Used Leister Heating Element 5.0-6.7 Kw for sale (45,965)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Dujdpfxsvf E Ave Abfeu Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, Small wood chipper, manufactured in Denmark, is new. Djdpoza U Emefx Abfjuu

Condition: excellent (used), I am offering for sale a professional, industrial-grade, twin-arbor multi-blade saw from the renowned A.COSTA brand, model PUMA. The machine has been serviced and is ready for immediate operation in the most demanding sawmill or industrial woodworking environments. Its robust construction, combined with powerful drives and modern control systems, makes it a machine with exceptional performance. Key technical parameters and advantages of the machine: Powerful main motors: 2 x 55 kW – ample power reserve guaranteeing smooth and trouble-free operation without any drop in RPM, regardless of the hardness of the wood being processed. Maximum cutting height: up to 190 mm. Modern feed system: Smooth feed speed adjustment via an inverter. This allows for perfect adaptation of the operating parameters to the specific material and optimization of the cutting process. Condition of the crawler tracks: Like new – ensures perfect grip, stable and precise material guidance without slippage. Precise control: The machine features an electronic height display. Dsdpszchy Ajfx Abfouu Additional information: The ergonomic control panel shown in the pictures, with clear ammeter indicators for both arbors, allows for constant monitoring of the engine load. The A.COSTA PUMA is synonymous with reliability and robust construction, ensuring trouble-free operation for many years to come. Please contact me for further technical details and to arrange a viewing.

Condition: used, Two Ystral jet stream agitators are for sale Dedpfxoga D I Uj Abfsuu Data on the agitator: RpM: 1465 V: 230 / 400 kW: 11 shaft length: 560mm Total length: 1220mm Blade diameter: 360mm For more information see data sheet

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 48619996840278, load capacity: 5,000 kg, enginetype: Electric, manufacturer: Bauer Dujdow Rzwkspfx Abfeu

Condition: used, mileage: 185,000 km, power: 125 kW (169.95 HP), first registration: 04/2017, fuel type: diesel, overall weight: 2,900 kg, next inspection (TÜV): 04/2026, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: air conditioning, central locking, navigation system, soot filter, Ford Transit Custom Double Cab 2x sliding doors 125 kW automatic alloy wheels front and rear parking sensors mobile phone preparation cruise control multifunction steering wheel navigation radio CD 230V socket electric windows electric seats air conditioning artificial leather seats Dedsza S T Ijpfx Abfjuu The vehicle is in good condition! Ford service book, last inspection at 169,778 km 2 keys

Condition: good (used), Gear motor, electric motor -Speed: 114 rpm -Power: 0.75 kW -Construction: B3 angle Duodpodff I Isfx Abfju -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 430/230/H185 mm -Weight: 18.7 kg

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg Duedpeypcryjfx Abfju

Condition: new, Year of construction: 2023, machine/vehicle number: H2200058, power: 4 kW (5.44 HP), pressure (min.): 10 bar, new piston compressor available immediately: ALMIG HLA-10-10-270 (10 bar) with 270 liter compressed air tank with star delta connection Dujdpfx Abezb E A Eofju Year: 2022 Hours: 0 h 3 cylinders Pressure: 10 bar Rated power: 7.5 kW Delivery quantity at 7 bar: 801 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1580 x 1311 x 657 mm Weight: 324 kg Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: used, Year of construction: 2026, operating hours: 987 h, functionality: fully functional, machine/vehicle number: 31681614, overall weight: 415 kg, power: 8 kW (10.88 HP), volume flow: 1.14 m³/h, operating pressure: 10 bar, noise level: 81 dB, Equipment: refrigerant dryer, used prototype (immediately available): RENNER Riko 1400/500 M-KT Piston Compressor with 2 x 4.0 kW piston compressors with RENNERtronic Touch control (base load change control + runtime limitation) wall mounting box with galvanized 500-liter tank standing with refrigerant dryer (DTP +3°C) and timed condensate drain with automatic level-controlled tank drainage Year of manufacture: 2026 Operating hours per compressor: 987 h Technical data: Motor power: 2 x 4.0 kW Rated voltage: 400 V Maximum pressure: 10 bar Delivery volume at 7 bar: 1140 l/min Duodpfxszb Etdo Abfsu Cylinders / stages: 2/2 Noise level: 81 dB(A) Compressed air tank volume: 500 liters Dimensions L x W x H: 1890 x 712 x 1446 mm Weight: 415 kg Shipping possible at extra cost. Leasing offer from our house bank possible for businesses. Takeover at the end of the term by payment of a final installment possible. Creditworthiness required. We always have a large selection of new and used compressors in stock! Immediately available.

