Used Hainbuch Ms Dock for sale (2,725)

Condition: used, Year of construction: 2005, In the configuration 1.2-2.1 axes are X-fix Z-NC and all other axes are NC controlled Double NCU Lasdpfxold Npyj Acfsf It has Büschel, Çiller and Knoll units. High pressures 40 Bar SIR25 IEMCA driver available It is in working condition, our workbench can be seen in our Bursa Gemlik factory.

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump Lsdpfx Aswhy T Tscfsaf - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM Laodpfx Ajp T Ulzocfof SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: good (used), Cutting range, 90° circular: 240 mm Approximate square cutting capacity: 260 x 180 mm Saw blade: Cutting speeds: Fixed jaw: 310 x 110 mm Movable jaw: 190 x 110 mm Opening: 270 mm Features: mobile Condition: good Connection: 1.1 kW Ledoimqt Aepfx Acfeaf Weight: 230 kg Dimensions: 1,400 x 800 x 1,300 mm

Condition: used, ELGA PURELAB Option Storage reservoir docking vessel Elga DV 35 The ELGA PURELAB DV 35 Storage Reservoir Docking Vessel is designed for the secure storage and controlled distribution of purified laboratory water. Engineered to integrate seamlessly with ELGA PURELAB water purification systems, it ensures consistent water quality while maintaining system efficiency and reliability. With a 35-litre capacity, the DV 35 provides dependable storage for laboratories requiring a steady supply of purified water for analytical, research, and general laboratory applications. Its robust construction helps protect water integrity, while the docking design allows straightforward installation and maintenance. Ideal for research facilities, quality control labs, and industrial environments, the PURELAB DV 35 enhances workflow by ensuring purified water is readily available when and where it’s needed Ljdexzh Ehjpfx Acfsaf Recirculation of purified water through our wrap-around reservoir – to maintain consistent peak water purity Optional ELGA Biofilter - when fitted to the Option-Q produces water which is free from biologically active impurities. This makes it suitable for use with applications which require endotoxin free ultrapure water, bacteria-free water, and nuclease-free ultrapure water Type III / RO water available from the reservoir Front-entry service doors for easy and quick access to consumables Data collection capabilities through RS232 interface – for compliance with GLP guidelines Perfect single system solution for analytical and life science applications Delivers up to 15 liters an hour of type I water Up to 18.2 M?-cm, type I water suitable for critical applications Easy to maintain Produces type I water directly from tap water

Condition: used, This listing is for 1 of 2 IKA MS 3 Basic Orbital Shaker. The unit is in full working condition and is ready for immediate release. The IKA MS 3 Basic Orbital Shaker is an efficient and versatile laboratory device designed for a variety of shaking tasks involving small vessels and microtiter plates. Its compact design and robust features make it suitable for both routine laboratory applications and more specialized experiments. Key Features: Orbital Movement: The shaker operates with an orbital motion, characterized by a shaker diameter of 4.5 mm. This design allows for effective mixing of samples within a range of vessel types. Two Operating Modes: Lasdpfx Acjxxz R Eofjf Mode A (Safe Mode): In this mode, the shaker detects the type of attachment being used and restricts the speed to a maximum of 1,300 rpm for non-standard attachments, ensuring safety and preventing damage to both samples and the device. Mode B: This mode does not feature attachment detection and allows for higher speeds up to 3,000 rpm, depending on the attachment and application requirements. Touch Operation: The standard attachment enables up to 3,000 rpm in touch mode, providing immediate mixing responses when needed. Stable Shaking: The shaker maintains stable operation across all speed settings, ensuring uniform mixing of solutions and samples without fluctuations that could impact experimental results. Durable Construction: Built with a robust zinc die-cast casing, the MS 3 B promises longevity and reliability in various laboratory environments. Permissible Shaking Weight: The machine can accommodate a maximum shaking weight (including attachments) of 0.5 kg, making it versatile for different laboratory setups. Key Specifications: Type of Movement: Orbital Shaker Diameter: 4.5 mm Permissible Shaking Weight (including attachments): 0.5 kg Operating Modes: Mode A: Safe mode with attachment detection Mode B: Without attachment detection Speed Range: 0 - 3,000 rpm (Limited to 1,300 rpm in Mode A with non-standard attachments)

Condition: like new (used), functionality: fully functional, machine/vehicle number: 28727, Diameter max: 6 mm Laodpfxothgkqs Acfef Length under head max: 30 mm Speed: 400 ppm

Condition: used, This listing is for a Applied Biosystems API 2000 MDS SCIEX LC/MS/MS This system was previosly paired with the Shimadzu SIL-HIT HPLC system. It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Equipment can be serviced/renovated/refurbished on request at extra cost. Ledpfxjxzhpme Acfsaf

Condition: used, functionality: fully functional, fuel type: diesel, operation weight: 29,000 kg, emission class: euro3, Year of construction: 2016, operating hours: 5,660 h, Screen type: Triple-deck classification screen Ledpfx Ajyznb Eecfoaf Dimensions upper deck: 1,520 x 4,270 mm (W x L) Dimensions middle deck: 1,520 x 4,270 mm (W x L) Dimensions lower deck: 1,520 x 3,660 mm (W x L) Feeding capacity up to approx.: 350 t/h Feed size: 150 mm Engine: Cat Power: 75 kW Transport dimensions: 15,610 x 3,100 x 3,450 mm (L x W x H) Weight: 29,000 kg Hopper volume: 8 m³ Drive: Dual Power diesel and electric drive Operating hours electric drive: 10 h

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! Lajdpfxsyx Tzrs Acfsf EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2035601, total length: 1,350 mm, total width: 730 mm, total height: 700 mm, fuel type: electric, Used Mycom F200VMDD-MS screw compressor on Freon. Lodperlk Aqsfx Acfsaf

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction Lodpfx Acoyuzcujfoaf - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: excellent (used), 1.6 kW motor, 2,300 m³/h, 16 cm inlet Laodpfsy Aagcox Acfjf

Condition: used, Year of construction: 2004, Manufacturer: Rotex Europe Model: 3242A AL/MS Year: 2004 Type: Rectangular rotary screen Grid: 5 mm and 30 mm Overall dimensions: 2700 mm x 900 mm x 900 mm. Unclogging ball Laodpfxox R Au Ss Acfsf Unit composed of: Feed hopper Dimension : Ø 1300 mm x 700 mm Vibrating conveyor Manufacturer : Scan-Vibro Year : 2005 Output diameter : Ø 200 mm Transporting screw Manufacturer : Fjordvess Maskinfabrik A/S Type : B-200 Year : 2005 Screw diameter : 200 mm Total dimension : 1500 mm x 650 mm x 400 mm,

Condition: new, roller (top) diameter: 46 mm, roller diameter: 46 mm, input voltage: 400 V, empty load weight: 225 kg, - Capacity 1050 x 0.8 mm - Roll diameter 46 mm - Conical roller Laedpsr Iza Rjfx Acfef - Swivel top roller - Foot control - Emergency stop - Documentation - 400V

Condition: new, roller (top) diameter: 56 mm, roller diameter: 56 mm, sheet thickness steel (max.): 1 mm, - Capacity 1050 x 1 mm - Roll diameter 56 mm - Conical roller - Swiveling top roller Lajdpsr Ixrkofx Acfsf - Foot control - Emergency stop - Documentation - 400V

Condition: used, air flow quantity . m³/h suction power . kPa power capacity . kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Laedpoyqvp Usfx Acfef We look forward to your visit. Your Markus Hirsch Team

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : Laodpfxexabtij Acfef - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces Lodpfx Aexaarqjcfjaf - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm Laodpfx Asxabf Escfjf total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg Laodpexabkzofx Acfsf range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW Lodpfxjxablle Acfoaf table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Holp VarioBucket / VL.112.421 / incl. rotary drive / RotoTop 121 / MS08 / HARDOX / NEW / in stock & immediately available Price: €12,565.00 net / €14,952.35 gross - Excavator size: 7 t – 14 t - Own weight approx.: 460 kg - SAE capacity: 400 liters - Slope angle: 54 ° - Ditch bottom radius: 150 mm - Includes Holp RotoTop 121 rotary drive - The bucket is made entirely of HARDOX. Advantages of the Holp VarioBucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular structure - Rounded bottom - Two working openings - Rectangular working opening - V-shaped - The VarioBucket stands out for its high performance and clean operation. Its V-shaped opening allows precise discharge, and it delivers excellent ditch clearing performance when pulled. Wherever greater speed and flexibility are required for varied tasks, the VarioBucket is a real asset on site: it is faster, more adaptable, and safer. We have a large number of other Holp products in stock and immediately available! Mr. Herden (Tel. ...) will gladly assist you. We will also be happy to provide you with a financing offer upon request. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Holp range! Errors and prior sale excepted! = Further information = New: Yes Laedjyhymcspfx Acfof Application: Construction Unladen weight: 460 kg Please contact Marius Herden for more information.

Condition: used, Year of construction: 2004, 2 blades Automatic ascent Pneumatic pressers Adjustment stops 380V Laodpsxzpwlefx Acfef

Condition: new, 1 set of table shear blades for a motor-driven table shear Manufacturer: LAMI NOVA Model: MS 3003 Cutting length: 3050 mm Cutting thickness: 3 mm Delivery time: immediate, subject to prior sale Options: Lodpfx Asddzg Nocfoaf Additional spare parts or service available upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel