Used Riedex Dm 160 P for sale (46,549)

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Centre distance: 650 mm Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Nlodpoyciw Aofx Akysa Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm Nedpfxelp U Hge Akysla ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Condition: new, machine/vehicle number: ede0610378cbe39cc4883251d, empty load weight: 24,000 kg, maximum load weight: 7,550 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction 1st pair of wheel recesses after steel platform recessed in the tramline area, inclined towards the entrance, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. Nljdpfx Aoi Ri Ryokysa If machines are to be driven where the overall height is to be checked, we request a technical data sheet for the machine types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer). Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 110 3 pairs of lashing points, 10 tons each, integrated in the floor at the front Incl. 6 pairs of lashing mushrooms at the top and sides, each 10 tons, embedded in the outer frame 1 x to neck area remaining distributed in between Distance not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Twin steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, incl. Afterwards with 70 mm softwood floor, steel/checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Low loading area incl. rear slope 8 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. cannot be achieved. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany Incl. with

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Nedpfxjx R Avvs Akysla Pin speed (frame side) : 16 500 rpm Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley  

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-40-160-PPV-A -Piston: Ø 40 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Dimensions: 325/55/H55 mm -Weight: 1.5 kg Nodpfxed S A U So Akyjla

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNG-32-160-PPV-A -Stroke: 160 mm -Piston: Ø 63 mm -Piston rod: Ø 12 mm -Max. pressure: 12 bar -Quantity: 3 pieces available -Price: per piece Njdpfsw Up Ixjx Akyela -Dimensions: 308/50/H50 mm -Weight: 1.0 kg/piece

Condition: good (used), three-phase motor, electric motor Nlsdpfsv Ul Dfex Akysa -Manufacturer: VEM, electric motor type KPER 160 M4 -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP54 -Design: B5 -Dimensions: 525/260/H320 mm -Weight: 87 kg.

Condition: good (used), Variator pulley, Vario adjustment pulley, Vario belt pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Lenze, Vario belt pulley with compression spring -Type: Simplabelt 11.213.016 -Outer pulley diameter: 160 mm Nsdpfxowz U Uls Akyjla -Diameter of the inner socket: 18 mm -Dimensions: Ø160 x 110 mm -Weight: 3.4 kg

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor Nsdpfx Akexl Rz Tsyela -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder tray sealing machine Inauen VC999/ TS 1200 N -Type: 121AA20160ZP -Stroke: 160mm Nlsdpfx Aksm Hd Rzeyea -Piston: Ø 120 mm -Piston rod: Ø 32 mm / M27 x 2 -Dimensions: 445/135/H135 mm -Weight: 9.6kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-160-PPVA-N3 -Stroke travel: 160 mm Nlodpexwkr Nefx Akyea -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available Price: per piece -Dimensions: 520/95/H170 mm -Weight: 5.2 kg

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 5 grooves type SPA 160x5 2517 -V-belt width: 13 mm -Receptacle: Ø55 x 45 mm taper clamping bushing 2517 (can be changed) Nledpopid D Sjfx Akysa -Dimension: Ø165 x 80 mm -Weight: 6.3kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DSW-32-160 PPV -Stroke: 160 mm Nsdpfed Subxex Akyola -Max. Pressure: 10 bar -Price: per piece -Number: 5 pieces -Dimensions: Ø 38 x 325 mm -Weight: 0.65 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-63-160-PPV-A -Piston: Ø 63 mm -Stroke: 160 mm Njdped S Dabofx Akyola -Max. Pressure: 12 bar -Dimensions: 470/75/H110 mm -Weight: 3.6 kg

Condition: new, - Capacity 160 tons - Cylinder stroke 400 mm - Working width 1100 mm - Cylinder is movable Njdeg Sr Rpspfx Akyela - Electric or manual operation - Pressure gauge - Emergency stop - 400V

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, Great XL 75 machine in excellent condition and equipment Lacquer tower (chamber blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts, and circumferential, lateral, and diagonal register with Job Memory Card and touch screen Alcolor Vario film dampening units with recirculation and cooling CombiStar ink unit temperature control (water-cooled) Autoplate XL fully automatic simultaneous plate changing system (plate change in 1 minute for 5 plates!!) Preset automatic format adjustment automatic ink roller cleaning device Nledex S Npfspfx Akysa automatic blanket and impression cylinder cleaning device Grafix powder sprayer IR dryer DryStar 2000 Extended high pile delivery Standard accessories

Condition: good (used), Year of construction: 2009, Manufacturer: BT Tip: SPE 160 L Load capacity: 1600 kg Fork length: 1600 mm Year of manufacture: 2009 Nledolz Nyqjpfx Akysa Without charger Battery must be replaced/repaired!!!

Condition: used, Winter service attachment for Piaggio / Pfau: - Pfau LBS 160 snow plow Nedpjuyhifjfx Akysla - Mounting bracket with electro-hydraulics, lifting cylinder and lighting - WITHOUT lower link / swivel cylinder Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, Technical details: weight of the machine approx.: 8kg kg dimensions L x W x H: Ø 160mmx 85 mm m Nledpfx Asu N Dw Dskyja Origin Germany Weight 10kg Ø 160mm x 90mm magnetic core 3 pieces, W: 20mm; distance: 36mm *

Condition: used, Year of construction: 1997, Technical details: pressure: 160 t distance between columns: 1000 mm stroke: 250 mm dayligth: 600 mm distance table/ram: 600 mm table height over floor: 550 mm table surface area: 810 x 860 mm clamping surface ram: T x B: 720 x 580 mit T-Nuten mm Njdpfx Aou Nfmmjkyola total power requirement: 15 kW weight of the machine ca.: ca. 16,0 t The machine isn't installed yet. The pictures are from the origin location of the former owner. further details: - sideway passage W: 520 x H: 620mm - passage front side W:660mm x H: 600mm equipment: - walkable platform arround the machine= height over floor approx. 2400mm, platform approx. 2700 x 2600 x 1050mm - hydraulic pack - oil cooler i.D. *

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. Nlodpfxou N Dfhs Akyja *

Condition: used, Technical details: diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m Nlsdpfx Asu Nurfekyoa draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch *

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm Nlodpju N A U Iofx Akyja daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Technical details: pressure: 160 t throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 passage opening in table: 400x350 mm clamping surface ram: 630x850 mm Nljdpeu Nfhqsfx Akysa clamping plate: 760x1010x92 mm total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m - via two hand control - copy of documents digital available Machine can be demonstrated under power. *

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Njdpjb A Imfjfx Akyela -Stroke travel: 160 mm -Piston diameter: mm -Piston rod: 16 mm (connection M 12 x1.5 thread) -Total length: 320 mm -Total length extended: 480 mm -Air inlet and outlet: adjustable -Quantity: 15 pieces available Price: per piece