Used Hymmen Hymmen As Veneer Guillotine (1967) for sale (9,908)

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Item No. 24215 Gbsdpfx Afjtpnldeueu Technical data: - max. working width 3040 mm - max. material thickness 4 mm - manual adjustment of cutting angle - stroke rate up to 34 1/min - rear stop with positioning control Pos100, 750 mm - front angle stop - 2 front support arms - rear guard with light barrier - electric foot switch - pneumatic connection 6 bar - power supply 400 V - space required without support arms approx. W 4000 x H 1400 x D 2100 mm - weight approx. 4700 kg

Condition: used, Year of construction: 1980, machine/vehicle number: xxxx, Lg.no. 24211 Technical data approx: - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1.5 mm - man. back gauge adjustable up to 550 mm - front angle stop - sheet hold-down device - Table size 1100 x 650 mm - Working height 900 mm Gedpfx Afst H I Aqeujbu - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg - mobile

Condition: good (used), Year of construction: 1980, Travel X/Y/Z 350/250/300 mm, table size 480x360 mm, table - quill 450 mm, max. power 40 A; 4,8 kw; DRO Heidenhain, wire control system 3R, working hours 21383 h Gsdeiv H Egopfx Afusbu

Condition: ready for operation (used), IN STOCK stack lift 650 kg Godoir A Iqopfx Afuobu

Condition: new, Lathe completely overhauled, both electrically and mechanically, restored to like-new condition with repainting. Replacement of the electrical cabinet with a Siemens Series 1500 PLC. Overhead control panel. Replacement of cables and microswitches. Overhaul of the main motor. Replacement of the leaking lubrication oil pump. Replacement of the tool cooling pump. Check of the door closing system with an electromechanical system. Gsded Hza Iopfx Afujbu Pneumatic unit. Loader interface. End-of-bar position 1. Replacement of all bearings. Overhaul of carriages. Replacement of camshafts. Replacement of all lubrication distributors. Replacement of working and threading clutches. Pneumatic tailstock. Fixed and rotating front chucks. Diameter variation 20. CE certification with attached documents.

Year of construction: 2024, condition: new, Manufacturer: DURMA Type: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Gbedpfx Afjd R Er Dousu Number of strokes per minute: 42 Motor power: 7.5 kW Rear gauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment Control unit EZM9910 Rear gauge range 750 mm, programmable via the control unit Plastic inserts for the hold-down device 1 side gauge and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring-loaded flap gauge in the T-slot of the support arms Ball screw Table plates with ball bearings Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle gauge 0-180° The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2025, Equipment: CE marking, Plate shear with pneumatic sheet metal holding device Cutting length 3100 mm Sheet metal thickness MS (450 N/mm²) 6 mm Sheet metal thickness SS (700 N/mm²) 4 mm Strokes per minute 15 1/min Cutting angle 1° 30’ Number of clamps 16 pcs Maximum clamping force 14 t Back gauge 1000 mm Back gauge speed 200 mm/sec Motor power 15 kW Oil tank capacity 200 l Overhang 50 mm Support arms 2 pcs Support arm with side stop Table height 865 mm Table width 500 mm Table length 3515 mm Machine length 4110 mm Machine width 2200 mm Overall width 3700 mm Machine height 2100 mm Weight 7650 kg High-performance steel construction St 44 & stress-relieved, annealed machine frame D-Touch 7 touchscreen CNC control, user-friendly, central cutting angle adjustment Ball screw, 1000 mm & automatic tilting Support balls in the table for better material handling Side stop with scale & T-slot and tilting stop Support arms with T-slot and tilting stop Cutting line lighting & 1 m retractable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling back gauge Cutting line lighting Foot pedal CE standard for EU Gjdped Ewubsfx Afuobu The machines can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2007, condition: good (used), Used Bystronic Model VR – 3100mm x 6.5mm guillotine for sale Make: Bystronic Byshear Model: VR 6.5-31 Cutting capacity: 6.5mm Cutting length: 3100mm Rake angle 0.5-2.5 Back gauge range 1200mm Max Back gauge speed 180 mm/s Hydraulic Variable Rake Guillotine Shear. Including cnc control CYBELEC DNC 60 Programmable Back Gauge. Auto Blade Gap Adjustment. Front Supports & Squaring Arm. New/year 2007 Godpfoq Dpuhsx Afujbu Bystronic vr 6.5 x 3000 – 3metre x 6mm guillotine for sale

Condition: good (used), Motor control, controller, converter, stepper drive, stepper motor control, frequency converter, motor controller, servo drive controller Gedpop E Hz Tjfx Afujbu -Manufacturer: Festo, Motor Controller -Type: CMMS-AS-C4--3A G2 572986 -Number: 2 controllers available -Price: per piece -Dimensions: 310/60/H180 mm -Weight: 1.4 kg/pc.

Condition: used, Sharpening machine CINCINNATI AS Godpfsuhbnbsx Afusbu

Year of construction: 2022, condition: as good as new (ex-display), strand-pelletizer Gedpfx Afscpg Rqjujbu type Alphatec AS-G 200 Rotor width 200 mm ᐳ hard-metall cutting rotor drive 7,5 kW - AC speed frequency controlled Capacity 700 kg/h - depending material specifications More strand-Pelletizers ( ST ) ex stock Wuppertal-Germany available, ask for our most recent stock-list or visit us, you´re welcome

Condition: new, Year of construction: 2026, Guillotine-style sabre shears for cutting sheet metal, soft materials, linoleum and plastics. The solid construction and use of high-quality steel blades ensure precise cutting of various materials. The machine requires little physical effort during operation. Machine features The machine is designed for fast and precise cutting of various materials Godpfx Afsvzqlueusbu Indispensable shears for every workshop, hobbyist and DIY garage The machine can be fixed to the floor Lever handle equipped with a comfortable rubber grip Stable and robust machine construction Blade made of high-quality steel Base included as standard Technical data HS-1000 Cutting length 1000 mm Sheet thickness 1.5 mm Dimensions 1365 × 500 × 1700 mm Weight 70 kg Manufacturer: Cormak

Condition: refurbished (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 21780, control type: CNC control, actuation type: hydraulic, back gauge: 750 mm, overall weight: 4,500 kg, total length: 3,800 mm, total width: 1,650 mm, total height: 1,750 mm, number of support arms: 1, warranty duration: 12 months, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HACO HSLX 3006 in new condition Equipped with a new set of blades and a new control system. Technical condition: Excellent Capacity for regular steel: 6 mm (400 N/mm2) Length of back gauge: 750 mm Control system: SC 101 (NEW) Max. cutting angle: 3.0° Number of clamps: 18 Strokes per minute at smallest angle: 14 Strokes per minute at largest angle: 8 Working height: 770 mm Motor power: 7.5 kW Total length: 3800 mm Total height: 1750 mm Total width: 1650 mm Total width with CE guarding: 2700 mm Weight approx. 4500 kg Year of construction: 2010 Gbjdpfx Afszxgu Njuju Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: used, Second-hand Kuper veneer joining machine for the professional joining of veneers. Technical data: Gedpezxhg Tefx Afusbu - Motor: 0.55 kW

Condition: good (used), Year of construction: 2002, machine/vehicle number: 27/5, Offer 26238 Technical specifications: - Max. working width: 3190 mm Gedpfxjzwm Hij Afuobu - Max. material thickness at 40 kg/mm² tensile strength: 6.3 mm - Cutting angle: 1.2° - CNC cutting gap adjustment - Strokes: 30 to 64 1/min - Stand extension: 100 mm - Table height: approx. 800 mm - Number of clamps: 16 pcs - Back stop: 5 - 1000 mm; - 3 pcs front support arms: 1500 mm - E-foot pedal - Rear tilting roller table - Drive: 400 V / 18.5 kW - Space requirement: approx. W 3900 x H 1800 x D 2100 mm - Weight: approx. 6800 kg - Includes: - CNC control system RAS - Rear tilting roller table / sheet metal lifting device - Movable material collection container - Electronic rear safety device / light curtain

Condition: good (used), Year of construction: 1991, machine/vehicle number: 110 302, Offer 26213 Gbedpfx Afezwm Rzeusu Technical data: - max. working width 1030 mm - max. material thickness at 40 kg/mm² tensile strength 2 mm - adjustable back stop 10 - 500 mm - front angle stop - extendable front support approx. 400 mm - space requirement approx. W 1250 x H 1050 x D 750 mm - weight approx. 700 kg

Condition: good (used), functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, The cutting tool can be used with 4 different attachments, with 2 currently in use. Manufactured in Germany. Gsdszmyyzopfx Afujbu

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2004, working width: 2,500 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 2,500 mm, Refurbished machine HACO hydraulic guillotine shear, TS 2.5m x 6mm model New SP9 control system Gbjdpfozp U H Uox Afuju Retractable rear stop with 820mm stroke New, four-edged blades made of stainless steel

Condition: like new (used), Year of construction: 2015, Suction capacity without/with dust bag: 1800/1520 m³/h Gedpszvm I Dofx Afujbu Spindle speed: 2800 rpm Drive motor: 400 V, 0.75 kW

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 350 mm, cutting width (max.): 520 mm, control type: manual, roller diameter: 540 mm, pivoting range: 15 °, actuation type: manual, rotational speed (max.): 950 rpm, total height: 1,970 mm, total length: 870 mm, total width: 620 mm, overall weight: 234 kg, table height: 840 mm, Equipment: documentation/manual, motor brake, • Heavy-duty design with high weight for maximum smooth operation • Cast-iron flywheels with rubber coating and cleaning brush • 3-roller precision saw blade guide as standard, located at the top and bottom • Large cast-iron saw table, swiveling from 0° to +15° with a ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Particularly quiet and precise operation thanks to the torsion-resistant machine housing Gbjdpfx Afszvd Egouju • Large cast-iron parallel guide with round bar guide, easily adjustable • Saw blade tension indicator • Self-braking motor

Condition: good (used), LVD Guillotine Shear Brand: LVD Gsdpfx Afszt Tmneuebu Type: MCVN 31/13 Year of manufacture: 12-81 Cutting capacity for steel: 13mm Cutting length: 3100mm Automatic angle adjustment Adjustable cutting clearance Power: 11KW Condition of blades: good Machine weight: 11000KG Length: 3900mm Width: 3550mm Height: 2350mm

Condition: good (used), Year of construction: 2006, machine/vehicle number: 38461, Offer 26186 Technical data: Gbsdeztvn Uopfx Afuou - max. working width 1275 mm - max. material thickness (at 40 kg tensile strength) 3 mm - front angle stop - front material supports approx. 300 mm - rear stop, manually adjustable 5 - 650 mm - stroke rate approx. 32 /min - cutting angle 1.9 ° - preselection for single stroke / continuous stroke - drive 400 V / 3.0 kW - E – foot switch - protective guard on the rear of the machine - space required, including rear stop, without front support arms - approx. W 1500 x H 1150 x D 1450 mm - weight approx. 1200 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 861953, cutting length (max.): 2,050 mm, cutting height (max.): 60 mm, overall weight: 1,600 kg, cutting width at rip fence: 800 mm, Casati TSA/0 2050 Machine Number : 861953 Year of Construction : 1986 Cutting Lenght 2050 Cutting hight 60 Max rear feed width 800mm Min rear feed width 25mm Gbedoztyfqepfx Afuou

Condition: used, functionality: fully functional, Type: Hydraulic Guillotine Manufacturer: HJO, Sweden Year: 1984 Max. plate thickness 4 mm Godpfx Afjxgcz Ijujbu Max. plate length 2500 mm Max. operating pressure 21.0 MPa V 3 x 380 Hz 50 Weight 3700 kg Quick action blade clearance adjustment, floor pedal control.

Condition: used, Oil Mist Extractor, Emulsion Mist Collector, LOSMA AS.7 Oil Mist / Emulsion Mist Separation Unit – Aspirofilter (2000), Used Machine Manufacturer LOSMA S.r.l. (Curno, Bergamo, Italy) Model AS.7 Overall Dimensions Width: 540 mm Depth: 580 mm Height: 610 mm Technical Specifications Year of Manufacture: 2000 Type: Oil Mist and Emulsion Mist Extraction Unit Series: Aspirofilter Condition: Used machine. Manufactured in 2000. Filter replacement required. Suitable for industrial oil mist and coolant mist filtration applications. Gedszdgawepfx Afusbu