Used 4-Side Brushing Machine F. Windows Doors for sale (117,370)

Year of construction: 2025, condition: new, Valmec 600 Brush Deburring Machine working width: 600 mm feed rate: 4-12 m/min Ljdpegk T Etofx Ammshh motor power: 2 x 4 kW includes two brushes: wire brush + abrasive brush independent height adjustment of the brushes power supply: 400V machine: New

Condition: new, Year of construction: 2025, Valmec Master 400 brushing and aging machine working width 400 mm maximum working height 300 mm 2 x 3 kW motors conveyor belt with adjustable speed via frequency inverter includes steel brush + nylon brush 2 x 100 mm dust extraction outlets independent height adjustment of the brush heads Lhodpsgmm Sasfx Ammoh dimensions: 1300x900x1600h mm machine weight: 500 kg

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Lhsdpfx Amjvw Ev Hsmsh Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one of the plate edges Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition Lsdpfx Aeh Uhq Dsmmehh

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Disc spacing 1470 mm Working height 550 mm Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg Lhsdpfodzqmhjx Ammjh Good condition

Condition: new, Year of construction: 2023, No. 04377 Brushing and structuring machine VOLPATO SPO 600 Year of construction 2023, new, immediately available, made in Italy VOLPATO has been building grinding machines for over 60 years Working width 600 mm Machine open at the side for double pass and double grinding width of 1200 mm Electric height adjustment of both units independently of each other Maximum grinding height 330 mm (360 mm) depending on brush diameter both brushes tilt 0-10° (20°) Maximum diameter of brushes 320 mm Brush rotation infinitely adjustable 180 - 600 rpm Change of direction of rotation of the brushes possible Electric height adjustment 0 - 330 mm with Siko indicators Brushes are stored on round bars with a diameter of 90 mm each with linear guides Ljdsqrtv Repfx Ammshh Infinitely adjustable feed speed of the conveyor belt Table height thanks to adjustable feet 800-850 mm Suction nozzle 2 x 180 mm EMERGENCY STOP BUTTON Motor power of the grinding units 2 x 4 kW Motor power of the conveyor belt 0.55 kW Table dimensions 2000 x 860 mm Includes 1 steel wire and 1 Tinex plastic brush, each 250 mm diameter, 80 grit NET WEIGHT 700kg CE declaration of conformity Operating instructions in English Brush units inclined up to 20 ° with respect to the direction of movement = when the wood rusts, the veins are also highlighted transversely thanks to a helical action of the brushes The machine has 3 inverters, one for adjusting the belt speed and 2 for the brush units = many finishing configurations available Double direction of rotation of the brushes 4kW motors with belt transmission giving double torque to the brush units The images serve as an example and represent an identical machine Transport dimensions approx. 2100 x 1300 x 1900 mm LWH Weight 750kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold in AS IS condition According to the manufacturer, the warranty is 1 year after delivery Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

Condition: used, Used cabinet door drilling machine with 8 drilling units on the right side and 4 drilling units with heads on the left side. Lodpfx Amey Ud Syemohh

Condition: good (used), Year of construction: 2004, Strapping machine, Mosca, RO-TR700-4 – used - : Price ex location: only €3,500 (net) ex location! Manufacturer: Mosca Model: RO-TR700-4 Year of manufacture: 2004 No.: 75151 Arch size: approx. 70 cm × H: 56 cm 3L-N-PE, 400V, 1.5 kW, 2.5 A, Control voltage: 24V DC Lhodpfx Amsyhxnxjmjh Strapping used – strap width can be changed with a conversion kit: Strap length: approx. 4,500 m per roll Strap width: approx. 8 mm Strap thickness: approx. 0.45 mm Core: approx. 200 mm Material: Polypropylene (PP) Colour: black Condition: good, cover sheet missing Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Lhjdpfxexz Hh Uj Ammsh Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: PUR Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Lsdpfxjyilxmo Ammjhh Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Ljdpfx Amoycu E Esmohh Height:2200mm Weight:2900kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, variable speed geared motor -Handover: in its current condition as inspected -Condition: Functional, without brakes -Manufacturer: Nord, adjustable geared motor -Type: SK 42 F-R210 U-112 M/4 BRE Ljdpjwl Uxlsfx Ammohh -Speed: 14.5-109 rpm -Engine: Type SK 112 M/4 BRE60 -Power: 4.0 kW -Protection rating: IP54 -Shaft: Ø 45 x 90 mm -Brake: 60 Nm -Dimensions: 840/580/H285 mm -Weight: 105 kg

