ensures a seamless and uninterrupted flow along the production line, thereby optimizing efficiency. Furthermore, the system’s innovative design minimizes the risk of jams or blockages, enhancing overall operational reliability. Videojet Ink Jet Coder The Videojet ink jet coder ensures clear and precise marking on each can, enhancing traceability and quality control measures. Moreover, the coder’s high-speed capabilities enable swift marking without compromising accuracy, contributing to streamlined production processes. In-Line Pressure Sensitive Wrap Around Labeler The in-line pressure-sensitive wrap-around labeler of this CFT Canning Line, specifically the Paradigm 700 model, ensures swift and accurate label application, enhancing product presentation and brand visibility. Additionally, the labeler’s adaptable design accommodates various label sizes and shapes, providing versatility for diverse packaging requirements. Stainless Steel Flow-through Conveyor Table The stainless steel flow-through conveyor table with a plastic mattop belt of the CFT Canning Line guarantees continuous and uninterrupted flow along the production line, facilitating smooth operation.