Used Hess Multipress for sale (456)

Condition: used, Year of construction: 2000, table width: 2,700 mm, table length: 3,300 mm, total length: 3,800 mm, total width: 1,000 mm, total height: 2,700 mm, overall weight: 2,000 kg, No. 04544 Nwsdpfx Asy E N Izsi Tsn Perforated plate press Hess JULIA Used, year of construction 2000 Dimensions of the perforated plate 3300 x 2700 mm LW 4 manual hydraulic cylinders (2 in need of repair) 12 pneumatic cylinders (2 magnetic and with angle adjustment) Transport dimensions approx. 3800 x 1000 x 2700 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Nwodsw I Ui Uopfx Ai Ten Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: reconditioned (used), Working width 3550 mm Working height 2550 mm Number of cylinders 5 St. Hess Quickstep Frame Press ----- Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) ----- General ----- Working width: 3550 mm Working height: 2550 mm - Siemens S7-1200 control system (replaced in 2024) PLC control for automated pressing cycle, (optional: configurable for specific pressing cycles, such as for counter-dowels or mortise-and-tenon joints) manual control mode also available - Hydraulic power unit and hoses replaced in 2024 Features: ----- > Hydraulic: Yes > Number of vertical pressing cylinders: 3 > Number of horizontal pressing cylinders: 2 > Vertical adjustment method: Electro-hydraulic (long-stroke cylinders) > Horizontal adjustment method: Electro-hydraulic > 1 Intermediate pressure beam > 1 Small-dimension spacer/insert > 3 Pivoting pressure plates Nwedpoz S N Htsfx Ai Ten ----- (Technical specifications provided by the manufacturer – no guarantee!) Images show the same model. Original photos not yet available.

Condition: good (used), For sale: HESS frame press pneumatic, retrofitted with pressure booster control max. press length approx. 355 cm Nwodpfx Ae Af Humoi Tjn in good condition, from a small carpentry workshop.

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Nwsdpfxjxgvwpj Ai Tjn Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, Pneumatic punching press HPA, 8 to 60 kN, available upon request. Direct-acting punching press with a pressing force of 17 kN. Nodpfxezn Nqfj Ai Tjwn Pressing force 17 kN. Working stroke 40 mm. Overhang 100 mm. Table size W 300 x D 200 mm. Ram bore 20 mm. Weight 41 kg. Two-hand control panel. Two-hand operation: both buttons must be pressed simultaneously with both hands. Complies with the requirements of EN 574, Class IIIB 1. • Ram with anti-rotation feature. • Simple height adjustment of the press head via a threaded spindle and bevel gear. • Side-mounted measuring tape for quick reproduction of settings when changing tools. • Virtually maintenance-free, double-acting cylinder.

Condition: used, Year of construction: 1993, used, in excellent condition Brand: Hess Model: Express Year of manufacture: 1993 Machine no.: 100914/28 Njdpfx Asxuv N Uji Town Cylinders per press element: 2 - 110 mm stroke Number of press elements horizontal: 3 Number of press elements vertical: 3 Working width: 2500 mm Working height: 1350 mm Press depth: 600 mm Pneumatic Height adjustment: electric Space requirement approx. 3600 x 800 x 2450 mm Weight approx. 1200 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Njdjwyda Ujpfx Ai Town Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Nedpfev H E Alex Ai Tjwn

Condition: used, Year of construction: 1988, usedmake Hesstype Hydro-Spezialyear of construction 1988cylinder horizontal 2working width 3550 mmworking height 2350 mmpressing depth 100 mmweight approx. 2000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Nwodpfx Aievwfw Do Ten

Condition: like new (used), As a leading manufacturer of used concrete block making machines worldwide, we offer you high quality service with a brick making machine. Concrete block making machines that we reproduce used for many countries in the world have the best equipment and design. We are always a solution partner for those who are looking for a concrete block making machine to buy. In addition, our company will help you with equipment and spare parts for concrete block making machines and achieve fast results for you with its wide range of products. fast results for you with its wide range of products. The products we mainly produce; concrete plant, stone crushing and screening plant, mobile concrete batching plant, briquetting machines, concrete mixer and all stone crusher machines and their parts. Njdpfotqzv Ajx Ai Tjwn As a leading used concrete block machine manufacturer in the world, we offer you high quality service with a brick making machine. Concrete block machines that we reproduce used for many countries around the world have the best equipment and design. We are always a solution partner for those who are looking to buy a concrete block machine. In addition, our company will help you with equipment and spare parts for concrete block making machines and achieve quick results for you with its wide range of products. The products we mainly produce; Concrete plant, stone crushing and screening plant, mobile concrete mixing plant, briquetting machines, concrete mixers and all stone crushing machines and their parts. Subject to input errors, changes, errors and prior sale. The information given in our advertisements, on the Internet, on price tags and pictures are non-binding descriptions and do not serve as guaranteed characteristics. The seller accepts no liability for typing and data transmission errors.

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Nodjt Tqy Eepfx Ai Town Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: excellent (used), Working length 250 cm Height 136 cm Nsdpjwgky Uofx Ai Tewn Width 60 cm Pneumatic drives Electric lifting

Year of construction: 2026, operating hours: 1 h, condition: new, machine/vehicle number: H10TM, Universal testing machine H10TM Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 84 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Njdpfx Aszuma Rsi Town Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Load cells: 5N-10N-20N-50N-100N-200N-500N-1kN-2kN-3kN-5kN-10kN - Grips: Compression platens, bending fixtures, shear fixtures, wedge grips, scissor grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2002, condition: like new (used), machine/vehicle number: 16.34.02, 6 Die 6 Blow Header MULTIPRESS MP610LS Maximum Cutoff diam. (500/Nmm2): 12 mm Max. Cutoff length : 105 mm Max. KO length (die side): 80 mm Nwedsh Tkraopfx Ai Ton Max. PKO length: 23 mm Max. Speed: 180 ppm

Condition: used, Year of construction: 1979, Press length: 3000 mm Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Pressing pressure: per cylinder Cylinder stroke: mm Nwsdpfx Aioy A Hkhe Ton Hold-down device: no Machine length: 2700 mm Machine width: 1000 mm Machine height: 1400 mm Weight:

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), 1 Hydropneumatic press type STHP 60 kN with two-hand operation - floor model with and without base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier which can increase the punching force up to 5 times. During the working stroke, the punching cylinder is pressurised with oil by the pressure intensifier and thus has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders. Nodpfx Aiopn Unvo Tswn

Condition: ready for operation (used), Year of construction: 1993, mobile, drilling from the front, 1 core drill D=34 mm, 2650 mm long, approx. 1200 mm deep, operating manual Njdpsx Ez Nksfx Ai Town

Condition: excellent (used), Material receiver for sander or planer Nodpox Ahhrefx Ai Tewn Total length: 4500 mm Total width: 120 mm Pneumatic discharge Roller width: 260 mm

Condition: excellent (used), Year of construction: 1994, Device description: Njdpfxowyb Ntj Ai Town grinding top/bottom working width 200mm electric adjustment of the upper unit star/delta start-up installed power 14kW pneumatic belt tensioning belt oscillation working height up to 150mm

Condition: ready for operation (used), Grinding and polishing machine of a shoemaker company . Nwsdsvb Uqhspfx Ai Tsn Manufacturer Hess SB- Automatenbau , Model 802 / 114

Year of construction: 2025, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Nwedpfx Aiemdn Tro Tjn Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2002, condition: like new (used), functionality: fully functional, L x W x H: approx. 12,1 x 3,0 x 3,25 m Volume: 55 cbm capacity: approx. 150 m³/h Nwjdpfxsllvpze Ai Ten 6 dosing-/discharging-screws - pair driven each 11 kW weight: approx. 15 t.,

Condition: used, Year of construction: 1992, second handMake HessType SO-1992-811Year of construction 1992Track length approx. 3200 mmBand width approx. 250 mmMotor 0.25 kWRequired space approx. 3250 mm x 800 mm x 1600 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaulwithout guarantee and warranty Nwsdpfx Aevwf H Ssi Ten

Condition: used, Year of construction: 1986, - 2 pneumatic cylinders along the length - 2 pneumatic cylinders along the width - 2 pneumatic workpiece clamping devices - Feed belt width: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Machine dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg Njdpfx Aoiim Rnei Town