Used Cartes Ce 162 Hh for sale (10,718)

Year of construction: 1995, condition: used, machine/vehicle number: 4141, Emulsion maintenance trolley FA-300/U Blotenberg, filter unit -WT 114- Offered here is an emulsion care trolley/emulsion filter of the company Blotenberg. Technical data: Manufacturer: Blotenberg Saugsysteme Type: FA-300/U Motor power: 0,25kW/ 220V / 3,1A Year of manufacture: 1995 Flow rate: 300l/h Serial number: 4141 dimensions: 1000 x 900 x 450mm Suitable for: Emulsion Coolant Cleaning solution Wet cutting machine tools Parts washers Hnedslf D Ugepfx Ahzop Mode of operation according to the manufacturer: The emulsion maintenance cart continuously draws in the contaminated emulsion mixture, separates the substances and returns the cleaned emulsion to the machine. All this is done purely physically - no spinning or centrifuging.

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Hedpeyxq Ucofx Ahzonp

Condition: ready for operation (used), machine/vehicle number: 80290, Extraction capacity: 5500 m³ / h Negative pressure: 765 - 351 Pa Suction opening: 180 x 220 mm Outlet opening: 300 mm Ø Speed: 1400 rpm Hnedsft Siuspfx Ahzjp Drive motor: 380 V, 5.3 kW Weight: 60 kg Required space: 720 x 680 x 350 mm

Condition: good (used), Year of construction: 2005, Tool-Temp TT-162 H, year of manufacture approx. 2005, oil Hedpfx Ahsyzga Tozonp

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 3500 kg Hnsdsvz Ei Uepfx Ahzsp Total power requirement 57,7 kw

Year of construction: 2026, condition: new, planing width 610 mm Hnodpeyk Ibcofx Ahzjp total power requirement 19,5 kW Weight 2500 kg

Year of construction: 2026, condition: new, planing width 405 mm total power requirement 15 kW Weight 1900 kg Hjdpfxsyk Ibpj Ahzsnp

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2200x900x1700 mm Weight 1900 kg Hnsdpjvz Ezqsfx Ahzep Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2200x1100x1720 mm Hnjdpfx Aevz El Ashzjp Weight 2500 kg Total power requirement 19,5 kw

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, quill stroke: 100 mm, For sale is an Emco tool milling machine, model FB-4. The machine was previously used exclusively for inter-company training purposes. Currently, two identical Emco FB-4 machines are still in stock. Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2005 Control: Heidenhain ND-750 display Technical parameters: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Tool clamping: hydraulic • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle speed: 50 – 2,500 rpm Hnjdpeyvra Ijfx Ahzop • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard cabin (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: ..1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Counter bearing for horizontal machining • Shaft for horizontal machining • Table enclosure (currently removed) • 10x SK-40 tool holders

Condition: good (used), functionality: fully functional, Year of construction: 2022, operating hours: 6,000 h, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Bodor, laser hours: 2,000 h, laser power: 12,000 W, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, power: 12 kW (16.32 HP), input voltage: 380 V, input current: 130 A, type of input current: three-phase, type of cooling: water, total length: 7,000 mm, total width: 2,500 mm, total height: 2,500 mm, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, For sale is a Bodor P3 12kW fiber laser cutting machine in excellent condition. The machine is being sold due to a recent upgrade. The system features a laser power of 12,000 watts and a table size of 3000 × 1500 mm. Year of manufacture is 09/2022. This machine is ideally suited for precise and rapid sheet metal processing in industrial applications. The Bodor P-Series stands out for its high dynamics and speed, with traverse speeds of up to 200 m/min and acceleration up to 1.8G, enabling efficient production workflows. It also offers high positioning accuracy of around ±0.05 mm. Typical cutting capacities (depending on material and parameters) are: Mild steel up to approx. 25–35 mm Stainless steel up to approx. 15–25 mm Hsdpjyr Ddcofx Ahzsnp Aluminum up to approx. 12–15 mm Key technical data (extract): • Laser power: 12 kW fiber laser • Working area / table size: 3000 × 1500 mm • Max. traverse speed: up to 200 m/min • Positioning accuracy: ±0.05 mm • Max. table load: approx. 1,200–1,450 kg • CNC control with touchscreen and nesting software The machine can be inspected and demonstrated by appointment. For questions or if you are interested, please feel free to contact us.

