Used Oevermann Dp-100 for sale (24,942)

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Godpfehrmlgsx Ahtebr Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26180X.30 Serial Number blocking unit: 136 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26180X.40 Serial number empty pallet dispenser (pallet terminal): 78 Includes pallet conveying, reference-no: 26180X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. Infeed with blocking unit & turning device. The palletizer builds single rows of bundles which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26001X.30 Serial Number blocking unit: 152 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With Slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26001X.40 Includes pallet conveying, reference-no: 26001X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Color: Blue Gbjdpfx Ashrigqshter Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26027.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Godpfxjhrmk Re Ahtsbr Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26027.40 Serial number empty pallet dispenser (pallet terminal): 132 Includes pallet conveying, reference-no: 26027.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Gsdpfsd Hgutox Ahtebr Speed max 100 c/min

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Gbsdpfx Ahshrmk Uotor Product orientation at infeed palletizer (standard): straight Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26046.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26046.40 Includes pallet conveying, reference-no: 26046.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side / längs Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26150X.30 Serial Number blocking unit: 75 Infeed with flying cross (turning device) for bundles Serial Number turning device: DK 5 Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26150X.40 Serial number empty pallet dispenser (pallet terminal): 53 Includes pallet conveying, reference-no: 26150X.50 Conveying for a pallet width of 800 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Gbjdpfxohrmlcs Ahtor Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Year of construction: 1997, condition: good (used), Built in: 1997 Size: 311 x 355 mm Speed: 9.000 c/h Equipment: gathering chain & feeder: • 8 stations chain • with double feeder • 1 folder feeder stitching unit & trimmer: Gbjdpfxodym Sto Ahtor • stitching unit • 2 stitching heads • trimmer • belt delivery with counter

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: NE100230E50133, protection type (IP code): IP55, overall weight: 2,100 kg, input voltage: 400 V, belt width: 950 mm, STEINERT NE 100 220 E50 Eddy Current Separator | Non-Ferrous Metal Separator | Fully Refurbished For sale: a STEINERT eddy current / non-ferrous metal separator, type NE 100 220 E50, used for recovering non-ferrous metals (aluminum, copper, brass, etc.) from bulk material streams such as shredder residue, Zorba/shredder NE-mix, slag, or similar feedstocks. The unit has been fully refurbished – new conveyor belt, new control system – and is in excellent, ready-to-run condition (see photos). Solid steel frame base, compact footprint, available immediately. Technical data: Manufacturer: STEINERT Elektromagnetbau Type: NE 100 220 E50 Feed width: 950 mm Belt speed: 0.5–2.0 m/s (mechanically adjustable via handwheel) Belt drum drive: 2.2 kW, IP 55 (variable gearbox IP 44) Magnet system drive: 4.0 kW, IP 55 Magnet system: fixed field frequency, adjustable up to 45° Particle size range: 5–140 mm (version E5013: 5–100 mm / E5005: 25–140 mm) Rated throughput (datasheet): approx. 10 m³/h Field-tested throughput: Zorba / shredder NE-mix 20–100 mm: approx. 5–8 t/h light, loose material: approx. 3–6 t/h heavy, uniform material: approx. 8–12 t/h Protection class (overall unit): IP 55 Gbedpfxszd Srwe Ahtjr Permissible ambient temperature: -10 °C to +35 °C Total weight: approx. 2,100 kg Condition: fully refurbished – new belt, new control system

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 4,278 h, load capacity: 10,000 kg, lifting height: 5,400 mm, free lift: 1,710 mm, fuel type: diesel, mast type: triplex, construction height: 3,008 mm, fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Mast Type: Triplex Transmission: Hydrostatic Condition: Ready for use and fully functional Technical Condition: Normal Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Super Elastic Gbodpfxjv R Nmcs Ahter Rear Tires Condition: 60 - 80% Sideshift, Fork Positioner, 3rd Valve, 4th Valve

Condition: used, functionality: fully functional, mileage: 51,500 km, power: 152 kW (206.66 HP), first registration: 12/2023, fuel type: diesel, empty load weight: 2,600 kg, overall weight: 4,500 kg, axle configuration: 4x4, wheelbase: 3,450 mm, next inspection (TÜV): 02/2027, fuel: diesel, fuel tank capacity: 90 l, color: light green, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 6, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), full service history, immobilizer system, navigation system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, truck registration, DEMO OFFER / CHASSIS WITHOUT BODY!!! Additional cost for PLATFORM, net: 7,500 Euros plus statutory VAT! DE-RATING to 3,500 kg performed. UP-RATING to 4,250 kg / 4,500 kg gross vehicle weight possible. In addition to the extensive standard equipment, the following is included: SPECIAL EQUIPMENT: SEATING Comfort headrests Luxury seat for passenger with armrest and lumbar support, adjustable in height, inclination, and longitudinal direction, hydraulically sprung, heated Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination, and longitudinal direction, hydraulically sprung, heated Seat heating ELECTRICS/LIGHTING Trailer socket 12V, 13-pin Expansion module + CAN Open Automatic high beam control Light and rain sensor Switch for body lighting Full LED headlights Preparation for telematics system (telematics box) ELECTRICS/LIGHTING Additional speed limiter DRIVER CABIN EXTERIOR Additional vehicle key with remote control Mirrors for body width 2200 mm, category IV Heated windshield (Daily: in the area of the windshield wiper mounting) DRIVER CABIN INTERIOR/AUDIO Roof storage compartment above windshield Air conditioning with automatic climate control Comfort dashboard Leather steering wheel with function buttons for radio, telephone, menu navigation Steering column adjustable in height and inclination Radio HI-Connect with navigation for Europe, Bluetooth hands-free system and Godpozt Ncxjfx Ahtjbr multi-function steering wheel, compatible with Apple Car Play and Android Auto Tablet and smartphone holder with USB charging port Cruise control Auxiliary water heater CHASSIS De-rating to 4.5t gross vehicle weight in conjunction with single tires Rear underrun protection Fuel tank 90 liters, integrated ENGINE/TRANSMISSION/AXLES Eco-Smart function, not included Rear axle ratio i 4.444 Air conditioning compressor 170ccm Run-Lock function COLOR Spring Green IC 373 CONSTRUCTION AP A8 Differential lock on drive axle(s), switchable Grab handle on A-pillar for driver and passenger Interface + expansion module + CAN Open End cross member frame end Oil pan protection CONSTRUCTION AND MODIFICATIONS DESCRIPTION TS 4x4 DAILY AX 35C-50C All-Road TS 4x4 DAILY AX AIR-PRO air suspension TS 4x4 DAILY AX off-road reduction transfer case TS 4x4 DAILY AX additional cost differential lock front axle TS 4x4 DAILY AX additional cost HI-MATIC TS 4x4 DAILY AX OFF-ROAD package TS 4x4 DAILY AX OFF-ROAD Single Basic with single tires TS 4x4 DAILY additional cost 210 hp TS 4x4 DAILY OFF-ROAD tires PLATFORM in the pictures is NOT included! Additional cost for PLATFORM, net: 7,500 Euros plus statutory VAT! Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale excepted! Pictures may include optional extras that incur additional costs! Delivery date upon agreement! Inspection only by appointment! Address is only the office address, not the vehicle location!

