Used Heller Switchgear And Switchboard for sale (6,886)

Condition: new, power: 66 kW (89.73 HP), maximum speed: 40 km/h, maximum load weight: 6,500 kg, ENGINE: - Rated power at 2,300 rpm: 66 kW / 90 hp - Maximum torque at 1,300 rpm: 380 Nm - Torque rise: 39% - Power data (ISO TR 14396 - ECE R120) - New Holland / FPT 4-cylinder turbo diesel engine, 3,600 cm³ displacement, 4 valves per cylinder, water-cooled, - Charge air cooling - Electronic common rail high-pressure injection pump - Compact HI-eSCR2 exhaust aftertreatment system with AdBlue injection, Stage 5 emissions compliant - Viscous fan, thermostatic starter system, engine immobilizer, PowerCore dry air filter - Engine speed management (ESM) optional - 2 engine speed memories - 120A alternator, 143 Ah battery, electronic battery disconnect switch - Oil and filter change interval: 600 hours - Diesel tank capacity: 130 l; AdBlue tank capacity: 9.6 l TRANSMISSION: - 12/12 powershuttle, optional: 20/20 powershuttle with creeper gears - 40 km/h, mechanically-hydraulically load-sensing reversing gearbox, lever on the left of the steering column POWER TAKE-OFF (PTO): - 540 / 540E (at 1938 / 1535 rpm of the engine) or 540 / 1000 (at 1938 / 1926 rpm of the engine), each with - Live PTO - Optional: 540 / 540E / 1000 with / without live PTO Knedjz Na Dvopfx Ahijc - Electrohydraulic PTO clutch - Speed preselection in the cab, PTO safety switch BRAKES & DIFFERENTIAL LOCK: - Wet disc brakes, hydraulically actuated - Automatic engagement of all-wheel drive when braking - Front & rear: electrohydraulic differential lock FRONT AXLE & STEERING: - 1.0 HD axle with equal wheel steering cylinder, 55° steering angle, turning radius 4,235 mm (depending on track width & tires) - Load-sensing all-wheel drive coupling - Separate steering pump with 37 l/min - Front mudguards pivot with the steering HYDRAULICS & CONTROL VALVES: - Open hydraulic system, pump output 64 l/min, optional 82 l/min, 190 bar - 2x rear control valves, optional: 3x rear control valves - Push & pull couplings, switchable single/double-acting - Rear 3-point linkage: Category 2/2 quick coupler, telescopic lower link stabilizers - 3,000 kg lifting capacity at the linkage points - optional: 4,400 kg lifting capacity at the linkage points with 2x external lifting cylinders - Mechanical upper link control, Lift-O-Matic lift height limitation DRIVER'S CAB & CONTROLS: - Large 4-post cab with air conditioning 77 db(A) - TopView panoramic roof window, upholstered co-driver's seat, windshield wiper & washer system front & rear, heater & ventilation with - Recirculation system, tilt-adjustable steering wheel - Radio, cigarette lighter, 8 A & 25 A socket, 2x USB charging ports, cable entry, air suspension seat Grammer - optional, telescopic mirrors with wide-angle optional - Instrument panel display: Engine speed, fuel level, coolant temperature, driving speed, - PTO speed, operating hours - 6 work lights halogen (2x in the hood, 2x each front & rear on the cab roof) - optional: 4 work lights halogen (2x in the hood, 2x rear on the cab roof) & 2x switchable, - overhead driving lights front on the cab roof - optional: rotating beacon OTHER EQUIPMENT: - EU 167/2013 type approval for agricultural vehicles - Electronic battery disconnect switch - Height-adjustable trailer hitch - Operating manual - optional 2x mid-mount control valves with cross-gate lever - optional front linkage with / without front PTO - optional front loader preparation (Stoll) complete from factory - optional air brake system DIMENSIONS & WEIGHTS - Length: 4,396 mm, Width: 2,170 / 1,910 mm (with / without rear fender extensions) - Height: 2.

