Used Tube-6020V-6Kw for sale (2,190)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round Bsdpfozzhfujx Ahmodh * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: ready for operation (used), Year of construction: 2023, laser power: 120,000 W, This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with 120 W power and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information. • Work area: 610 x 305 mm (24" x 12") • Maximum material thickness: 10 mm (varies by material) • Laser power: 120 W • Repeatability: ±0.01 mm • Resolution: 1,000 dpi • Control software: JobControl® Vision Bdjdpfx Ahjx I S Nyemsh • Material handling: removable table for thick objects • Exhaust system: integrated extraction system • Connectivity: USB, LAN • Supported materials: wood, acrylic, plastics, glass, leather, paper, textiles, and more • Cooling: air-cooled laser tube • Interface: color touchscreen • Safety features: protective cover with interlocks Technical Specification Engraving Speed 3000 m/s

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7385, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Transfluid, controller model: IPU 20, pipe diameter (max.): 648 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 180 °, bending radius (max.): 125 mm, bending radius (min.): 50 mm, working width: 6,000 mm, mandrel length: 5,500 mm, number of axes: 3, working height: 1,300 mm, table length: 7,000 mm, table width: 900 mm, table height: 1,300 mm, overall weight: 1,000 kg, total length: 7,000 mm, total width: 900 mm, total height: 1,300 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 1,320 l, operating pressure: 200 bar, Equipment: documentation/manual, emergency stop, Bending software requires a new update. Bending mandrels are available, bending tools are not included. Bedpsxcxupsfx Ahmsdh

Condition: used, functionality: fully functional, Year of construction: 2014, USED 150T HYDRAULIC PRESS BRAKE, SAHMATO AP1520-150. Bdodpfx Aezh Em Ajhmoh

Condition: like new (used), overall weight: 6,400 kg, maximum load weight: 650 kg, load capacity: 500 kg, Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. Suspension: Rigid type centrifuge on inertia plate. Lid: with 3 manual opening closures, lid opening by means of a hydraulic piston (includes hydraulic power unit), a flat sight glass, an inclined sight glass, cake scraper, N2 inlet fittings and with washing tube and loading tube connections Bdjdporrwdbefx Ahmeh Transmission: 37 kW ATEX electric motor Securities: pneumatic lid opening safety piston, lid safety piston detector. lid open detector. detector for tachometer on machine and motor (includes connection box)

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. Bdodpfx Ahsy Auhzomeh * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: used, color: black, loading space volume: 10 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 750 mm, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, lashing eyes Bedpfx Ahsz Aurdemodh Body: Roll-off container with a drivable tilting flap, approx. 10 m³, roll-off container approx. 10 m³ according to DIN 30722-1, with tilting flap, spring relief (bottom plate of the tilting flap made of 4 mm checkered plate) Internal dimensions: 6,000 mm x 2,300 mm x 750 mm Sheet thickness 5/3, 1 side rail per side, floor/wall 45 degrees, external stringers: floor/wall reinforced 90 degrees, stringer spacing 750 mm, end profile tube 89.9 mm, 6 lashing eyes on the wall (3 per side) RAL 9005 Deep Black ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2025, functionality: fully functional, BAYKAL LASER TUBE CUTTING MACHINES: BLT 2D or 3D cutting, from 1 kilowatt to 6 kilowatts, laser tube cutting machine for superior quality, no need for sawing, drilling or deburring. BAYKAL BLT 2D or 3D Lasertubes is a fast and flexible tube laser cutting machine with 6 meters and 8 meters size options and a cutting option XXL pipes up to 220 millimeters and rectangular tubes up to 220 by 220 millimeters , wall thicknesses of up to 10 millimeters for mild steel. Important technical information for BAYKAL BLT 2D or 3D Lasertubes; Maximum outside diameter of round tube in millimeters: 220 Maximum outside dimensions of rectangular tube in millimeters: 220 by 220 Maximum workpiece weight in kilogram/meter: 70 Technical specifications for loading; Load 1 ( front rear ): Bundle Load 2 ( front rear ): Semi auto load Load 3: Manual Minimum loading length (meter): 2 meters Maximum unloading length (meter): 4 - 6 meters Bundle loading capacity (kilogram): 3500 kilogram Technical specifications for unloader; Three programmable positions, rear conveyor belt and motorized front and rear collection tables. Unloading length (meter): 4 - 6 meters Bodpfort Hurjx Ahmedh

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 * for three-axle unit with 385/65 R22.5 tires * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Bodpezz Umxjfx Ahmedh Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stanchio

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction Bdodpex Hvqfefx Ahmeh -Type: 63100 -Drive: 1.6 kW -Volume flow rate: 340 m³/h -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Condition: used, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 0872101270802, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser hours: 6,000 h, laser power: 3 W, pipe diameter (max.): 152 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 23 kg, type of cooling: water, overall weight: 23,900 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Model: ADIGE / BLM GROUP LT7 Machine Type: Automatic 3D fiber laser tube/profile cutting machine Laser Source: Fiber laser Laser Power: 3kW Cutting Diameter: Ø12 – Ø152.4 mm 3D Cutting Head: BLM GROUP 3D Tube Cutter Max. Profile/Bar Weight: 23 kg/m Minimum Loadable Length: 1900 mm Max. Loadable Length: 6500 mm Automatic Loading: Yes Bundle Loading: Yes Single Profile/Bar Loading: Yes Max. Bundle Loading Capacity: 5,000 kg Automatic Unloading: Yes Unloading Position: 3 programmable positions Unloading Length: 6500 mm Processable Materials: Carbon steel, stainless steel, aluminum, copper, brass Standard Configuration: 6500 mm loading + 6500 mm unloading Machine Weight: Approximately 23,900 kg (including fume extraction system) Bdedpfxszzzb Ae Ahmsh Average Power Consumption – O₂: 15 kW Average Power Consumption – N₂: 20 kW

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm Bdjdpfjphmxrox Ahmoh - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-C2 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm Bdedpfxoh Hfphj Ahmjh - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w Bodpfjg I H Ntsx Ahmsdh X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w Bdsdog D Ntqopfx Ahmoh X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland Bsdpfxeyut Dks Ahmedh

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Bjdpfjutz Uysx Ahmjdh Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Control cable for lift axle from the driver's cab Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1850x-travel: 2020y-travel: 6050Laser performance: 6precision of position: 0,05repeat accuracy: 0,03weight approx.: 16000messurements (LxWxH): 13200 x 2800 x 2300Table change time: 15Maximum speed: 120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Bdodpfstwtnzex Ahmjh Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: ready for operation (used), functionality: fully functional, !!! We have two units in stock. Price is for one unit only !!! Bjdpfx Asz Dhl Rehmjdh 🔄 Shaking & Drive System * Speed Range: 25 to 400 RPM (maximum 300 RPM when units are stacked). * Shaking Orbit: 3/4 inch (1.9 cm) circular orbit is the standard configuration (some documentation notes 1-inch or 1/2-inch options depending on the exact sub-model code). * Drive Mechanism: Triple-eccentric counterbalanced drive powered by a maintenance-free, brushless DC motor. 🌡️ Temperature Control * Temperature Range: 4°C (or 20°C below ambient temperature) up to 75°C (for 50 Hz units) or 80°C (for 60 Hz units). * Control Accuracy: Ambient temperature can be set in 0.1°C increments with a control accuracy of ±0.1°C. * Refrigeration: Hermetically-sealed 1/5 HP compressor using CFC-free R134A refrigerant. 📐 Capacity & Dimensions * Overall Dimensions: 24.4" W × 28.7" D × 36.4" H (62 cm × 73 cm × 92.5 cm). * Internal Chamber: 20.5" W × 20.5" D × 24.8" H (52 cm × 52 cm × 63 cm). * Platform Size: 18" × 18" (46 cm × 46 cm) standard universal or dedicated platforms. * Flask Capacity: Accommodates glassware ranging from 10 mL up to 6-liter Erlenmeyer flasks. * Static Incubation: Includes 2 height-adjustable stationary shelves for incubating Petri dishes or test tube racks without shaking. * Net Weight: Approximately 300 to 360 lbs (136 to 163 kg) depending on options. ⚡ Electrical & Utility Features * Power Requirements: 240V versions (50 Hz), up to 1500–1800 VA maximum power consumption. * Timer: Continuous or programmable from 0.1 to 99.9 hours. * In-Chamber Outlet: Internal, moisture-resistant electrical outlet to power secondary equipment inside the chamber. * Safety Features: Automatic shaker shut-off when the door is opened, independent over-temperature thermostat, and audible/visual alarms for speed and temperature deviations. Good working condition. Please check out our other listings as well.