Condition: used, Model: HOLZ-HER 100 L-2 Cutting length: 5,300 mm Cutting height: 2,100 mm Godpfszt Dy Ssx Ahtebr Power: 3 kW S1 / 4 kW S6 ED 40% Voltage: Y 380 V, 3~ 50 c/s Speed: 2840/3740/min Fully functional This saw is ideal for rough cutting. Availability: short notice Location: near Mannheim

Condition: used, Year of construction: 2001, x-travel 1000 mm y-travel 800 mm z-travel 500 mm Gbsdpoztfx Ajfx Ahter control Siemens 611

Condition: used, Haffner SL100 door lock milling machine for simultaneously: Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Drilling out the handle and keyhole using a drill bit. Gedpfeztvw Njx Ahtobr Technical data: - Chain cutter motor: 1.7 kW - Rebating cutter motor: 0.6 kW - Drill motor: 0.25 kW - Blade length: 150 mm - Chain width: 12–17 mm

Condition: ready for operation (used), Year of construction: 1977, Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Gedpfx Aeztrbkjhtsbr

Condition: good (used), Year of construction: 2012, Turning diameter: 168 mm Turning length: 145 mm Travel – x: 130 mm Travel – z: 110 mm Spindle speed: 45 – 6,000 rpm Rapid traverse X + Z axes: 18 / 24 m/min Rapid traverse X and Y axes: 24 m/min Equipment/Accessories: - CNC control FANUC 31i-TA - 2 x portal loading system - 2 x workpiece slides for inspected parts - 2 x 3-jaw chuck SMW Autoblok 6 inch, type BHM 165 - SMW Autoblok hydraulic cylinder type SIN-S 100 (left) - SMW Autoblok hydraulic cylinder type VNK 70/37 (right) - Chip conveyor (discharging to the rear of the machine) - Air-controlled workpiece positioning control (right) - Workpiece clamping monitoring (both sides) - 4-position spindle orientation (both sides) - Coolant injection in the chuck via Deublin rotary distributor (both sides) - Automatic coolant pump (tank capacity 200 l) - 2 x 8-station turret - Signal light (traffic light design) - Oil-mist extraction preparation - Automatic machine switch-off - Automatic central lubrication - RS232 C interface - External transformer Tooling: - 10 x boring bars - 3 x turning tools (right) - 3 x turning tools (left) Gjdpfx Aozt R U Aohtjbr CNC functions: - Customer macro B - Turning cycles

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Type: 2005/100 Year: 2015 Godpsznwwaefx Ahtjbr Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] Gbodpfx Ahsu E U Tbstjr - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: used, TECHNICAL DETAILS Floor space - Dimensions (length-depth-height) : 550 x 500 x 600 [mm] - Weight : 44 [Kg] Godpfxsu Su Edo Ahtobr Power supply - Voltage : 230 [V] - Supply : 50/60 [Hz]

Condition: used, TECHNICAL DETAILS Floor space - Dimensions (length-depth-height) : 550 x 500 x 600 [mm] - Weight : 48 [Kg] Gbsdpfeuhb H Rjx Ahtjr Power supply - Voltage : 230 [V] - Power supply : 50/60 [Hz]

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 61 [mm] - Max. turning diameter : 400 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6 Gsdpfjuhal Sjx Ahtobr - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 795 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 410/805 [mm] - Y stroke : 140 [mm] - B Axis stroke : 225 [°] - B axis indexing precision : 0.001 [°] - Tool type : CAT 40 - Spindle speeds : 12000 [rpm] - Spindle power : 6.6 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 LOWER TURRET - Number of positions : 9 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3075 X 2330 [mm] - Machine height : 2450 [mm] - Machine weight : 7500 [kg] MACHINE HOURS - Number of hours under power : 75434 [h] - Number of working hours : 49153 [h] EQUIPMENT - CNC : Mazatrol MATRIX - Interactive programming - 3 colors status lamp - Coolant tank * Coolant through spindle - Chips conveyor - Oil mist extractor : ELBARON - Tool probe - Tool breakage detection - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD - Electric transformer

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Gbjdpfsztmzxox Ahtor Drive: 75 kW

Condition: used, HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width (optionally as open 3- or 7-blade rotor) Godpfsztmynsx Ahtebr Drive motor 110 kw Folding device with electric winch

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Gsdpfx Ahoztmvvjtebr Stator knife rows: 2 Drive: 75 kW

