Used Wmw 800X300 for sale (1,145)

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m Bwedpfoxu Dxqjx Ahmsu -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Technical details: table load: 3 t table diameter: 1280 mm table rotating: 0-180 Grad table - inclinable: nein / no Grad machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. Bwodoxz E Exopfx Ahmou *

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! * Bsdpfxex Adbns Ahmowu

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm Bjdpfxjx Afn Ne Ahmewu

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Bwjdpfxsyuvcij Ahmju Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Year of construction: 1976, Technical details: table surface area: 1300 x 190 mm range of revolution per miute: 60 - 4000 Stufenlos U/min feed continuous: Pinole: 0,06 / 0,12 / 0,24 mm/U quill stroke vertical: 140 mm spindle taper: SK 40 spindle head swivable left - right: 90° und 45° ° total power requirement: 3,0 kW weight of the machine ca.: 1620 kg machine dimensions LxWxH: 2,7 x 2,3 x 2,4 m Bwjdpfx Aou Sq Emjhmsu Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Equipment 3-way measuring display Mitutoyo with beam machine lighting Coolant tank with pump X- and Y-axis feed adjustable incl. accessories comparable to the picture *

Condition: used, Year of construction: 2004, Technical details: feed pressure: 9,75 bar liter capacity: 10,1 l Bwsdpfou Szluox Ahmsu total power requirement: 5,5 kW volume capacity: 10,1 m³/min. Number of working hours: 26071 h revolutions per minute of the motor:: 3000 U/min. protection class: CE 0038 machine weight approx.: 310 kg dimensions L x W x H: 1,2 x 0,6 x 1,0 m Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is. *

Year of construction: 1990, condition: used, Technical details: voltage: 380 V / Hz weight: ca. 0,1 t dimensions L x W x H: 0,75 x 0,80 x 1,8 m Stationary welded steel construction Type 80 mm steel profile Application: Separation of mineral materials (sand) according to grain size operation by vibration 3x attachments Ø 610mm 1x separation pipe Ø 100mm attachment feeding screen Ø 580mm grain size 4mm Additional sieve inserts 5mm and 3mm are optionally available for 150.00 Euro per sieve. Bedpfx Aou Tr Trjhmjwu *

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min Bjdsu T Navopfx Ahmjwu feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Year of construction: 2022, Technical details: rated capacity: 28 kVA drive motor: 24 kW Number of working hours: 0 h type of fuel: Diesel voltage: 400 V Bwedpsu U E H Usfx Ahmeu weight of the machine ca.: 1060 kg dimensions L x W x H: 2,2 x 1,0 x 1,3 m The generator is silent. NEW Engine: 4-cylinder; type Cummins 4B3.9-G2; 1,500 rpm; output power 24 kW; tank capacity 120liter; fuel consumption: 238 g/kWh rated power and 226 g/kWh standby power. Cooling system and battery 12Volt Generator: Type TAL-A40-G; voltage 400Volt; 1,500 - 1,800 rpm; current 40Ah; power max. at standby power=28kVA and primary power=25 kVA. Accessories: Service box see photo *

Condition: used, Year of construction: 2022, Technical details: rated capacity: 28 kVA drive motor: 24 kW Number of working hours: 0 h type of fuel: Diesel Bodpfju U E Nvox Ahmewu revolutions per minute of the motor:: 1500 - 1800 rpm motor capacity: 24 kW voltage: 400 V weight of the machine ca.: 1060 kg dimensions L x W x H: 2,0 x 1,0 x 1,3 m The generator is silent. NEW Engine: 4-cylinder; type Cummins 4B3.9-G2; 1,500 rpm; output power 24 kW; tank capacity 120liter; fuel consumption: 238 g/kWh rated power and 226 g/kWh standby power. Cooling system and battery 12Volt Generator: Type TAL-A40-G; voltage 400Volt; 1,500 - 1,800 rpm; current 40Ah; power max. at standby power=28kVA and primary power=25 kVA. Accessories: Service box see photo *

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min Bwsdou U E T Ispfx Ahmju spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Bjdpfxsu U Iixo Ahmewu Hose package 7.4 meters Ground clamp and ground cable 4.2 meters *

Condition: used, Year of construction: 1996, Technical details: x-travel: 2500 mm y-travel: 560 mm z-travel: 600 mm control: TNC 426 CA bore capacity in steel (diameter): 400 cm³/min Max. Milling-capacity: 400 cm³/min tool changer with: 34 Plätze Tool pull-in force: 12 kN spindle taper MT: SK 40 spindle throat: 580 mm Revolution per minute: 20...7500 steples U/min. max. torque on the spindle: 210 Nm distance spindle nose and table: 0 - 600 mm feed:: X/Y/Z = 1 - 24.000 steples mm/min. rapid traverse:: X/Y/Z = 24 steples m/min feed power: X/Y = 6 kN und Z = 8 kN kN table-size: 3300 x 500 mm table load capacity - central/maximum: 2500 kp interface: ja Bwjdpfjvad Hpex Ahmou total power requirement: ca. 43 kW Weight approx.: 14,4 t dimension machine approx.LxWxH: 3,05 x 5,6 x 3,0 m dimension swarf conveyor LxWxH: 6.6 x 0,6 x 1,3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design. with integrated coolant supply link belt chip conveyor MAN+HUMMEL with cooling water tank and pump cooling lubricant treatment ALLWEILER AG, size L:1550 x W: 1000 x H:1200mm; filter belt width 500mm; pressure 30bar Hydraulic unit Machining area can be partitioned, partition wall available *

