Used Hydraulic 2-Roll Plate Bending Machine / Two-Roll Round Bending Machine for sale (117,229)

Condition: good (used), functionality: fully functional, Year of construction: 1999, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller model: 4 axis digital readout, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 370 mm, roller diameter: 370 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 1,900 mm, sheet thickness (max.): 40 mm, overall weight: 15,000 kg, total length: 5,300 mm, total width: 2,100 mm, total height: 2,400 mm, power: 25 kW (33.99 HP), input voltage: 380 V, number of digital displays: 4, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 roll plate bending machine Faccin model hydraulic 4HEL2,5 30/25 year of make 1999 Linear guideways rolls motion plate width 2500 mm plate thickness 30 mm rolling capacity 2500 x 30 mm prebend 2500 x 25 mm top roll size 370 m lower roll size 350 mm surface on the rolls 2550 mm voltage 380/50 power installed 25KW Bedszd Sw Topfx Ablslk configuration installed Hardened surface of the 4 rolls conical plate bending hydraulic open drop-end digital position readout of the rolls. NC programmable 4 axis Control panel electric

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t Bedpfx Aet Hmlqsbljlk dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: ready for operation (used), Roll bending machine FASTI - Type 2040x2mm - GS certification - Roller diameter 105mm - Max. sheet thickness over the entire length 2mm - Foot switch - Safety device Dimensions: L x W x H 3 x 1.1 x 1.4 meters / Weight: 1500 kg Bljdpfx Abjzb Emdslsk Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, We are selling this 4-roller sheet metal bending machine. Sheet width: 3150 mm Sheet thickness: 40 mm Machine weight: 93,000 kg Upper roller diameter: 600 mm Bljdpfx Abjzcp Axoljk Minimum bending radius: 480 mm Bending speed: 6.8 m/min

Condition: good (used), functionality: fully functional, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 350 mm, side roll diameter: 325 mm, roller diameter: 350 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 1,500 mm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, overall weight: 13,000 kg, total length: 5,400 mm, total width: 1,950 mm, total height: 2,350 mm, power: 25 kW (33.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, PLATE BENDING ROLL PINCH PYRAMID ON LINEAR GUIDEWAYS Bending capacity -Plate width 2500 mm -Rolling plate thickness 25 mm -Prebend thickness 20 mm -Rolls useful length 2550 mm -top roll D 350 mm -side rolls D 325 mm Hardened high strength surface of the 3 rolls Roll rotation driven hydraulic motor with gear unit Conical bending hydraulic tilt angle set of siderolls Re-rolling system welded shells rounding. Opening hydraulic front drop-end top roll tiltup Electric motors 25 Hp on hydraulic unit Vac 380/50 Digital position readouts of the bending rolls Bodpjzdk Tyjfx Ablolk Manuals with the machine Dimension mm5400x1950 x H 2350 mm -weight 13 ton

Condition: as good as new (ex-display), Year of construction: 2024, turntable diameter: 390 mm, bending angle (max.): 360 °, Stierli Radial 2500 CNC bending machine Radial bending machine with large rotary table for bends up to 360°. Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Pre-feed machine year 2022 incl. hand- and foot pedal Machine as new Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. Bedpfxegqfp Hs Ablolk The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) This machine solves your bending tasks!

Condition: used, functionality: fully functional, Year of construction: 2001, Hydraulic bending cylinder, SERTOM brand, model EMO 30-25. Year: 2001 Blodpfx Aboza U Hdelek Used machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) - Effective bending length: 500 mm - Minimum bendable diameter: 40 mm - Automatic cycle management Blodoxdr Skepfx Ablok - Pedal operation - Digital position display Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available.

Condition: good (used), functionality: fully functional, BEYELER HYDRAULIC BENDING MACHINE 3000X100 TON. MOTORIZED REGISTER, 3 AXES. RECESS 250. DIMENSIONS: 350X160X245 cm (H), WEIGHT 6,500 KG (65 QL.) Bljdpfovxif Iex Ablsk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11/10575, working width: 3,000 mm, sheet thickness (max.): 16 mm, TECHNICAL DETAILS Sheet metal width: 3,000 mm Sheet metal thickness: 16 mm Control system: conventional MACHINE DETAILS Rated current: 63 A Voltage: 380 V Bsdpezapqwsfx Ablelk

Condition: new, Year of construction: 2026, - Capacity: 700 x 4 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical rollers - Rotatable upper roller - Brake motor - Foot switch - Emergency stop Bodpoh Rbvgefx Ablolk - Documentation - 400V

Condition: new, Year of construction: 2026, number of rollers: 3, - Capacity: 700 x 4 mm - Conical rollers - Removable top roller - Brake motor - Foot pedal control - Emergency stop - Documentation Bsdpfx Aeh Raytoblolk - 400V

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Bodpfxey D Npis Ablslk Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm Bledpfxeyzim Ao Ablek The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Blsdpfxoy D Ngzj Ablok Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit Bsdpfxjy Aubuj Abljlk console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 150 mm, roller (top) diameter: 170 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 1,500 kg, total length: 2,500 mm, total width: 800 mm, total height: 1,100 mm, power: 5 kW (6.80 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, PLATE ROLL 2000x6 mm SERGI 3ROLL INITIAL PINCH ASYMMETRIC 2050 X6 MM Rolls length 2050 mm -Top roll 170 mm -lower/Side rolls 150 mm -Power electric 5,5 Hp Capacity -plate width 2000 mm -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Pinch roll position with handwheel Front open manual drop-end -Readout gauge of side bending roll -Foot-pedal electric rollers rotation back/forth -Joystick electric control of side roll Blodpfsx Ewa Ejx Ablek -Safety installations with emergency stop.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Bjdey Tbf Ispfx Ablslk Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: used, functionality: fully functional, Year of construction: 2007, Plate bending machine: Birlik KSM 1280X1 plate bending machine type: KSM year of manufacture: 2007 bending length: 1300 bending capacity: 1mm roller diameter: 2x90mm, 1x50mm cone bending equipment mains voltage: 400v 50Hz 0.75kw foot pedal operation. Currently, a gear motor with a higher speed than the standard is installed. machine length: 1900mm machine width: 550mm height: 1300mm Blsdpfx Absw Ty Duelek weight: 300 kg high-strength rollers according to SAE 1050 certificate

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: - Pressing force 420 kN / 42 t - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH Bedey Uwhbspfx Abljlk - for angle programming + length programming - controlled length stop 3000 mm - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 3ROLL 4000 X 6 MM, roller (bottom) diameter: 300 mm, roller diameter: 310 mm, roller length: 4,050 mm, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 11,000 kg, total length: 5,700 mm, total width: 1,500 mm, total height: 1,700 mm, type of input current: three-phase, working length: 4,000 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Thickness plate rolling 6 mm Pyramid 3 rolls with pre-pinch cylindrical plate rolling Conical plate rolling Rollers surface length 4050 mm Top roll 310 mm Side rolls 300 mm Datasheet power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Bledpsvn I Hcjfx Ablok Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton machine in working condition dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 Bedpoxnmb Isfx Ablslk CAPACITY plate width 4000 mm plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Bsdpfxsid Al Ns Ablolk Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands Blodpfxjwfc S Te Ablsk -position readout digital display for rolling memorize and repeat

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs Bedpfew Hpzwsx Ablolk