Used Collet-Engelhartd Minor for sale (1,320)

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm Pedpey T Hqcsfx Afgopt >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, Year of construction: 1986, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, I am offering for sale: WMW coordinate drilling machine / Heckert Mikromat 4B. A folder containing an operating manual and a box with tapered collets, etc., are included. The mechanical condition is excellent; however, there are some paint chips and oil stains on the exterior. Digital X/Y display. According to the manufacturer's specifications, the largest drilling diameter is 100 mm. The accuracy of the coordinates along the x and y axes is 0.001 mm. The accuracy of the coordinate setting is 0.002 mm. Ppjdjy Ucckjpfx Afget The machine weighs approximately 2 to 2.2 tons and must be picked up by the buyer, or the pickup must be arranged by the buyer. I cannot assist with loading, and I do not have a forklift. The pickup/transport should be handled by a professional "machine transport company" with a forklift, heavy-duty rollers, etc. Only a hydraulic heavy-duty jack is available for this purpose.

Condition: good (used), Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm Ppjdpfx Asb A Hfcjfgjt -Bolt circle: 174 mm -Milling spindle: 45° -fully swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 92,000 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. Pedpfx Afsylw Dcogept • C-axis on main and counter spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in control cabinet • Transmit-/Tracyl function • MDE interface (machine on, machine running, parts counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming system • Control cabinet cooling unit • Main spindle D65 • Counter spindle D60 • Coolant flushing of counter spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) bottom and top • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Portal unloading device with actuated gripper, NC-controlled • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion use) • High-pressure pump 80 bar • Workholding: • Collet chucks for draw tube, HAINBUCH (main and counter spindle) • Power chucks D210 with quick jaw change, Schunk (main and counter spindle) • Stop device • Optional: large number of powered tool holders and spare parts warehouse

Condition: good (used), Year of construction: 2019, operating hours: 2,900 h, functionality: fully functional, spindle motor power: 11,000 W, type of input current: three-phase, overall weight: 4,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this well-maintained ARIX TMD 60CL CNC lathe, year of manufacture 2019. Manufacturer: ARIX Model: TMD 60CL Date of manufacture: 10.2019 Ppedpfx Aoyu U Anefgjt Serial number: 19102063 Spindle power: 11 kW Weight: 4,500 kg with sub-spindle and Y-axis including short bar feeder Fedek DH65S2 collet chuck 173E, and collet chuck 163E on the sub-spindle If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,752 h, functionality: fully functional, Equipment: documentation/manual, We are offering this ready-to-use GILDEMEISTER CTX 200 series 2 CNC turning and milling center, year of manufacture 2001. Ppedpfx Aoyu Uytjfgst Manufacturer: GILDEMEISTER Type/Model: CTX 200 series 2 Contrary to the photo, the machine is sold with a three-jaw chuck and not a collet chuck; various VDI20 toolholders are included as well. The short bar feeder has not been in operation for a long time, so its condition is unknown. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1986, SOE reamer grinding machine with projection measuring device. Accessories: collets, various grinding wheels. In good, operational condition. Psdpsy Tuhvjfx Afgept

Condition: new, Year of construction: 2021, weight / kg taper MK / Material: iron 200x60x150mm Ppodpfx Afoy S Dxhoget Opening size: 150mm Magnetic force: 10-20kg Inventory: 4

Condition: used, functionality: fully functional, mileage: 287,207 km, gearing type: automatic, fuel type: diesel, fuel tank capacity: 14,000 l, color: white, overall weight: 14,000 kg, empty load weight: 14,000 kg, operation weight: 14,000 kg, lifting height: 32,000 mm, tire condition: 90 %, drive condition: 100 %, chain condition: 100 %, number of seats: 2, Year of construction: 2002, Volvo FM9-43 2002 - Ready to Work! For sale: Volvo FM9-43, year 2002, in excellent operating condition. The truck is fully operational with no mechanical faults. All maintenance has always been performed on time and thoroughly, and it has consistently passed all inspections successfully, with no outstanding issues. ✅ Key features: Fully functional and ready for work Maintenance up to date Inspections always current Robust chassis, ideal for mixer, tipper, or general transport Ppjdey R A Sqjpfx Afgot The vehicle shows normal signs of use (scratches, minor marks, and typical wear for a 2002 truck), but nothing that affects its performance or reliability. This is an honest Volvo, well maintained with a good service history. A robust, durable truck with an excellent price/performance ratio. Perfect for those seeking a reliable machine for daily work.