Condition: used, Technical details: floor-plate length: 4500 mm plate width: 1250 mm plate height: 250 mm Bodpjval Hdsfx Ahmswu Plate thickness: 250 mm weight of the machine ca.: 3,6 / pro Platte t transport dimensions LxWxH: ca. 4,5 x 1,3 x 0,3 / pro Platte m There are 2 plates for sale. Material: Cast steel T-slots according to DIN 650 a=21; h=40; b=39.5; c=16mm; center distance T-slot to T-slot = 250mm *

Condition: used, Year of construction: 1998, Technical details: x-travel: 820 mm y-travel: 280 mm z-travel: 410 mm spindle taper ISO: SK 40 distance table/horizontal spindle: min. 30 / max. 440 mm cross rail adjustment - horizontal: 650 mm range of revolution per miute: 40...2000 / 18step U/min swival range +/-: bei 90°: 360° und bei 45°: 360° Grad clamping surface area: 1120 x 250 mm table swivable approx.: 45° rechts / links feed:: X/Y: 12,5 - 830 + Z: 5,2 - 260 mm/min rapid traverse: X/Y: 2500 und Z: 1040 mm/min. total power requirement: 10 kW machine weight approx.: 2000 kg dimension machine xH: 2,2 x 1,8 x 1,7 m Ausstattung: 2x Gegenlager Ø 55mm Kühleinrichtung: Pumpe und Zuführung Bedienung über 3-Wege Messsystem ACU-Ride und Bedientafel Bwedpfjva Ei Ssx Ahmsu Maschinenfüße *

Condition: used, Technical details: x-travel: 762 mm y-travel: 382 mm Bodpsva Evfofx Ahmswu z-travel: 419 mm tool taper: Sk 40 table surface area: 1070 x 230 mm range of revolution per miute: 60 - 4.200 U/min feed continuous: 0,038/0,073/0,120 in 3 steps mm/min spindle stroke: 120 mm spindle taper: Iso 40 spindle head swivable left - right: 90 ° weight of the machine ca.: 1600 kg machine dimensions LxWxH: 1,8 x 1,5 x 2,15 m This machine is currently in the technical department. *

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm Bwjdovbgr Rspfx Ahmju grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V Bwedpfxsvc Akle Ahmsu control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Bwsdpfxsvc Amte Ahmeu Equipment: Drain with rollers for clippings 2x protective grid *

Year of construction: 2005, condition: used, Technical details: workpiece length: - mm workpiece height max.: - mm workpiece width - max.: - mm basket dimensions: 840 x 540 mm heating capacity: 650 W filling amount: 80 -120 l frequency range: 50 Hz connection voltage: 230 V Bwodpfx Aeyzhnlohmju temperature range: 15 -48 °C power consumption: 700 W lifting capacity in kg: 250 kg weight of the machine ca.: 60 Kg dimensions L x W x H: 1,1 x 0,97 x 6,9 m Bio-Circle Maxi Cleaning System – a high-quality industrial parts washer for efficient and environmentally friendly cleaning of components. Biological cleaning system – without aggressive chemicals Continuous operation possible (self-cleaning fluid) Integrated heating for optimal cleaning performance Cleaning directly via brush with fluid supply Ideal for workshops, industry, mechanical engineering & automotive *

Condition: used, Year of construction: 1982, Technical details: Bwjdoyzpknspfx Ahmsu dimensions of saw-band: 3920 - 4050 mm throat: 500 mm workpiece height: 400 mm table - inclinable: 15 - 30 Grad Cutting height: 400 mm band speed: 15 - 940 m/min Table dimensions: 800 x 820 mm mm machine weight approx.: 1000 kg dimension machine approx.LxWxH: 1,3 x 1,3 x 2,2 m

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm Bwodpfx Asy Emfwohmju longitudinal traverse (z-axis): 176 mm control: Fanuc 21T range of revolution per miute: 20 - 6300 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 kW electrics - voltage/frequency: 400 / 50- 60 V/Hz Weight approx.: 1,0 t dimension machine approx.LxWxH: 2,2 x 1,0 x 1,62 m The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria). It is positioned in the mid-range performance and size segment and is frequently used in training, workshops, and production. It is particularly designed for the precision machining of small parts, shafts, and chuck components. Automatic chuck Interface for bar feeder available Various accessories *

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. Bwsdpfjy E Hynox Ahmou *

Condition: used, Year of construction: 2025, Technical details: content: 1000 cbm capacity in bar: 11 total power requirement: - kW tank capacity: 1000 l operating pressure: 11 bar dimensions of the machine approx. HxWxD: 2,32 x 0,8 x 0,8 m weight: 260 kg • Function: Serves as a buffer and storage medium in compressed air stations, separates condensate, and reduces the frequency of compressor cycling. • Quality standards: Manufactured in accordance with the European Pressure Equipment Directive (2014/68/EU) or 2014/29/EU (simple pressure vessels) as well as the AD 2000 guidelines. • Surface protection: Typically hot-dip galvanized inside and out in accordance with DIN EN ISO 1461 for maximum corrosion protection and durability. Bwjdpjy I Rr Tefx Ahmsu • Operating data: Designed for temperatures typically ranging from -10 °C to +50 °C (in some cases up to +80 °C) and a standard operating pressure of 11 bar with a test pressure of 16 bar. • Design: Vertical design with welded longitudinal and circumferential seams. *