Used Continuously Turning Polishing Machine for sale (69,110)

Condition: used, Year of construction: 2002, Technical details: turning diameter: 200 mm turning height: 120 mm Tjdor Dwpmepfx Aklea weight of the machine ca.: 18 t Available from 01.08.2024 *

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tedpfx Akexf Uwxslja Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit Tsdpfowz Rifsx Aklja - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 1982, Multi-spindle lathe Brand: TORNOMAT Tedpfjyll Atjx Aklja Model 2 C

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW Tjdpfx Akjw Au A Ejlsa (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + Tjdpfx Akew Avptelsa 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Year of construction: 2003, condition: ready for operation (used), An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible. Tsdpfx Aevva Hkoklea

Year of construction: 2019, condition: ready for operation (used), A belt washing machine is available for pre-washing and feeding food into downstream machines. Input height: 1000mm, output height: 1000mm, machine dimensions X/Y/Z: approx. 4600mm/1500mm/1500mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Todpfx Akju Tiyvolja

Year of construction: 2004, condition: ready for operation (used), A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible. Tedpsygmdbjfx Aklea

Year of construction: 2010, condition: ready for operation (used), Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible. Tjdpexyk Trsfx Aklea

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible. Tjdpfx Aket Ambwjlea

Year of construction: 2002, condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Tsdoubyy Njpfx Aklsa

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Tsdexg Rhpspfx Aklja

Year of construction: 2019, condition: ready for operation (used), A Göztepe belt cooling machine (cooling tunnel), which was used to extend product life, is available. Motor power: 4kW, inlet height: 1670mm, outlet height: 1150mm, base distance: 2000mm, working length: 8500mm, machine dimensions X/Y/Z: approx. 8600mm/1900mm/2600mm. Documentation available. On-site inspection is possible. Tjdpfxeu Tiy Aj Aklsa

Condition: used, Year of construction: 2014, swing diameter 210 mm turning length 210 mm weight of the machine ca. 13 t Feed diameter: 160 mm Workpiece diameter: max. 63 mm Workpiece length: max. 400 mm Workpiece weight: max. 10 kg Travel distances: X-axis: 340 mm Z-axis: 625 mm Main spindle power: 40%/100%, 34/26.5 kW Torque 40%/100%, 144/112 Nm Speed: max. 6000 rpm Tjdpfx Aksyan Rislja Turret tool positions 2 x 11 (1 gripper) Rapid traverse speed X/Z: 30/30 m/min Spindle size: KK5 Circular diameter: max. 210 mm Workpiece diameter: max. 63/100 mm Tailstock pin: MK3, 120 N/bar Stroke: 5 mm Operating voltage: 400V Control voltage DC: 24V Control voltage AC: 230V Frequency: 50 Hz Electrical equipment: VDE 0113

Year of construction: 1992, condition: used, You can check under power, after scheduling an appointment. Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár. TSUGAMI NP-32 CNC Lathe Machine Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Turrets Number of turrets 2 Number of tool-mounting stations 12 (6 stations x 2) Number of rotary-tool-mounting stations 12 (all stations on front and rear turret) Tool sizes Turning tools 16 (square) x 80 mm Drill-holder hole diameter 35 mm Indexing method Random Rotary-tool spindle speed For heavy cutting 224 to 2,240 rpm (stepless) For high-speed cutting 475 to 4,750 rpm (stepless) Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Sub-spindle Maximum thread diameter M12 (brass) Machining diameters 8 to 32 mm Spindle stroke (Z2-axis) 215 mm Spindle speed 300 to 3,000 rpm Spindle motor 1.5 kW 4P (inverter) Motors For main spindle 5.5/7.5 kW (AC spindle motor) For attachment drive: Front 0.75kW 4P (inverter type) Tsdpoidqvcjfx Aklsa Rear 1.5kW 4P (inverter type) For hydraulic motor 0.75kW 4P For coolant pump 0.25 kW For lubricating-oil pump 4 W Tanks For hydraulic oil 30 liters For coolant 150 liters For lubricating oil 2 liters Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Freight basis: EXW, unpackaged

Condition: good (used), Year of construction: 2001, The system can also grind miters. Connection value: 20.5kW Total length: 12500mm Todpfx Akeiqghzoloa

Condition: used, Year of construction: 2009, functionality: fully functional, Offered is a turning and milling machine EMAG VLC 800 MT with tool changer. The machine has a turret with 12 tool positions (VDI 50) and a milling spindle with tool changer for up to 96 tools. The tool magazine can be loaded during processing, which reduces setup time and allows the use of sister tools. The proven EMAG turret is available for turning operations on the machine. Tedpfsw Au U Uex Aklja On the multifunctional VLC 800 MT production center, workpieces up to 800 mm in diameter can be completely processed in a single clamping. The following components will be sold with the machine: - Pick-up station - Extraction unit (IFM) - Coolant system with belt filter - Chip conveyor CONTROL Siemens 840D MACHINE CONNECTION Mains voltage: 400V AC 50 Hz Connected load: 92kW Rated current: 143A Max. backup fuse: 160A The machine is sold on an “as seen” basis, without any warranty claims. The machine will be available from November 2025, machine is in production until Oktober. The machine can be completely overhauled on request. Please do not hesitate to contact us fot further information.

Condition: new, Equipment: rotational speed of tool magazine infinitely variable, Heavy grey cast iron machine bed for optimal smooth running and stability when working with unbalanced workpieces Headstock can be moved along the entire machine bed, rotatable by 360° with detents at 0, 30, 60, 90, 135, 180, and 270 degrees Variomatic speed control, infinitely adjustable from 280 to 2500 rpm via rotary knob at the end of the headstock Integrated spindle indexing device 36 x 10° Spindle lock at the front of the headstock for easy changing of workholding fixtures Todpfow A Rqfex Aklsa Double wedge clamp for tool rest and extension arm, particularly slip-resistant and efficient Tailstock with robust trapezoidal thread, 108 mm quill travel with scale, 9 mm through hole

Condition: excellent (used), Year of construction: 2015, operating hours: 11,100 h, functionality: fully functional, machine/vehicle number: NTX1150102, Year 2015 with F31iB5 control and CELOS Country of manufacture: JP Voltage: 380V/50Hz/3ph Dimensions: 4169x2543x2543 mm Net machine weight: 10,000 kg TECHNICAL SPECIFICATIONS Control: Fanuc F31iB5 with CELOS Main spindle: X1 axis: 455 mm Y axis: +/- 105 mm Z1 axis: 800 mm (+165 for ATC) B axis: 240° Turret 2: X2 axis: 160 mm Z2 axis: 730 mm Spindle 1 / Spindle 2: C axis: 360° / 360° Tailstock: A axis: 820 mm Max. distance between centres: 1,050 mm Max. turning diameter Main spindle: Ø 430 mm Turret 2: Ø 274 mm Tedpfxjw T Snfo Aklsa Max. turning length: 800 mm Bar diameter: Ø 52 mm . Ø 65 mm Unless otherwise specified or in case of errors or omissions, the technical data is provided without commitment.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Tsdpjw T Sn Esfx Akloa Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles Tjdsyrr Uvepfx Akloa 3 upper bevelling spindles 3 lower bevelling spindles automatic lubrication 2 roller tables of 2mt. each Very good condition

Condition: new, -new-Zum sanding from nahezu allen work piece-formen about Bürstwerkzeuge or Lufttrommel(gerade, runde, gebogene Profile etc.)- Massivholzschliff- intermediate lacquer sanding- Bürsten- polishing- different Schleifmittel einsetzbar durch30 mm tool receiver- Optional with variabler rev adjustmentTechnische Daten:motor performance: 2,2 kWrpm: 1000/1500 or 1500/3000 rpmshaft diameter: 30 mmMax. abrasive product: 350 mmSchleifkörperlänge: 275 mmweight: ca. 180 kgArt.-No. 1090-900000inclusive:1 piece rpm infinitely variable adjustable No. 1090-9900102 piece Vario ModularD. 300 mm, B. 250 mmNo. 1090-990107located in  97447 Gerolzhofensale in current condition as seen- free on truck - Todpfx Asvwf Snjkloa

Condition: used, Year of construction: 1988, used, good condition cleaned, tested manufactured by Johannsen type T 45 built in 88 number of aggregates R + L Lon motor 1,5 kW exhaust connection D 140 mm required space ca. l x w x h mm 1000 x 500 x 1000 weight ca. 130 kg total connected power ca. 1,5 kW located in 97447 Gerolzhofen Todpfx Akevwf Trsloa sale in current condition as on Foto seen - free on truck -

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 Tsdpfxsx I A Hpe Akloa MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder