Used Jointer for sale (282)

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Technical specifications: Length of jointer table: 2100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Ibodpfxsxgkf Uj Anmea Planer spindle speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm With an optionally available smaller planer head for the left spindle plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: each 3.7 kW Motor power top (thickness spindle): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 increment control Including step-controlled feed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum professional configuration, optionally with Tersa or spiral cutter block Equipped with TERSA cutter block for tool-free, second-fast planer knife changes TERSA planer knife system allows for exceptionally quiet operation Helically serrated steel infeed roller for consistent and uniform material feed Material feed with two speeds, powered by a separate motor Extra-long surfacing tables for easy and precise dressing of workpieces Work tables made from annealed and stress-relieved cast iron, robust and permanently flat Simultaneously rearward-opening surfacing tables for minimal setup times Thickness table adjustment via handwheel with numerical height display High machine weight ensures maximum precision and vibration-free operation Powerful industrial motor Robust steel/cast iron construction Chip removal starting from 0.2 mm (at minimum workpiece thickness of 3 mm) due to helically serrated feed roller (ideal for economical planing of precious hardwood) Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or screwing required Blade changes in seconds Self-locking Ibodpfx Anew Rhkqjmea Exceptionally quiet operation Material feed: Helically serrated steel infeed rollers for consistent wood feed without markings Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Permanently mounted extraction hood: With the fixed extraction hood, there is no need to change the extraction hose during retooling This saves valuable working time Simultaneous opening of surfacing tables: Both surfacing tables can be tilted up together, spring-assisted, for fast and convenient conversion to thicknessing mode in seconds Thickness table adjustment: FS 41 elite s with thickness table adjustment by handwheel and integrated indicator The thickness table is guided on four large-dimensioned spindles providing maximum stability in all operating conditions. A special lifting device keeps the table position perfectly stable even without locking. Anti-kickback devices: Massive anti-kickback devices prevent kickback of workpieces The 4-knife cutter block ensures optimal planing results Anodized aluminium surfacing fence: Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° with scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital version: With electric thickness table height adjustment and digital display Scope of delivery: Jointing/edge fence with round bar guide 2 feed speeds Tersa cutter block Technical Data Overall surfacing table length: 2200 mm Surfacing infeed table length: Surfacing table height: Surfacing working width: 410 mm Surfacing maximum cutting depth: 5 mm Surfacing fence dimensions: 1200 x 150 mm Surfacing fence tilt range: Thickness table dimensions: 775 x 410 mm Min. thicknessing height: 3 mm Max. thicknessing height: 240 mm Min. thicknessing workpiece length: Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs. Electric...

Condition: ready for operation (used), Year of construction: 1989, Working width 300mm Working height 200mm 5 spindles Spindles diameter 50mm Spindles set: 1. Bottom – 7,5kW 2. left – 7,5kW 3. right – 7,5kW 4. top – 11kW 5. bottom – 7,5kW Feed speed max 34m/min – variator Feeder with cardan Toothened roll in the table before first head Ijdpfx Asw Afk Honmsba Table lubrication Jointer on two last heads

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Ibjdpfx Ajvwgh Ronmoa Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, Thickness planer: Max. planing width: 400 mm Max. planing height: 190 mm Cutterhead diameter: 100 mm Number of knives: 3 Cutterhead speed: 5000 rpm Manual adjustment of working height Jointer: Total length of tables: 1990 mm Adjustable tables Noise reduction of the cutterhead Cutterhead guard Dust extraction port: 120 mm Tilting fence Drill press: Table: 550x275 mm Lateral displacement: 190 mm Infeed displacement: 100 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Iedpfx Aozia Dlenmeba Length: 1990 mm Width: 1150 mm Height: 1270 mm

Condition: used, Thickness planer/jointer: Max. planing width: 410 mm Max. planing height: 240 mm Cutterhead diameter: 100 mm Number of knives: 3 Total length of table tops: 2000 mm Table top size adjustment Horizontal drilling machine: Drilling table is movable Isdpfjziaxpox Anmjba Lateral feed Eccentric clamping Total power: 4.44 kW Power supply: 380 V Overall dimensions Length: 2000 mm Width: 1160 mm Height: 1300 mm

