Used Arburg Arburg 470C-1500-400With Multilift Robot for sale (7,383)

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00470, load capacity: 3 kg, arm reach: 580 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 120-3/0.6 manufactured in 2013.08. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 120-3/0.6 Model Number: IRB-120 Year of Manufacture Robot: 2013.08 Warranty term (months): 12   Payload (kg): 3 Reach (mm): 580 Repeatability (mm): ± 0.01 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 25   Controller: IRC5 Blsdpfx Ahoz Ag Uwomon Year of Manufacture Cabinet: 2013.08 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00529, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in 2014.04. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2014.04 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560 Bsdpfxoz Anlds Ahmoln   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2014.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: good (used), mileage: 100,616 km, first registration: 06/2016, fuel type: diesel, tire condition: 75 %, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2016, Equipment: ABS, air conditioning, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Disc brakes - Front suspension: Leaf - Radio - Rear suspension: Leaf = More information = Tyre profile: 75% Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Bedpjzcbrrjfx Ahmjln Rear axle: Double wheels Engine capacity: 1.988 cc Technical condition: good Visual appearance: good

Condition: new, Year of construction: 2024, Special offer: €42,000 (instead of €49,900), excluding VAT. Immediately available / Made in Italy Included premium features: - Heidenhain ND5023 3-axis position display - 5-position length stop for the carriage Bedpfx Aopq R Rdohmjln - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting - Set of leveling pads from Spinelli Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse - Air supply on the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free movement of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chuck guard with microswitch, turret plexiglass guard, rear guard covering the entire machine length, guard for leadscrew and feed rods, emergency stop button - Chip tray on wheels - Cooling system with electric pump - Central lubrication of the guides with automatic pump - Traveling and steady rest - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Optional features: - 3- / 4-jaw chuck Technical data: - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Compound slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 - Total weight: 3200 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 1,888 h, functionality: fully functional, overall weight: 1,070 kg, load capacity: 110 kg, arm reach: 3,010 mm, pivoting range: 360 °, input voltage: 500 V, input current: 38 A, type of input current: three-phase, Equipment: documentation/manual, 2x Comau C5G ACC3-E with Comau Smart-5 NJ 110-3.0 Robot Arm Bodpfxszzw Ufo Ahmsln Two industrial Comau robots, manufactured in 2018, offered as a complete set. Asking price for the complete set: €15,000 Operating hours: Robot 1 – C5G hour meter: 1,888:56 hours Robot 2 – C5G hour meter: 2,035:58 hours Controller specifications: Controller: Comau C5G ACC3-E Robot arm: Comau Smart-5 NJ 110-3.0 Protection rating: NEMA 12 / IP54 Controller weight: 125 kg Main switch interrupting capacity: 6 kA Interrupting voltage: 500 V Power supply: 400–500 V Phases: 3 Frequency: 50/60 Hz FLA cycle/max.: 15/38 A Transformer rating: 12 kVA Both robots are currently in operational condition. If you have any questions or require additional information, please feel free to contact us.

Condition: good (used), Year of construction: 2018, operating hours: 10,031 h, functionality: fully functional, machine/vehicle number: 667735, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,096 mm, This is a KUKA KR 210 R3100 ultra industrial robot with a KRC4 controller, manufactured in 2018. We would also be happy to offer you this robot as a fully refurbished unit! The controller includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech Bsdjz Duh Espfx Ahmsln

Condition: used, surface grinding machine Blodpoz Dubrjfx Ahmjn

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00653, load capacity: 125 kg, arm reach: 3,100 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/125L manufactured in 2016.11. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Bsdpfx Aoz Dz Hzehmoln Model: R-2000iC/125L Model Number: A05B-1333-B261 Year of Manufacture Robot: 2016.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3100 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1115   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.10 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00634, load capacity: 210 kg, arm reach: 2,696 mm, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA KR210R2700 Extra manufactured in 2016.11. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR210R2700 Extra Model Number: KR210R2700 Year of Manufacture Robot: 2016.11   Payload (kg): 210 Reach (mm): 2696 Repeatability (mm): Bledpfx Ahez Dz H Ijmsn Controlled Axes: 6-axis Installation Type: Floor Weight (kg): 1068   Controller: KRC 4 Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: KCP 4 Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00632, load capacity: 210 kg, arm reach: 2,696 mm, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA KR210R2700 Prime manufactured in 2016.11. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR210R2700 Prime Model Number: KR210R2700 Year of Manufacture Robot: 2016.11   Payload (kg): 210 Reach (mm): 2696 Repeatability (mm): Controlled Axes: 6-axis Installation Type: Floor Weight (kg): 1111   Controller: KRC 4 Year of Manufacture Cabinet: 2016.11 Bledpfx Ahoz Dz H Usmsn RCC Length (m): 7   Teach Pendant: KCP 4 Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00675, load capacity: 7 kg, arm reach: 717 mm, controller manufacturer: R-30iB Mate, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC LR Mate 200iD manufactured in 2016.11. The robot comes with an R-30iB Mate controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: LR Mate 200iD Model Number: A05B-1142-B202 Year of Manufacture Robot: 2016.11 Warranty term (months): 12   Payload (kg): 7 Reach (mm): 717 Repeatability (mm): ± 0.018 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 25   Controller: R-30iB Mate Year of Manufacture Cabinet: 2016.10 RCC Length (m): 7 Bedpfxoz Dz Dto Ahmeln   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00548, load capacity: 400 kg, arm reach: 3,704 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/400L manufactured in 2016.11. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/400L Model Number: A05B-1332-B203 Year of Manufacture Robot: 2016.11 Warranty term (months): 12   Payload (kg): 400 Reach (mm): 3704 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 3150   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10 Blodpfx Asz Dz Ilshmsn

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm 500mm grinding wheel diameter Blsdpfx Aeuwv Idehmen New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion Bjdpfxjuxfu Ns Ahmeln MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: excellent (used), Year of construction: 2009, Vertical glass washing machine Working height: 1500 mm Open top Glass thickness: 2 - 13 mm Working direction: from right to left Washing machine consists of: - 2 brushes (1 pair), - 2 pcs. of air knives, Bsdpfxey Na Rnj Ahmoln - 1 stainless steel water tank separated in 3 parts (1 part with water heating), - motorized inlet and outlet conveyors, - outlet conveyor is with inspection lamps. The speed of movement of the conveyor is regulated by inverter Total floor dimensions: L 4900 x W 1500 x H 2650 mm Very good and clean condition Good working order, tested See video As is Available immediately

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: S21K52-11-3, overall weight: 268 kg, arm reach: 1,717 mm, Equipment: documentation/manual, For sale is a powerful and precise 6-axis industrial robot, type Yaskawa Motoman HP20 (model: YR-HP20-B00), including the proven NX100 controller. This system is characterized by its extremely compact design, high speed, and versatility. It is ideally suited for applications such as material handling, machine loading, packaging, or arc welding. Technical data at a glance: Manufacturer: Yaskawa Motoman Model / Type: HP20 (YR-HP20-B00) Controller: NX100 Number of axes: 6 controlled axes Payload: 20 kg Max. reach: 1,717 mm Repeatability: ±0.06 mm Bodjz Euz Ujpfx Ahmsln Manipulator weight: approx. 268 kg Scope of supply: 1x Motoman HP20 robot arm (mounted on a stable steel base) 1x NX100 control cabinet 1x Handheld operating device 1x Complete hose set (robot and connecting cables) 1x Original technical documentation / manuals

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Bsdpjv E R E Ajfx Ahmoln b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive Bledpetqmqwofx Ahmen - incl. 28x collets - incl. Hainbuch changing device

Condition: ready for operation (used), Year of construction: 2022, number of controlled axis 7 Bljdpfx Aewpw Svehmon workpiece weight 7 kg weight of the machine ca. 0,024 t

Condition: used, Year of construction: 2002, Technical details: x-travel: 1500 mm z-travel: 1300 mm control: YASNAC XRC Steuerung total power requirement: 3,3 kVA Total weight, approx.: 3.200 kg Welding robot plant consists of: -welding rectifier MESSER, type Phoenix 500TG; MIG-MAG / TIG and E-welding up to 500A; air cooling; protection class IP 23 -Wire feed EWM, type Phoenix Drive 4 ROB WE, wire Ø 1,0 - 1,2mm, feed 0,5 - 24 m/min., protection IP 23 -MIG/MAG gas shielded welding torch BINZEL for wire Ø 0,8 - 1,6mm Blsdpfxju R Dfke Ahmsn -Robot ERCS UP6-RE00 with control YASNAC XRC control, travels Y-way=1.500mm and Z-way=1.300mm, circular movement swivel=approx. 90° right/left, swivel radius=1.000mm, turn 360°, welding gun rotate 360° with projection max/min: 1.500 / 500mm -1x control cabinet L:900 x W:900 x H:2500mm -1x control cabinet ERCS-UP6-RE00, control 4.0 XRC, L:610 x W:800 x H:900mm -1x welding table L:4.400 x W:550 x H:1.100mm, with compressed air connection 10 bar, working area LxW 1.200 x 340mm, X-way 3.250mm. furthermore: 1x straightening station DETEC manufacturing (with working table and straightening unit) 1x butt welding station with feeding table i.D. *

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: Bjdpfxou Tp N Dj Ahmoln - 1 pc. spare blade (must be regrinded) *

Condition: used, Technical details: welding current: 330A / 50% bis 210A / 100% protection class: IP23 total power requirement: 13,8 kVA weight of the machine approx.: 71 kg dimensions of machine: 0,95 x 0,60 x 0,90 m - MIG / MAG / MIG and electrode - cooling method water-cooled AF - insulation class B - power range 3A / 20V to 330A / 34V - Draht Ø bis 1,6mm Equipment: - cooling unit Control via robot interface Bljdpeu Nwb Njfx Ahmsn *

Condition: like new (used), Year of construction: 2020, functionality: fully functional, overall weight: 250 kg, load capacity: 10 kg, arm reach: 1,450 mm, controller manufacturer: ABB, controller model: IRC5 Compact, teach pendant manufacturer: ABB, teach pendant model: DSQC 679, input voltage: 230 V, input current: 5 A, type of input current: AC, Equipment: documentation/manual, Based on the data you provided, the standard description in Hungarian is as follows: ABB IRB 1600-10/1.45 industrial robot with IRC5 Compact controller and ABB FlexPendant. The robot is unused and has 0 operating hours. Robot: Manufacturer: ABB Model: IRB 1600 Robot variant: IRB 1600-10/1.45 Protection: Foundry Plus Payload: 10 kg Reach: 1,450 mm 6-axis industrial robot Year of manufacture: 2020 Manufacturing date: 28.02.2020 Serial No.: 1600-517625 Bsdpfx Ajz D Tf Nehmoln Robot weight: 250 kg Controller: ABB IRC5 Compact Manufacturing date: 27.02.2020 Supply voltage: 1 x 220/230 V Frequency: 50-60 Hz Rated current: 5 A Short-circuit rating: 6.5 kA Net weight: 30 kg Teach Pendant: ABB FlexPendant Model: DSQC 679 Article No.: 3HAC028357-001 Revision: 14 The robot is unused and has 0 operating hours. Located in Hungary. Further technical information, photos and documentation are available on request. If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20225203648, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, Universal Robots UR10e – hardly used, solely for testing purposes We offer a Universal Robots UR10e in excellent condition. This cobot has only been used for testing purposes and therefore has very few operating hours. The UR10e comes with the latest available software version and is ready for immediate use. Multiple UR10e cobots in stock We currently have several UR10e cobots in stock. This allows us to offer various configurations and price levels. Are you looking for, for example: 1. a cheaper, older, or more used UR10e? 2. a newer cobot with very few operating hours? 3. or even a completely unused UR10e that has never been unpacked? Please feel free to contact us. We can also create a combined order when purchasing multiple robots. The stated price is for the individual UR10e cobot. Depending on your application, we can also supply the UR10e as a complete robotic solution. For example, we can supply the UR10e as: Welding cobot – complete welding solution with a Fronius welding power source Dedicated sanding cobot – a sanding setup specifically developed for your products and production process Automatic sanding cobot – our standard Talen Robotics automatic sanding cobot Thanks to our experience in robotics and industrial automation, we can help you choose the right UR10e and configuration for your application. Are you looking for a specific age, condition, software version, or a particular number of cobots? Contact us – we may have exactly the right UR10e in stock for you. Blsdpfx Ahjzudb Sjmjn

Condition: used, Reis teaching pendant PHG 1 removed from Reis RI 16 Highspeed - removed from running machine Bsdpfx Asihdhiehmsln - fully functional manufacturer: Reis Robotics type: PHG 10 manufacturer no.: 2140350 Dition: gebraucht