Year of construction: 2023, operating hours: 32 h, condition: like new (used), functionality: fully functional, machine/vehicle number: IELE6J18Z047, Isocell Elements air injection plate. Functions perfectly. Duodpfozbyi Tex Abfeu 10" touchscreen. 20-meter hose included with the machine.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HTAT055HE - 2200389046, cooling capacity: 111 kW (150.92 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,536 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 19 m³/h, pump pressure: 1.26 bar, total width: 1,110 mm, total length: 3,415 mm, total height: 2,270 mm, warranty duration: 3 months, Equipment: type plate available, Heat pump, air-cooled chiller Manufacturer: MTA S.p.A. Model: Taurus HTAT 055/HE – 130 / 111 kW The Taurus HTAT 055/HE units are compact heat pumps/chiller sets designed for outdoor installation, including hydronic kit (200 l tank + P15 pump) for low ambient temperatures down to -20°C, equipped with electronic fan speed control (EC fans). Heating capacity (kW): 130 Heating water outlet/inlet temperature: 45 / 40°C Flow rate (m³/h): 22.5 Available pump pressure (bar): 1.03 Ambient temperature (°C): +7 Cooling capacity (kW): 111 Chilled water outlet/inlet temperature: 7 / 12°C Flow rate (m³/h): 19 Available pump pressure (bar): 1.26 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 60 Max. current (A): 98 Dedpfxsx Itfcj Abfsuu Starting current (A): 312 Protection class: IP54 Dimensions: Length (mm): 3,415, Width (mm): 1,110, Height (mm): 2,270 Weight (kg): 1,536 Connection: Rp 2 1/2" Serial No.: 2200389046 Year of manufacture: 2022 Condition: Cosmetic: 2, Technical: OK Used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Year of construction: 2019, condition: excellent (used), Adpak Smipack Heat Shrink Tunnel Year 2019 The SMIPACK T452 is a high-performance, double-chamber heat shrink tunnel Machine Dimensions: 1900 mm L x 835 mm W x 1440 mm H Tunnel Chamber Dimensions: 450 mm W, 230 mm H Dodpfx Absy Sx Absfsuu Conveyor Speed: Variable from 4 - 29 meters per minute Control System: FLXMOD® equipped with an alphanumeric LCD control panel and modular power section Cycles: Capability to store up to 10 different work cycles Film Compatibility: PVC, polyolefins, and polyethylene up to 80 mu Conveyor Belt: Features a motorized chain of silicone-coated rollers with an integrated product alignment device In excellent condition Ready for use

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, Duedpfx Aexyl Ecobfju CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, With proven CDF surface ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Djdpsi Dfidefx Abfsuu Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Duodpfx Abjbunq Hsfsu Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dusdpfjdvltysx Abfou Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h Duodpfx Asdwh E Aobfsu The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: excellent (used), Year of construction: 2016, Siemens 840 SL control, twin spindle, 20,000 rpm, HSK 63, 2 x 32 tool positions, internal coolant supply at 30 bar, X 550 mm, Y 400 mm, Z 400 mm, direct measuring system, workpiece changer, laser control, Knoll coolant system, fixture flushing system, central lubrication system, automatic loading doors, year of manufacture 2016. Dedpfozb D Rnjx Abfeuu

Condition: used, This listing is for the Cole Parmer Techne Blockice Cooling Heating Block The unit is in full working condition and is ready for immediate use The Cole Parmer Techne BLoCKICE (also referred to as CB-200, FBLOCKICE) is a benchtop Peltier-cooled/heated block designed for precise incubation of sample tubes between 0 °C and 40 °C, ideal for maintaining biological samples within the 4–37 °C range Precise temperature control: Utilizes Isotemp™ technology to ensure uniform temperature across both aluminum blocks, with stability to ±0.2 °C Djdpoxhfypjfx Abfjuu Versatile block inserts: Holds two standard interchangeable aluminum insert blocks from the Dri‑Block® range; can use one double-width insert for higher tube volumes Timer & alert system: Integrated count-up/count-down timer programmable up to 9 days. Timer begins only once the set temperature is achieved, with an audible buzzer at completion User-friendly interface: Features a five-digit LED display in °C or °F, plus a dark lid to protect light-sensitive reagents and help maintain temperature Dimensions & build: Compact footprint (~190 mm × 240 mm × 225 mm), weighing ~3 kg, operating on 100–230 V AC, 50/60 Hz Performance notes: Achieves 4 °C within ~30 minutes at 20 °C ambient; reaching extremes like 0 °C or 40 °C may take hours, although pre-cooling inserts can accelerate that

Condition: used, Year of construction: 1998, operating hours: 30,559 h, functionality: fully functional, overall weight: 825 kg, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 312 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, noise level: 70 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, ❇️ Atlas Copco GA30 FF Screw Compressor – 30 kW, 8.5 bar, top maintained For sale is a used, but very well-maintained industrial screw compressor from the premium manufacturer Atlas Copco, model GA30 FF with integrated refrigeration dryer. The unit was manufactured in 03/1998, has been regularly maintained, and was in reliable operation until February 2022. ⸻ ❇️ Technical Data • Model: GA30 FF (with integrated refrigeration dryer) • Year of manufacture: March 1998 • Motor power: 30 kW (approx. 40 hp) • Max. operating pressure: 8.5 bar (factory version) • Volume flow (FAD): approx. 5.2 m³/min (≈ 312 m³/h) • Connection: 400 V / 50 Hz / 3~ (5-pole) • Fuse rating: 3 × 63 A • Operating hours (at last maintenance): 30,559 h • Weight: approx. 800–850 kg ⸻ ❇️ Maintenance & Condition The compressor was last professionally maintained by DF Druckluft-Fachhandel GmbH on February 14, 2022. The following components were replaced: • Oil plug • Solenoid valve • Suction regulator kit Since then, the unit has not been operated. It was prepared for shutdown immediately after the maintenance and is therefore in operational condition. The compressor was stored in a dry and protected indoor area. ⸻ ❇️ Special Features & Equipment • FF model: integrated refrigeration dryer for dry compressed air – ideal for sensitive applications such as painting or control air technology • Elektronikon® control – clear control panel with operating data storage • Sound insulation canopy (industrial version) • Steel housing – transportable with pallet truck or forklift ⸻ ✅ Ideal for Workshops · Production facilities · Metal and wood processing · Tire service · Sandblasting technology · and more ⸻ ❇️ Location & Loading • Location: 71083 Herrenberg (near Stuttgart) • Assistance with loading on site possible (forklift available) • Inspection possible by arrangement ⸻ ❇️ Price & Contact Price: €2,790 plus 19% VAT. ———— ‼️ Please also take a look at my other items. It's worth it! Inspection and collection in 71083 Herrenberg. ⚠️ Shipping (by forwarding agent) or delivery is possible for an additional fee. Djdpfxoykk Rae Abfsuu

Condition: good (used), geared motor, electric motor Djdpfx Aocwl A Eebfeuu -Speed: 55 rpm -Power: 0.37 kW -Design: B3 angle -Hollow shaft diameter: Ø 24 mm -Protection class: IP 54 -Number: 1 engine available -Weight: 12.8 kg

Condition: excellent (used), WEG 75 kW engine in good working order, bearings replaced Dodpfx Abswiwfiofouu in perfect condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 25743, smoke pipe connection diameter: 600 mm, space requirement length: 20,000 mm, space requirement height: 6,000 mm, space requirement width: 12,000 mm, temperature: 110 °C, Mawera FSB1100 biomass heater with flat sliding grate With 1100 kW output, year of construction: 2007, general condition: very good. Complete with hydraulic insert incl. hydraulics, combustion chamber, heat exchanger, with all blowers, air preheating, flue gas recirculation, hydraulics for combustion grate and automatic pressure cleaning, multicyclone, automatic ash discharge with gravity discharge, flue gas fan and piping to chimney connection, control system, operating instructions. Silo discharge from push rods is also included. Inspection possible by prior appointment. Still in operation, dismantling in August 2024. Several pictures, videos on request. Dedpfx Aotu Nt Djbfsuu

Condition: excellent (used), Year of construction: 2021, DMU LASER TECH Fiber Laser Welder Like new - Year 2021 CE. 1 Kw MT 1000P Dsdpov Amxmefx Abfsuu Complete with cable and torch.