Used Esterer Dkn for sale (200)

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: Seriennummer: 71040038, Unit 1: • Manufacturer: PBI Dansensor • Model: LeakPointer • Serial Number: 71040038 • Year of Manufacture: 2004 • Purchased: 2011 (as used equipment) Lasdpfx Ajxxw Tijiisb • Purchase Price: Unknown, invoice not available. • Documentation available Weight: 50 kg

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: • Seriennummer: 71110476, Device 2: • Manufacturer: PBI Dansensor • Model: LeakPointer • Serial number: 71110476 • Year of manufacture: 2011 • Purchased: 2013 • Purchase price: Unknown, invoice not available. • Documentation available Laodpfx Aoxxxa Doiiob Sale price: 500 EUR per device.

Condition: good (used), Stock number: 2938 Manufacturer: Wolpert Year of manufacture: 1960 Type: Testor HAT 1E Test method: Rockwell 150 kg Brinell 250 kg (?) Table diameter: mm Projection: 125 mm Test height: 200 mm Laedevcbu Aspfx Aiieb Accessories: Machine is without table Weight: approx. 70 kg Machine dimensions: 200 x 400 x 700 mm Condition: good

Year of construction: 2025, condition: excellent (used), functionality: fully functional, Insulation Tester Fluke 1555, 10KV Lasdjxr A Rtspfx Aiiob Digital insulation measurement up to 10 kV, ideal for testing a wide range of high-voltage installations.

Condition: used, TECHNICAL DETAILS - Brinell tests 3000 Kg and 750 Kg, HB according to DIN EN ISO 6506-01 - Test height with table : 0 - 610 [mm] - Test height without table : 370 - 1.120 [mm] - Clamping surface on table : 500 x 600 [mm] - Clamping surface on sole : 810 x 1.425 [mm] - Reach : 310 - 1.095 [mm] - Arm swiveling : 220 [°] - Test group swiveling around its axis : 180 [°] - Vertical stroke of the test group : 750 [mm] - Floor space (except hydraulic unit) : 810 x 2.155 [mm] - Height : 3.500 [mm] - Weight : 4.000 [kg] - Voltage : 3x 400 [V] - Frequency : 50/60 [Hz] - Installed power : 3,5 [kVA] EQUIPMENT - Control panel : Stiefelmayer - Optical measuring system : Zeiss - Measuring electronics HM-Control - 2 measuring rules of imprint size : Heidenhain - Warning lights : good / outside the tolerance range - Statistic function - Exit for PV printing - Table Ljdpfouhb Iusx Aiijab - Hydraulic unit

Condition: used, TECHNICAL DETAILS Lajdpfx Aiouhb I Isiob - Durometer for production line control of soft rubber and elastomers and all natural rubber products.

Condition: used, brinell hardness:260 mm rockwell hardness:220 mm Lsdpfx Aocxxzaeiioab throat:150 mm micro head enlargement:70-fach :187,5 kg checking height:max. 250 mm weight of the machine ca.:0,25 t dimensions of the machine ca.:0,3 x 0,55 x 1,02 m semi-automatic machine for serial and single tests according to Vickers and Brunell, with projection-measuring unit on machine head, electronic load-time adjustment, shock-resistant loading via angled suspension, very good condition

Condition: excellent (used), TESCOM TC-2300A DAB/DMB Tester by OEM Laedpfxswpgnyj Aiijb

Condition: used, functionality: fully functional, VanKel VK7000 Dissolution tester. The dissolution tester of the brand Vankel type VK7000 is designed for in vitro monitoring of the rate and extent of drug absorption which are dependent on the dosage form. This dissolution tester can be used for optimization of therapeutic effectiveness during product development and stability assessment and for the evaluation of production quality to guarantee uniformity between production parties. Technical specifications: Ledpsuax Txofx Aiisab Voltage: 115V, 60Hz Power: 3A Temperature range: 0 °C – 75 °C Speed: 10 – 250 rpm External dimensions (W) x (D) x (H): 62.5 x 53.5 x 93 cm Technical specifications Vankel VK750 controller Voltage: 115V, 60Hz Current: 15A External dimensions (W) x (D) x (H): 18.5 x 36.5 x 19.5 cm Good working condition. Please check out our other listings as well.

Condition: used, Manufacturer: Wolpert Laodpfx Aoxcu Rajiiob Type: 751 N

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. Ljdpfxen E S T Uo Aiieab HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: is/m, overall weight: 2,000 kg, total length: 500 mm, total width: 300 mm, total height: 200 mm, input voltage: 380 V, type of input current: three-phase, La scie à mousse verticale Baumer Type ISM (modèle IS-M) est une machine automatique de découpe de mousse de haute précision fabriquée par Albrecht Bäumer (Allemagne). Avec sa tête de coupe mobile et sa table fixe, elle offre une excellente rigidité et une précision de coupe exceptionnelle, idéale pour le rognage de blocs et la production de plaques ou coupes rectangulaires dans l’industrie de la mousse. Caractéristiques techniques principales (modèle standard IS-M) : Dimensions utiles bloc : largeur 1 250 mm (options jusqu’à 2 500 mm), hauteur 1 300 mm (options 650 / 1 500 mm), longueur 2 200 mm (options 2 500 / 3 100 mm). Vitesse de coupe maximale : 40 m/min (réglable en continu selon le matériau). Lame circulante affûtée de précision (largeur 6 à 20 mm) – disponible en version lisse, dentée ou avoyée (set knife) pour mousses dures ou isolantes. Coupe possible dans les deux sens pour minimiser les temps de production. Butée latérale droite motorisée + butée gauche rabattable (facilite le chargement). Table de travail en aluminium anodisé avec possibilité de système de coussin d’air (option). Unité de meulage motorisée automatique + tension pneumatique de la lame. Guide de lame motorisé réglable en hauteur pour une coupe encore plus précise près du bloc. Matériaux compatibles : Mousses PU souples (éther, ester, HR, viscoélastique, réticulées), mousses PE, EVA, caoutchouc mousse, latex, EPDM, laine de roche/verre, Basotect®, mousses dures PU, EPP, etc. Parfait pour l’industrie du matelas, de l’ameublement (coussins, sièges), de l’emballage protecteur et de l’automobile. Avantages de la Baumer IS-M : Très haute précision de coupe avec tolérances minimales et faible vibration (construction soudée ultra-stable + guides linéaires). Laedpfx Aoywrz Uoiisb Réduction des chutes grâce à la coupe bidirectionnelle et à la technologie de nesting Bäumer Cube (jusqu’à -17 % de perte). Facile à utiliser : un seul opérateur, interface Siemens moderne, SOPHIEaccess pour la connectivité. Robuste et fiable : pièces de haute qualité, maintenance simplifiée. État de la machine : Excellent état (année 1988, bien entretenue). Lame de 11 850 mm, hauteur de coupe environ 1 200 mm, plateau environ 2 200 x 2 800 mm, coupe bidirectionnelle. Machine vendue en l’état, prête à l’emploi après vérification. Cette machine est recherchée dans le monde entier sous les termes : Baumer ISM foam cutting machine, vertical foam saw Bäumer, scie verticale mousse Baumer IS-M, découpe mousse occasion.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Sawmill Line Equipment for Sale We are offering for sale part of a sawmill production line (the EWD band saw has already been sold). The following equipment is available: - Complete conveyor systems - Esterer edging saw (year of manufacture: 2000) - Multi-rip saw (250 kW German motor, year of manufacture: 1992) - SDOP 600/3 drum chipper (year of manufacture: 2010) Laodpfxsyyv Udj Aiijb - Full conveyor system for sorting sawdust and offcuts into the chipper The line has been in operation until 02/2026 and is fully functional. ✔ Available as a complete set or as individual machines. For more information, please contact us via email or WhatsApp.

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), fuel type: diesel, color: orange, Year of construction: 2025, Vehicle: Engine: OM936 200kW/272HP, 1100Nm, Euro 6 Year of manufacture: 2025 Mileage: Operating hours: Color: Orange Tyres: 385/65 R22.5 TL Nordic STEER "K" Equipment: AZ1 axle ratio I=6.377 Anti-roll bar Trailer brake, 2-line Rear mounting brackets Mounting components for spreading machine on platform body Wheelbase 3350mm Front mounting plate EN15432-1, Type F1/C Side underrun protection Air-sprung driver's seat with seat heating Additional left steering column switch Right armrest with control lever mount, driver’s seat Plug-in control lever on the driver's seat armrest Universal holder for external control unit Laterally movable center console, additional storage compartment Air conditioning Additional hot water heating for cab and engine Permanent power sockets 12V (C3), 12V and 24V in center console 24V/25A on-board socket in cab, with C3 signal Reversing camera at rear of towing vehicle Monitor for camera system Universal electric interface according to EN16330 Pre-wiring for Uni-Touch interface, front Pre-wiring for Uni-Touch interface, rear 24V switchable power supply in roof ABS trailer socket 24V, 7-pole/5-pin Trailer socket 12V, 13-pole Front socket, 7-pole Device socket, 32-pole Cabin strength according to ECE-R-29/03 External sun visor, transparent Windscreen, clear, heated Gearbox oil filter Hydraulic-transmission oil cooling, oil/air MB fully synchronized reversing gearbox UG130, 8 forward/6 reverse gears Easydrive (hydrostatic drive) Automatic Shift (EAS), two-pedal operation Hydraulic oil level warning indicator Hydraulic system, 2-circuit, 3-cell, fully prepared, snow plow discharge Hydraulic connector rear, 4-fold, cell 1+2 Pressure line rear, 2nd hydraulic circuit Separate return line rear Carboxylic acid ester for hydraulic system Uni-Touch operating system with 10.5" touchscreen Preparation for mobile phone (12V) Combination instrument 12.7 cm with video function Seatbelt warning, driver and passenger side Radio with USB and Bluetooth Truck Data Center 8 Driver assistance chart, Europe region Preparation for Truck Data Center 8 Ledpeyn Iliefx Aiisab AdBlue tank 25L Flashing beacon, LED, yellow, left and right, with tripods LED high beam LED work lights rear top Headlights height adjustable Engine OM936, R6, 7.7L, 200kW/272HP, 1100Nm Engine version EURO 6 High Performance Engine Brake Clean-Fix quick radiator cleaning system Engine PTO including front PTO Flatbed body, internal dimensions 2650x2200x400 Platform subframe Increased towing capacity, ZAA max. 20t Towing hitch, heavy duty, Ringfeder, pin 38.5 Tubeless drop centre rims 11.75x22.5 ET 135 Warning stripes red/white Warning triangle and warning light Attention Assist Traffic Sign Assist Tire pressure monitoring Sideguard Assist 2 Frontguard Assist Preparation for alcohol immobilizer -TX3 weight variant 16.5t -V0Q vehicle specification according to GSR, Phase B -XD2 manufacturer's warranty 2 years from registration/commissioning The offer is based on our general terms and conditions!!! Sale only to commercial customers!!! If you have any further questions, I am at your disposal. For inspections and/or test drives, please arrange an appointment in advance!!!

Condition: used, mileage: 314,197 km, power: 324 kW (440.52 HP), first registration: 02/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro4, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGA 26.410 3-Compartment Tanker ?TOP/BOTTOM LOADING? LIFT AXLE ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST ----VEHICLE FEATURES & DIMENSIONS * WHEELBASE: 1ST TO 2ND AXLE APPROX. 4 M Lsdpfx Aewx T Hbsiieab * WHEELBASE: 1ST TO 3RD AXLE APPROX. 5.40 M COMFORT & INTERIOR EQUIPMENT * ELECTRIC WINDOWS * AUTOMATIC CLIMATE CONTROL * SEAT HEATING * SEAT VENTILATION * CRUISE CONTROL * MANUAL SUNROOF * ARMREST LIGHT SAFETY & DRIVER ASSISTANCE * ABS * TRACTION CONTROL (TC) * DIFFERENTIAL LOCK * EMERGENCY SHUT-OFF SWITCH * RETARDER * 2X FIRE EXTINGUISHER MOUNT DRIVELINE & TECHNOLOGY * AUTOMATIC TRANSMISSION * PTO (POWER TAKE-OFF) * FIXED TRAILER COUPLING * TANKER CONTROL UNIT AXLES & SUSPENSION * THIRD AXLE: LIFT AXLE * FRONT: LEAF SPRING SUSPENSION * REAR: AIR SUSPENSION BODY & EXTERIOR * HEATED SIDE MIRRORS * ASW FRONT/REAR (AXLE SHIFT WARNING OR SIMILAR) * TOP/BOTTOM FILLING * TYRES 315 / 80 R 22.5 ----BODY BUILDER DETAILS * MANUFACTURER: DR.-ING. ULRICH ESTERER GMBH & CO. KG * ADDRESS: 34298 HELSA / GERMANY REGISTRATION DETAILS * REGISTRATION NO.: D/HE/03/03(T) * MANUFACTURER NO.: 16848 * YEAR OF MANUFACTURE: 2007 TECHNICAL DATA * TEST PRESSURE (TOTAL): 0.25 BAR * TEST PRESSURE (COMPARTMENTS): 0.25 BAR * TOTAL CAPACITY: 20,580 LITRES * COMPARTMENTS: 3 * COMPARTMENT 1: 7,670 LITRES * COMPARTMENT 2: 8,960 LITRES * COMPARTMENT 3: 3,950 LITRES ----HOSE REEL SYSTEM * TYPE: N51 * SERIAL NO.: 120400-2 * YEAR: 2007 * CE MARKING: YES * MANUFACTURER ADDRESS: BAHNHOFSTRASSE 18, 34298 HELSA, GERMANY * TYPE: N55EK * SERIAL NO.: 120400-3 * YEAR: 2007 * CE MARKING: YES * MANUFACTURER ADDRESS: AS ABOVE TECHNICAL SPECIFICATIONS * MAX. OPERATING PRESSURE: 80 BAR * ALL-HOSE I (MAX. DN): 38 MM, MAX. LENGTH: 60 M * ALL-HOSE II (MAX. DN): 45 MM, MAX. LENGTH: 30 M * MINIMUM SALES QUANTITY: 200 LITRES ----IMMEDIATELY AVAILABLE! ---- * EXPORT SALES ONLY WITH SECURITY DEPOSIT (MIN. €500 - €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30-DAY LICENSE PLATES, AND 17-21 DAYS AUSTRIAN LICENSE PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit/guarantee of at least €500 / €1,000 will be required. Modifications, mistakes, and prior sale reserved! You can find more vehicles on our website. Sale exclusively in accordance with our General Terms and Conditions – see website Important Notice – Please Note: Despite meticulous review, errors may occur in our offers. Some errors are due to data transfer between platform provider systems. Therefore, all information is provided without guarantee and does not constitute a legal claim. Legal: This advertisement does not constitute an offer within the meaning of §145 BGB (German Civil Code). It is provided for information purposes regarding contract initiation. All information is non-binding and does not represent warranted characteristics.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Lajdogcw Rmepfx Aiieb Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Lodsyh S Aispfx Aiijab Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Lsdpfsfi Nmwsx Aiieab Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine Lasdpsvy Tdwofx Aiisb -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Motors: 2 x Perske DKNS 502/2 -Power: 0.15 kW -Frequency: 200 Hz -Speed: 10400 rpm -Number: 1x milling unit available -Dimensions: 470/410/H600 mm -Weight: 60 kg

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motor -Milling units: pivoting -Engine: Perske DKNS 502/2 -Power: 0.15 kW Lsdpfevyz D Sjx Aiisab -Frequency: 200 Hz -Speed: 10400 rpm -Dimensions: 480/360/H595 mm -Weight: 60 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Hemag, saw unit can be swiveled by 30 ° -Saw blade: max. Ø 350 x 30 mm -Motor: Perske type DKNS 120/2 3.0 kW / 2830 rpm -Protection class: IP 54 -Dimensions: 950/780 / H630 mm -Weight: 115 kg Ledjgy Dbwopfx Aiijab

Year of construction: 1994, condition: used, Edger line / automatic edger / double edger with measurement and automatic saw blade adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum pass-through width: 1000 mm Ljdpfx Asyam Iaoiieab Maximum cutting height: 120 mm 3 blades in total 2 blades adjustable Measurement system: Combimes with S-conveyor with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator Can be fully refurbished upon customer request. The plant has already been dismantled and is immediately available. Location: Austria, near Leoben

Condition: good (used), Year of construction: 2008, Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from Ingersoll Rand – model TS3A, built in 2008. Technical specifications: Max. air pressure: 12 bar (175 psig) Max. air inlet temperature: 60°C (140°F) Cooling system: Air-cooled Operating voltage: 400V / 3Ph / 50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant oil type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Lsdpfxjxl D Ads Aiioab Find more items – new and used – in our shop! International shipping costs upon request!

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design Laodpfsgcw Risx Aiisb smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: used, mileage: 390,000 km, first registration: 06/2006, Year of construction: 2006, DB AXOR 1823 L A3 Tanker Truck for Diesel and Heating Oil, 2 Compartments, 14,000 Liters !! Very good overall condition !! Chassis Specifications: • EURO 3 • 230 HP • Displacement: 6,374 cm³ • 8-speed manual transmission • Differential lock • Leaf/air suspension • Radio – CD player • Multifunction steering wheel • On-board computer • Signal horn • Driver airbag • Roof hatch • 1 x fuel tank, 250 liters • Wheelbase: 3,900 mm • Unladen weight: 7,600 kg • Payload: 10,400 kg • GVW: 18,000 kg • Tyres: 315 / 70 R 22.5 • Tread depth: 14/14 13/13/14/14 mm TANK BODY: ESTERER • Year of manufacture: 2006 • For diesel and heating oil • 2 compartments • 7,000 liters each = 14,000 liters total • FMC measuring system by Senning, type GMVT 805-J • TKZ system (temperature compensated meter) • Printer • 2 x hydraulic hose reels with remote control • ADR certificate renewed! • Tank inspection valid! - German vehicle! Laedpfxex Nc Ene Aiiob - 1st owner! - Main inspection (HU/TÜV): 04/2026 - Safety inspection (SP): 10/2025 Errors and prior sale excepted! = Further Information = Please contact Joannis Arpantzanis or Kai Bühler for further information.