Condition: used, Year of construction: 2023, operating hours: 250 h, power: 400 kW (543.85 HP), maximum speed: 30 km/h, front tire size: TW IF 710/70 R42, rear tire size: SW VF 520/80 R26, Equipment: air conditioning, cabin, onboard computer, Engine: - FPT Cursor 13 engine - Tier V emission stage - Hi-eSCR2 technology - 12900 cm³ displacement - 6 cylinders - Turbocharger - Intercooler - Common rail injection - Rated power: 365 kW at 2100 rpm - Max. power: 400 kW at 2000 rpm - Self-cleaning and pivoting radiator rotary screen - Fuel tank 1300 l - AdBlue tank 130 l - Rotary screen brush Drive and axles: - Hydrostatic drive - 2-speed gearbox with electronic gear preselection - Overload protection - Parking brake - Wet multi-disc brakes – electro-hydraulic differential lock - Adjustable rear axle - 30 km/h at reduced engine speed Feeder: - Automatic feed pressure control and cutting height adjustment of the cutter bar - Inclination and angle adjustment of the cutter bar - AutoFloat system - Hydraulic quick coupler for cutter bar - Hydraulic reel drive - Hydraulic engagement of cutter bar/reel and feeder - Dynamic feed roll (450 mm diameter, 1100 rpm, reducible to 640 rpm, 8 bars) Cutter bar: - 760 CG, 10.70 m Varifeed: Bolted short crop dividers - Scraper strips on the feeder - Lower scraper strips - Reel - Reel speed sensor - Header lifters - Left and right rape seed separation knives - Kit for rape seed separation knives - Rear wall extension - Knife position sensor - Replacement knives - Knife guard - Knife bar 3" fine - Knife drive - 57.5 cm adjustment range - Spare wheel - Guide wheels Threshing and separation: Knjdpfx Ahsz Na H Deiec - 2 longitudinal rotors - Counter-rotating for threshing and separation - 2.64 m rotor length; 0.559 m diameter - Engine speed with 2 speed ranges: 331 - 697 or 668-1407 rpm - Electrically adjustable from the cab - 1 threshing basket per rotor with 18 basket bars - 123° wrapping angle - Electrically adjustable - 2 separating baskets per rotor - 1 finger basket - 148° wrapping angle - Discharge drum: 4 bars - 1.57 m wide, 0.40 m diameter - Speed 800 rpm - Separating basket - wrapping angle 54° - Total threshing and separation area 3.06 m² - Adjustable guide plates in the rotor covers for controlled material flow - Twin Pitch PLUS rotors Cleaning: - OptiClean cleaning system - Increased cascade stages - Counter-rotating pre-cleaning floor and upper sieve - Electrically adjustable vane sieves - Total sieve area 6.50 m² - 2 separate re-threshers - Electronic monitoring - Automatic slope compensation up to 17% of the pre-cleaning floor - Cleaning fan and sieve box - Cleaning fan with two fan outlets - Speed adjustable from 200 to 1100 rpm - Access to the pre-cleaning floor through large service openings on both sides of the machine Grain elevator & grain tank: - 12,500 l grain tank volume - 126 l/s unloading rate - 6.4 m unloading spout - Grain tank with 2 level indicators - Grain tank lighting - Grain sample extraction - Adjustable work lights on the unloading spout Straw and chaff distribution: - 6-row straw chopper and hydraulically driven chaff spreader - Tool-free change from straw laying to chopping operation - DualChop chopping bar - Active straw distribution OptiSpread plus - Adjustable working width - Distribution and throw direction (in case of side wind) Driver's seat: - Adjustable comfort seat with air suspension - Partial leather seat with additional comfort features - Passenger seat - 3-way adjustable steering column, automatic climate control - Refrigerator with adjustable temperature - Multifunction lever: Direction of travel and travel speed - Raise/lower cutter bar - Inclination adjustment - Reel

Condition: new, Year of construction: 2026, working width: 6,550 mm, - Rotor diameter: 2.95 m - Number of swaths: 1 - Drive chassis - Lower link attachment with cardan shaft - Working width: 6.15 - 6.55 m - Number of rotor arms per rotor / number of tines per rotor arm: 10/4 - Minimum power requirement at the PTO: 30 kW / 40 hp - PTO speed: 540 rpm - Required additional control units: 1 single-acting - Weight: 857 kg - The ProRotor™ C twin-rotor tedders ensure a centered deposition of the crop. - The hydraulic rotor arm lifting system allows the tedder to be hydraulically folded into the transport position. Kedjz Na Rcjpfx Ahisnc - The transport height is less than four meters.