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 Podpfxjy Tplio Afgept speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard Pedpfx Aey Tmkvefgept >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,400 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,880 mm, total width: 3,680 mm, table load: 1,800 kg, overall weight: 9,100 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of axes: 3, This 3-axis Quaser MV-204 CP vertical machining centre was manufactured in 2007. It features a working area with X-axis travel of 1200 mm, Y-axis travel of 700 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1400 x 700 mm and a maximum table load capacity of 1800 kg. If you are looking to get high-quality milling capabilities, consider the Quaser MV-204 CP machine we have for sale. Contact us for further details. • Machine table: 1400 x 700 mm • T-slots: 6; width 18 mm; spacing 100 mm • Distance table to spindle nose: 150–760 mm • Spindle type: WEISS WB-40R • Spindle torque: 192 Nm • 20 bar inner cooling through spindle (IKZ) • Tool changer: 30 positions • Utilities: compressed air 6 bar; voltage 400 V; mains fuse 63 A; connection cable cross-section 4 x 16 mm² • Usage/condition notes: • Spindle collision in 2018; spindle functions for plastics, but spindle condition should be assessed • Machine out of operation for approximately 6 months due to new purchase • Spindle hours: 8,400 Ppjdpfx Afsyw S Disget Additional equipment • Coolant system with 600-liter tank • Chip conveyor • Heidenhain handwheel HR410 • Various milling chucks • Haimer shrink-fit chuck • Slimline base holder for DuoBlock • Various collet base holders (without collets) • Albrecht drill chuck • Haimer dial gauge • Complete machine documentation Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 5,500 W, spindle speed (max.): 7,000 rpm, overall weight: 2,900 kg, controller manufacturer: FANUC, controller model: 18i-TB, number of axes: 7, This 7-axis TSUGAMI BS32CE-V was manufactured in 2008. It features a maximum turning diameter of 32 mm and a turning length of 250 mm. The machine is equipped with two spindles, offering main spindle speeds of 200 – 7000 rpm and sub-spindle speeds of 200 – 6000 rpm. If you are looking to get high-quality turning capabilities, consider the TSUGAMI BS32CE-V swiss type turning machine we have for sale. Contact us for further details. • Condition: Very good; low number of hours • Power-on hours: 28,538 • Spindle hours: 9,190 • Number of spindles: 2 • Max turning diameter: 32 mm • Max turning length: 250 mm • Max drilling diameter: 12 mm • Max threading diameter: M10 • Sub-spindle speed: 200–6000 rpm • Sub-spindle motor power: 2.2 kW • C-axis: 360,000° • Spindle nose: for F37 collet • Tooling/Stations: • Number of stations: 4 • Number of tools: 20 • Number of live tools: 5 • Turning tools: 5 • Drilling tools: 6 • Cross machining tools: 4 • Live tool speed: 200–5000 rpm • Live tool power: 0.9 kW • Working feed: 1–6000 mm/min • Rapid feed: 20 m/min • Dimensions (machine, without bar feeder): 2150 × 1500 × 1800 mm Additional equipment • Bar feeder: IEMCA BOSS 332L • Chip conveyor • Parts catcher • Short part ejector • Bar puller • Work light • Set of collets • Serial port interface RS232 • 3-color status light Psdpfx Aeyq Nwxsfgopt • Documentation

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min Pjdjwwwr Eepfx Afgopt total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1978, x-travel 300 mm y-travel 160 mm Ppjdpfewl N R Nsx Afgot z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA weight of the machine ca. 5,7 t dimensions of machine L x W x H 3,65 x 2,03 x 2,1 m Accessories: collet fixture HAINBUCH on main spindle, Psdjx I Sfnopfx Afgspt 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: used, Year of construction: 1996, swing diameter 530 mm turning diameter 150 mm spindle passage 65 mm control SIEMENS 840 C travel x1 175 mm travel y1 +/- 70 mm travel z1 433 mm travel x2 175 mm travel y2 +/- 70 mm travel z2 433 mm spindle turning speed range 38 - 4000 U/min C-axis 2 x tool turret 2 x 12 Pos. number of driven tool stations 2 x 12 Ppjdpfovh Nbnex Afgot tool shaft (cylinder shaft DIN 69880) VDI 30 total power requirement 33 kW dimensions of machine L x W x H 3,95 x 2,49 x 2,6 m Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components Ppedpfx Afsyc Ig Asgjt • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: new, • EPB Graflex A700 60 boring head • Made in France • Working range: • Capacity 1: 85–115 mm (3.345–4.530”) • Capacity 2: 114–144 mm (4.485–5.670”) • Precision adjustment 0.01 mm (0.0004”) • Catalogue no.: 1605.014.24 • Graflex system – for professional applications • The head is in storage condition • No evidence of use. Only minor storage scratches • Sockets and scales in perfect condition • Mechanism operates smoothly and easily Ppodpsw Rdybjfx Afgot • Ready for immediate use • EPB Graflex stands for proven quality and reliability

Condition: excellent (used), For sale: Professional SK40 tool holder from the renowned manufacturer FAT (Fabryka Automatów Tokarskich). Model: 40.300.10 – Ø10×50. The holder is in very good technical condition and ready for use. The set includes a mounted tool (drill or milling cutter – see photos). Clamping type: SK40. Collet: Ø10 mm. Clamping length: 50 mm. Manufacturer: FAT / FATool. Condition: used, fully operational, ready for work. Please note, several units are available, all in the same Ø10×50 size. Ppodpfxsxcg Hyo Afgst

Condition: excellent (used), For sale: Single TC40xER16x100-AD tool holder (SK40 standard) from the renowned brand ZÜRN – Germany. Each tool holder is complete, equipped with an ER16 collet and a mounted tool (drill or milling cutter – see photo). Tool holder type: TC40xER16x100-AD (SK40). Collet: ER16 – ZÜRN Germany. Working length: 100 mm. Manufacturer: Made in Germany. Tool included – ready for use. Very good condition, original, tested. Applications: CNC machining centers, milling machines, tool workshops. Ppjdpfx Afexcb Daogot

Condition: excellent (used), Collet chuck from the renowned brand GARANT (Hoffmann Group) – guaranteed top quality and reliability in CNC machining. Model SK40-12-50, catalogue number 300100 12. • SK40 taper – industry standard for machining centres • Clamping diameter Ø12 mm • Chuck length 50 mm • Max. RPM 25,000 • High precision and dynamic balancing • Supplied with a mounted end mill. Very good condition, ready for immediate use. Professional tool for CNC milling machines, ideal for workshops that value quality and reliability. Pedpfx Afew Sy Ansgopt -- PRICE LISTED IS FOR 1 PIECE --

Condition: excellent (used), Complete, professional HOLEX tool holder for sale, designed for micro-drilling and precision machining. Technical specification: • Manufacturer: HOLEX • Reference: 300520 16 • Model: SK 40-1/10-100 Psdjw Rd Swjpfx Afgspt • Length: 100 mm • Collet: ER16 with HOLEX nut (marking G 6.3 / 15,000 rpm visible) • Spindle: SK40 • Max torque: 70 Nm • Balancing: G 6.3 / 12,000 rpm • Year: 11/10 • Included: micro drill – mounted and ready for operation Very good technical condition – the collet holds securely, drill is undamaged. Ideal tool for highly precise operations in electronics, medical, or toolmaking applications. Shipping or personal pickup available.

Condition: new, For sale: Industrial set used in welding applications by CLOOS – a renowned German manufacturer of automation systems. The set includes: Ppodpfx Asw Rdyzsfgjt Hollow shaft (Hohlwelle kurz für W) • Identification: SA-Nr 455799, part number • Robust, steel construction • Production date: 25.05.2018 • Very good technical condition, stored, minor surface corrosion traces Large mounting bracket/adapter (visible positioning sockets) • Heavy-duty, solid construction • Designed to work with the shaft – precise positioning/rotation of workpieces • No play, everything holds firmly • Coded mounting and internal passage Ideal set for: • welding positioners • industrial robot arms • adaptation of drives and gearboxes

Condition: excellent (used), For sale: Professional SK40 ER40 tool holders from renowned manufacturers including Diebold and ZÜRN – Germany. Complete holders, some equipped with collets and tools (drills, milling cutters, taps). Holder type: SK40 – ER40. Models include: TC40xER40x70-AD. Manufacturers: Diebold / ZÜRN Germany. In very good condition, technically sound – ready for use. Robust, precise design and German premium quality. Applications: CNC machining centers, milling machines, tool workshops. Ppodpfx Ajxcbxqsfgot