Used Abel Hmd-G-50-500 for sale (66,968)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Nledpfxezcwylo Agrsg Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: good (used), Year of construction: 1996, machine/vehicle number: 54634, functionality: fully functional, operating hours: 51,997 h, power: 10 kW (13.60 HP), input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 3,500 kg, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, mount diameter: 40 mm, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle speed (max.): 15,000 rpm, spindle speed (min.): 10 rpm, Equipment: documentation/manual, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 50 V, year of manufacture: 1996, operating hours (h): 51,977, serial no.: 054 634, travels (X/Y/Z): 500/380/380 mm, machine on 21,341, max. spindle speed 15,000 rpm, tool holder SK40, Heidenhain control, chip conveyor, 24-fold tool changer, compact filter system INTERLIT SK200-760, year of manufacture: 21,341, max. spindle speed 15,000 rpm, tool holder SK40, Heidenhain control, chip conveyor, 24-fold tool changer, compact filter system INTERLIT SK200-760, year of manufacture: 1996, tank capacity 600 l, filter area 0.2 m² Nedpfx Agorkzyaerjlg

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: DN175501, 1x Abus VS column-mounted swivel crane, NL 500 KG Nodpfx Ajzv Hytsgrolg Load capacity at full extension: 500 KG / 0.5 tonnes Height: approx. 4 m (including base: 0.35 m) Outrigger length: approx. 3.7 m Reach: approx. 3.5 m Hook height: approx. 3.3 m Total weight: approx. 450 kg Including Abus chain hoist with floor control (2 lifting speeds) with swivel and trolley drive Connection to 400V, 16A, swivel range 360° Crane is disassembled and immediately available The gripper is not included! Item location: 75053 Gondelsheim Only the crane system shown in the pictures is sold. Very good condition, see pictures Shipping by freight forwarder or collection by appointment.

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Nsdpjyiz U Tjfx Agrolg Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,800 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, table load: 1,500 kg, overall weight: 6,500 kg, FGS 50/63 - TOS KUŘIM Knee-Type Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Push-Button Panel Digital Axis Readout System Completely Overhauled in 2025 Warranty: 12 months Availability: Immediately in stock CONDITION OF A NEW MACHINE – FULL REBUILD WITH GEOMETRIC ACCURACY PER MANUFACTURER SPECIFICATION FGS 50/63 – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Nedpoxpugnofx Agrolg Overall width: 3,350 mm Overall height: 2,500 mm Total weight: 6,500 kg Total power input: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Transverse travel Y-axis: 630 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,800 rpm Spindle motor power: 15 kW Max. spindle torque: 2,500 Nm Feed range X – Y / Z: Number of steps / range: 16/ 10 – 1,800/ 2.5 – 450 mm/min Rapid traverse: 4,000/1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,500 kg

Condition: new, Bernardo Production Lathe Goliath 500 x 2000 Technical Specifications Distance between centers: 2000 mm Center height: 250 mm Swing over bed: 500 mm Swing over gap*: 720 mm Swing over cross slide: 310 mm Bed width: 400 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range (24): 9 – 1600 rpm Longitudinal feed range (80): 0.063 – 6.43 mm/rev Cross feed range (80): 0.027 – 2.73 mm/rev Metric threads (46): 1 – 224 mm Inch threads (44): 1/8 – 28 tpi Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 3520 x 1240 x 1550 mm Weight approx.: 3375 kg * Removable gap section: 200 mm Features • Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. • Machine bed cast in one piece is extremely torsion-resistant and low in vibration, providing the essential requirement for precise turning • Modern main spindle bearing with precision angular contact ball bearings • Central, user-friendly control for feeds and threads, with lead and feed screw • Rapid traverse for longitudinal and cross feeds as standard, to reduce auxiliary times Nsdpfx Agjxl D Aqsrelg • Large dimensioned, hardened, and precision-ground gears • Removable gap bridge allows machining of large-diameter workpieces • Sliding tailstock for taper turning, handwheel with adjustable fine scaling (0.02 mm) • Electromechanical foot brake to minimize non-productive time • Excellent machining performance also in facing operations Scope of delivery • Slip clutch • Rapid traverse, longitudinal and cross • LED machine lamp • 3-axis ES-12 V digital readout with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 400 mm • Fixed steady rest – max. passage diameter 200 mm • Traveling steady rest – max. passage diameter 110 mm • 1 live center / 1 revolving center • Motor with magnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • Coolant system • Quick-change toolpost with 4 tool holders • Safety guard for quick-change toolpost • Reducing sleeve • Chip guard • Service tools

Condition: new, Bernardo Goliath 500 x 1500 Production Lathe Technical Specifications Centre distance: 1500 mm Centre height: 250 mm Swing diameter over bed: 500 mm Swing diameter over gap*: 720 mm Swing diameter over cross slide: 310 mm Bed width: 400 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (24 steps): 9 – 1600 rpm Longitudinal feed range (80 steps): 0.063 – 6.43 mm/rev Cross feed range (80 steps): 0.027 – 2.73 mm/rev Nodpjxl D Aksfx Agrolg Metric threads (46): 1 – 224 mm Inch threads (44): 1/8 – 28 TPI Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L x W x H): 3020 x 1240 x 1550 mm Weight approx.: 3285 kg * Removable gap bed section length: 200 mm Features • Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. • One-piece cast machine bed ensures maximum rigidity and minimal vibration, providing the essential prerequisite for precise turning • Modern precision angular contact ball bearing spindle bearings • Central, user-friendly feed and thread control, with lead and feed shafts • Rapid traverse in longitudinal and cross directions as standard to reduce idle time • Large-dimension, hardened and precision-ground gears • Removable gap bridge allows machining of large-diameter workpieces • Adjustable tailstock for taper turning, handwheel with fine graduation (0.02 mm) • Electromechanical foot brake to minimise non-productive time • Excellent cutting performance, even during facing operations Scope of delivery • Slip clutch • Rapid traverse longitudinal and cross • LED machine lamp • 3-axis digital readout ES-12V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 400 mm • Fixed steady rest – max. through diameter 200 mm • Follow rest – max. through diameter 110 mm • 1 live centre / 1 revolving centre • Motor with magnetic brake as per CE standards • Foot pedal with brake function as per CE • Initial fill with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Reducing sleeve • Chip guard (rear) • Operating tools

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: BE 05.20.1920, SHRINK TUNNEL KALLFASS COMPACT 650 S WITH FOIL PACKAGING MACHINE UNIVERSA 500 Commission No.: 25.156.72 Equipment / Additional information: WITH FOIL PACKAGING MACHINE UNIVERSA 500 (M. No.: M 05.20.1614 // Commission No.: 25.156.72) Technical Specifications Adjustable working height: 800 – 900 mm Tunnel opening width and height: 650 mm, 200 / 400 mm Length of heated tunnel hood: 1200 mm Power supply: 208 – 480 V Temperature: continuously adjustable up to 190°C Conveyor speed: 5 – 17.5 meters/minute Installed heating power: 13.5 kW Njdpfx Agsz D U N Asrslg Advantages Suitable for PE and PO films Maintenance-free plastic modular belt Consistent heat transfer for perfect packaging results Efficient energy recirculation via ring-nozzle heating technology High-quality insulation and compact design for rapid heat-up times Easy adjustment of basic parameters Constant operating temperature without extreme fluctuations Easy maintenance thanks to carefully selected components

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Nodpfx Agsylp Slorjlg Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2005, 1 used steam boiler Manufacturer: LOOS, Gunzenhausen Model: UL-S 2000 Capacity: 1,500 kg/h Nedpfx Agex Sxkforelg Max. permissible operating pressure: 13 bar Increased test pressure: 24.7 bar Total water content approx.: 3,315 l Year of manufacture: 2005 CE marking: CE 0036 Equipped with Weishaupt gas burner, separate control cabinet, gas control line, feed water pump, and the existing coarse and fine fittings.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 670 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 1,440 rpm, spindle speed (min.): 1,440 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,620 mm, total width: 3,475 mm, total length: 3,200 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, rotational speed (min.): 18 rpm, table load: 1,200 kg, overall weight: 6,500 kg, workpiece weight (max.): 1,200 kg, bed width: 630 mm, Console Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Control Panel Axis Digital Readout Complete Overhaul Performed in 2025 Warranty: 12 months Nlsdpfexp Itbjx Agreg Availability: IMMEDIATELY AVAILABLE CONDITION OF A NEW MACHINE – COMPLETE OVERHAUL IN GEOMETRICAL ACCURACY ACCORDING TO MANUFACTURER’S SPECIFICATION FGSV 50 – Technical Data: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 3,200 mm Overall width: 3,475 mm Overall height: 2,620 mm Total weight: 6,500 kg Total power consumption: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Cross travel Y-axis: 670 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,440 rpm Spindle motor power: 15 kW Max. spindle torque: 2,000 Nm Feed range X – Y / Z: Number of steps / range: 16 / 10 – 1,800 / 2.5 – 450 mm/min Rapid traverse: 4,000 / 1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,200 kg Details of the performed overhaul available upon request.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles Nedpfx Aszr Hgxsgrelg * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Year of construction: 1989, condition: good (used), machine/vehicle number: 3506, System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Nsdpfx Asdkdi Eogrjlg Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Nsdpfozrvg Usx Agrslg Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 155423, overall weight: 4,707 kg, fuel type: diesel, tank capacity: 597 l, color: red, power: 400 kW (543.85 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 400 kW (543.85 HP), nominal power (apparent): 538 kVA, continuous power: 400 kW (543.85 HP), continuous power (apparent): 538 kVA, total length: 4,100 mm, total width: 1,600 mm, total height: 2,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT/Iveco, type of cooling: water, fuel consumption (combined): 100.6 l/100km, fuel consumption (urban): 51.5 l/100km, fuel consumption (extra-urban): 70.63 l/100km, fuel: diesel, fuel tank capacity: 597 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 12 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 2,200 mm, control cabinet length: 4,100 mm, control cabinet width: 1,600 mm, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 500 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen. De efficiënte PFT/Iveco motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 597 liter heeft de generator een autonomie van maximaal 6 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. Technische Specificaties: - Model: Bredenoord 500KVA - Nom. vermogen: 538 KVA - Max. vermogen: 538 KVA - Motor: FPT/Iveco C13TE7 - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 220 538 kVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 80 dB(A) op 7 meter - Brandstoftank: 597 liter - Autonomie: - 100% PRP: 6 uur - 70% PRP: 8 uur - Motorvermogen:400 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 4.10 m x 1.60 m x 2.20 m - Gewicht: 4707 kg - Emissieklasse: Brandstofverbruik: - 100% PRP: 100,6 L/h - 70% PRP: 70,63 L/h - 50% PRP: 51,5 L/h Opties: - Motorverwarming - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Nledpswgkrkjfx Agreg Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 500 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 600 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: good (used), Year of construction: 2010, 8 compartments/support depth: approx. 215 mm per compartment Rail length: approx. 4100 mm Njdpjyhcyhjfx Agrolg Compact storage depth: 3400 mm Total height: 2730 mm Weight: 3280 kg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-275.0335 / L-288.0125, total length: 6,000 mm, total height: 3,800 mm, overall weight: 350 kg, Bystronic Swivel Crane with Suction Device Nljdpfxjz Dphgs Agrsg Bystronic Swivel Crane - Model: SSK2 - Year: 2015 - Height: 3800 mm - Arm Length: 6000 mm - Load Capacity: 500 kg Bystronic Suction Device - Model: EK 250 - Year: 2015 - Load Capacity: 250 kg - Weight: 80 kg - Pneumatically operated - 90° Tilting Disassembly and installation can be performed by our service team upon request. Immediately available.

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): Nsdpfx Ajwxygzogrslg X axis: 730 mm Y axis: 730 mm Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 500 mm, 2000 x 500 mm Nledpjy N Arzjfx Agreg

Year of construction: 2018, condition: excellent (used), Fully automatic production line for chocolate bars, made of stainless steel Manufacturer: GUSU Food Processing Machinery Year of construction: 2018 Condition: very good, little used The line consists of the following units: Chocolate bar production line, TPX-400, 400 V 3P 50 Hz, 40 kW 180° turning conveyor belt, TPX-400, 400 V 3P 50 Hz, 1.5 kW Elevator, TPX-400, 400 V 3P 50 Hz, 1.1 kW Straight roller, TPX-400, 400 V 3P 50 Hz, 0.75 kW Longitudinal cutter and distributor, TPX-400, 400 V 3P 50 Hz, 1.27 kW Single group roller, TPX-400, 400 V 3P 50 Hz, 1 kW Transverse cutter, TPX-400, 400 V 3P 50 Hz, 2.5 kW Chocolate storage tank, BWG500, 400 V 3P 50 Hz, 6 kW Chocolate conche, JMJ500, 400 V 3P 50 Hz, 9 kW Chocolate enrobing machine, TY J600, 400 V 3P 50 Hz, 21.38 kW Cooling tunnel evaporator I, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator II, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator III, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator IV, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator V, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator VI, TY J600, 400 V 3P 50 Hz, 0.75 kW Automatic packaging machine, SFC 2, 400 V 3P 50 Hz Nljdpfx Agezx Uz Dsrog The production line is 35 meters long. If you have any questions, please do not hesitate to contact us!

Condition: good (used), Year of construction: 2004, Max size of the book: 440/320/50 mm Min size of the book: 120/120/2 mm Max size of the cover: 660 x 440 mm Max speed (cycle/hour): 500 pcs Optimum thickness of the cover - cardboard 120 - 300 g/m2 Max milling of paper body - 3 mm Nledpfeu R E Elox Agrjg Working temperature of the glue 10 - 210°С Equipment: - hotmelt spine gluing unit - hotmelt side gluing unit

Condition: used, Year of construction: 2008, machine/vehicle number: MBxx-25, DEMAG KBK 2 - crane sky crane runway indoor crane Please ask your crane runway about your dimensions. Payload / lifting capacity from 80 125 250 500 to 1000 Kg Technical data of the system: Profile Demag KBK 1, 2L, 2 rails Also available as a monorail with curved sections, turntables and points! Mounting height variable The system can be delivered complete, including accessories such as: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. All sizes of chain hoists are optionally available Various facilities available. Very good used condition Rails available in yellow or red! Nedewq A Avspfx Agrelg Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 4218/ 12035, Axis height over bed: 1500 mm Speed: 0 - 315 rpm Nlsdpewqk Umefx Agreg Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 6000 mm D 66 – 85 mm L = 8000 mm D 86 – 105 mm L = 12,000 mm D 106 – 125 mm L = 16,000 mm D 126 – 200 mm L = 24,500 mm D 201 – 250 mm L = 24,500 mm D 251 – 555 mm L = 18,000 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Year of manufacture: 2006 Internal machine number: 4 Location: Netherlands Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Nedozw Dcnopfx Agrelg Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Spindle speed: 20 - 4,500 rpm Accessories: - Automatic door - Operating panel - Machine hood - Chip conveyor

Year of construction: 1985, condition: good (used), machine/vehicle number: 013125, Offer 21283 Technical data: - Grinding wheel diameter: approx. 500 mm - Grinding wheel width: approx. 50 mm - Grinding wheel bore: approx. 127 mm - Disc speed: 950 rpm Nsdpsi Daw Tjfx Agrolg - Drive: 400 V / 3.3 kW - Working height: approx. 800 mm - Working depth / safety guard depth adjustable - Connections for dust extraction hose: 100 mm - Space requirement: approx. W 1250 x H 1150 x D 650 mm - Weight: approx. 350 kg