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Completely Overhauled – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005. This machine will undergo a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good technical and optical condition and will be ready for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Completely Overhauled Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Work Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 will undergo a comprehensive and professional overhaul in our facility. As part of the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally repaired or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol Bedpfsz Atdrex Ahmedh * Thorough cleaning of the entire machine base * Cleaning of the entire work tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul is completed ## Quality Inspection and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality inspection. This includes, in particular, a detailed erosion test according to the quality and testing requirements of OPS INGERSOLL. This test will verify the relevant machine functions as well as the accuracy and process reliability. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit will be immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large work area, this machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively overhauled wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: 2026BD25, bending angle (max.): 190 °, overall weight: 1,000 kg, total length: 1,800 mm, total width: 850 mm, total height: 1,230 mm, power: 8 kW (10.88 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, control cabinet height: 1,200 mm, Single - Head Servo CNC Pipe Bending Machine BD25CNC3A1S Machine Model: BD25CNC3A1S Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Maximum Bending Pipe Diameter × Wall Thickness (Normal Steel, Aluminum, Copper etc.) Φ25mm×1.2mm Maximum Bending Radius R150mm Maximum Bending Angle 190° Maximum Feeding Length 1200mm Working Speed: Bending Speed Max. 150°/s Working Speed: Pipe Rotating Speed Max. 200°/s Working Speed: Feeding Speed Max. 1000mm/s Bedpfx Aheyak E Nemsdh Working Precision: Bending Precision ±0.1° Working Precision: Pipe Rotating Precision ±0.1° Working Precision: Feeding Precision ±0.1mm Data Transmission Mode 1. Coordinates (X.Y.Z) 2. Working Values (Y.B.C) Bending Mode Servo Bending

Condition: like new (used), Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: SG202640, total length: 1,500 mm, power: 4 kW (5.44 HP), overall weight: 650 kg, total width: 800 mm, total height: 1,150 mm, input voltage: 380 V, warranty duration: 12 months, Pipe Shrinking, Profile Forming Machine SG40NC Machine Model: SG40NC Product Description: Microcomputer-controlled and hydraulically driven. Equipped with a mobile foot switch featuring three functions: automatic operation, emergency stop, and continuous emergency stop, ensuring high safety. Bdedpfxsyak Iko Ahmoh Capable of multiple processing methods including tube Forming, tube expanding, tube end blunting, and bulging. Processed shapes include concave-convex joints, elongated, flat, square, flared, angled, V-shaped, open elbow, etc. Molds can be changed according to the user’s processed products. Mold replacement is simple and convenient, facilitating flexible production. The machine has a compact and sturdy structure, uses hydraulic power, operates stably with a high yield rate, minimal vibration, and low noise. It can perform tube end reduction, expansion, bulging, upsetting rib forming, and other shape forming processes. Suitable for processing various shapes at the connecting parts of pipe fittings (for insertion), automotive oil pipes, air ducts, water pipes, and air conditioning pipes. Maximum Tube Forming Capacity mm Ø40×2mm Maximum Tube Forming Length mm 100mm Motor Power kW 4 Weight kg 600

