Used Lenoir Overband Separator for sale (6,353)

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: Njdpfx Aaodubpuj Relf *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. Njdpfxsbbr Ipe Aa Rslf At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Njdpjlwtzysfx Aa Relf Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: excellent (used), Year of construction: 2016, operating hours: 5 h, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, total height: 320 mm, control voltage: 24 V, year of last overhaul: 2025, compressed air connection: 4 bar, temperature: 60 °C, Equipment: type plate available, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) Nsdpfohr R Iujx Aa Rjlf • Overload tolerated above the device: 150kg • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. Nljdpfetp Thbox Aa Rsf The extraction unit can be inspected at our warehouse.

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum angled conveyor belt including substructure horizontal area 2000mm (adjustable) Rising range 4500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Nodpfxohh Ay Se Aa Relf

Year of construction: 2021, condition: new, Aluminum inclined belt conveyor including subframe inclined section starting at 50mm (adjustable) discharge area 1500mm (adjustable) belt width 500mm (adjustable) We supply our belt conveyors in PVC, PU or rubber. PVC belt including cleats and wave edge Drive: 0.25kW motor (adjustable), speed 0.3m/sec Connection 220/240V, 50Hz, protection class IP54 Drive, etc., ready for connection, motor control optional 6 adjustable machine feet for alignment Wave edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply, particularly resistant to transverse forces Our core competence lies in providing customers with exactly what they need. We work together with our customers to develop customized, individual solutions and supply corresponding equipment from our own production. Contact us by phone to find a suitable solution for your application. Njdpfxohh Dbao Aa Rolf Belt conveyor, conveyor system, discharge conveyors, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal detection (metal-free), neodymium, overband magnet, magnetic belt separator.

Condition: new, functionality: fully functional, machine/vehicle number: DMPMB1520x700x228, overall weight: 1,200 kg, Year of construction: 2023, Overband plate magnet, lifting magnet - overproduction Dimensions: Nlodperbk T Ajfx Aa Ref 1,520 x 700 x 228mm 6 threaded holes on the back Own weight: approx. 1,200KG These are sample photos all prices are net prices plus 19% VAT All information without guarantee, only while stocks last! conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application.

Condition: new, Year of construction: 2025, Overband Magnetic Separator – Type DMPM 2000 | Industrial Version Manufacturer: die magnetprofis GmbH & Co. KG Model: DMPM 2000 Condition: New / unused Availability: Immediately ex stock ⸻ Technical Description: The DMPM 2000 overband magnetic separator is engineered for the reliable and continuous removal of ferromagnetic contaminants from product streams. It is ideally suited for use in recycling plants, bulk material processing, crushing plants, conveyor lines, and material processing facilities. Nledpfx Aowx H E Dsa Rsf ✅ Key Features: • Design: Cross-belt discharge with motor & discharge belt • Magnet type: Permanent magnet (maintenance-free) • Belt width: 650 mm • Magnet length: approx. 2000 mm • Support structure: Robust welded steel construction • Drive: Electric motor with low-maintenance gearbox • Ready to operate: Pre-assembled, ready for operation, incl. lifting lugs • Options: Control unit in the form of a frequency converter, gallows for suspension ⸻ Fields of Application: • Recycling industry (metal, wood, construction debris, etc.) • Conveyor systems in the cement, energy, or waste sectors • Protection of downstream machinery (e.g., shredders, crushers, mills) • Food industry (optionally available in stainless steel version) ⸻ Scope of Delivery: • Overband magnetic separator DMPM 2000 (new unit) • Conveyor belt with drive unit • Suspension system (chains as required) • Documentation (operating manual, CE conformity) • Optional: Control – frequency converter Our core competence is delivering exactly what our customers truly need. Together with our customers, we develop tailored, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filtration systems

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute - Dust suppression - Electrical central lubrication Nsdpfeugf Dwjx Aa Rslf - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis

Condition: new, Year of construction: 2025, functionality: fully functional, With a grinding diameter of 200mm x 300mm long, the JHP-2003CNC is the most compact plunge type grinding machine in the range and utilises the FANUC Oi-TF CNC control. Designed for heavier grinding applications, the JHP-2003CNC can accomadate workholding and components to 80kgs. This fully enclosed machine is supplied with Renishaw probing, full machine enclosure and mist collector. Jainnher CNC Plunge Cylindrical Grinding Machine Description: JHP-2003 CNC Capacity Max ø work swing 200mm dia Max grinding length 300mm Max grinding dia. 200mm dia Max workpiece weight 80 kgs Distance between centres 300mm Centre height 100mm Grinding wheel Grinding wheel size Ø405 x 50 x 127 Max peripheral 33 m/sec Wheel speed 1780rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 220mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Hydrodynamic pressure ----- Tailstock Retraction of sleeve 30mm Sleeve diameter D:48mm Centre taper MT.3 Nlsdpfx Aaenxk N Se Rsf Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT3 Spindle type Cartridge type Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +10º/-3º Rapid traverse speed 8mm/min Max. travel 640mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 5HP 4P(opt. 7.5HP) 4P Workhead motor 1.0KW Work table (Z axis) 1.2KW Work table (X axis) 1.2KW Hydraulic pump 1/4 HP 4P Wheel head pump ----- Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 30L Wheel head lubrication ----- Coolant tank 80L Machine N.W (Fully enclosed) 3800 kg G.W (Fully enclosed) 4100 kg Dimension (Fully enclosed) 3300 x 2100 x 2200mm Packing (Fully enclosed) 3500 x 2200 x 2200mm Jainnher CNC Plunge Cylindrical Grinding Machine Standard Accessories: JAINNHER JHP-2003CNC X-axis linear scale Work lamp Foot pedal Angle adjustment gauge Hydraulic tailstock with manual movement Grinding wheel and flange Tungsten carbide tipped centres (MT3) Automatic lubrication system Diamond dresser at lower worktable Magnetic separator MC-40/coolant tank/pump Levelling bolts and blocks Tool kits and toolbox Fully enclosed splash guard & oil mist device Touch probe gauge (Renishaw) Transformer

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Special scroll bending tool ATAR 305 Spiral bending device ATSC Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on Nsdpfot Akxaox Aa Relf display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions

Operating hours: 240 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: MSB14, Machine fully disassembled and overhauled with new and original GEA-Westfalia spare parts. During the overhaul, the bevel gear set, among other components, was replaced with new and original parts, and the frame was oven-painted. Hydraulic capacity: Up to 8,000/9,000 l/h Effective capacity: between 500/1,000 l/h, as measured during testing with your processed product; capacity may vary considerably depending on the percentage of solid residues present in the product to be treated. Technical specifications: - 7.5 kW electric motor – 380V/3ph – 50Hz - Drum volume: 6.9 l – sludge chamber: 3.9 l Nedpfexvrfnjx Aa Rslf - Drum speed: 7,500 rpm The machine is sold complete with the following accessories: - Set of special wrenches for drum disassembly - New electric panel with 11 kW inverter-controlled power section and PLC-operated discharge control section, inside stainless steel housing The inverter enables smoother operation and significantly reduces power consumption and maintenance\. - New operating water unit with 20 l stainless steel tank, complete with float and stainless steel pump, to ensure consistent flushing - Flow indicator - The machine is mounted on a heavy-duty base with four M20 anti-vibration mounts in square profile steel.

Condition: used, mileage: 423,423 km, power: 120 kW (163.15 HP), first registration: 06/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ? Mercedes Benz Sprinter 316 ? 1st owner? Air conditioning ? Engine and clutch NEW at 329,000 km ? Current engine has only 94,000 km!! ? Mercedes invoices available ? 3 seats ? Thermo-King V200Max ? Driving and parking cooling ? Box interior dimensions: L: 3.40m..W: 1.85m..H: 1.90m Nljdpfx Aaszui Abo Rsf ? Tires 85% ? Euro6d Special equipment: 1 DIN slot in front, below the dashboard, passenger side, battery disconnect switch 1-pole, passenger-optimized gear selector console (without storage compartment, center console, right), chassis: stabilization level II, inductive charging tray for smartphone (wireless charging), folding cover for storage compartment, terminal block for electrical connections (driver's seat box), fuel filter with water separator, front engine drive with carrier for additional coolant compressor, multimedia system MBUX (touchscreen 7"), hands-free system Bluetooth, steering wheel with multi-function buttons, smoker's package, spare wheel holder under the end of the frame including jack, mud flaps front, seats in the cab: passenger double seat, seats in the cab: driver's seat comfort, USB socket in the center below the dashboard (charging function only), rear wall paneling, fleece battery 92 Ah, front axle reinforced, jack Additional equipment: Storage compartment above the windshield, towing eye rear, adaptive brake light, airbag driver side, traction control system (ASR), indicator for washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature gauge, headlining in the cab, automatic headlight activation, electronic brake-force distribution (EBV), body/structure: standard platform body, communication module (LTE) for digital services, fuel tank: main tank 71 liters, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck approval, side marker lights, Mercedes-Benz emergency call system, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, low emission according to emission standard Euro 6, safety belt system with warning system (driver side), seat cover / upholstery: fabric, service interval display Assyst, heat protection glazing, permissible total weight 3.50 t

