Used Punch-Shear Machines Mubea Kblh1000 for sale (66,856)

Condition: used, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized rear stop up to 1000 mm with fine adjustment via handwheel Crown angle adjustment knife sharpened Iodpfx Aeqmvlrsnmsba operation manual Weight: approx. 1400 kg

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Ibedot Exprjpfx Anmea Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm throat: 1000 mm operating pressure: pneum. min/max 6/8 bar operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device Ibsdpfx Ansu Icxdsmea The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel - workpiece counter - manual- and automatic operation possible - emergency stop On sale as is. i.D. *

Condition: used, Technical details: dimension machine xH: 1,8 x 1,1 x 1,0 m Ijdpfjxu Dx Dsx Anmjba

Condition: good (used), Year of construction: 1985, FOR SALE: Automatic Stamping and Bending Machine BIHLER RM-30 High-performance equipment for the automatic production of complex metal parts from wire or strip material. Identification and Brand Brand: BIHLER (Otto Bihler Maschinenfabrik, Germany). Model: RM-30. Year of manufacture: 1985. Machine number: 23589. Technical Specifications (Model RM-30) Maximum strip width: 32 mm. Maximum wire diameter: 3 mm (mild steel). Feed length (standard): Up to 120 mm. Nominal press force: 70 kN (7 tons). Production speed: Adjustable, up to 350 parts/minute (depending on complexity). Number of slides: Up to 5 standard bending units. Equipment and Configuration Control system: Separate control panel with user interface. Kinematics: Radial cam drive for maximum precision and repeatability. Press unit: Integrated for cutting, punching, or marking operations prior to bending. Safety: Machine equipped with protective guards and emergency stop. Iodpfx Aey Shgpenmjba Advantages Versatility: Enables the production of highly complex parts in a single cycle. Bihler reliability: Renowned worldwide for robust construction and long-lasting mechanical components. Precision: Ideal for the electronics, automotive, and connector industries.

Condition: new, Year of construction: 2024, TP Turret Punch Presses With the Durma TP series of punch presses, you can achieve top quality with a precise and fast turret, improved hydraulics, and 3 automatic indexing stations. Featuring a movable table, partial unloading container, automatic clamps, CAD/CAM software, and a control unit, Durma turret punch presses are easy to operate. Automation systems that increase both work safety and productivity also enhance user safety while reducing downtime. Punching force: 30 tons Working area: 3,000+R x 1,500 mm X-axis travel: 3,000+R mm (adjustable) Y-axis travel: 1,500 mm Y-axis speed: 60 m/min X-axis speed: 70 m/min Combined X+Y speed: 92 m/min Max. stroke rate (in 1 mm increments, 1 mm sheet thickness): 1,100 strokes/min Max. stroke rate (in 25 mm increments, 1 mm sheet thickness): 325 strokes/min Ibsdsg Admfjpfx Anmsa Max. marking speed: 1,200 strokes/min Main cylinder stroke: 40 mm Max. punching stroke: 25 mm Max. cutting capacity with fixed tool station (steel): 6 mm Max. cutting capacity with fixed tool station (NiRo): 3 mm Max. cutting capacity with indexing station (steel): 3 mm Max. cutting capacity with indexing station (NiRo): 1.5 mm Tool changer (27 stations without tools and holders): 11 x A-station fixed: 0.8-12.7 mm 11 x B-station fixed: 12.8 - 31.7 mm 2 x C-station fixed: 31.8 - 50.8 mm 1 x D-station fixed: 50.9 - 88.9 mm 3 x D-station indexing: 50.9 - 88.9 mm Positioning accuracy: +/- 0.1 mm Repeatability: +/- 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. sheet weight: 200 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D-station): 88.9 mm Motor power: 7.5 kW Main dimensions: Height: 2,310 mm Width without light curtains: 6,300 mm Width with light curtains: 8,300 mm Length without light curtains: 6,650 mm Length with light curtains: 7,650 mm Weight: 19,500 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Ijdpfey T N Uqsx Anmjba Maximum stroke 30 mm Weight 295 kg

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Iedpfjy T N S Aex Anmjba Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Ijdey T N Svopfx Anmeba Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Ibedpfx Anoy T N Spjmea Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: excellent (used), You are bidding on: a high-quality plate shear and bending brake from a very good and well-known manufacturer – Schechtl. Features of the machine: Plate shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m (blade in top condition, see photos; original lettering still present, which may fade after frequent cutting) Back gauge Light bar with LED for cut line illumination Adjustable front support Bending brake KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot pedal Optional: back gauge or beading tool Isdpfx Aney T H Nxsmjba Attachment rail Round dies and other dies According to §25a UStG The machines are in good used condition and are ready for immediate use; they come from a private collection. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various dies, back gauges – everything related to sheet metal and steel processing, including bending brakes, plate shears, drilling machines, slitting and profiling machines, accessories (beading equipment, round dies for gutter production, back stops, etc.), and other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice according to §25a UStG, which includes the value-added tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and recommended after scheduling an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Bending brake KS 260504 & HT 260505

Condition: excellent (used), Year of construction: 1976, Iberica LM55 Ibedpfsyzgr Njx Anmea year 1976 format 100×70 B1