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Notching die for profile steel shears, flat steel shears Godozr Hlzspfx Ahtebr -Dimensions: see photos -Dimensions: Die 240/90/H125 mm / Punch 200/85/H170 mm -Weight: 33.9 kg

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 26FT-046-01, mileage: 1,850 km, power: 129 kW (175.39 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 2,660 kg, overall weight: 4,500 kg, tire size: 225/75R16, axle configuration: 4x4, wheelbase: 3,520 mm, fuel tank capacity: 90 l, color: white, gearing type: automatic, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 2, total length: 6,100 mm, total width: 2,100 mm, total height: 3,150 mm, loading space volume: 12 m³, loading space length: 3,540 mm, loading space width: 1,740 mm, loading space height: 1,900 mm, Year of construction: 2023, steering wheel position: left, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, sliding door, soot filter, traction control, trailer coupling, truck registration, CUSTOMIZE IT! Base vehicle color is pure white. NEW VEHICLE, first registration 01/05/2026! DOWNGRADED to 3,500 kg gross vehicle weight possible. *WARRANTY EXTENSION to 5 years from first registration optionally available! Door color is IVECO white, no accidents, door color will be adapted to customer requirements. In addition to the extensive standard equipment: SPECIAL EQUIPMENT CHASSIS Standard suspension, front axle ENGINE/TRANSMISSION/AXLES Emission standard EURO VI E Starting strategy Standard Automatic torque converter transmission HI-MATIC 8HP Heated fuel filter Data set Standard Diesel particulate filter Generator 3080 Watts (14 Volt x 220 Ampere) Comfort noise insulation Handbrake control for remote start Fuel Standard Cooler in aluminum Crankcase ventilation heated Engine speed 3500/min Without engine start-stop system Without auxiliary drive Oil pan Standard DESCRIPTION BODY/SUPERSTRUCTURE Rear doors, opening angle 260° Loading lights outside above rear doors Cargo area lights 2 x LED Sliding doors on both sides Partition, omitted SEATING Comfort seat for passenger with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung Comfort seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung ELECTRICS/LIGHTING Trailer socket 12V 13-pin Expansion module + CAN Open High beam control automatic Light and rain sensor Fog lights Preparation for telematics system (telematics box) DRIVER CABIN EXTERIOR Additional vehicle key, with remote control Rear view camera with dynamic lines Warning sounder for reversing, not switchable off DRIVER CABIN INTERIOR/AUDIO Roof storage compartment above windshield Front and head/side/window airbags for driver and passenger with seat belt pretensioners Grab handle on A-pillar Air conditioning manual Steering column adjustable in height and inclination Without rear wall insulation Radio HI-Connect with Bluetooth hands-free system and multi-function steering wheel, compatible with Apple Car Play and Android Auto Cruise control Hot water auxiliary heater Central storage compartment with USB charging port CHASSIS Trailer coupling ball head Differential lock on drive axle(s), switchable Fuel tank 90l integrated Without spare wheel Without spare wheel storage ENGINE/TRANSMISSION/AXLES Exhaust pipe on the left side Eco-Smart function, omitted Rear axle ratio i = 4.444 Homologation incomplete for a complete vehicle (individual inspection required) Air conditioning compressor 170ccm Run-Lock function ADDITIONAL EQUIPMENT ENGINE/TRANSMISSION/AXLES Protection for oil pan COLOR Pure white IC 082 RAL 9010 CONVERSIONS AND MODIFICATIONS ALL-WHEEL DRIVE CONVERSION AX TS DESCRIPTION TS 4x4 DAILY AX 35C-50C All-Road TS 4x4 DAILY AX Additional price HI-MATIC TS 4x4 DAILY AX OFF-ROAD Single base with single tires TS 4x4 DAILY OFF-ROAD Tires TS 4x4 DAILY OFF-ROAD Package Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale excepted! Gbjdpfx Aoztuw Iehtor Pictures may contain optional equipment at extra cost! Delivery date by arrangement! Inspection only by appointment! Address is only office address, not vehicle location!