Condition: used, Year of construction: 2014, working width: 9,300 mm, - 9.30 m working width - 6-wheel circular chassis - Pre-selection control - Warning signs and lighting - 40 km/h Kedpfx Asz Na Rishionc

Condition: new, Year of construction: 2024, power: 55 kW (74.78 HP), maximum speed: 40 km/h, maximum load weight: 4,800 kg, - Rated power at 2300 rpm: 55 kW / 75 hp - Maximum torque at 1500 rpm: 309 Nm - Torque rise: 36% - Performance data according to (ISO TR 14396 - ECE R120) - New Holland 4-cylinder turbo diesel engine, 3.4 l displacement, water-cooled - Electronic Common Rail high-pressure injection - Cooled external EGR, DOC (Diesel Oxidation Catalyst) & DPF (Diesel Particulate Filter), Stage 5 emission compliant - Viscous fan, thermostat starting system, starter interlock, dry air filter with safety cartridge Knedpfez Na Smex Ahijc - Oil and filter change interval: 600 hours - Exhaust on the right A-pillar of the cab - Fuel tank capacity 90 l TRANSMISSION: Optional: - 12/12 Shuttle Command 40 km/h, synchronized reversing, lever on the left of the steering column - 12/12 Powershuttle 40 km/h, load-shifting reversing, lever on the left of the steering column - 20/20 creep speed gearbox for Shuttle Command and Power Shuttle from 118 m/h at 2300 rpm and 420/70R30 tires POWER TAKE-OFF (PTO): - 540/540E (at 1958/1592 rpm of the engine) - Servo-hydraulic engagement - Wet disc clutch on Power Shuttle models - PTO speed preselection in the cab, live PTO optional BRAKES AND DIFFERENTIAL LOCKS: - Wet disc brakes, hydraulically actuated - Automatic engagement of all-wheel drive when braking - Mechanical differential lock in the rear - Limited Slip self-locking differential in the front FRONT AXLE AND STEERING: Optional: - All-wheel drive axle with equal-angle steering cylinder, 55° steering angle - Load-shifting all-wheel drive engagement - Separate steering pump with 27.5 l/min or 36 l/min (PS) flow rate HYDRAULICS AND CONTROL VALVES: - Open hydraulic system, pump output 47.5 l/min, 190 bar, oil cooler (only on Powershuttle) LIFTING SYSTEM: - Category 1/2, quick coupler - 2715 kg lifting capacity with 1 auxiliary lifting cylinder - Mechanical top link control, rear actuation DRIVER'S CAB AND INSTRUMENTATION: - VisionView cab, 78 dB(A), radio, opening rear and side windows, lightly tinted, windshield washer-wiper system in the front, heating and ventilation with recirculation system, adjustable steering wheel tilt, access opening for implement operation - Instrument panel displays: Engine speed, fuel level, coolant temperature, driving speed, - PTO speed, battery voltage, operating hours - Standard: driver's seat mechanically sprung, 6 halogen work lights, 8A and 25A socket, rearview mirror with wide-angle view - DeLuxe cab includes, in addition to the standard cab: passenger seat upholstered, rear windshield washer-wiper system, 1 mirror in the cab, cigarette lighter, ashtray - Optional with/without: opening front window, Top View skylight, air conditioning, air suspension seat OTHER EQUIPMENT: - EU 167/2013 type approval for agricultural vehicles - Battery main switch - Quick-adjusting height hitch - Operating manual DIMENSIONS AND WEIGHTS: - Length: 3836 mm, width rear fenders: 1922 mm - Height: 2459 mm (with 420/70R30 tires) - Distance from center of rear axle to top edge of roof: 1784 mm - Wheelbase: 2132 mm - Front track (fixed rims): 1562 mm & 1624 mm, - Rear track (tire-dependent): 1327 - 1930 mm - Unladen weight: 2800 kg - Permissible total weight: 4800 kg

Condition: used, Year of construction: 2023, operating hours: 250 h, maximum speed: 40 km/h, power: 480 kW (652.62 HP), 2X16 CORN HEAD ATTACHED COUNTER KNIFE (FI) SPARE PART 412062-GRASS COUNTER KNIFE (Spare part) FEED ROLLS (FI) SPARE PART 439416-Plastic wear strips upper pre-compression rolls (FI) Spare part MOTOR AIR COMPRESSOR 722525-Air compressor for cleaning the machine and prerequisite for a tire pressure control system or with attachment with a stalk shredder corn head (FF factory-mounted) HOSE & AIR BLOW GUN 712656-HOSE AND AIR BLOW GUN FI (in spare part) DRIVER'S SEAT 425188-Air comfort seat DeLuxe; leather seat, integrated headrest, adjustable shock absorption, 80mm Kedpfoz Na Syjx Ahionc seat height adjustment, electronic weight adjustment, seat heating, height of the backrest 1073mm DRIVE WHEELS 8300052-TW800/70R38-181A8-SVT 75 - Continental / Mitas HWC Outer width 3.29m STEERING WHEELS 8100929-SP620/70R30-178A8-IMP (20)(Mitas) Diameter 1.56m -- Outer width 3.27m ROOF-MOUNTED WORK LIGHTS 464193-11 LED roof spotlights & x6 LED work spotlights & x2 corner/stubble spotlights AUTOMATIC LUBRICATION 463006-Central lubrication HD Heavy Duty pre-compression rolls & Standard CP Crop Processor rolls (FF) factory-mounted 422504-Silage additive tank 400 ltr. WITH PUMP AND FLOW METER PRE-COMPRESSION ROLL MODULES 463010-(HD) Heavy Duty pre-compression roll module FEED ROLLS (FF) FACTORY-MOUNTED 463043-Wear strips upper front pre-compression roll (FF) factory-mounted PNEUMATIC HORN 439624-PNEUMATIC HORN FI (Spare part) Additional, very loud horn via air. (Therefore, air compressor required) 2ND DISPLAY 464264-2nd monitor for dual-display function with Intellifill, DGPS mapping, autoguidance, camera view, (FF) factory-mounted ___ CONTROLS OF THE ATTACHMENT: - Cutting length adjustment from the cab - Electro-hydraulically operated raising and lowering of the attachment; Cutting height preselection; Automatic adjustment to ground contours via hyd. Auto-Float system; Automatic attachment relief - Drivetrain with drive shafts and cardan shafts FEEDING: - Hydrostatically driven intake rollers - Max. 210kW drive power (intake and attachment) - 4 pre-compression rollers (opening max. 2270 cm²) - Module with folding intake roller; 4 compression springs - HydroLoc™ hydrostatic drive for intake rollers, attachment and reversing; 2-speed cutting length gearbox - Stepless cutting length adjustment from the IntelliView™ -IV monitor between 3 to 16.5mm cutting length (with 2x16 knife Busatis) - 2 to 13mm cutting length (with 2x20 knife Busatis) - Heavy Duty grass counter knife - Optimal material flow through V-shaped knife arrangement, straightforward material flow from the pre-compression rollers to the discharge - Automatic speed control "Power Cruise II" - Metal detector with sensitivity adjustment, display of foreign objects on the IntelliView™ -IV monitor CHOPPING UNIT: - Knife drum, diameter 710mm, width 860mm, 1132 rpm, weight 600kg (16x2 knives) - (20x2) knife drum 1300 rpm - Grinding of the knife drum automatically in reverse, if desired - Support feet for chopping unit - Frame for three-point hydraulics for easy removal of the chopping unit ADJUST-O-MATIC: - Adjust-O-Matic™ Automatic adjustment of the counter knife - Automatic grinding of the knives from the driver's seat with automatic opening of the grinding stone cover - 1 grinding stone for grass and corn knives - Display of grinding stone wear in the cab - Grinding duration as needed - Self-diagnosis PROCESSOR: - Patented hard chrome crop processor with 250mm and 30% speed difference. - Drive via 6-fold Powerba

Condition: used, Year of construction: 2017, operating hours: 1,123 h, power: 51 kW (69.34 HP), maximum speed: 40 km/h, front tire size: 280/85 R24, rear tire size: 320/85 R36, Equipment: air conditioning, all wheel drive, cabin, front-end loader, - 12/12 transmission with reversing gear - F5C 4-cylinder turbo diesel engine - Power take-off: 540 (at 1958 rpm of the engine) - NH all-wheel drive axle - 2 rear control valves as standard - Hydraulic clutch - Deluxe cab - Mechanically sprung driver's seat - Fabric upholstery - Heating and ventilation - 10 adjustable air outlet nozzles - Opening front windshield - Panoramic roof window - Radio - Passenger seat - Rear windshield wiper and washer system - Tilt-adjustable steering column - Antenna Kodpfsz Na Tkjx Ahisnc - Speakers - Rearview mirror - Quickly adjustable and automatic trailer hitch - Battery master switch - Toolbox - Mechanical lifting mechanism control - Standard fan - Air brake system (1+2 circuit) - 2 double-acting control valves - 2 front hydraulic couplings - Manual transmission - Upper link, front and rear - Front hydraulics - Alö front loader X26 - Vibration damping on front loader

Condition: new, Year of construction: 2022, - Hydraulic non-stop stone protection system (deflection height 540 mm) - XLD (suitable for tires 710 mm wide) - sprung disc coulter and wear plate on the last body only - Wheel OPTIONS - Combi 260/70-16 - mechanical adjustment of working width per plow body 40/45/50 cm - Digging depth: 540 mm - max. tractor power: 220 hp - Coulter width (cutting width) 18 inches (45 cm) - Straw incorporator - Wear plate on the last body only - Rotatable coulter tip Knedpfxoz Nbbis Ahioc - Pivot axle Cat. 3 (36 x 965 mm) - Mounting tower – standard, no locking - Frame pivoting cylinder

Condition: new, Year of construction: 2022, - Stepless, variable adjustment of working width - Hydraulic non-stop stone protection - Pre-tillage coulter type EG 80 - Hydraulic adjustment of front furrow - Lateral combination support wheel 11.5-80 15.3 with HDC - Digging height 540 mm - Max. tractor power 220 hp - Coulter width (cutting width) 18 inches (45 cm) - XL - AX body shape - Hydraulic non-stop (trip height 540 mm) - No straw inlayer - Wear plate for the implement, only on the last body - Rotatable coulter tip - Support axle Cat. 3 (36 x 965 mm) Knodez Nbcgjpfx Ahisc - Mounting tower – standard, no locking mechanism

Condition: new, power: 18 kW (24.47 HP), Equipment: all wheel drive, cabin, front-end loader, ENGINE: 3-cylinder Mitsubishi diesel engine, water-cooled; 18.20 kW; 2700 rpm; 1318 cc displacement; 25 liter fuel tank capacity DRIVE: Hydrostatic drive (HST); number of gears: 2; brakes: multi-disc brakes in an oil bath; hydraulic steering; travel speed (km/h) depending on the tires used: approx. 24 POWER TAKE-OFF (PTO): Type: load-sensing wet multi-disc clutch, electro-hydraulically controlled Mid-mounted PTO (rpm): 2,000 Rear PTO (rpm): 540 HYDRAULICS: Knodjz Nbc Tjpfx Ahioc Total hydraulic output (l/min): 32 Working hydraulics (l/min - kg/cm²): 22 Hydraulic steering (l/min - kg/cm²): 10 Rear three-point linkage: Cat. I Lifting capacity (kg): 670 DIMENSIONS: Overall length (mm): 2,660 Minimum width with tires (mm): 1,140 Wheelbase (mm): 1,500 Turning radius (mm): 2,500 Overall height (mm): 2,370 Overall height with high-roof cab (mm): 2,090 Overall height with flat-roof cab (mm): 1,970 WEIGHT: Unladen weight (kg): 825 ~ 841 TIRES: AS tires: overall width approx. 1,140 mm Industrial tires: overall width approx. 1,180 mm Turf tires: overall width approx. 1,180 mm Municipal tires: overall width approx. 1,140 mm Narrow municipal tires: overall width approx. 1,070 mm Extra-narrow municipal tires: overall width approx. 1,000 mm

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 Knodpfxez E U D Ns Ahioc - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: good (used), functionality: fully functional, Internal article number: 26051 Knodpfx Ahez Ha Icsijc HSK-A63 Turning tools Sandvik CoroTurn TR 3x base holders HSK-A63 C4-390.410-63 080C + Insert Coroturn 107 / 5513 020-01 / 5680 049-01 / C4-SDJCL-27050-11 + Insert Coroturn 107 / 5513 020-01 / 5680 049-01 / C4-SDJCL-27050-11 + Insert CoroTurn TR-C4-D13 NCN-00050 5680 049-01 / 5513 020-01 + Insert C4-SRDCN-00050-08A 5513 020-04 / 5680 051-03 + Insert Sandvik C4-LF 151.23-27060-30 + Insert Sandvik C4-SRDN-00050-08A + Various indexable inserts

Condition: used, Year of construction: 2004, Overview This Robino & Galandrino ZENITH Z 2/16 OTTICO is a rotary capsuling machine for sparkling wine bottles, built in 2004. It places and crimps capsules onto 750 ml glass bottles, with optical spotting so that a printed capsule is aligned to the bottle before crimping. The machine is laid out as a two-turret unit: a capsule distributor turret feeding a 16-head rotary crimping turret, rated at 12,000 bottles per hour. It is still installed and under power, remains in production until end of January 2027, and can be visited in operation on request. Technical data - Manufacturer: Robino & Galandrino - Model: ZENITH Z 2/16 OTTICO - Year of manufacture: 2004 - Machine type: rotary capsuling machine for sparkling wine bottles - Configuration: 2 turrets, 16 crimping heads - Capsule spotting: optical - Capacity: 12,000 bottles per hour - Container: glass, 750 ml sparkling wine bottles - CE marked Kodoz Dtndjpfx Ahijnc Equipment - Automatic capsule magazine with inclined slat elevator feed - Optical spotting station for pre-printed capsules - Full safety enclosure with transparent doors and emergency stops - Bottle infeed and discharge handling with star wheels and guide rails Condition Used - still installed and under power, in production at the current site. Availability From end of January 2027. Location: France. Sold EXW; dismantling, handling and truck loading are not included.

Condition: used, Year of construction: 2006, empty load weight: 12,000 kg, For sale: 3 scissor lifts Working height: 22m Price is per unit when purchasing all three Kodpfx Asz Dukyjhisnc Trade-in and transport options available For more information, please call or send a message.

Condition: used, Year of construction: 2001, Foundry Manipulator CLANSMAN DYNAMICS Knsdpjz H Izwsfx Ahisc Year of construction: 2001 Max capacity: 250 KG

Condition: ready for operation (used), D'Andrea T100 Planing and Turning Head for Fehlmann SF32 Head diameter: 102mm Radial adjustment of the tool slide: 30mm Max. planing diameter: 200mm Kodpfsz H Iz Dsx Ahisnc Max. speed: 1500 rpm Accuracy: 0.005 mm Net weight: 4.6 kg Tool holder: SF 32 Fehlmann You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2019, Overview Set of three cylindro-conical fermentation tanks built by Shandong Tiantai in 2019 - two of 1,000 litres and one of 7 BBL (approx. 820 litres). All three vessels are built in stainless steel SS304, rated for 4-5 bar working pressure and fitted with a cooling jacket with glycol inlet and outlet, a level gauge, an inward-opening side manway and a bottom outlet valve. The tanks stand on welded legs and are still installed at the site in Spain, where they can be viewed by appointment. A compact fermentation block for a craft brewery adding or replacing tank capacity. Technical data - Year of manufacture: 2019 - Units: 3 tanks - 2 x 1,000 L and 1 x 7 BBL (approx. 820 L) - Dimensions (approx.): Ø1210 x H2550 mm (1,000 L tanks), Ø1060 x H2550 mm (7 BBL tank) - Material: stainless steel SS304 - Design: cylindro-conical, isobaric pressure vessels on welded legs - Working pressure: 4-5 bar - Cooling: cooling jacket on every tank, glycol inlet and outlet - Fittings: level gauge, inward-opening side manway, bottom outlet valve Scope of Delivery - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 7 BBL (approx. 820 L) | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 Condition Used, still installed at the current site. Viewing possible by appointment. Kjdpfsz Atq Sex Ahienc Availability Immediately available.

