Used Axa Vario for sale (720)

Condition: new, bore capacity in steel (diameter) 40,0 mm throat 320 mm bore stroke 160 mm morse taper 4 MK table: 505 x 425 mm swivelling +/- 50 Grad T-slots 14,0 mm turning speeds 90 - 1455 U/min quill feed 0,1/0,2/0,3 mm/U column diameter 120 mm total power requirement 1,0 / 1,5 kW weight of the machine ca. 380 kg. range L-W-H 500 x 930 x 1870 mm characteristics Fgedexaazropfx Afueh - Vario drive for precise setting of the speed - Quill infeed either by hand or by mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed can be read quickly and easily using the digital display - Solid, swiveling gray cast iron table with T-slots and coolant channel - The coolant system and lighting are included in the scope of delivery - Adjustable drilling depth stop, drilling depth can be read off using a scale - Right-left rotation device for thread cutting scope of delivery - Drill chuck arbor MK 4 / B 16 - coolant device - Digital speed display - Keyless chuck 1 - 16 mm / B 16 - Reducing sleeve MK 4/3, MK 4/2, MK 3/1 - LED machine light - Automatic tool ejector - Height-adjustable protective cover

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, Manufacturer: KOIKE Type: HD 100 VF Year of construction: 2012 Double driven and double geared Remote control with inverter and vario speeds Tilting 0 - 135 gr Specifications Metric US Standard Table length 1220 mm Table width 1220 mm Table load on 50 mm 5000 Table load to 200 mm 4545 Table load to 400 mm 3500 Table load to 600 mm 2900 Table load to 1,000 mm 1850 Table rotation 360 ° Dimensions (estimate) length 2000 mm width 1600 mm height 1700 mm Fgodpfx Afjrg A N Neush weight 2400 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 4208 E, Makita carpentry mortise machine, type 5500 S Motor: 1,420 W, 230 volts, 50 Hz Longitudinal saw blade speed: 1,650 rpm Crosscut saw blade speed: 2,200 rpm Fjdpfx Afey Id Sgouegh Complete with R. Beck "Vario" saw and work table Workpiece length, max: 3,100 mm Adjustable angle: 0 to 45° Ex works, as inspected at the Seevetal location Excluding transport; subject to prior sale.