Condition: used, mileage: 548,684 km, power: 105 kW (142.76 HP), first registration: 08/2016, fuel type: diesel, next inspection (TÜV): 08/2028, color: white, gearing type: automatic, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €9,900 net * Mercedes-Benz Sprinter 314 Cdi BlueTEC L2H2, 9 seats, wheelchair lift, air conditioning, Euro 6 * Seats (8+1) * Innotrans conversion * Automatic transmission * Radio/CD player * Driver's airbag * USB port * Electric windows * Electric mirrors * Central locking * Automatic climate control * Start/Stop system * Hands-free system * Adjustable backrests * Air-suspended driver's seat * ABS * ESP * 2 wheelchair spaces * Wheelchair lift, 400 kg capacity * Wheelbase 367 cm * Unladen weight 2784 kg * Payload 716 kg * Permissible total weight 3500 kg * Passenger car registration * Vehicle no. 15 OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) CONTACT INFORMATION Njdszui D Ejpfx Aa Rolf Telephone: WhatsApp E-mail: Delivery and customs registration plates (export number) available from us. Errors, typos and prior sale excepted. Technical specifications and equipment features must be checked separately. The condition as per the contract is only valid if it has been inspected on-site at the time of purchase and confirmed in writing. Please arrange an appointment...

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm • Maximum tool weight 7.5 kg Nledpfx Aaszugwpe Rsf • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: used, mileage: 69,990 km, power: 75 kW (101.97 HP), first registration: 03/2022, fuel type: diesel, wheelbase: 2,785 mm, color: white, number of seats: 2, loading space volume: 1.9 m³, loading space length: 1,550 mm, loading space width: 1,100 mm, loading space height: 1,080 mm, construction height: 1,796 mm, working width: 2,107 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, sliding door, soot filter, traction control, Air conditioning, central locking with remote control, electric windows, cruise control, speed limiter, front and rear parking sensors, cargo area partition with window, windshield wipers with rain sensor, driver assistance system: high beam assistant (automatic headlight control - AHB), daytime running lights, fog lights, radio, Bluetooth, hands-free system, tire pressure monitoring system, driver airbag, airbag driver/passenger side, front side airbags, anti-lock braking system (ABS), electronic stability program with traction control (VSC with TRC), diesel particulate filter, sliding door passenger/cargo area right, driver assistance system: blind spot monitoring (BLIS), power steering, paint: white, Zanotti cooling unit Z200, 230V power supply, driver assistance system: Toyota Connect safety system with automatic emergency call (eCall), individual passenger seat, rear window wiper, electronic brake force distribution, brake assist, electric parking brake (EPB), driver assistance system: downhill assist control (HDC / DAC), driver assistance system: hill start assist control (HAC), stop & go system (TSGS), body/structure: van, drive type: front-wheel drive, wheelbase 2785 mm, 6-speed transmission Financing example * Cash price: 22,372.00 Euro * Down payment: 4,474.00 Euro * Term: 60 months * Net loan amount: 17,898.00 Euro * Effective annual interest rate: 6.49% Nljdeztyiiopfx Aa Rsf * Nominal interest rate (fixed) p.a.: 6.30% * Gross loan amount: 20,913.00 Euro * Monthly payment: 349.00 Euro *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for whom the car dealership acts as a loan intermediary in an advisory capacity. Creditworthiness required. The information also corresponds to the 2/3 example according to § 6a para. 3 PAngV. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. The listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle. Retrofitting of: - Towing couplings, also up to 3500 kg - Auxiliary heaters - Screen for reversing camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear camera - Workshop equipment - Cruise control - Retrofitting of a tail lift (LBW) and other individual solutions for your business needs possible for an extra charge.

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, E-scrap processing plant with hammer mill, magnet, and re-separation system Feed conveyor Erdwich HA800 hammer mill Soundproof enclosure Knock-off belt THM Overband magnet ERIES Elevator belt Vibrating feeder for re-separation Re-separator IMRO Nedpfx Asztp D Asa Rjlf Frames Control cabinet Additional rotor for hammer mill, in new condition Additional spare parts for hammer mill

Condition: good (used), clear span: 2,700 mm, total length: 22,365 mm, load per truss pair (max.): 1,500 kg, shelf height: 2,200 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 22,365 mm Number of bays per racking row: 08 units, each 2,700 mm Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per bay: 09 units Nlodpfx Ajzupaysa Ref Number of pallet spaces per row: 72 units Total number of pallet spaces: 72 units Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 500 kg Included in the scope of supply: 09x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,200 mm high 1,100 mm deep 32x Pallet racking beams, used Material color: yellow Beam type: HN85|20 Box profile: 85 x 50 mm Connector: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 64x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 36x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm Nljdjy R S E Hepfx Aa Rsf -Outlet opening: Ø 390 mm -Note: filter unit only, without extraction fan -Quantity: 1 piece available -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: used, mileage: 284,157 km, power: 62 kW (84.30 HP), first registration: 04/2017, fuel type: diesel, next inspection (TÜV): 08/2028, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * 12,900 EUR net * Volkswagen T6 Kombi 2.0 Tdi L1H1, 9 seats, air conditioning, sliding door, Euro 6 Nodjzurgcopfx Aa Relf * Seats: 9 (3+3+3) * 5-speed * Front airbags * Armrest * Electric windows * Electric mirrors * Central locking * Cruise control * Alloy wheels * Isofix * Air conditioning * ABS * ASR * Radio/CD player * Daytime running lights * Start/Stop system * Tire pressure monitoring * Fog lights * Rear parking sensors (PDC) * Sliding door on the right * Wheelbase 300 cm * Unladen weight 1738 kg * Payload 1262 kg * Permissible total weight 3000 kg * Passenger car registration * Vehicle no. 29 Timing belt replaced at: 3,714 km OPENING HOURS Monday - Friday from 09:00 - 17:00 (by appointment...) CONTACT INFORMATION Phone: WhatsApp E-mail: Transit and customs license plates (export number) available from us. Errors, typos and prior sale excepted. Technical specifications and equipment features must be checked separately. The condition as per the contract is only what has been inspected and confirmed in writing at the time of purchase. Please make an appointment...

Condition: used, overall weight: 16,000 kg, first registration: 01/1999, loading space length: 5,394 mm, loading space width: 2,489 mm, loading space height: 2,576 mm, Year of construction: 1999, Equipment: crane, GLEICH VEHICLE CONSTRUCTION PR.+PL. ? ATLAS AK 190.1 ? 16.3M CRANE? ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST 2 UNITS AVAILABLE / 1 WITH FASSI CRANE / 1 WITH ATLAS CRANE ----VEHICLE EQUIPMENT ----VEHICLE DATA GROSS VEHICLE WEIGHT: 16,000 KG OVERALL LENGTH: 7,450 MM ----CRANE PLATFORM MOUNTING POINTS: APPROX. 5.86 M ----CRANE SUPERSTRUCTURE ATLAS CRANE MODEL: AK 190.1 A4 YEAR OF MANUFACTURE: 1999 MAXIMUM WORKING PRESSURE: 300 BAR MAXIMUM LIFTING CAPACITY AT 2.2 M OUTREACH: APPROX. 6,550 TO 7,400 KG MAXIMUM OUTREACH: 16.3 M WITH APPROX. 710 TO 770 KG LIFTING CAPACITY CRANE OPERATED VIA SEPARATE DIESEL ENGINE ----BODY FLATBED WITH CURTAIN SIDE MANUFACTURER: Gleich Fahrzeugbau GmbH FLOOR MADE OF APPROX. 30 MM WATERPROOF BONDED FILM FACED PLYWOOD SIDE PANEL HEIGHT: 800 MM SIDE WALLS FOLDABLE AND REMOVABLE FIXED FRONT WALL REAR WITH DOUBLE DOORS AND BAR LOCKING MECHANISM LASHING POINTS INTEGRATED INTO EDGE PROFILE SUBFRAME MADE OF STEEL, AUXILIARY FRAME ACCORDING TO DIN EN 283 284 Nledpfx Aajx S Tmno Rjf ----TARP/CURTAIN ROOF COLOUR APPROX. RAL 9010 SLIDING CURTAIN LIGHT GREY SLIDING ROOF, SIDEWAYS OPENING FRONT AND REAR ----INTERNAL DIMENSIONS LENGTH: 5.4 M HEIGHT: 2.57 M WIDTH: 2.49 M ----CONDITION UVV INSPECTION OF LOADING CRANE PERFORMED NO SAFETY-RELATED DEFECTS FOUND CRANE FULLY FUNCTIONAL CRANE REMOTE CONTROL AVAILABLE ----EXPORT SALES ONLY WITH DEPOSIT (MINIMUM 500 – 2000 €) EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 € CUSTOMS EXPORT CLEARANCE (EXW) WITHIN 10 MIN. (APPROVED EXPORTER) 5-DAY, 30-DAY PLATES, AND 17–21 DAYS AUSTRIAN PLATES, EURO 1 VEHICLE RESERVATIONS ONLY VIA E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least 500.00 € / 1,000.00 € is required for sales to EU or third countries. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied.) Subject to changes, errors, and prior sale! See more vehicles on our homepage: Sale is exclusively subject to our terms and conditions – see homepage. Important note – Important information: Despite careful verification of all details in our listing, errors may occur. Some of these may be due to transmission errors in the systems of the various platform providers. Therefore, all specifications are made without guarantee and do not represent legally binding characteristics. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information provided for the initiation of a contract. All details are given without guarantee and do not constitute warranted characteristics.

Condition: used, mileage: 144,597 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 2,160 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Equipment: Body/Superstructure: Refrigerated van, * Fresh food transport equipment * Company Hahlbrock * Convekta refrigeration system, Features: * Air conditioning, * Rear tailgate doors, * Trailer coupling 1,500 kg Technology: * Audio system Composition Media, * Bluetooth hands-free system, * Electrical package 2, * Electric exterior mirrors * Central locking with remote control, * Multifunction display Plus, Safety/Environment: * Airbag driver/passenger side, * Side airbags in the front with head airbag unit, * Driver fatigue detection sensor, * Electronic differential lock (EDS), * Driving assistance system: Hill start assist, * Driving assistance system: Multi-collision brake, * Low emissions according to exhaust standard Euro 6, * Equipment package: BlueMotion Technology, Other: German initial registration, * 1 previous owner, * Engine 2.0 L - 110 kW TDI, * Wheelbase 2682 mm, * Truck registration, * Certificate of Conformity (COC) available, Nlsdozt T Nvopfx Aa Ref Since 1972, we have been your reliable partner for all things automotive/commercial vehicles in 28832 Achim, near Bremen. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer attractive financing options with favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machinery as a trade-in. If a new TÜV (German technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally without a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the Internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. Listed features may need to be verified separately. Errors and prior sale excepted.

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Nlsdpfx Aswdutmoa Ref Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: used, mileage: 2,500 km, power: 118 kW (160.44 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 2,920 kg, maximum load weight: 580 kg, overall weight: 3,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 4, total length: 7,425 mm, number of beds: 4, Equipment: ABS, air conditioning, airbag, bathroom, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, second-hand vehicle warranty, soot filter, traction control, Highlights: Line Design, Accent Design, Maxi “Carbon Optic” radiator grille with chrome accents, 16-inch alloy wheels, Shadow seat covers (fabric, anthracite), Grand Cru No7 backrest, Walnut-colored overhead locker flaps, matte white kitchen fronts, Petrol-colored rear wall paneling, Comfort Package: Comfortable seats for driver and passenger, adjustable in inclination and height, upholstered in fabric, Panoramic skylight (Medi-Heki) above the living area, Acoustic paneling on the side walls, Fly screen sliding door for the entrance door, Intuitive lighting concept (motion and light sensors), Comfort mattress incl. Lattoflex sleeping system for the rear bed, Driving Comfort Package: Leather steering wheel and gear knob, Steering wheel with controls for the radio, Wireless phone charger, Digital cockpit, Multimedia package (without satellite system), Navigation system with 7-inch touchscreen incl. tuner with DAB+, Bluetooth, Radio preparation “Basic”, consisting of four speakers incl. antenna FM/DAB+, Rear-view camera behind the Fiat emblem, Smart LED TV 32 inches incl. triple tuner, Bluetooth 4.2, Premium Package: Kitchen unit, Gastro Norm container for compressor refrigerator drawer, Compressor refrigerator drawer 138L incl. separate freezer compartment 12L and electric central locking, Extendable kitchen countertop thanks to pull-out system, Mineral material surface in the kitchen, Electric kitchen lift with indirect lighting and 230V socket, Fiat Ducato light 3.5t, 160 hp, ZF AT9 automatic transmission, Fog lights in LED, Electrically adjustable and heated exterior mirrors, painted in vehicle color, Automatic climate control with pollen filter, Start-Stop system, Cruise control, Additional garage door on the driver's side, Extendable storage box on the driver's side, Folding bed manually with comfort mattress and slatted base, Sofa on the driver's side convertible into an L-shaped bench (4 seat belts total) incl. folding table top and sliding table thanks to floor rail system, Gas exterior connection Truma DuoControl CS, Outdoor shower in the garage, SOG toilet ventilation, 230V socket in the garage, Central locking for the entrance and garage door. Nledpfx Aezt Smtsa Ref