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD38NCCOMP, bending angle (max.): 190 °, overall weight: 900 kg, total length: 3,100 mm, total width: 950 mm, total height: 1,500 mm, power: 6 kW (8.16 HP), input voltage: 220 V, type of input current: AC, warranty duration: 12 months, Semi-Automatic Single-Head Hydraulic Pipe Bending Machine BD50NC2A Machine Model: BD38NCCOMP Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces. Bodpfx Aheya An Njmodh  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Specification The largest applicable carbon steel pipe (bending radius ≥ 2d) Φ38×2.0mm (thickness Max. 2.0) The largest applicable stainless steel pipe (bending radius ≥ 2d) Φ38×1.5mm (thickness Max. 1.5) Maximum core length (*) 850mm Critical Parts and Functional Components Maximum bending radius (*) 320mm Maximum bend angle 190° The number of bends that can be set for each pipe fitting (*) 25 bends The number of pipe fitting files can be set 280 sets (extensible) Working speed bending speed Max.90°/s Machine tool bending angle ±0.1°

Condition: excellent (used), Year of construction: 2022, operating hours: 54 h, functionality: fully functional, machine/vehicle number: 3W2I324202513, Equipment: charge status display, lighting, ALIEN-X The latest C-arm version introduced to the market in January 2019 (our unit manufactured in 2022). The system is designed to have a working performance similar to an angiography unit or a stationary hemodynamics unit; therefore, it will not be affected by the high temperature of the X-ray unit or other components. The C-arm movement is both motorized and manual. Isocentric active anti-collision system geometry on the FPD and X-ray side. Bodsz Dft Eepfx Ahmodh Compact and stable with a perfectly balanced C-arm, which is safe for all movements. Excellent maneuverability thanks to two large anti-static steering wheels. Latest generation start & stop system with excellent ergonomics and easily recognizable (color-coded) steering wheels. Durable cable connections between the C-arm and the trolley, resistant to mechanical damage, special paint for quick cleaning and disinfection. Generator power: 25kW Detector: 3030 X-ray tube: dual focus 0.3-0.5 mm Anode speed: standard and high speed available Control console: no. 2 synchronized ETS15-18 (on the C-arm and on the trolley) ETS15-18: real-time images and reference images displayed C-arm movements: manual – motorized – hybrid C-arm position storage: no. 4 arbitrary positions Anti-collision systems: active systems on both the FPD and X-ray tube side Adjustable monitor: 4K Small-sized trolley: separate from the C-arm Foot pedal New EPB power supply systems X-ray tube Alien X uses the latest generation of X-ray tubes with a titanium, zirconium, and molybdenum (TZM) plate. The advantages compared to using pure molybdenum plates are: better resistance to deformation, higher recrystallization temperature, and higher thermal resistance. Anode capacity 400 kHU 104 kHU/min anode dissipation High anode rotation speed Dual focus 0.3-0.5 mm 1200 W dissipation in the housing WAD + EHC WAD (Water Aided Dissipation): X-ray tube cooling system; through the combination of dielectric oil management within the radiology complex, coolant, and an advanced heat exchanger, there are no fans in the sterile field. EHC (Eurocolumbus Heat Control): real-time control of the heat generated with immediate actions to change frames/s and/or pulses and/or imaging and radiological parameters to ensure optimal system operation and avoid overheating. Manual with motorized drive – HYBRID The Alien X C-arm movement can be done both manually and with a motor; manual movement is easy, and the system can be operated simply and ergonomically thanks to dedicated handles. Hybrid movement allows the combined use of both movements. Motorized horizontal movement is also available as an option. This option is mandatory if the EIC package is required. EPD anti-collision system However, it should not be overlooked that a flat detector must have certain important features, regardless of the technology used, namely: 16-bit DQE ≥ 75% MTF ≥ up to 55%

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • 2 units available, identical machine • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm Bjdpfx Asyvz Ibshmjdh • Max turning length: 900 mm • X1 travel (upper slide): 300 mm • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar