Used Bar Processing Machine for sale (76,274)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, - Handtmann Vacuum Filler Type VF 616 - Output approx. 3,600 kg/h – Filling pressure approx. 45 bar – Power: 6 kW / 3 x 400 V / 50 Hz - PCK-3 control monitor - Filling hopper 350 L – Split – 90/350 L - Weight compensation - Busch vacuum pump 16 m³ - Lift for 200 L standard trolleys Type 83-6, stainless steel - Twisting gearbox Type AG 410, stainless steel Iaodpsykz T Esfx Apcjr - Holding device Type HV 414 incl. 2 x filling tubes + brake / stainless steel - Redirecting unit with redirecting rollers / stainless steel - Casing loading device DA 78-6 – stainless steel - Year of manufacture: 2015 / Fully reconditioned in 2026!!! With original spare parts – Made by Handtmann!!! - Complete accessories + documentation

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, Schröder injector with 40 needles, workshop tested, functioning Ijdpoyi Sggsfx Apcoar

Condition: used, Garos GWT 3500 vacuum tumbler whit Scanvaegt weight system and built in vacuum pump. Capacity 3500 lit. Iodpfx Aoykub Nepcjar

Condition: good (used), functionality: fully functional, Schröter 2-trolley smoke, cooking, and drying systems, gas-heated Iajdpfx Apsykl N Recer Each unit suitable for 2 standard trolleys 1x1x2 meters With gas burner With cooling coil With smoke generator With control system Wiring diagrams available. There are 2 units, fully dismantled and dry stored.

Condition: excellent (used), Year of construction: 2018, operating hours: 4,000 h, functionality: fully functional, Meat Recovery Unit "P-60-MM" Iedpfx Apsyuf D Ajcjar for the separation of all kinds of red meat bones (beef, etc.) for high quality MDM meat capacity with BB-3000: up to 900-1.000 kg/h* *capacitiy is value for orientation, depending an size of bones, charging, etc. with 8mm hole filter and stainless steel piping to softseparator with computer control "ISC-E40" complete, 400 V / 3/50 Hz COUNTRY OF ORIGIN: AUSTRIA Art-Nr.: 015018

Condition: refurbished (used), Year of construction: 2015, HANDTMANN VF-608 plus F,P.A. Isdpfxjpy Edle Apcsar 2015 year The machine has been completely renovated using only original parts. 3 months warranty for parts. All seals, bearings and siemering are new. Servomotors, gears and vacuum pump after complete regeneration. New control panel. Machine with a clip-socket. Accessories: grease, grease gun, impeller wrench, funnel wrench, scraper, set of funnels and technical documentation. The machine is included with the AG-410 linking gearbox. Delivery time: ready to delivery.

Condition: refurbished (used), Year of construction: 2015, Handtmann VF-608 plus F,P.A. 2015 year The machine has been completely renovated using only original parts. 3 months warranty for parts. Iajdpfsymybgjx Apcsr All seals, bearings and siemering are new. Servomotors, gears and vacuum pump after complete regeneration. New control panel. Machine with a clip-socket. Accessories: grease, grease gun, impeller wrench, funnel wrench, scraper, set of funnels and technical documentation. The machine is included with the AG-410 linking gearbox. Delivery time: ready to delivery.

Condition: good (used), functionality: fully functional, machine/vehicle number: Nr.72.092.010, spindle bore: 12 mm, Iemca CS112 No.72.092.010 Iemca Bar Feeder and Motor Round bars Ø 1 - 12.7 mm (3/64" - 1/2") Supplied with guide sets for 4 mm and 12 mm and with 2 motors for Tornos M4 For 3 m bar lengths Isdpfx Ajrn I Dfspcear ON CLEARANCE SALE REDUCED PRICE! Hexagonal bars Ø 1.3 - 11 mm (3/64" - 7/16") Capacity: 28 bars Ø 7.5 mm - 16 bars Ø 12.7 mm Min. bar change time: 26 sec. (with 3200 mm bars) (mod. 32) Feed speed: 1000 mm/sec. Return speed: 1600 mm/sec. Supply voltage: 230/400 volts Installed power: 1.8 kW

Condition: good (used), Cutting / Centering Machine UMA SZM 100 E Year of manufacture: 1976 Serial No.: 33-0241 Clamping range: 10–160 mm Ijdsxt Dzpopfx Apcoar Diameter for facing up to 100 mm Clamping length: 90–1950 mm Drill spindle: ISO40 DIN2079 2 clamping fixtures - Special program for internal threading with reverse feed and spindle reservation as a second program in automatic mode - Automatic triple chip-breaking for deep drilling - 2-edge positive tool head with 12H7 keyway for overcutting holders with 2 carbide indexable inserts SPGN 190 (DIN4968), with holder for centering drill R4.0 mm The machine was in use until recently and is fully operational. Price: net, ex stock, loaded.

Condition: new, Year of construction: 2025, operating hours: 8 h, total length: 2,000 mm, total width: 3,000 mm, total height: 3,000 mm, overall weight: 1,000 kg, type of input current: three-phase, power: 2.5 kW (3.40 HP), pressure: 3 bar, compressed air connection: 3 bar, input frequency: 50 Hz, Designed to form portions of minced meat by volume - 8 portions of 1 kg + up to 100 g and feed them into molds made on a thermoforming machine. - Productivity of the machine unit: a) up to 8 cycles / min for minced pork; b) up to 8-5.4 cycles / minute on average, depending on the content of beef fat in minced meat. Total electrical power consumption - 2.5 kW. included: 1.Filler 2.Tipper option 2 position empty product Height ~ 700mm and ~1900mm 3.Screw conveyor Multivac is not included - MULTIVAC R515 Iedpev R Ttaofx Apcear bottom film - 140 microns Top film - 60 microns. Pack size - 135 x 175mm, block size 4x2 - 375 x 585 mm Length x width x height 2000.0 × 3000.0 × 2000.0 This will make it easier to work in production. This will increase the production capacity of minced meat.

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Iajdpetgvgpofx Apcor Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: new, Year of construction: 2026, For sale: a fully electric Highspeed-M mould carrier! Some highlights of our fully electric Highspeed-M mould carrier: Iaodpfx Apjyi E Hyjcer • Suitable for both open and closed foam application • High-precision linear drives with integrated rack and pinion guides • Simultaneous movement of axes possible • Maximum swivel ranges: tower axis: +/- 95°; clamping plates: +/- 45° • Variable and absolutely precise positioning via frequency-controlled servo drives • High travel speeds for closing and swiveling operations • Ergonomic design for user-friendly accessibility • Powerful and future-proof thanks to the use of state-of-the-art, high-quality components • Visualisation system with user-friendly operation of all functions • All customization options can be realized ° Extract from the technical data of the pictured mould carrier: · Mounting plate dimensions: W 1,500 mm x D 1,000 mm · Max. mould weight: 1,500 kg, top part max. 500 kg · Max. clamping force: 350 kN at 6 bar compressed air · Max. demoulding force: 30 kN · Maximum parallel stroke: 1,800 mm · Swivel angle of upper/lower mounting plate: 0° - 45° · Swivel angle of tower: -90° to +95°

Condition: excellent (used), functionality: fully functional, Steen St-600 skinning machine for poultry legs. Iedpfxeyka Nls Apcoar

Condition: used, The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Iedpjyn Ikxofx Apcear Hydraulic automatic tilting kettle Manufacturer: Sind With cover Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123

Condition: excellent (used), functionality: fully functional, total length: 800 mm, total width: 800 mm, total height: 1,800 mm, Offered is a sausage hanging trolley with dimensions 180x80x80 cm. Wheels are new. Isdpfxjyh Itqs Apcear 3 units available. Further details upon request. Payment in cash or advance payment. Sale only to businesses. No warranty or guarantee.

Condition: good (used), functionality: fully functional, Offered is a Kobe K-310 bone saw in good condition. The machine is fully functional and the bearing on the upper wheel has been replaced. Iasdpfx Apeyh H Rbecer New saw blade installed. Saw table dimensions: width 57 cm, depth 78 cm Max. cutting height approx. 35 cm Immediately ready for use, see photos. Further details on request. Payment in cash or in advance. Sale to commercial customers only, no warranty or liability.

Condition: refurbished (used), Baader 185 Fish Filleting Machine Iedoyfhx Repfx Apcoar With Baader 51 skinner attached Overhauled in 2022 and little use since Last used on Cod. Lots of pictures and videos available on request

Condition: good (used), JBT Stein TM3 batter mixer. Direct from closed fried food factory, this machine was used for making tempura batter for a line producing chicken burgers for McD. 2011 machine but the factory closed down in 2016. Iaodpfx Aou Iax Iopcor

Condition: like new (used), functionality: fully functional, Koppens mod TG 2000/400-219 gitter conveyor whit virus speed control on gearbox. Iedpfx Aoyitu Ejpcjar Belt width 40 cm.

Condition: ready for operation (used), functionality: fully functional, Laska WW-200 G angle grinder whit stainless steel housing and screws. Iajdpfx Apeyitqgocor This machine has 220 volt electric system and various speeds.

Condition: new, Year of construction: 2025, functionality: fully functional, Blanching bath with steam for Salmon pieces. Blanching area 3000 mm. Mesh belt width 600 mm. Fish loading at the entrance (manually) – Water supply from system D – 40 mm. Steam supply 30 mm, 6-8 bar 150gr. Bath with double wall (heated). Lids can be lifted. Two hatches in the side wall. T regulation from 70-95 grC, mesh belt speed adjustable - from the control cabinet Ventilation outlet for the bath 200mm. Cooling in the exit area - cold water from the system. Level overflow. Water level sensor in the bath - for filling the bath. Steam heating - snake. Closed system. Knife at the end of the mesh belt (belt cleaning). Iodpfev E Ec Nox Apcoar

Condition: ready for operation (used), functionality: fully functional, The Kerslicer KR 1000-120 Kaufler slicer is designed for industrial environments requiring consistent and precise food product slicing. It ensures uniform cutting, which contributes to the homogeneity of final products. This enables production lines to maintain stable quality throughout the process. Additionally, the French-engineered design guarantees robustness suited to industrial throughput rates. This slicer integrates easily into existing lines, as its format is optimized for continuous operation. The stainless steel frame facilitates cleaning and meets the hygiene standards of the food processing industry. Moreover, its ergonomic layout allows for straightforward operation by your staff, keeping production workflows smooth and without complicating daily operations. The KR 1000-120 model is based on a reliable mechanical design aimed at minimizing unplanned downtime. Maintenance procedures are straightforward, ensuring high machine uptime. Regular, accurate slicing also helps minimize product waste during cutting, which in turn increases the overall efficiency of your installation. Offered second-hand by Europ’Equipement, the Kerslicer KR 1000-120 is identified by its manufacturer’s plate and is inspected before being put back into service. This ensures you receive a traceable machine that is ready for immediate use. Refurbishment reduces upfront investment while providing a dependable and industry-compliant solution. As a result, this slicer is a cost-effective choice for optimizing production while maintaining cost control. Technical specifications: - Belt width: up to 1000 mm - Direct inline feed - 304 stainless steel construction Isdeygvhiepfx Apcear - Power supply: 400 V three-phase - Power: 5.5 kW (SEW variable frequency drive) - Dimensions: 2,660 × 1,315 × 1,950 mm - Weight: 1,400 kg - Year of manufacture: 2005 - Electrical connection: 400 V r269LX-c

Condition: ready for operation (used), functionality: fully functional, The Lagarde SVS100 autoclave is designed for industrial facilities requiring controlled thermal processing of packaged products. It ensures consistent and reproducible sterilization cycles, thereby contributing to the sanitary safety of production lines. As a result, processing remains controlled throughout the operation. Additionally, the Sterinov design meets the stringent requirements of food processing environments. This autoclave can be integrated into production lines dedicated to canned foods, ready meals, and packaged products. Its 400 V electric operation facilitates installation in standard industrial facilities. Furthermore, the robust construction of the equipment allows for repeated use under demanding production conditions, providing a reliable solution suited to industrial requirements. The SVS 100 is engineered with an architecture that guarantees stable thermal cycles, keeping operating parameters constant during processing phases. The simple electrical setup also makes maintenance and daily operation easier, supporting secure, uninterrupted production without unnecessarily complicating the process. Offered as a used unit by Europ’Équipement, the Lagarde Sterinov SVS 100 autoclave is identified by its manufacturer's data plate and undergoes inspection before being put back into service. This ensures users have a traceable, immediately operable unit. Acquiring a reconditioned autoclave also helps reduce capital investment while maintaining a tool suited to industrial sterilization requirements, making this model a cost-effective solution that ensures reliable thermal processing. Technical specifications: Model: SVS 100 Type: industrial sterilization autoclave Power supply: 400 V Frequency: 50 Hz Maximum operating current: 12 A Wiring diagram number: 6000.A Marking: Sterinov manufacturer's plate Iasdpfeyguaqjx Apcjr

Condition: used, Year of construction: 1998, operating hours: 75,336 h, functionality: fully functional, machine/vehicle number: T62204, Equipment: documentation/manual, TECHNICAL DETAILS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speeds: 10,000 rpm - C axis indexing precision: 0.1° COUNTER SPINDLE - Max. bar diameter: 20 mm - Spindle speeds: 10,000 rpm - Spindle power: 3.7 kW - C axis indexing precision: 0.1° - Number of guide bush holders: 2 GUIDE BUSH HOLDER 1 - Number of positions: 5 GUIDE BUSH HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Live tooling speed: 8,000 rpm END ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Live tooling speed: 6,000 rpm SECONDARY OPERATION - Number of positions: 7 - Number of driven positions: 3 - Live tooling speed: 8,000 rpm POWER SUPPLY - Supply voltage: 400 V - Total installed power: 14 kW WEIGHT & DIMENSIONS - Machine footprint: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC: Fanuc - Driven tool motor at: S2, S3, S5 vertical/horizontal - Rotating guide bush - Parts catcher - Workpiece ejection Iaodpfx Apsw Stndocsr - Coolant tank - Bar loader: ROBOBAR SSF

Condition: ready for operation (used), functionality: fully functional, The Stériflow 1322 Barriquand autoclave is designed for industrial facilities requiring controlled thermal sterilization of packaged products. It enables precise processing cycles thanks to heating by superheated water or steam, ensuring uniform temperature increase. This results in consistent thermal treatment in compliance with food safety standards. Additionally, this method minimizes temperature discrepancies within the load. This autoclave is integrated into food processing lines for canned goods, ready meals, or packaged products. Its usable volume of 3,700 liters allows for processing large loads while maintaining precise process control. Furthermore, Barriquand’s industrial construction ensures robustness suitable for repeated operation, making the equipment well-suited to demanding production environments. The pressure vessel design allows operation up to 6 bar, ensuring thermal cycle stability. Sterilization parameters remain controlled throughout the process. The metal structure, engineered for pressurized circuits, adds to the installation’s reliability. As a result, the autoclave safeguards the sanitary quality of finished products. Offered used by Europ’Equipement, the Stériflow 1322 autoclave is identified by its manufacturer’s plate and inspected before recommissioning. This ensures that the operator receives reliable, traceable equipment. Moreover, purchasing a refurbished autoclave reduces investment costs while providing a solution suitable for industrial requirements. Consequently, this model represents a cost-effective solution for optimizing production expenses without compromising process safety. Technical specifications: Year of manufacture: 1990 Iasdpfx Apjygl Hujcsr Serial number: S677 Heating medium: superheated water / steam Usable volume: 3,700 L Maximum operating pressure: 6 bar Circuit: B Empty weight: 2,400 kg