Used Nko Anfassystem B22 Zero for sale (1,027)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Rjdpfouxfu Nex Alajcf Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes Rsdpfxsvn N Hdo Alascf >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Condition: good (used), Air cooler, evaporator, cold storage, refrigerated container, cold room -Area of application: for connection to a cooling system Rcodob Nx Hlspfx Alaof -Fan diameter: 500 mm -Maximum permissible operating pressure: 8 bar -Permissible operating temperature: 100 °C -Pressure at sub-zero temperatures: 21 bar / -60 °C -Contents: 13.2 liters -Slat spacing: 7 mm -Number: 2x coolers available -Price: per piece -Dimensions: 1350/740/H700 mm -Weight: 174 kg/piece

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Redpfjbatamox Alajcf Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis Rsdpfol Ikzgsx Alaecf * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame Rcsdpfxju Dg D Ao Alaof - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest Rcedpfxed Hkuce Alaof

Condition: new, The Sany SY35U zero-tail swing excavator is particularly well-suited for use in confined spaces. Its robust design and excellent performance specifications make this machine ideal for all earthmoving and road construction projects. Rcodpfx Asgi Rmcslaef - Adjustable operator seat - Multi-language display and radio - Air conditioning - Boom: standard 1400mm - Optional 1650 mm - 2x LED work lights on the cab - 1x LED work light on the boom - Hose burst valves - Battery main switch - Engine emergency stop switch

Condition: new, functionality: fully functional, mileage: 108 km, power: 117.68 kW (160.00 HP), first registration: 07/2024, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,750 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, onboard computer, 🇮🇹 IVECO DAILY 35-160 Model year 2024 BRAND NEW FROM FACTORY READY FOR IMMEDIATE DELIVERY Configuration: Fixed flatbed 4.12 x 2.07 m, sideboards height 40 cm Engine: 3.0L, 160 HP Zero kilometers 6-speed manual transmission Wheelbase: 3750 mm Twin rear wheels Multi-leaf spring suspension (quad-leaf) Semi-elliptical spring + additional leaf Digital BLUETOOTH (DAB) radio Air conditioning / electric windows Digital comfort instrument cluster Detachable spare wheel support USB charging port Redpfx Alst Sad Dsaecf WE ARE ALSO OFFICIAL MERCEDES-BENZ DEALERS AT OTHER LOCATIONS DOMENICO TRUCK SRL, NAPLES (NA) DOMENICO ESPOSITO S.P.A., EBOLI (SA) OFFICIAL DEALER FOR: FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS DOMENICO ESPOSITO S.P.A. LOCATIONS: EBOLI (SA), NAPLES (NA) - OPTION FOR CUSTOMIZED FINANCING OR LEASING ON SITE FROM 24 UP TO 96 INSTALLMENTS ZERO DOWN PAYMENT PHONE: - 0823 1686306 - 335 6713062 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL AND INDUSTRIAL VEHICLES (FIAT, HYUNDAI, DAF, MERCEDES-BENZ, RENAULT, PEUGEOT, IVECO, MITSUBISHI, SCANIA S-WAY, 5500, V8, 650, 580, 730, S500, S 500, S500 Stralis, MAN, NISSAN V8, Intarder, 770S Limited Edition, 660S, semitrailer, refrigerated trailer, Lamberet, Schmitz, ISUZU, FLATBED, CRANE, TIPPER, CURTAIN-SIDER, BOX BODY, TAIL LIFT, FRIDGE CELL, INSULATED WITH REFRIGERATION UNIT, VAN).

Condition: like new (used), functionality: fully functional, mileage: 359,266 km, first registration: 05/2022, fuel type: diesel, fuel: diesel, brakes: intarder, color: red, gearing type: automatic, suspension: air, Equipment: ABS, Bluetooth, navigation system, onboard computer, parking air conditioner, Iveco Stralis S-Way 530 - Registered: 2022 - Full air suspension - Retarder: Intarder Rcodpfx Aozlyxzslajf - Mileage: 359,266 km - Stationary air conditioning - Double bunk - Heated seats WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - S500 - S 500 - S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer - Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-sided - V8 - Scania - Frost Edition - Tautliner - Box - Tail lift - Reefer cell - Insulated with reefer - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional features, and characteristics, which may differ from the specifications stated in the description in some cases. We invite you to verify the characteristics of the specific vehicle.

Condition: like new (used), functionality: fully functional, mileage: 181,572 km, first registration: 03/2024, fuel type: diesel, fuel: diesel, brakes: intarder, color: red, gearing type: automatic, suspension: air, Equipment: ABS, Bluetooth, navigation system, onboard computer, parking air conditioner, Iveco Stralis S-Way 530 - Registered: 03/2024 - Full air suspension - Retarder: Intarder - Mileage: 181,572 km - Stationary air conditioning - Double bunk - Heated seats WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS Rcodpfjzly Hrex Alaof CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540- 460 hp - Xway-X-Way-Three-sided - V8 - Scania - Frost Edition - Box body - Drop-side - Refrigerated cell - Insulated with refrigerator - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional equipment, and features, which may differ in some cases from those stated in the description. We invite you to verify the specifications of the specific vehicle.

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, Redpfxsxbgrgj Alaocf • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2013, operating hours: 906 h, fuel type: electric, Year of manufacture: 2013 Drive: Wheel GVW: 6.700 kg Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm CE mark: yes Technical condition: good Visual appearance: good Manitou 150 AETJ-C – Year 2013 | Only 906 Operating Hours | Electric Articulating Boom Lift For sale: a very well-maintained Manitou 150 AETJ-C from 2013 with only 906 operating hours. This fully electric articulating boom lift is ideal for warehouses, production facilities, distribution centres, shopping centres and industrial applications where quiet, zero-emission operation is required. With a working height of approximately 15 metres and a horizontal outreach of approximately 7.6 metres, the 150 AETJ-C offers excellent performance and outstanding versatility for working at height. Its compact dimensions, non-marking tyres and electric drive system make it ideal for both indoor and outdoor use on solid surfaces. The machine is in excellent condition, has exceptionally low operating hours and is ready for immediate use. Key Features: Year: 2013 Only 906 operating hours Working height: approx. 15 m Horizontal outreach: approx. 7.6 m Fully electric drive system Quiet, zero-emission operation Compact and highly manoeuvrable Rcodpfozmmiiex Alaof Non-marking tyres Excellent condition Ready for immediate use A reliable and versatile electric articulating boom lift with exceptionally low operating hours.

Condition: like new (used), functionality: fully functional, mileage: 410,202 km, first registration: 01/2024, fuel type: diesel, fuel: diesel, brakes: retarder, color: grey, gearing type: automatic, Equipment: ABS, Bluetooth, additional headlights, onboard computer, parking air conditioner, SCANIA 660 S V8 Rjdozmit Rjpfx Alascf First registered: 01/2024 Mileage: 410,202 km Full air suspension Retarder Alloy wheels Auxiliary climate control Navigation system V8 leather interior WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-sided - V8 - Scania - Frost Edition - Tautliner - Box - Tail lift - Reefer Cell - Insulated with Reefer - Van Domenico Truck srl is not responsible for any discrepancies in technical specifications, optional equipment, and features that may differ from the details described. We invite you to verify the specifications of the specific vehicle.

Condition: used, functionality: fully functional, mileage: 487,338 km, first registration: 10/2019, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, Bluetooth, additional headlights, lane keeping assist, onboard computer, parking air conditioner, SCANIA 650 S V8 Year: 2019 Mileage: 487,338 km Full air suspension Retarder Alloy wheels Auxiliary air conditioning Navigation system Rcedozmiubopfx Alaef V8 leather interior WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED COMMERCIAL/INDUSTRIAL VEHICLES FROM VARIOUS BRANDS: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540- 460 hp - Xway-X-Way-Three-way tipper - V8 - Scania - Frost Edition Tarp - Box - Tail lift - Reefer cell - Insulated with reefer - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional equipment, and features that may differ from the details provided in the description. We invite you to verify the specifications of the specific vehicle.