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 226-60758, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Feed motor: 2.2 kW Feed speed: 5–24 m/min Total power requirement: 25 kW Dimensions (Length/Width/Height): 3400 x 1800 x 1610 mm Ibedpfxow Svb Tj Anmja Machine weight: approx. 2500 kg Four-Side Planer WEINIG PROFIMAT 23 E - Year of manufacture: 1997 - Serial number: 226-60758 - Maximum working width: 230 mm - Maximum working height: 120 mm - Cardan shaft feed, stepless adjustment 5–24 m/min - Feed motor: 2.2 kW - 1st spindle (bottom): 4.0 kW - 2nd spindle (right) – motor for 2nd right and 3rd left spindle: 7.5 kW - 3rd spindle (left) - 4th spindle (top), motor: 5.5 kW - 5th spindle (bottom), motor: 4.0 kW - Electrically adjustable height and depth: 0.25 kW - All spindles equipped with brake motors - Spindle speed: 6,000 rpm - Spindle diameter: ø 40 mm - Planing table: 2,000 mm with serrated table inserts and straightening guide - Feed rollers with pneumatic pressure - Feed roller diameter: 140 mm - Transport rollers opposite left spindle - Infeed roller before jointer with pneumatic actuation - SICO counters - Manual wax pump - Centralized lubrication points - 1 set of planing heads - Total connected load: 25 kW - Machine dimensions: L=3400 mm, W=1800 mm, H=1610 mm - Weight: 2500 kg

Condition: new, Work table adjustment in the infeed using a parallelogram system Display for chip removal via a degree scale Simultaneous height adjustment and locking of the work tables, complete with anti-tipping device Quick changeover system for switching from planing to thicknessing (CE version) via a special support for opening the planing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic support "READY" Electronic control includes: – Adjustment of the thickness table – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hour counter Automatic star-delta starter for the main motor Machine table with height adjustment via 4 steel leadscrews Isdsd Akyzspfx Anmoba Rubber-coated infeed roller in the outfeed Interchangeable feed rollers Segmented pressure shoes in the infeed Planing shaft and setting gauge for planing knives Micro-safety switch for correct positioning of the planing tables and extraction hoods Planing guard (CE version) Automatic motor brake on the main motor Thermal overload switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data: Usable working width [mm] 520 Total table length [mm] 2310 Knife shaft diameter [mm] 120 Motor power [kW] 9.0 Hz 50, 400 V Planing shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminum planing fence [mm] 1200 x 190 Planing fence angle adjustment from 90° to -45° Min./max. Planing height [mm] 3 / 250 Feed speed, thickness [m/min] 5-8-12-18 Extraction hood diameter, planing [mm] 120 Extraction hood diameter, thickness [mm] 120 including options - "TERSA" knife shaft with disposable, reversible knives - pivoting auxiliary fence for thin workpieces

Condition: new, both working tables open at the same time! working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm working table length 2200 mm thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Motorleistung 5,0 kW, 400V, 50 Hz Ibodpfxjdvn Hwo Anmja incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces electric height adjustment for thicknessing table with digital readout

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch techiscal data: total planer table lenght 2250 mm max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg Ibjdscq E Uuspfx Anmea - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: excellent (used), Thickness planer and jointer, 350 mm width Router Blade diameter: 300 mm Miter saw with 3000 mm carriage Spindle molder, spindle diameter 35 mm Drilling machine 400 V Iodpsziuviefx Anmjba

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Ibodpfx Aszfilwsnmea Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: new, Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Ibodpsvwflnefx Anmea