Year of construction: 2005, condition: used, used, excellent condition, little used Manufacturer: Atlas Copco Type: FD 10 CE Year of manufacture: 2005 Machine No.: CAQ179997 CE type-tested Motor: 0.27 kW Volumetric flow: 10 l/s Operating pressure: 14.5 bar New price approx. 2,200 EUR Required space approx. 550 x 600 x 600 mm Hnsdpfxeythc Ee Ahzsp Weight approx. 27 kg Stock location: 97447 Gerolzhofen, free loaded, unpacked Handed over in current condition as inspected, without guarantee or warranty

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X393V02589, Year of construction: 2019, operating hours: 7,179 h, load capacity: 3,500 kg, lifting height: 4,450 mm, free lift: 150 mm, construction height: 2,964 mm, fork length: 2,400 mm, 3,500 kg 3rd & 4th valve fork positioner LPG forklift 7,179 hours No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,450 mm Overall height: 2,964 mm Fork length: 2,400 mm Free lift: 150 mm MACHINE DETAILS Mast type: clear-view mast Dimensions & Weight Dimensions (L x W): 5,300 x 1,350 mm Weight: 4,900 kg Operating hours: 7,179 h EQUIPMENT - Former Linde full-service unit Hnjdpfx Aoyuuytshzsp - Facelift model featuring tilt angle display (useful for handling delicate goods) - Clear-view mast without central hydraulic cylinder - 3rd & 4th hydraulic valve - Fork positioner with side shifter - Full cab with heater and windshield wiper - LED work lights front and rear - Forward-facing camera - Comfort seat with lumbar support and seat heating - LPG gas exchange cylinder (quick to replace, widely available) Note: The engine makes a noise during steering. Optional mast disassembly can be offered by the seller for €950 (net). All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION TERMS Loading from the side with a large onsite forklift (up to 5 t) possible at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior registration Monday to Friday, 7:00–16:30. If the mast is too high for transport, it can be dismantled on request. If collection is not made within the agreed period, a storage fee of €20 per machine per day will be charged (payable before collection).

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Hnedowz Ukyspfx Ahzsp Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: excellent (used), Year of construction: 2021, Semi & fully automatic pallet wrapping machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating mode: Semi-automatic & fully automatic Year of manufacture: 2021/2022 Functions and specifications of the LP-SWA-SERIES Production speed: Up to 35 loads per hour. Load capacity: Maximum load weight: 4,500 lbs dynamic - 10,000 lbs static Maximum load size to safely pass the tower: 67“ x 67” (96“ load diagonal) x 80” H Maximum load size to stay inside the turntable: 46“ W x 46” L (65“ load diagonal) x 80” H Low profile turntable: 65” diameter, laser-cut steel top with all-around deck protection. Maintenance free 54-roller bearing support system. Turntable height 2.813 inches from floor. ANSI No. 50 direct chain drive with chain tensioner. Speed between 3 and 12 rpm with smooth start acceleration Film carriage elevator: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation functions: Fully electric - no pneumatics required Cousins Smart Engineering has developed the A-Arm, an advanced cutting and holding device. It offers significant productivity gains and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting stretch film offers you the following benefits: Hnedpfx Aewb A N Rjhzjp - Selectable banding function at the top - Stabilizes the load early in the wrapping cycle - Places the film end at the top of the load instead of the bottom - There is no film clamp on the turntable that can be damaged by dirt or operator error - and Also, no slip rings are required to power the turntable, reducing maintenance requirements - Load placement on the turntable is not critical - No air connections or noisy compressors - New automatic load detection safety feature on first rotation detects unevenly or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions - A-arm fall protection Control functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) Power off - power on - reset switch and operation indicator Automatic wrapping cycle start/pause with just one button Cycle pause for applying the cover sheets Reinforce the wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Film tension control (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height detection sensor for dark or shiny loads Separate control for 1 to 12 turns top and bottom wrapping Selectable parameters for reduced film tension to wrap the top and/or bottom of the load Non-proprietary UL/CSA approved components A - B - C wrapping program selector with the option of entering and saving individual wrapping parameters for each program Product video 1 Product video 2 Product video 3 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 1999, condition: used, End sheet tipping machine Hunkeler VEA 520 KS - HHS Year: 1999 Description: - Offline production - Photocell protection - Cold glue: HHS C-210 (nozzle) - Hotmelt - Premelter: Robatech Concept 4/2 - Inserting - End sheet tipping - Pressing station - Delivery Max. mechanical speed: up to 8.400 cycles/h Outside gluing max. size: 520 x 310 mm Outside gluing min. size: 100 x 70 mm Hjdpfxex Eblpe Ahzonp Inside gluing (inserting) max. size: 360 x 260 mm

Condition: used, Year of construction: 2007, Aichi rm04b Bj 2007 / 2009/2010/2011 Weight 630kg LxWxH 78x 130 Fits through a door Equipped with CE+ approval and built-in charger Hnodpfxsxcgate Ahzop Ready to use and super powerful

Condition: used, functionality: unexamined, Year of construction: 2015, MAGAZINE LOADER, magazine loading system, magazine loader, shuttle magazine unloader, magazine feeder, magazine unloader, connecting conveyor, magazine loading system for large circuit boards, destacker: YJ LINK ALD-CE SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) (2x) YJ LINK magazine loading system for large circuit boards Size: 1500 x 2850 x 1830 mm (WxDxH) YJ LINK ALD-CE magazine loader This device is located at the beginning of the SMT line. It transfers printed circuit boards (PCBs) stacked in a magazine rack to the downstream machine one at a time using a pneumatic pusher. Touch screen (control panel) Controlled by PLC (Programmable Logic Controller) SMEMA interface YJ LINK AUD-CE Shuttle Magazine Unloader Shuttle Magazine Unloader Located at the end of the SMT line, this device consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) one at a time into an empty magazine rack using a pneumatic pusher mounted on the single shuttle. LED tower lamp (with buzzer) Touch screen (control panel) Controlled by PLC SMEMA interface Integrated single shuttle conveyor YJ LINK ADL-CE Magazine Feeder The YJ LINK ADL-CE is an automatic magazine feeder used in SMT production lines to efficiently load printed circuit boards (PCBs) into magazines. YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ACC-CE Connecting Conveyor Size: 1500 x 610 x 950mm (WxDxH) YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ADL-R90 Destacker Destacker ￭ LED tower signal light (with buzzer) ￭ Touch screen (operator panel) ￭ Controlled by PLC ￭ SMEMA interface ￭ 40 pcs stacking capacity at 1kg ￭ Safety light barrier on the screw ￭ Automatic width adjustment ￭ Double plate structure Transport height: 950mm ± 20mm Color: EX8816(S)-SR-WH020 (KCC) Conveying direction: Left to right / Right to left Fixed rail: Front / Back Hnedjv Hpblspfx Ahzep PCB edge: 3mm PCB thickness: 1.0mm ~ 2.0mm Conveying speed: 200mm/s Conveyor belt: Antistatic 10¹⁰ ~ 10¹², temperature: 70˚C Air supply: 0.5Mpa (5 bar) Air consumption: 4 ℓ/min Power consumption: 430W Power supply: 230V / 50~60Hz, 1 phase

Condition: used, Platform trailer, heavy-duty trailer Industrial trailer with 2-axle swivel steering Manufacturer: PLAN, Type 11 Chassis No: 31361-1 = Year of manufacture 03/2015 Chassis No: 31361-2 = Year of manufacture 03/2015 Payload: 20000 kg Unladen weight: approx. 3760 kg Permissible total weight: 23760 kg Platform height: 850 mm Platform length: 5000 mm (between the tarpaulin frame) Platform width: 2500 mm Overall length: 6100 mm (without drawbar) Overall width: 2500 mm Hnjdpfx Ahsiiumrezjp Tires: Ø 559 x 300 mm (solid rubber tire 559/305-406.4) - 4 wheels with 2-axle swivel steering - Tracking - Swiveling drawbar, drawbar can be bolted on at the front or rear - Drawbar with towing eye size 40 mm diameter - Small turning radius - Very stable outer frame made of U-beams, height 280 mm, width 95 mm - Very stable steel floor made of 10 mm corrugated sheet - Tarpaulin superstructure with steel base frame, can be loaded from the side, max. transport height 2300 mm under the tarpaulin Length for transport: 610 cm (with folded-up drawbar) Width for transport: 250 cm Height for transport: 330 cm (with tarpaulin superstructure) Weight per trailer: approx. 3760 kg Good condition 2 units available Price quoted per trailer

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing cart Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Load capacity: 2 x 500 kg per compartment = 1000 kg Compartment dimensions per slot W x D = 300 x 920 mm Compartment dimensions without center divider W x D = 655 x 920 mm Adjustable height: 80 to 200 mm - Center divider can be removed - Also suitable for flat materials - 16 galvanized steel rollers Ø 50 mm - 4 swivel casters Ø 100 mm, 2 with brakes - Swivel casters individually adjustable in height via threaded rods Overall dimensions L x W x H 1050 x 950 x 615 mm Weight: 85 kg Hsdpefgpfpofx Ahzjnp Good condition

Condition: good (used), first registration: 05/2021, total length: 8,800 mm, total width: 2,550 mm, total height: 3,200 mm, color: silver, Year of construction: 2021, Unladen weight: 6,360 kg Payload: 27,640 kg Gross vehicle weight: 34,000 kg Tipper: Rear tipper Hnodpfsx Sxndjx Ahzop Technical condition: Good Visual condition: Good CARNEHL TIPPER SEMITRAILER 2-AXLE TIPPER SEMITRAILER AIR SUSPENSION BPW AXLES LIFT AXLE HARDOX STEEL TIPPING BODY DRUM BRAKES UNLADEN WEIGHT 6,360 KG TIPPING CYLINDER MOUNTED AT FRONT REAR TIPPING HYDRAULIC TAILGATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH

Condition: good (used), first registration: 11/2021, total length: 8,800 mm, total width: 2,550 mm, total height: 3,200 mm, color: silver, Year of construction: 2021, Unladen weight: 6,360 kg Payload: 27,640 kg GVW: 34,000 kg Technical condition: good Visual condition: good CARNEHL TIPPER SEMI-TRAILER 2-axle tipper semi-trailer Air suspension BPW axles Lift axle HARDOX steel tipping body Drum brakes Hnedpfxox Sxm Tj Ahzop Unladen weight 6,360 kg Front-mounted tipping cylinder Rear tipper Hydraulic tailgate FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH

Year of construction: 2022, condition: as good as new (ex-display), Slider length: 3200 mm Hnsdpfx Asid Ig Ajhzsp Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 170 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 500 mm Spindle speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Dust extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Condition: good (used), Rotex / Gradex particle size analysis Particle Size Analysis Weight: 1350kg Voltage: 220V Hnedpfx Ajxg Rmxehzjp

Condition: new, sheet width 4100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German Hnsdpfx Ajxabwujhzjp including special equipment: - pneumatic sheet metal holding device * Monoblock design