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Fedpfxswazn As Afuogh Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 250 kg, Equipment: crane, GEDA KOSI GRAĐEVINSKI LIFT COMFORT 250 12M NOVO TIP: GEDA COMFORT, NOVO, 2026. god. Proizvođač: GEDA, Njemačka Pogon: 1,3 kW/230 V/50 Hz Nosivost: max 250 kg Brzina dizanja: 30 m/min Pribor za visinu dizanja do 12 m se sastoji od: - Elektromotor - Zaglavak s koloturom - Standardna kolica sa sigurnosnom kočnicom - Početna tračnica 2,0 m - Produžetak 250/2 m x 4 kom - Produžetak 250/1 m - Koljeno(od 20 do 45*) - Univerzalna košara ( 82 x 35 x 70 cm) +++++ ++GEDA KOSI LIFT MOŽETE DOBITI I SA 200KG NOSIVOST-MODEL 'STANDARD'++ +++++ +++++ZATRAŽITE JOŠ POVOLJNIJU PONUDU ZA GEDU STANDARD 200 +++++ +++++GEDA JE IDEALNA ZA DIZANJE SOLARNIH PANELA+++++ +++ZA VISINU DIZANJA DO14M DODAJE SE JOS JEDNA TRAČNICA OD 2,0 M++++ ++++POSEBNA PROMOTIVNA CIJENA ZA 14M: CIJENA NA UPIT+++++ +++MOŽETE ISTO KUPITI 10M, 16M, 18M, 20M itd.+++++ +++++ +++++VIŠA VISINA GEDA LIFTA OD 21m:+++++ ++++SA 43 M SAJLE MOŽETE SLOŽITI GEDU DO MAX. 21M DIZANJA+++ +++SAMO DOKUPITE JOŠ 2-METARSKIH TRAČNICA+++++ +++MOŽETE ODABRATI RAZLIČITE VISINE DIZANJA--10M, 12M, ILI 16M+ ++++18m++20m++22m++24m++26m++28m++itd.+++++ +++++PRIKAZANA CIJENA JE ZA 12M+++++ +++OVISNO KOLIKO 2-METARSKIH TRAČNICA KUPITE+++++ +++AKO VAM JE POTREBNA VEĆA DUŽINA OD 21M - UGRAĐUJEMO ++ +++++VAM++++GRATIS++DUŽU SAJLA OD 63M+++++ +++++ +++++OD PROFESIONALCA ZA PROFESIONALCE+++++ +++++ MONTAŽA MOGUĆA ISTO NA TERASE, BALKONE, RAVNE KROVOVE+++ +++ILI PROZORE TE UZ SKELU KAO OKOMITA DIZALICA+++++ ++ZA DIZANJE MATRIJALA KOD FASADERSKIH RADOVA+++++ +++++UZ GEDA VARIO-PREINAKU+++++ +++++(NIVELIRANJE KOŠARE U VODORAVNI POLOŽAJ)+++++ +++++ DOBIVATE OKOMITU DIZALICU +++++ +++++DAKLE DOBIJETE 2 DIZALICE U JEDNOJ +++++ ATEST za kosi građevinski lift od ovlaštenog poduzeća za ispitivanje i kontrolu. +++++ Fgsdpfxexvyagj Afush +++ORIGINAL GEDA UPUTSTVO ZA MONTAŽU I RUKOVANJE NA HR-JEZIKU+++ +++++ +++AKCIJSKA CIJENA GEDA 250 SAMO++4.900 +++++ +++AKCIJSKA CIJENA GEDA 200 SAMO ++4.200 +++++ +++++GARANCIJA 12 MJESECI!+++++ +++++ +++++UVJEK NA LAGERU SPREMNO ZA ISPORUKU VIŠE KOMADA GEDA LIFTOVA +++++ +++++STANDARD 200KG +++++TE+++++COMFORT 250KG +++++ +++++ZA SVA DODATNA PITANJA NAŠ TIM STOJI NA RASPOLAGANJU+++++ NAJBOLJE NAS NAZOVITE I SAZNAJTE KOJI JE GEDA KOSI LIFT NAJBOLJI ZA VAŠE POTREBE +++++ ++++MI SMO GLAVNI OVLAŠTENI ZASTUPNIK I +++++ SERVISNI CENTAR ZA GEDA ORIGINAL GRAĐEVINSKE DIZALICE U ++ REPUBLICI HRVATSKOJ++VEĆ PREKO 30 GODINA+++++ +++++

Condition: used, mileage: 3,243 km, power: 397 kW (539.77 HP), first registration: 12/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 12/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Digital tachograph R4.1. The ESE 6 RD 8000 is the ideal vehicle for demanding civil engineering and waste disposal work. The combination of high suction power and compact dimensions makes this model a versatile all-rounder for use on construction sites. Features include: entry lighting for driver and passenger, sun visor, driver's air-suspended seat, cooler box, all-round lights on the cab, LED daytime running lights, air horns on the cab, reversing camera, LED work lights, trailer hitch with ball head, articulated hose carrier with swivel joint with swivel motor, swivel range 180°, additional swivel joint as a 3rd link, hydraulic swivel drive, MAN sound system, RIO box, MAN radio with 12.3" screen, navigation with SD card, lane guard system, reversing camera, ESE 32/8DV2-K (ESE 6RD 8000) PTO OMSI, high-performance double fan Qmax 42000 m³/h Pmax 40000 Pa, 8 m³ tipping container, one-sided discharge, tipping height approx. 2000mm, high-pressure water system 200 bar 21l/min, RSP exhaust silencer, emergency stop button, RM Vario suction nozzle, 2x PU suction hose extension each 2 meters, fan and superstructure, rotating module on the suction nozzle, gas detection system, grounding system. Fgsdozc A Arjpfx Afujh

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort* Cab: TG3 Future Powertrain Platform GX: Maximum size (wide, long, extra-high), comfort suspension, electrically operated glass sunroof, roof spoiler, and side flaps with aerodynamic extensions. * Seats: Premium driver's seat package (air-suspended, seat heating, lumbar support, shoulder adjustment, armrests), Vario co-driver's seat (rotatable, foldable, non-suspended, armrests). * Sleeping Area: Two beds (comfortable mattress 110 mm at the bottom, standard mattress 90 mm at the top), slatted base, storage compartments, reading lights, sockets. * Air Conditioning: Electric auxiliary air conditioning system, Climatronic, water auxiliary heater (4 kW), permanent ventilation with overpressure to prevent dust ingress. * Interior: Dark Moon Grey color scheme with silver and chrome accents, carpet on the engine tunnel, numerous storage compartments, refrigerator, waste bin, sockets (12V, 24V, 230V, USB). ----Safety & Assistance Systems* Driver Assistance: Electronic Stability Program (ESP), Anti-Slip Regulation (ASR), Adaptive Cruise Control (ACC) Stop and Go, Emergency Brake Assist (EBA) Plus, Lane Departure Warning System (LDW), Cornering Assistant, Attention Guard, Traffic Sign Recognition, Reversing Motion System, Distance Warning System, Intelligent Speed Assistant (ISA), Driver Drowsiness Detection, Collision Warning System for Pedestrians and Cyclists. * Brakes: Electronic Braking System (EBS), ABS, Full Brake Assist, High-Performance Engine Brake (CRB), Retarder Eco, disc brakes front and rear, electronic parking brake, EasyStart hill start assist. * Lights & Visibility: LED Package Plus (headlights, fog lights, cornering lights), High Beam Assistant, automatic headlight activation, LED taillights, side marker lights, work lights, digital mirror replacement system MAN OptiView (heated, curb mirror, front mirror). ----Drivetrain & Chassis* Engine: MAN D3066 LF11, 12.7 l, 382 kW (520 hp), 2,650 Nm, Euro 6e, Common Rail, various filters and protection functions. * Transmission: MAN TipMatic 14.33 with retarder, various driving programs (Efficiency Plus, Manoeuvre, Idle Speed Driving), heat exchanger, reinforced single-plate clutch. * Axles & Suspension: 4x2, front axle 7,500 kg (leaf suspension, parabolic, 1-leaf, steel), rear axle 13,000 kg (air suspension), rear axle differential lock, stabilizers, shock absorbers, four-link suspension. Fgodpfx Aozd Ni Hjfush * Tires & Rims: Continental tires (front axle 385/55R22.5, rear axle 315/70R22.5), Alcoa Dura-Bright EVO rims, tire pressure monitoring system with temperature display. ----Electrical System & On-Board Power Supply* Batteries: 2 x 12V, 210 Ah AGM, maintenance-free, electrical main battery switch, fuse box, comfortable external starting capability. * Generator: 28 V, 180 A, 5,000 W. ----Infotainment & Connectivity* Systems: MAN Media System Professional Navigation (12.3 inches), Advanced sound system with subwoofer, smartphone integration, online traffic information, connectivity board module, integration of MAN apps. * Controls: Multifunction steering wheel (leather, height and tilt adjustable), MAN SmartSelect with touchpad, Professional instrument panel (12.3 inches). ----Superstructure & Interfaces* Saddle Coupling: JOST JSK 42 K0, 2 inches, automatic lubrication, slide bearing, various electrical and pneumatic connections for the semi-trailer. * Tanks: 1100 l diesel (690 l left, 410 l right, aluminum), 165 l AdBlue (left, aluminum with plastic inner coating), lockable tank closures. --

Condition: used, Year of construction: 1998, Technical details: Fgedpfxjvdczaj Afujh total power requirement: 3,3 kw volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front Fedpfxjzf Eh Us Afuogh 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: as good as new (ex-display), Adapter version for Variolock Diameter 63 mm Length 70 mm Diameter 140 mm Fsdpfx Aeb Tywyjfuegh No. 344 10 68 1463S 44209

Condition: used, Drill sleeve, MK 4 Length 170 mm Diameter 63 mm Fgjdeb Tyqajpfx Afueh

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Fsdpfx Afsd Htvdeuegh Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037809, empty load weight: 7,722 kg, maximum load weight: 31,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: white, Archive photos shown. Vehicle may still be in operation. Fjdpfszl D Iysx Afusgh Fliegl Coil Curtainsider Semi-Trailer Chassis: Approx. 8,040 mm reinforced coil well with coil cover, 8 removable coil posts, 4 pairs of internal coil pockets, 1 pair of lashing adapters for coil posts, 4 pairs of removable 6 t Vario-Lash lashing rings, 7 pairs of 5 t lashing rings in the outer frame, 9 pairs of 5 t lashing rings in the coil well, 1 pair of 5 t lashing points in the longitudinal beam, pallet box for 8 Euro pallets, heavy-duty pallet stops with lashing points, spare wheel carrier, 2 lockable plastic toolboxes, galvanized rear forklift mounting bracket, 5 pairs of outer stake pockets and 3 centre stake pockets compatible with coil stakes. Axles & Suspension: SAF disc brake axles, laser-aligned axle geometry for reduced tyre wear and fuel consumption, TIS automatic tyre inflation and pressure monitoring system, air suspension, automatic lift axle with forced lowering, traction aid and electric truck control. Braking System: Dual-line air brake system with colour-coded air lines, aluminium air tank, spring parking brake, raise/lower valve with auto-reset, AAC Basic automatic unloading axle (manoeuvring aid up to 20 km/h), WABCO SmartBoard displaying axle loads, mileage and diagnostic messages, axle load monitoring via EBS CAN bus. Wheels & Tyres: 435/50 R19.5 tyres with polished aluminium wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables), 2 × 7-pin rear sockets for truck-mounted forklift. Floor: Approx. 30 mm plywood floor for forklift axle loads up to 5,600 kg. Front Wall: Front bulkhead with two pairs of lashing rings and integrated storage compartment accessible from inside. Side Posts: 3 pairs of sliding posts, 5 post positions, 6 widening adapters (+25 mm each). Load Securing: 7 rows of aluminium side slats, 1 pair of Vario steel slats and 1 Vario locking beam for front and rear load securing. Roof: Fliegl Blitz sliding roof, Anti-Ice system with central air hose and automatic venting via brake light signal, Fliegl Easy Fix system with 12 pairs of strap holders integrated into the roof bows, EcoLift lifting roof (approx. 380 mm).

Condition: used, Recording: HS21 Variolock Pin: 80/70 mm Shaft: 350 mm Axle: 410 mm Fgodpfezkzzuox Afush

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg CX 75 - 4 + L – 2018 Year of Manufacture : 2018 Impression Count : 55 mio imp. 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER • EASYCONTROL (Color Measurement System) • AUTOPLATE (automatic plate change) • SPEED : 15.000 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller Fsdpoz E N A Tefx Afusgh • High Pile Delivery • Infra-Red Dryer • Preset Feeder & Delivery (automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • Antistatic Device • Pneumatic compressor • Weko AP 262 Powder Spray • Air Cooled machine • Can print up to 0,8 mm This machine is in excellent condition and is available immediately. It can be seen running in one Print Shop in Germany

Condition: excellent (used), functionality: fully functional, mileage: 11,450 km, fuel: diesel, gearing type: mechanical, emission class: euro6d, Year of construction: 2021, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, MULTICAR M31 Municipal utility vehicle with the following attachments: Fsdszhv Taspfx Afuogh - BUCHER Unix SC200 Vario wedge snowplow with a maximum clearing width of 200 cm - GMEINER Husky V13 silo spreader with control panel This Multicar M31 was first put into operation in 2021 and has only 860 total operating hours, 460 hydraulic hours, and 11,450 km. It comes from a single owner. The vehicle is in good overall condition, ready for immediate use, and its current list price is €150,000. The sale is for a used machine, excluding any return, warranty, or guarantee. - Net price: €67,142 / Gross price: €79,900 - Inspection/test drive is possible at any time! - Nationwide shipping can be arranged; the costs depend on the distance! - We will be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: not inspected (used), Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm Fgedpfeyrtzkjx Afujh control Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm ...

Condition: used, Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg Control MemoryPlus 1 WEINIG VARIOMAT Planing and Moulding Machine ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Fgsdpfxoy Spvfo Afueh Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, the infeed roller returns to its starting position for the next workpiece. Additional Features: ----- MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-P...

Condition: used, Year of construction: 2006, functionality: fully functional, overall weight: 75 kg, Pad printing machine Fgjdpeywx H Defx Afush

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Fgjdpfx Afshxvu Ejush Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), overall weight: 3,500 kg, fuel type: diesel, color: orange, fuel: diesel, gearing type: hydrostat, Year of construction: 2023, operating hours: 139 h, Equipment: air conditioning, all wheel drive, HOLDER C65 SC Municipal utility vehicle with winter service equipment Accessories: 1. KUGELMANN VS150/74 Vario wedge snowplow with a maximum clearing width of 150 cm Fjdpfx Aoz Dwbhefuegh 2. KUGELMANN Duplex salt spreader with control panel This HOLDER C65 SC utility vehicle was first commissioned at the end of 2023 and has only 139 operating hours according to the meter. It is in very good overall condition with only minor signs of wear. Service recently performed. - Net price €71,344 // Gross price €84,900 - Inspection/test drive is possible - Shipping can be arranged nationwide; the costs depend on the distance! - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: used, 24 used go/no-go gauges from various manufacturers 15 double-jaw gauges from Hommel Fgjdpfx Aezumgqsfueh 1 single-jaw gauge from Roto 8 with unknown manufacturer, including 1 single-jaw gauge Double-sided testing tool – double-jaw limit gauge for metrology for good and reject sides in separate jaws Price negotiable Our asking price for 24 pieces is €240.00 net, ex works, plus packaging costs. All technical specifications are subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: used, mileage: 184,846 km, power: 240 kW (326.31 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 15,720 kg, maximum load weight: 10,280 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, air conditioning, cabin, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * 2 x available * Faun Variopress 522 waste collection container * Volume: 22 m³ * Zöller dumping system 2301 * Split automatic lifter Euro Delta Premium * Container sizes 80-1300 liters * Econic cab with 3 seats * Spacious cab with low entrances - ideal for frequent stopovers * Folding door on the passenger side * Right-hand drive - so that the driver does not have to get out in traffic during stops * Air conditioning * Reversing camera Fjdpfevhprajx Afuogh * Cruise control * STOPPING BRAKE * Engine brake * Turn assist system * Comfort driver's seat, air suspension * Seat heating * Electric windows * Electric mirrors * Electric sunblind * Windshield with band filter * On-board computer * Automatic transmission * Full air suspension * 3rd axle steering axle * Rotating beacons * Working lights * Snow chains * Hand washing system * Daytime running lights * ABS and ASR * Differential lock * Central lubrication * Wheelbase: 3,900 + 1,400 mm * Max. gross vehicle weight: 26,000 kg * Unladen weight: 15,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, functionality: unexamined, Used BARMAG / EMS-Inventa AG extrusion and spinning-related industrial equipment available in Thailand. Fjdpfx Afoz Hzuqsuegh The equipment is currently installed at an existing industrial facility in Thailand. The available equipment includes BARMAG and EMS-Inventa AG machinery together with various auxiliary and process equipment, including: - Extrusion-related machinery - Spinning-related production equipment - Process vessels and tanks - Feeding / dosing equipment - Pumps and auxiliary equipment - Motors and gearboxes - Heating and cooling systems - Electrical control cabinets - Process piping and auxiliary systems The equipment is offered as used machinery. The exact models, manufacturing years, technical specifications, completeness and current operating condition are subject to verification. The equipment may be available as a complete production line, individual machines or selected components, depending on the buyer's requirements. Additional photographs, nameplate information and technical details can be provided to interested buyers. The equipment is located in Thailand and can be inspected by appointment. Dismantling and transportation are to be arranged with the buyer.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Holp Vario Bucket / VL.112.700 / OQ65 / HARDOX / Wear plates / NEW / in stock & immediately available Price: €6,620.00 net / €7,877.80 gross - Excavators from - to: 14 tons – 25 tons - Own weight approx.: 570 kg - Capacity SAE: 700 liters - Angle of repose: 54° - Radius of the bottom of the excavation: 150 mm - Incl. wear plates - The bucket is made entirely of HARDOX. Advantages of the Holp Vario Bucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular construction - Round bottom - Two working openings - Rectangular working opening - V-shaped - The Vario Bucket impresses with its high performance and clean operation. It enables precise dumping through the V-shaped opening and offers very high excavation performance in towed operation. Wherever more speed and flexibility are needed to handle a wide variety of tasks, the Vario Bucket is a real asset on the construction site: It is faster, more adaptable, and safer. We have many other Holp products in our warehouse that are immediately available! Simply contact us at [phone number] or [email address] for more information. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Holp range! Errors and prior sale excepted! = Further information = Fgodpsyhyl Esfx Afueh New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Tobias Ebert for more information.