Condition: good (used), Manufacturer: LVD STRIPPIT Type: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Under power inspection possible Large package tooling WILSON Auto indexing rotation tools included Laser safety guids included Specifications Metric US standard Table load 150 Working area X axis 2500 mm Working area Y axis 1250 mm Working area X axis with takeover 5000 mm Punching force Ibedpov Ic Tqofx Anmsa 20 T Max. sheet thickness 6 mm Turret positions 30 Auto index. positions 4 Positioning speed X and Y axis 4500 mm/min. Turret change speed 900 rpm Dimensions (estimate) Length 6400 mm Width 5600 mm Height 2445 mm Weight 16500 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: used, Oscillating shear, panel shear KÖLLSCHEN Type BSK 2000/2 Serial No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand extension 90 mm Working height 920 mm Mains connection 380 volts, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet metal holder Isdpfx Aeifu Anenmoba - Manual back gauge 500 mm - Gauge adjustment via 2 handwheels, at the rear on the back gauge guide with measuring scale - Front side gauge, left, 720 mm - Electric foot switch - Manual central lubrication - Control cabinet on the machine - Machine stands on 4 oscillating elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm Weight 2300 kg In good condition

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram Ibedpfei Db Ibjx Anmoa - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch Isdpjrzfh Hsfx Anmsba - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: good (used), You are bidding here on a branded guillotine shear and folding bench from a very reputable and well-known manufacturer – Schechtl. Device specifications: Guillotine Shear HT 200 - Capacity: 1.25mm steel, aluminum, etc. and more - Cutting length: just over 2m - Depth stop - Front support, extendable Folding Bench - KS model – Capacity: 1mm steel, aluminum and more (up to 1.5mm) - Bending length: just over 2m - Foot-operated closer - Optional depth stop or beading attachment - Round rollers and additional guide rails included - Sale according to §25a UStG Optionally, I offer the possibility to purchase a segment bending bench from the top manufacturer Cidan – likely the market leader. Cidan Machinery also includes Thalmann (top manufacturer of long folding machines) and Forstner (leading slitting line manufacturer). This is the heavy-duty version – 1m / 2mm steel - Aluminum and more significantly higher capacity - Triple-segmented - Angle display - Foot-operated closer - Storage box Note: The segment bending bench can be purchased in addition to any of my machine sets, but will not be sold separately. Additional price available upon request. Ibodpfeyw Si Eex Anmoa The machines are in good and clean condition and ready for immediate use. They come from private ownership. Important: Optionally, you can find and purchase many machines and accessories for sheet metal and steel processing – such as folding benches, guillotine shears, drill presses, roll bending machines, slitting and profiling machines, accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from leading top manufacturers in our shop. If you have any questions, I am always available to help. You will receive an invoice according to §25a UStG. The invoiced amount includes VAT (differential taxation applies). Free loading available – weight approx. 750 kg and 650 kg. Inspection and testing by appointment via phone is possible and encouraged. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should occur within 10 days after the auction ends. Location: 97249 Eisingen, approximately 3 minutes from motorway A3 and A81. Item number: Folding Bench KS and HT

Condition: good (used), functionality: fully functional, Year of construction: 2013, AVAILABLE FROM October 2026 Punching force: 220 kN Laser power in watts: 4000 Travel range - x: 2500 mm Travel range - y: 1250 mm Cutting capacity in structural steel: 8 mm Cutting capacity in stainless steel: 8 mm Cutting capacity in aluminum: 6 mm Workpiece weight: 280 kg Machine weight approx.: 24,000 kg Dimensions: 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Traveling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws Ibsdsy Tm Dpopfx Anmja - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control etc.

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min Ibjdpjwirkgefx Anmea 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Year of construction: 1997, Bobst SPO 160S + Bobst Flexo 160 – 3-color, ref. 3006 Ibodpfx Aney U D Nxsmja The line consists of: – Bobst Easyloader – 3 x Bobst 160 flexo units with vacuum transfer – sheet transfer system – Bobst SPO 160S – delivery stacker Maximum sheet size – 1600x1100mm Maximum output – 5500 sheets/hour

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Ibjdpfx Anoy Udrmomea Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T If you have any further questions, please do not hesitate to ask.

Condition: used, functionality: fully functional, --Punching machine Omes CH85 XS WORKING IN GOOD CONDITION. YEAR 1995. DIMENSIONS: 190X80X185 cm (h), 2100 KG Ibedjwn Hygjpfx Anmja --Punching machine Omes CH70 WORKING IN GOOD CONDITION. DIMENSIONS: 170X80X190 cm (h), 1700 KG

Condition: used, functionality: fully functional, PUNCHING MACHINE FICEP 604 N -Machine dimensions mm approx. 150x65X220 (H) cm, Weight kg 1500 -Power supply voltage 380 V 50 H -Motor power kW 7.5 -Punching force ton 60 -Max. hole of 32 mm executable on a thickness of mm 16 -Max. diameter with large hole equipment (optional) mm 100 Ibjdpfx Aewn Hytonmoa -Working height mm 950 -Punch stroke mm From 0 to 40

Condition: used, functionality: fully functional, ---IMS PHY 1100 PUNCHING MACHINE, YEAR 2008, MAX PUNCHING 32X26 mm. Overall dimensions 185X75X210(h) cm, Machine weight 1800 kg ---IMS HY 45 VS PUNCHING MACHINE YEAR 2005 Hydraulic single punch Power 45 ton 5 work stations (slotting, angular cutting, bar cutting, shearing) Punching diameter 32 mm X 12 mm Slotting 50X40 x 6 mm 90 degree angular cutting 80 mm X 80 mm X 8 mm Plates 300 mm X11 mm Swan neck 170 mm Controlled or free descent Self-moving extractor Adjustment of punch upper dead point Check squares Motor power 4 kW Overall dimensions 100X60X180(h) cm, Machine weight 500 kg Ibodpswn Hu Refx Anmea

Condition: used, functionality: fully functional, PUNCHING MACHINE CORI C30/76P RM2 POS, YEAR 1195, POWER: 30 TON, RECESS: 760 mm. DIMENSIONS: 278X178X193(h) cm. WEIGHT: 4400 KG Ibjdewn Hv Ispfx Anmea