Condition: good (used), Year of construction: 1995, year of last overhaul: 2022, DIAB air supply range overhaul of machine in 2022 complete replacement of compressed air distribution (hoses) including a large number of air pistons Kedpownplfjfx Ahienc replacement of machine oil lubrication repair of feeder head overhaul of main engine reconstruction of feeding sensors slight damage to counterpressures DW 2 1/2, DW3 1/2, DW4 - 5, LM 1/2 non-functional offset blanket washers (dismantled)

Condition: good (used), Year of construction: 2002, For automatic filling This machine is suitable for standard leek racks and 200 cm boxes. Kedpsz Rdpgefx Ahionc This can be easily adapted Automatic box filler Shaker in the digging knifeShaker under the clamping beltsCleaning brushesOwn hydraulic system with PTO pump More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Van Dijke skin (bulbs) separator. Knjdjz Rgc Aopfx Ahijc This machine can be used for flower bulbs and several type of vegetables, like potatoes. Galvanized frameWidth of conveyor 120 cm. Designed to remove floating pieces of a product, like the sheets of the skin of flower bulbs or leafs. The machine works on the principle that the produce is heavier than the pieces that are to be taken out, and are therefore separated from each other. The separation is made by a floating waste outlet. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2018, A Baekelandt celeriac washer is a convenient machine specifically designed to clean celeriac quickly and efficiently. It works in a few simple steps: Input The celeriac is placed in the machine. Cleaning The celeriac is guided through the celeriac washer, where it is cleaned using various rotating brushes and powerful water jets. This ensures that soil and dirt are effectively removed from the celeriac without damaging the skin. The result is clean celeriac that is ready for further processing or packaging. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Knjdpfx Ahsz Rhbaoioc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2021, This machine is equipped with adjustable forks, allowing it to place a double row of leeks into the crates. It can easily position two rows of leeks in 160 cm potato boxes. Of course, the machine is also suitable for standard leek racks. Depending on the requirement, it can place either one or two rows in the box, as shown in the video. The machine is currently set up for 160x120x120 cm boxes, but it can be easily adapted to other sizes. The machine was built in 2021 and has been in use since 2022. It is an automatic box filler with hydraulic torpedoes equipped with leaf-cutting blades, a shaker in the digging knife, and another shaker under the clamping belts. It also features peeling brushes and its own hydraulic system with a PTO pump. Technically, the machine is in good condition. The bearings in the shaker and digging knife have recently been replaced. The clamping belts are still in good shape, although the last filling belts are slightly dried out.Year of manufacture 2021 (in use since 2022) Automatic box filler Hydraulic torpedoes with knives for the leaves Kodoz Rdalopfx Ahijnc Shaker in the digging knife Shaker under the clamping belts Cleaning brushes Own hydraulic system with PTO pump More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 1995, Newland conveyors extendable conveyor in fixed position. Has been used to unload containers. Kodpjz Rb Iasfx Ahijnc Suitable for unloading trucks, trailers, containers and vans, With wired remote control. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Berg bucket water filler for flowers Berg filler is a reliable system that guarantees continuity in your processing cycle. Make it the best solution for easy and fast bucket filling. The water willer does not need much space and is suitable for practically containers and buckets in any size. A stack of buckets is easily pushed onto the plateau that rises up to the right working height. When the machine is without buckets, the empty platform goes automaticly back to ground level. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Knedpfez Rd Rwex Ahijc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: new, Year of construction: 2025, Planting element for Van den Beucken transplanting machine for soil blocks Including farmflex wheels More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Kodpfjz Rb Rbsx Ahisnc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery