Used Fervi Sandblaster for sale (337)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W Ndodex A Nntjpfx Aa Rja 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 700 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 700 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 700 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Ndsdpfx Aaorh E Ere Rsa Technical Specifications Parameter Specification Motor power 5.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 690 l/min Output at 6 bar 650 l/min Output at 8 bar 650 l/min Output at 10 bar 630 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 370 kg

Condition: new, Year of construction: 2026, THEOR 20 INVERTER Screw Compressor with Refrigerated Air Dryer The set includes the THEOR 20 INVERTER screw compressor and the N20S refrigerated air dryer. The CORMAK THEOR series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK THEOR 20 COMPACT screw compressor with refrigerated air dryer and VSD inverter is an excellent choice. With a 15 kW motor and an impressive actual output of up to 2,100 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air, protecting the compressed air system against corrosion and damage. It is also equipped with a VSD inverter, which automatically adjusts the compressor's speed according to demand, helping to reduce electricity consumption. The THEOR 20 COMPACT oil-injected screw compressor with refrigerated air dryer and VSD inverter features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 2,100 l/min ✅ Motor power: 15 kW Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Nedpfemqlqdjx Aa Rjda Output at 0–6 bar 2,100 l/min Output at 6 bar 2,000 l/min Output at 8 bar 1,700 l/min Output at 10 bar 1,600 l/min Outlet connection diameter (G) G1" Dimensions 1550 × 740 × 1180 mm Weight 500 kg

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Njdpfszlpv Aox Aa Roda Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Ndedpfx Aaey Urtfo Rea Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, CORMAK cleaning lasers effectively remove rust, paint coatings, operational deposits, oxides, oil residues, resins, and other difficult contaminants. Thanks to adjustable pulse energy, frequency, and pulse duration, the cleaning process can be precisely adapted both for selective cleaning of molds, dies, tools, and precision components, as well as for efficient preparation of larger surfaces for further processes such as welding, painting, or bonding. The non-contact nature of the process minimizes the risk of mechanical damage, microcracks, or deformation of the substrate. The use of JPT MOPA laser sources provides a wide range of frequency and pulse width adjustments, allowing optimal adaptation of energy density to the type of contamination and the base material. The long fiber optic cable increases operating freedom at greater distances from the main unit, which is especially appreciated by users working with large structures, production lines, or components installed directly on site (steel structures, molds, facades, machine components). All models operate at a 1064 nm wavelength, ensuring high efficiency on typical industrial materials such as structural steels, stainless steels, aluminum alloys, and many other technical substrates. The CORMAK CL series devices are air-cooled and do not require process gases or abrasive materials, which simplifies installation, reduces operating costs, and makes the cleaning process more environmentally friendly. High scanning speeds and adjustable beam parameters significantly reduce processing time compared with traditional methods such as sandblasting, shot blasting, or chemical cleaning, while ensuring a repeatable result and a high-quality surface finish after cleaning. The CORMAK CL300 series is a complete solution for manufacturing companies, tool rooms, maintenance departments, industrial cleaning service providers, and specialists involved in the renovation of structures, molds, and components requiring high surface quality. Thanks to a wide range of parameter adjustments, stable JPT laser sources, and a mobile design, these lasers can be used both as stationary cleaning stations and as service tools operated directly at the customer’s site. Technical specifications – CL300 Parameter Value Model CL300 Dimensions (W × H × D) 260 × 460 × 490 mm Weight 31 kg Laser source brand JPT Fiber interface QCS Operating mode MOPA Laser wavelength 1064 nm Ndedpfxjy Sgn So Aa Rja Maximum pulse energy 5 mJ Fiber optic cable length 5 m Laser pulse frequency 1–3000 kHz Pulse duration 13–500 ns Laser spot size 7 ± 1 mm Laser line length 0.01–150 mm Laser line width 0.01–150 mm Process gas Not required Scanning field (lens) 150 × 150 mm, F254 Cooling system Air cooling Scanning speed 0–30000 mm/s Operating temperature 10–30°C Operating humidity under 70% (non-condensing) Operating voltage AC 230 V, 50/60 Hz

Condition: new, functionality: fully functional, Year of construction: 2026, The dust collector for cabin sandblasters is a complete unit equipped with an engine and a filter. Ensures effective removal of dust and dust from the sandblaster, improving visibility and eliminating escaping dust. Perfect for cabins with a large usable area, it ensures hygienic and safe working conditions. Device description The dust absorber intended for cabin sandblasters is a complete solution equipped with an engine and a filter, ensuring effective dust removal. It is ideal for use in various types of large-area booths where sandblasting is carried out. Thanks to its advanced design, the absorber effectively removes dust from the sandblaster, which improves visibility during operation. Dust that previously escaped from the device is now effectively removed, ensuring more hygienic and safe working conditions. The engine integrated with the absorber ensures high dust extraction efficiency. Thanks to this, users can enjoy the effective operation of the absorber, and sand and dust from the sandblaster are effectively collected and retained in the filter. Noderh E Azopfx Aa Reda The filter is a key element of the absorber that is responsible for retaining dust. Effectively retains dust particles and prevents them from returning to the cabin air. Thanks to this, employees are protected against inhaling harmful substances and have better air quality around them. The dust absorber intended for cabin sandblasters is not only an effective tool for maintaining cleanliness, but also ensures safe working conditions and improves the efficiency and precision of sandblasting. Technical data Extraction power 1100W Performance 3m³/min Power 230V/50Hz Noise level 85dB Inlet diameter 52 mm Handle length 280 mm Guard dimensions (height x diameter) 730 x 260 mm Filter dimensions (height x diameter) 310 x 170 mm Weight 9.5 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, Sandblasting cabinet for clean blasting operations without contaminating the working environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to all-round seals on the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With compressed air connection on the outside. 2 large side doors for loading and unloading from both sides, even for longer workpieces. Integrated extraction system with replaceable air filter. Airflow is controlled via a foot pedal. 2 blasting guns: one fixed and one freely movable blasting gun. 3 separate switches for on/off, extraction, and cabinet lighting. 2 fluorescent tubes (230 volts), in a separate housing with a protective screen and replaceable protective film, including 5 replacement films. Working pressure is regulated via a pressure regulator with a pressure gauge. Scope of delivery: High-quality blasting gun with ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Working cabinet volume: 310 l Air consumption: 200 - 350 l/min Working pressure: 2.8 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight Ndjdjcqm Rrspfx Aa Rja Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: used, Year of construction: 2002, functionality: fully functional, type of input current: three-phase, overall weight: 1,700 kg, filter area: 286 m², suction capacity: 10,000 m³/h, Dust extractor, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation by renowned brand Donaldson Torit. Ndodpsy D Sclofx Aa Rea Suitable for plasma, laser, sandblasting, soda blasting, welding and all types of dry dusts. The fan is installed after the filter on the clean air side, which minimizes explosion risks. Ultra Web filter cartridges are cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. Model – DF+12 SPKTRP Fan power: 11 kW Capacity up to 10,000 m3/h Connection diameter: 315 mm 12 filter cartridges Filter area: 286.8 m2 Year of manufacture: 2002 Equipped with "SparkTrap" spark arrestor system Stock number: 1121

Condition: like new (used), “2 Pcs. Weserhütte EB 1.000 x 700 / 650mm” for Sale Manufacturer: Weserhütte Type: EB 1.000 x 700 / 650 Inlet size: 1.000 x 700 / 650mm Electrical Motor: Included See PDF-file below for more detailed information. Crusher is in good working condition. Nsdpjg I R R Aofx Aa Reda Crusher can be sandblasted and painted.

Condition: good (used), “Neyrtec / Neyrpic 820 x 640mm” for Sale Nsdpfx Aehu Hpisa Rjda Manufacturer: Neyrtec / Neyrpic Inlet size: 820 x 640mm Electrical Motor: Included Crusher will be sandblasted and painted.

Condition: like new (used), Manufacturer: Krupp Type: 6 Inlet size: 1.000 x 630 mm Ndodpfx Aaeg Sxrve Rja Electrical Motor: Included See PDF-file below for more detailed information. Crusher is sandblasted and painted.

Condition: good (used), Power: 7,8 kW. Amperage: 52 A. Voltage: 150 V. 100% ED Magnet L x W: 1.780 x 1.380 mm. Nodpfx Aajg Stwmj Rjda Conveyor belt: 1.400 mm. AA. : Ca. 2.800 mm. With transformer rectifier of 380V. primary. Overband separator will be overhauled, sandblasted, painted.

Condition: like new (used), “Pallmann PS 4-7,5 F – Granulator / Roll Crusher” for Sale Find our complete stock on our website. Manufacturer: Pallmann Type: PS 4 – 7,5 F Mach. No.: 2264036 Electrical Motor: 75 kW Included Ndodpfx Asglvv Usa Rja Included frame. Shredder will be overhauled, sandblasted and painted.

Condition: like new (used), Manufacturer: Löhnert / Berger Type: SKM 20 Electrical Motor: Included See PDF-file below for more detailed information. Will be sandblasted and painted. Nedpfx Aaeg Snrxj Roda

Year of construction: 2012, condition: like new (used), “LuT LTP 1000/700 SK” for Sale Find our complete stock on our website Manufacturer: LuT Type: LTP 1000/700 SK Year of Manufacture: 2012 Rotor Dia. x W.: 1.000 x 700mm Included: – 55 kW Electrical Motor – Inlet – Hydraulic pump with control panel Nsdpfjglvxwsx Aa Rjda – 500 kg Service Crane Spare-parts in stock! Crusher can be sandblasted and painted.

Condition: good (used), Manufacturer: Aubema Nsdpfx Aaehu Hpbs Rsda Type: 2508 Rotor Dia.: 800mm Rotor Width: 800mm Electrical Motor: Included Will be overhauled, sandblasted and painted.

Condition: good (used), Manufacturer: Takraf / Zemag Roll Dia.: 1.250mm Roll Width: 2.000mm Electrical Motor: Included Ndsdpfjg Sntyjx Aa Rja Will be overhauled, sandblasted and painted. See PDF-file below for more detailed information.

Condition: used, Manufacturer: Schauenburg Type: 1440 / 2 Mach. No.: 0914 Year of Manufacture: 1983 Nodpfx Ash Nnh Aja Rsda Decks: 2 Included: – 15 kW/6 Electrical Motor – Cardan shaft – Springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: good (used), Manufacturer: Främbs & Freudenberg Type: 2000-6000-2 Deck size 2.000 x 6.000 mm Number of decks: 2 Included: Nsdpfxsg Snvbj Aa Rsda – Electrical Motor – Cardan Shaft – Springs Vibrating screen can be overhauled, sandblasted and painted.

Year of construction: 2005, condition: like new (used), “ThyssenKrupp Turbo 2,2×4,0(5,2)DD“ for Sale Find our complete stock on our website. Manufacturer: Thyssen/Krupp Type: 2,2 x 4,0 (5,2) DD Size: 2.200 x 5.200 (4.000) mm Nedpfx Ajglvw Soa Reda Mach. No.: 2-485-20540 Year of Manufacture: 2005 Decks: 2 Included: – 15kW/4 (950 RPM) Electrical Motor – Springs Vibrating screen can be sandblasted and painted.

Condition: like new (used), Manufacturer: Kleemann Type: VU1S 1240ST Size: 1.200 x 4.000mm Mach. No.: 38016201 Year of Manufacture: 1998 Deck: 1 (Ca. 80mm Deck opening) Included: – Electrical Motor – Springs Nodpfx Aasg Sty Es Reda Vibrating screen can be sandblasted and painted.

Condition: like new (used), Manufacturer: Ammann / Främbs & Freudenberg Size: 1.400 x 3.000 Included: Nsdpfxeg Snute Aa Rsda – Electrical Motor – Cardan shaft – Springs Elements. Vibrating screen is overhauled, sandblasted and painted.

Condition: good (used), Manufacturer: Stuckstette Size: 1.500 x 4.500mm Decks: 4 Frame: Not included Included: Ndodog Snudspfx Aa Rja – Electrical Motor – Springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: like new (used), Manufacturer: BOA Type: KS 1,5 x 2,5 x 1 Size: 1.500 mm x 2.500 mm Njdjg Stwbopfx Aa Roda Electrical Motor: 11 kW/6 Mach. No.: OR 327 Year of manufacture: 1990 Springs included. Can be sandblasted and painted.