Condition: used, functionality: fully functional, mileage: 253,929 km, first registration: 01/2022, fuel type: diesel, fuel: diesel, brakes: intarder, color: white, gearing type: automatic, Equipment: ABS, AdBlue, Bluetooth, airbag, onboard computer, Iveco Stralis S-Way 570 -Full air suspension -Registered in 2022 -Retarder: Intarder -253,929 km -Auxiliary air conditioning system -Double bunk *Vehicle price excludes VAT. WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS Rsdpezidbujfx Alajcf DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED COMMERCIAL/INDUSTRIAL VEHICLES FROM VARIOUS BRANDS: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - S500 - S 500 - S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer - Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-sided - V8 - Scania - Frost Edition - Tarp - Box - Tail lift - Refrigerated cell - Insulated with refrigeration - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional equipment, and features, which may differ from the details described in some cases. We invite you to verify the specifications of the specific vehicle.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, power: 4.5 kW (6.12 HP), load capacity: 320 kg, lifting height: 11,800 mm, lifting power: 320 kg/m, platform length: 2,280 mm, platform width: 1,120 mm, overall weight: 3,150 kg, transport length: 2,477 mm, transport width: 1,190 mm, transport height: 2,610 mm, fuel type: electric, tire size: 381 x 127, tire condition: 100 %, wheelbase: 1,877 mm, color: red, === KEY SPECIFICATIONS === Year of manufacture: 2024 Hours: 1 Condition: New / unused stock machine Machine width: 1.19 m Drive system: Electric, 2 front driving wheels Driveable at full height: Yes Extendable platform: Yes Power: 4.5 kW lift motor / 0.87 kW drive motor Working height: 13.8 m Platform height: 11.8 m Platform capacity: 320 kg Drive type: Electric Battery type: Lead-acid Self-levelling outriggers: No Platform dimensions (L x W): 2.28 x 1.12 m Extension platform: 0.90 m Tyre type: Non-marking solid tyres CE certification: Yes Weight: 3,150 kg Indoor / Outdoor use: Both === HIGHLIGHTS === New electric scissor lift with only 1 operating hour Year of manufacture 2024 Energy-efficient electric drive with zero emissions and low noise Compact 1.19 m machine width for narrow working areas Extendable platform for extra working reach Non-marking solid tyres, suitable for indoor use Mobile pothole protection system CE certification and full documentation included Ready for immediate transport and use === CONDITION === New machine with only 1 operating hour. Clean, original condition with fully tested systems. Battery, drive and lift functions checked. Rsdpfx Alezixw Roaecf Directly available from stock in Sittard. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). The XCMG XG1412AC is a compact electric scissor lift with a working height of 13.8 m and a platform capacity of 320 kg. Thanks to its electric drive, low noise level and non-marking solid tyres, this machine is ideal for indoor construction, maintenance, warehouses, factories, shopping centres and other sensitive working environments. With its 1.19 m machine width, extendable platform and mobile pothole protection system, the XG1412AC offers safe and efficient access at height while remaining easy to manoeuvre in narrow areas. All machines are inspected, CE-certified and ready for immediate use. Professional support, transport and export documentation are available on request. === DELIVERY === Worldwide delivery possible. Flexible transport options available depending on destination. All transport can be professionally arranged by Collé Rental & Sales.

Condition: excellent (used), functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, maximum load weight: 48,800 kg, lifting height: 18,000 mm, Year of construction: 2012, Fuchs Terex RHL860D – Electric Material Handling / Loading Equipment We offer this excellent-condition, ready-to-work Fuchs Terex unit. Manufacturer: Fuchs Terex Model: RHL860D Year of Manufacture: 2012 Condition: Very good This machine is fully electric driven, offering significant operational and environmental advantages: Key Advantages of Electric Drive: Zero CO₂ emissions Low noise levels with high-torque electric motors Rcjdpsyf Nnyefx Alaof Minimal heat generation Future-proof drive technology Low maintenance and operating costs Comprehensive monitoring of power supply quality and machine grounding Designed for 24/7 operation Large working radius, expandable with optional cable drums or power packs An ideal solution for efficient, sustainable, and continuous material handling operations. Shipping assistance available from the Port of HaminaKotka, Finland. An electric excavator is well suited for this type of application, where the need for relocation is minimal. When necessary, the machine can be driven to the maintenance hall using a dedicated power cable. Compared to an internal combustion engine, the electric motor is largely maintenance-free. Another major advantage of electric power is that fuel does not gel even in severe cold conditions. During cold periods, the hydraulic system is kept continuously running, ensuring that the hydraulic oils remain warm. The Terex Fuchs contains 700 liters of hydraulic oil, and oil change intervals are determined through oil sample analysis. A significant reduction in operating costs is achieved through electric operation, which is considerably cheaper than diesel. The power supply comes from the factory network at 690 volts, which is stepped down on the machine to the Terex Fuchs operating voltage of 400 volts. The electric motor driving the hydraulics has an output of 160 kW. The pump delivers nearly 500 liters per minute at a pressure of 360 bar. Power to the pump is supplied according to the oil demand of the hydraulic consumers, which reduces overall power requirements.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 1,642 mm, total height: 2,055 mm, total width: 3,594 mm, input voltage: 220 V, overall weight: 1,834 kg, compressed air connection: 6 bar, warranty duration: 12 months, working height: 850 mm, Equipment: documentation/manual, EDDA NEOBOX Series | High-Performance Intelligent CNC Cardboard Box Making Machine The NEOBOX Series is a state-of-the-art, fully automatic CNC cardboard box cutting and creasing machine engineered to deliver just-in-time, made-to-measure packaging solutions. Featuring industry-leading automation, premium components, and an intelligent zero-waste design, it eliminates standard packaging inventory costs and optimizes cardboard consumption. Next-Generation CNC Control & Advanced CAD/CAM Software: Elite Italian TPA CNC Controller: Powered by a Windows-based industrial OS and driven by the prestigious Italian TPA CNC system, backed by 40 years of specialized cardboard software expertise. Free Integrated CAD/CAM Software: Supplied with an advanced, complimentary CAD/CAM suite, allowing customers to design unlimited custom boxes without restriction. 50+ Pre-loaded FEFCO Codes: Over 50 standard FEFCO packaging designs come pre-programmed and ready to manufacture instantly. One-Click Macro Operation: Custom layouts can be saved as macros. An unskilled operator can easily run the machine simply by selecting the template and entering 3 dimensions (Length, Width, Height) and the desired quantity. Redoy Iby Ispfx Alajcf Smart Production & Advanced Waste Reduction: Dual-Zone Stock Feeding: Equipped with left and right working zones, accommodating two different cardboard sheet widths simultaneously. The machine automatically selects the best width to minimize waste. Automatic 90° Orientation: The intelligent software automatically rotates the box layout 90 degrees if it results in lower material waste. C-Suite Multi-Magazine Upgrade (Optional): Can be retrofitted with the "C-Suite" system holding up to 10 fanfold cardboard magazines of varying widths, slashing material waste down to a minimal 2% to 3%. Side-by-Side Multi-Production: Configured to process 2 or 3 narrow cardboard sheets simultaneously (depending on blade setup), multiplying production output by 2x to 3x. High Speed, Premium Components & Smart Industry 4.0 Integration: Outstanding Output: Delivers high-speed cutting and creasing, producing between 2 to 10 boxes per minute (depending on box complexity and dimensions). World-Class Hardware: Fully integrated with ultra-reliable Panasonic servo motors & drives, alongside premium SMC or Festo pneumatic systems. Seamless ERP & Smart Scanning Integration: Features XML-format data structure for full integration into user ERP systems for continuous, fully automated, operatorless inline workflow with real-time ERP feedback. Barcode & QR Code Automation: Connects via wired or wireless barcode/QR scanners to automatically generate custom boxes on-demand, completely removing operator error. Remote Office Planning & Control: Fully operational from the central planning office via integrated remote desktop software. Integrated Intelligent Printing (Optional): Optional label printer integration for automated batch, single, header, or footer labeling. Scalable Blade Tooling: Standard configuration begins with 7 vertical blades and is customizable up to 16 blades for advanced, complex packaging designs. For specific engineering inquiries, customized configuration proposals, or an interactive video demonstration, please submit an inquiry form directly via Machineseeker.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, operating hours: 10,000 h, machine/vehicle number: 3936990, Equipment: all wheel drive, compressor, emergency stop, hydraulics, Complete MacFab Wet-Cast Concrete Panel Production Line and 29 steel moulds. Rcsdpfx Aszndccolaof Comprehensive Mould Package for the production of concrete sectional garages. Alternatively the moulds could be altered to produce products in a variety of sizes, shapes, textures and colours. Excellent / In Perfect Working order In daily operational use. Available for live operational viewings. Location: United Kingdom Terms: Ex Works (EXW) – Buyer to arrange decommissioning and transport. Overview, An exceptional opportunity to acquire a complete, turnkey precast concrete panel manufacturing setup from industry-leading manufacturer MacFab. This system is not sitting in storage; it is currently in day-to-day production, meticulously maintained, and performing to perfect operational standards. Ideal for an established precast yard looking to rapidly scale capacity, or an agricultural/civil contractor looking to bring high-volume panel manufacturing in-house without the long lead times of ordering new plant equipment. Fully operational hydraulic systems, premium vibration consolidation setup, and robust chassis engineering. Regularly serviced and completely reliable. 29 Heavy-Duty Steel Moulds Included: A massive inventory of robust commercial steel panel moulds engineered for high-cycle wet-cast production. Excellent face-side finish quality and squareness. Complete Turnkey Solution: Includes all necessary integrated controls and ancillaries to begin pouring immediately upon reassembly Zero Operational Risk: Buy with 100% confidence. Because the machine is in active use, buyers can verify hydraulic integrity, vibration consistency, and overall cycle efficiency first-hand. Massive Mould 29 commercial steel moulds independently represents substantial capital expense and manufacturing lead time. This package provides immediate scaling capability. Live Video / Inspections Available: Serious buyers are invited to visit the facility to see the machinery running in real-time. PRICE £59950.00 Plus VAT 70270 Euros (Open to sensible offers for a swift transaction) Sold Ex Works (EXW).

Condition: used, Year of construction: 1996, Second-hand machine Year of manufacture: 1996 Features and technical specifications: - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Redpfx Alezk Nnpeaocf Availability: by arrangement Storage location: 63934 Röllbach

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Bradshaw PT1500 Electric Industrial Tow Tractor – 15 t | 48V | 2016 Professional electric industrial tow tractor by Bradshaw, model PT1500, designed for internal transport of trailers, trolleys, and load platforms in manufacturing plants, warehouses, and logistics centers. Manufactured in 2016, equipped with a 48V drive system, the machine ensures quiet, emission-free operation in enclosed environments. The listed price is net. Rcodpfey Akatjx Alasf Technical Specifications Manufacturer: Bradshaw Model: PT1500 Year of manufacture: 2016 Towing capacity: 15,000 kg Power supply: 48 V Unladen weight (without battery): 1,595 kg Total weight: 2,125 kg Battery unit weight: approx. 530 kg Maximum battery weight: 600 kg Hour meter: 2,879 h Features 48V electric traction drive Suitable for in-plant operations Tow hitch with pneumatic installation Control panel with forward/reverse drive function Emergency STOP button Low operating costs Quiet operation – zero emissions Applications Transport of industrial trailers Internal logistics Assembly lines Manufacturing plants Warehouses and distribution centers PT1500 Model Advantages Towing capacity up to 15 tons Compact, low-profile design Electric drive – ideal for production halls Proven industrial brand Ready for operation

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 220 V, Equipment: auto duplex, brochure finisher, RISO COMCOLOR 3110 (A4) 90ppm with Small Finisher (FDS) and Scanner. It is on a very good condition . Only 606.000 color print and 1.730K black. Print heads has no lines , it comes from a general maintained. Inks are about 50-60%. General: - The device is excellent, in full working function. All its systems and print head are working perfect. No lines. - A general technical service take place few weeks ago. - we can ship it worldwide, after secure its systems inside and store it on a 2 standard europallets 80cm X 120cm. - For EU countries we can issue zero VAT invoice. Please ask for quotation. - For non EU countries please ask for quotation. For any other information, you also can contact us. Rjdpfx Aljxwc S Isascf

Condition: new, functionality: fully functional, fuel type: hybrid, overall weight: 55,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-75 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrated grizzly feeder, 1070x760 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 150-300 tph Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and the travel track units is highly economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-75 -Production Capacity: 150 – 300 tons per hour -Maximum Feeding: 700 mm -Crusher Type: Jaw Crusher -SIZE: 1070x760 mm -Generator: 300 kva -CSS Setting: 45 – 160 mm -Weight: 55000 tons -Dimensions: 2900x3500x14.500mm – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. Rcsdoynf Iuopfx Alaof FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, power: 3 kW (4.08 HP), fuel type: electric, color: blue, Year of construction: 2023, fuel: electricity, 🔧 Key Specifications • Year: 2023 • Operating hours: 0 h • Fuel type: Electric • Capacity: 700 kg • Max. lift height: N/A • Power: 2.64 kW (3.59 hp) • Topsnelheid (km/h): 4 km/h • Hydraulic pump flow rate: 1.5 cc/rev • Track width: 180 mm • Track tensioner: Grease • Rollers per side: 3 • Under carriage width: 758 mm • Dumper bed capacity: 0.34 m³ • Max. inclination: 15° • Track type: Rubber tracks • Battery: 48V, 120Ah, Lithium-Ion • Recharging time: 3 hours (100%) ✨ Highlights ✅ Fully electric mini dumper with a compact design for excellent maneuverability ✅ Easy to operate and eco-friendly with zero emissions ✅ Highly versatile and suitable for a variety of tasks ✅ Complete with CE certification and full documentation ⚙️ Condition Brand new, unused. Ready for immediate delivery from our Sittard stock. 🌍 Location & Delivery 📍 Located in Sittard, Netherlands 🚚 Worldwide delivery possible 💰 Price € 21.000 (excluding VAT) Reliable first-owner machines with complete service history and expert technical support. Benefit from one of the largest European stocks of new and used equipment. All machines are CE certified, and ready for immediate use. Spare parts and professional assistance available upon request. 🚚 Delivery: Rodpfjxb Stvsx Alaecf • Crane loading available on request for hassle-free handling at departure • Flexible dispatch options tailored to your destination and logistics preferences • All shipping handled professionally by Colle Rental & Sales logistics team