Condition: used, Year of construction: 2003, equipped with Tersa cutterblock and electric height adjustment, tables measured with top precision max. 1/10 mm completely set up used top condition cleaned functionally tested partially refurbished Manufacturer: SCM Type: FS 410 Year of manufacture: 2003 Machine no.: 159435 CE type-tested GS dust-tested Number of cutters: 3 Feed rate m/min: 6 + 12 Bridge guard Slotted table lips Low-noise table lips Motorized automatic brake Tersa cutter system Rubber draw roller Digital display for planing height Electric height adjustment with fine adjustment Extraction hood integrated Motor kW: 5.5 Planing width approx. mm: 410 Planing height approx. mm: 240 Table length approx. mm: 2100 New price approx. €: 7500.00 Extraction connection mm: 100 Space requirement approx. L x W x H mm: 2100x900x1300 Weight approx. kg: 710 Ibsdpfezd Hdnex Anmoa Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, with segmented infeed roller and segmented pressure bar Tables with top accuracy of 0.0 – max. 1/10 mm Bridge-type, single-sided reversible knife system Iodpozd Hc Refx Anmeba completely adjusted used good condition cleaned functionally tested partially refurbished Manufacturer: Kölle Type: HK63 Machine no.: 1409 Number of knives: 2 Feed rate m/min: 2 speeds Jointing strip Table guide rollers Segmented pressure bar Segmented infeed roller Integrated dust extraction hood Planing width approx. mm: 630 Planing height approx. mm: 220 Table length approx. mm: 2100 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 2200 x 1300 x 1400 Weight approx. kg: 1200 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1994, from an authority Centro-Fix cutterhead rubber extension completely adjusted used in top condition cleaned functionally tested partially refurbished Manufacturer: Panhans Type: 445-A Year of manufacture: 1994 Machine no.: 410 GS-tested for wood dust Number of cutters: 4 Feed rate m/min: 7 + 14 Auxiliary stop Table lips with slots Table lips with low noise motorized automatic brake Centrofix reversible cutters Table guide rollers Articulated pressure bar Rubber extension roller Digital display for planing height Electric height adjustment with tip fine adjustment Handwheel fine adjustment Ibsdpfx Anezd Hcqomea Extraction hood integrated Motor kW: approx. 5.5 Planing width approx. mm: 510 Planing height approx. mm: 200 Table length approx. mm: 2250 Extraction port mm: 160 Space requirement approx. L x W x H mm: 2300 x 1050 x 1400 Weight approx. kg: 1000 Total connected load approx. kW: approx. 5.5 Location: 97447 Gerolzhofen, free loading, unpacked Transfer in current condition as inspected, without warranty and guarantee

Condition: new, Year of construction: 2026, The CORMAK PT265T Planer-Thicknesser is a professional machine designed for intensive and precise machining of solid wood and wood-based materials. The new version features an innovative combined table system that significantly increases work efficiency and eliminates setup errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable tool for carpenters, craftsmen, and production workshops. Key Advantages New combined table system – constant calibration of the infeed and outfeed tables eliminates errors and improves precision. Stable cast-iron construction – 170 kg machine weight minimizes vibrations and enhances safety. Total motor power S6: 2.6 kW – ensures smooth and efficient processing of hardwoods. Unique Benefit: Feed Rollers in the Thicknesser – specially designed roller extensions integrated into the thicknesser table support long and heavy materials, making feeding and receiving easier while improving surface finish quality. Easy conversion from jointer to thicknesser – quick switching between modes reduces operating time. Three HSS knives – precise cutting and high-quality surface finish. 265 mm working width jointer – large working area allows machining of wide workpieces. Construction and Technology The CORMARK PT265T is a modern wood thicknesser built on a robust, reinforced structure with cast-iron components. The worktables are ground and properly balanced, ensuring repeatability and accuracy. The new table system enables synchronized height adjustment—once set, the table level does not require recalibration when changing the planing thickness. The centrally positioned thicknesser table on a column ensures even material feed without deviation. Rubber feet further reduce vibrations, improving component durability and machining quality. Performance and Precision With a 2.6 kW (S6) motor, the machine delivers high efficiency while maintaining stable operating parameters, even when machining hardwoods. The cutterhead with a 75 mm diameter, equipped with three knives and running at 4000 rpm, ensures a perfectly smooth surface finish. A precise graduated scale allows accurate table height adjustment. The aluminum tilting fence (700 × 150 mm) with an adjustable angle range of 90–45° enables precise jointing at various angles. Standard Equipment Cutterhead with three HSS knives Aluminum fence 700 × 150 mm Graduated handwheel for table height adjustment Cutterhead guard Built-in dust extraction port Ø100 mm Anti-vibration rubber feet Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 4000 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives: 3 Cutterhead length: 262 mm Knife dimensions: 250 × 25 × 3 mm Max. jointer width: 265 mm Max. thicknesser width: 265 mm Max. planing height: 180 mm Ibodjy El R Ejpfx Anmea Max. thicknesser cutting depth: 3 mm Max. jointer cutting depth: 2.5 mm Feed speed (thicknesser): 6 m/min Fence dimensions: 700 × 150 mm Machine dimensions (L × W × H): 1080 × 269 × 1000 mm Weight: 170 kg Total motor power: S6: 2.6 kW Power supply: 400V

Condition: excellent (used), functionality: fully functional, working width: 410 mm, planing width: 410 mm, Planer, jointer SCM F410 Specification: • condition - used, after inspection • manufacturer - SCM • model - F410 • working width - 410 mm • table length - 2610 mm • fence adjustable for angle • motor power - 4.0 kW • spindle speed - 5000 rpm • chip thickness indicator • max cutting depth - 8 mm • noise dampening combs at the shaft • motor brake • four-knife shaft, 120 mm diameter, for traditional knives • star-delta starter • dust extraction outlet - 150 mm dia • weight - approx. 650 kg Iodpfxsx E Srvo Anmjba • CE marked • overall dimensions: 261 x 90 x 110 cm (L x W x H) Additional information: • very good technical condition • the presented photos show the actual condition of the item for sale • possibility to start and test the machine on site.

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) Isdpfxjiz Tzxs Anmsba 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) Iedou Udd Sopfx Anmoba 6 driven rollers in the table

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* Ibjdpfx Anozb Iggsmsa – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: excellent (used), Bargain from Swiss liquidation in excellent condition, 510 mm Suva guard Ibjdpfx Ansy Niwqjmsa

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, Maximum width of installation: 230 mm Minimum height of installation: 150 mm Number of spindles: 6 Speed and power: 1.lower 7.5 kW+contp 2.right 7,5 kW + jointer 3.left 7,5 kW + jointer 4.upper 7.5 kW + counterpoise 5.upper 7.5 kW +controller + jointer Iodpjupun Esfx Anmoba 6.lower 7.5 kW + control + jointer All heads included. Shafts 50 mm. All electric motors with brakes. Feed speed 6-50 m/min, frequency converter. Electric motor at infeed: 7.5 kW 4 drive rollers in table Table lubrication, automatic waxilite pump. Video of scrolling mechanisms

Condition: reconditioned (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 1816-257, planing height: 130 mm, spindle diameter: 40 mm, planing width: 230 mm, rotational speed (min.): 6,000 rpm, planer shaft diameter: 40 mm, workpiece height (max.): 130 mm, workpiece width (max.): 180 mm, shaft diameter: 40 mm, Weinig Hidromat H22B .8 spindles. Passage 230 x 130 mm. Станок посельно ТО. Machine for the production of high-quality propellant. Year of manufacture: 1981. №1816 - 257 Speed of feeding 6-50m\min, electric motor-7.5 kW, frequency РАСПОЛОЖЕНИЕ ШПИНДЕЛЕЙ / МОЩНОСТЬ ДВИГАТЕЛЕЙ: Ibsdpjvk Sfusfx Anmea 1. Horizontal lower – 5.5 kW. 2. Vertical right – 5.5 kW. 3. Вертикальный левый –7.5 kW; 4. Vertical right – 5.5 kW, 5. Vertical left – 5.5 kW. 6. Горизонтальный верхний – 5.5 kW. 7. Горизонтальный верхний - 5.5 kW, counter + jointer 8. Горизонтальный нижний - 5.5 kW, контропора + джоинтер Spindle speed 6000 rpm diameter of spindles-40mm Автоматический насос резиги стола. Пневмо прижим, давление вудка 6 Bar 5 leading rollers in the table There are video scrolling mechanisms

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, WEINIG planer type Hydromat 30R Year of manufacture-1984 №2609/686 Technical characteristics of the machine: Planing width 300 mm Planing height 150 mm Maximum feed speed 120 m/min, motor power 30 kW Spindle position: 1. Horizontal lower spindle- 15 kW + control + jointer Iedpjupurqsfx Anmeba 2. Vertical right spindle - 11 kW 3. Vertical left spindle - 15 kW 4. Horizontal upper spindle - 18.5 kW + control + jointer 5. Vertical right spindle-18.5 kW 6. Vertical left spindle - 18.5 kW 7. Horizontal upper spindle - 15 kW + control + jointer 8. Horizontal lower spindle-18.5 kW+control arm 9. Horizontal lower spindle - 11 kW + control + jointer - Spindle diameter 50 mm - Automatic table lubrication system - 9 drive rollers in table - Complete with tools and accessories -Knife head extractor included