Used Artech. Rotary Shear for sale (5,567)

Condition: used, Sacma cutting and slitting line: •Manufacturer of the line: Sacma S.R.L., Italy, Vigevano (PV) •Year of manufacture: 1975 •Electrical power: Voltage 400 V ± 10% - 50 Hz frequency •Compressed air: Pressure min/max 4.5 - 6 bar •Cycle time: Maximum unwinding speed is 12 m/min Bedpfx Aozumm Dehmjwu •Dimensions of the line: Length 23.5 m; width 4.8 m •Width of the coil: Min 300 mm / max 1280 mm (maximum coil weight 12 tons) •Length of the sheet: Min 450 mm / max 3000 mm •Material thickness: 0.4 - 1.0 mm

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: AERZEN D62H rotary lobe compressor, manufactured in 2020. Technical data Manufacturer: AERZEN / Aerzener Maschinenfabrik GmbH Type: D62H Machine: Rotary Lobe Compressor / Drehkolbenverdichter Year of manufacture: 2020 Nominal motor power: 160 kW Max. suction pressure (abs.): 1.013 bar Max. discharge pressure (abs.): 2.513 bar Max. differential pressure: approx. 1.5 bar / 1500 mbar Unit weight: 2,790 kg Serial number: 4084095 Customer order no.: 223922 Industrial AERZEN compressor suitable for applications requiring high air volume at low pressure. The machine is equipped with the original manufacturer's nameplate. More information, additional photos and price available on request. Worldwide delivery can be arranged. Please contact us for further information. Bodpfezucpnex Ahmswu

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Bwjdpfx Ajzt Ipkehmju Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 38461, Offer 26186 Technical data: - max. working width 1275 mm - max. material thickness (at 40 kg tensile strength) 3 mm Bwedpoztvn Ujfx Ahmju - front angle stop - front material supports approx. 300 mm - rear stop, manually adjustable 5 - 650 mm - stroke rate approx. 32 /min - cutting angle 1.9 ° - preselection for single stroke / continuous stroke - drive 400 V / 3.0 kW - E – foot switch - protective guard on the rear of the machine - space required, including rear stop, without front support arms - approx. W 1500 x H 1150 x D 1450 mm - weight approx. 1200 kg

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Your Maschinen Besmann Team We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Motor power: 5,5 KW Weight: approx. 3300 kg Bedpfx Aoztw Hxjhmowu

Condition: used, Year of construction: 1973, sheet width 1500 mm Bodpfx Ahezxt Tremjwu plate thickness 5 mm weight 3,8 t

Condition: used, Year of construction: 1967, Year of Manufacture: 1967 Bjdpfx Ajzvfi Hehmowu Machine / Serial No.: 72882 Country of Manufacture: Germany Manufacturer: Praehomawerk Kehren & Co., Hennef/Sieg Model: RW 6 Machine type: Rotary table surface grinding machine Grinding method: Surface grinding with rotary table Grinding spindle arrangement: Horizontal spindle Control: Conventional / manual Rotary table diameter: 600 mm Magnetic chuck: Electromagnetic rotary table Grinding height: approx. 350 mm Maximum workpiece diameter: approx. 650 mm Grinding wheel diameter: approx. 400 mm Grinding spindle speed: up to approx. 3,000 rpm Grinding spindle motor power: approx. 5.5–7.5 kW Vertical adjustment: Manual / powered vertical adjustment Table rotation: Powered rotary table Coolant system: Included Grinding wheel dressing: Manual dressing arrangement Machine operation: Conventional push-button control Operating hours shown: approx. 11,350 h Machine length: approx. 2,500–3,000 mm Machine width: approx. 2,000–2,300 mm Machine height: approx. 2,700–3,000 mm Machine weight: approx. 3,500 kg

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU Bedpfoxaa I Sex Ahmjwu number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm Bjdpfxoxaa Rge Ahmswu down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST Bwsdoxabd Ujpfx Ahmsu plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0,05 - 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 13.300 kg range L-W-H 5.110 x 2.570 x 2.400 mm ----- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: Bjdpfxsxabiks Ahmswu - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 4100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears Bwedpfexabwuox Ahmsu - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device * Monoblock design

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW Bjdpfx Aexablljhmjwu table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: used, functionality: fully functional, Alfa Laval TJ20G Rotary Jet Head 316L Stainless Steel 1½" Bedezlqnyspfx Ahmswu Jet head's were removed from process in 2023 and kept as spares. In good condition. We have up to 8 of these available. Contact us for more information

Condition: ready for operation (used), sheet width 2025 mm plate thickness 3.0 mm distance between columns 2050 mm no. of strokes 38 Hub/min cutting angle 1.38 ° Control konv. total power requirement 4.0 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear Bwjdpjzzrflofx Ahmsu - Manual material backgauge * Infinitely variable adjustment range * Adjustment from the rear - via handwheel * Includes mm scale - 1x side stop - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Capacity: 3100 x 6 mm Bedpfozi Rl Tox Ahmewu Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used Baykal plate shear Bodpfx Ahozvqqismowu Type MGH 3100 16 Capacity 3100 x 16 mm Adjustable back gauge Adjustable cutting clearance Rear safety guard

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4100 x 2200 x 2190 mm ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation Bwodpfoxaag Uox Ahmsu * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: good (used), Year of construction: 2012, functionality: fully functional, Aerzen Delta Hybrid D75L Rotary Lobe Compressor Bjdpfx Ahoyxnwhemswu

Condition: good (used), Rotary table Bwsdszy Rm Eepfx Ahmju Storage location: 3135 Diameter: 380 mm Graduation on the table: 360° rotatable Height: 110 mm Center hole: 40 mm Number of clamping slots: 7 Condition: very good Weight: 50 kg Dimensions: 500 x 380 x 140 mm

Condition: good (used), functionality: fully functional, Year of construction: 2010, swing-arm, 3.6m Bwsdeztnknepfx Ahmju

Condition: new, Year of construction: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout lids. The production process is fully automated from bag feeding, filling, cleaning of the nozzles, feeding the spout lids via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g. English, German etc.). Suitable for premade doypacks with a corner spout or a spout on top. - Specifications: Filling range: max. 150ml (can be customized); number of filling heads: 6; max. number of machine cycles in neutral: 18 cycles/min (corresponds to max. 108 bags/min); current: 220/380V, 3P, 1.5kW; air pressure and consumption: 5-7bar, 0.65m³; liquid contact parts are made of AISI 316 stainless steel, non-contact parts are made of AISI 304 stainless steel; machine dimensions LxWxH: 1800x1150x1950mm; weight: 1000kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bedpfsv Nlm Nsx Ahmjwu

Condition: new, Year of construction: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has filling units equipped with two filling heads each for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 3000ml; number of filling heads: 6; max. number of machine cycles in neutral: 26 cycles/min; current: 220/380V, 2.5kW; air pressure and consumption: 5-7bar, 0.7m³; machine dimensions LxWxH: 2600x1630x1900mm; weight: 1600kg. Bsdpfxjv Nlnge Ahmswu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout caps. The production process is fully automated from bag feeding, filling, cleaning the spouts, feeding the spout caps via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g. English, German etc.). CIP system and UV sterilization lamp included. Suitable for pre-made doypacks with corner spout or spout on top. - Specifications: Spout design: double ring spout; filling range: 50 - 500ml (adjustable); number of filling heads: 6; max. number of machine cycles in neutral: 16 cycles/min (corresponds to max. 100 bags/min); current: 220/380V, 3-phase, 2.5kW; air pressure and consumption: 6-7bar, 0.7m³/min; liquid contact parts are made of SUS 316 stainless steel, non-contact parts are made of SUS 304 stainless steel; machine dimensions without bag feeding belt: L2600xW1830xH2050mm; bag feeding belt dimensions: L2000xW400xH1500mm; weight: 1700kg. Bedsv Nlnajpfx Ahmowu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2026, The machine is equipped with 5 workstations: • Punching station • Flat steel shear • Angle steel shear • Notching station • Bar steel shear (round and square) Technical Data Bwodjzzkxqepfx Ahmsu Strokes per minute at 20 mm stroke: 37 /min Throat depth: 500 mm Punching force: 550 kN Hole diameter and thickness up to max.: 40×10 mm or 20x20 mm Flat steel up to max.: 300×15 or 200×20 mm Angle steel 90° up to max.: 130x130x13 mm Angle steel 45° up to max.: 70x70x7 mm Bar steel up to max.: 40 mm Square steel up to max.: 40 mm Notching up to max.: 10 mm