Condition: used, Year of construction: 2010, machine/vehicle number: 4138, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,450 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 1,100 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 14, controller manufacturer: Siemens 840D, total height: 2,400 mm, total length: 4,900 mm, total width: 2,660 mm, tool diameter: 150 mm, tool length: 165 mm, tool weight: 5,000 g, number of tool stations in tool turret 3: 14, tool holder type of tool turret 1: HSK 63, Equipment: CE marking, documentation/manual, We are offering this used Hamuel Reichenbacher Primus 4-axis machining center with a drilling head (13 spindles, horizontal and vertical) manufactured in 2010. Manufacturer: Hamuel Reichenbacher Type: Primus Machine number: 4138 Lodpfx Aey Tww Hommehh Year of manufacture: 2010 4-axis machining center. The main spindle uses HSK63f. 14-position automatic tool changer (tool change time approx. 16 seconds) + pickup station with 2 tool positions. Horizontal and vertical drilling head directly next to the main spindle for drilling in the X+/- Y+/- Z direction, including 1 saw chuck for cutting in the X direction. Siemens 840D control. Tool clamping via a cross table with a vacuum chuck. Can be operated alternately / is currently operated in this way. Additional connections per clamping position: 2x vacuum, 2x compressed air, switchable. Software: Nc-Hops v5.5 with a license on a Hardlock dongle. Currently still in operation and available for inspection until the end of July 2026. Collection in August 2026. Includes a hard drive image Clonezilla (system backup of Windows/HMI/Hops). Sale price net. B2B sale only - used equipment sale - exclusion of any warranty. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 4 1. Saw cutting unit, Random System: Saw cutting head 2. Brush: Metal, diameter 220 mm 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power, saw cutting unit: 1.1 kW Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Machine length: 2800 mm Ledjhwrp Ropfx Ammjhh Machine width: 1500 mm Machine height: 1600 mm Weight: 1500 kg

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Ljdpfoi Hpk Uox Ammshh Units: 2 brush units, adjustable separately 1st brush: Scotch Brite Medium / Diameter 220mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220mm, variable speed drive Height adjustment: Handwheel Height indicator: mechanical counter Feed rate: 4 - 12 m/min Motor power, brushes: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Motor power, feed: 0.37 kW Machine length: 1400mm Machine width: 900mm Weight: 500kg

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, adjustable separately Lhsdpfx Amsi Ezrzjmeh Brush deflection height: 25 mm with pneumatic damping 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Right/left rotation: for both brushes Height adjustment: handwheel Height indicator: mechanical counter Feed rate: 4 - 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: not inspected (used), Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg Control MemoryPlus 1 WEINIG VARIOMAT Planing and Moulding Machine ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, Ledoy Spvfjpfx Ammohh the infeed roller returns to its starting position for the next workpiece. Additional Features: ----- MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-P...

Condition: good (used), Celaschi automatic double-sided tenoning machine 5 units per side Lhedpfx Aetykxpjmmjh

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0803024, functionality: fully functional, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Lhsdpsv Tzw Esfx Ammoh Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 83406, Window machining centre Weinig Unicontrol 10, year of manufacture 1998 Ledey Sxlpepfx Ammjhh

Condition: used, Number of boring spindles 5 St. Ledox Ecguspfx Ammjhh Working width 230 mm Working height 120 mm

Condition: used, Number of boring spindles 5 St. Lhjdpfx Amew R S T Asmeh Working width 250 mm Working height 160 mm

Condition: used, Number of boring spindles 4 St. Working width 230 mm Working height 120 mm Lodpfx Aow I Dcdsmmohh Feed motor 5,5 kW

Condition: used, Number of boring spindles 6 St. Working width 230 mm Working height 120 mm Lhedpfx Aew I A Sqommjh Length of the planing table 2.000 mm

Condition: used, Number of boring spindles 1 St. Lhodpfow Db H Tex Ammjh Motor output 1 kW turning speeds 33.000 U/min Hoffmann UAD 33-F dovetail milling motor.