Used Schuler Hydrap Drawing Press - Hydraulic Press for sale (27,956)

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press Lrjdpfx Agsyzd I Usrjt -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: used, Year of construction: 1981, USED ALUMINIUM PROFILE PRODUCTION LINE GENERAL INFORMATION Equipment: Aluminium Extrusion Press Manufacturer: Youngstown (USA) Press Capacity: 1,650 Metric Tons Press Type: Horizontal Hydraulic, Direct Extrusion Year: Unknown (1980s) Refurbished: 1999 Condition: Under Power Availability: Immediate 1. INDUCTION HEATING SYSTEM - Make: Local - Control: PLC (LS Master-K80) - Built in: 1999 - Rated Power: 200 kW - Loader included 2. EXTRUSION PRESS - Rated Extrusion Force: 1,650 Tons - Main Ram Stroke: 1,200 mm - Maximum Extrusion Speed: 15 mm/sec - Maximum Extrusion Pressure: 20–25 MPa Control System - PLC System: LS XGK - HMI: Touch Screen Operator Panel - Control Modes: Manual / Semi-Automatic / Automatic - Process Control: Extrusion Pressure & Speed Control Hydraulic System - Main Working Pressure: 20–25 MPa - Main Motor Power: 2 × 132 kW - Hydraulic Pumps: 2 × Kawasaki LZ-500-110R1 (600 L/min) - Oil Tank Capacity: 8,000 Liters - Oil Cooling Pump: 120 L/min Billet & Container - Container Cylinder: Ø203.2 mm Lredpozy H Rmefx Agrst - Container Heating: Induction - Billet Diameter: 150 mm - Billet Length: 550 mm Die & Tooling - Maximum Die Diameter: 230 mm - Die Change System: Manual - Die Heater 3. RUN-OUT TABLE - Length: 40 m - Cooling: Water / Air - Profile Support Rollers 4. PULLER - Speed synchronized with extrusion - Hydraulic gripping system 5. SHEAR - Cylinder: Ø155 mm - Stroke: 571.5 mm 6. COOLING BED - Length: 40 m 7. STRETCHER - Capacity: 25 Tons - Length: 30 m 8. CUTTING SAW 9. PACKING SYSTEM - Profile Stacking - Bundle Tying FLOOR SPACE 20 × 60 m

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Lrjdpfeyxgr Rex Agret

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount Lrodpfew U U Svex Agrot - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Lrsdpfx Agozucxcerst Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] Lsdpfxsuhakuj Agrsrt - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 1315 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((length-width-height)) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Year of construction: 2006, condition: used, machine/vehicle number: 10510, Drive power: 138 kW, clamping force: 4,500 kN, machine weight: approx. 74,000 kg, max. tool weight: 7,500 kg, tool dimensions: approx. 2,150 x 1,300 mm, stroke: approx. 61 mm, SIEMENS SIMATIC C MULTI PANEL control, two-hand operation, upstream light curtain, separate RITTAL control panel system, cooling system, including accessories: 1 workbench, 1 sheet metal cabinet, contents: various hand tools. Ljdpezqzd Ajfx Agrjrt

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 16 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, clearance between the columns: 500 mm, oil tank capacity: 60 l, total length: 1,040 mm, total width: 1,030 mm, total height: 2,000 mm, 16 ton hydraulic press for sale in good condition HANS SCHOEN TES 16 two-column hydraulic press Year of manufacture: 1986 Pressing force 160 kN Lrodpfx Agezf Ilcerot motor power: 3kw 380v 50Hz two-hand operation Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm Machine dimensions: height: 200cm width: 103cm length: 104cm weight: 1000kg.

Condition: used, TECHNICAL DETAILS Lredpjuhai Rjfx Agrot - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1200 x 1200 [mm] - Machine height : 2200 [mm] - Machine weight : 550 [kg] MACHINE HOURS - Working hours : 1070 [h]

Condition: used, TECHNICAL DETAILS - Cutting strength : 1700 [daN] - Max. slide travel : 75 [mm] - Max. approach speed : 315 [mm/s] - Slide stopping time : 50 [ms] LOWER EXTRACTOR - Diameter : 16 [mm] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1300 x 1100 [mm] - Machine height : 1900 [mm] - Machine weight : 575 [kg] MACHINE HOURS - Working hours : 669 [h] Lrjdpfx Agouhai Djrjt

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Lsdpfxswcz Axo Agrsrt

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Lodpfxov Rwu Ue Agrjrt Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Lrjdpfswki Apex Agret Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm table surface area 1010 x 560 mm feed down 4,8 mm/sec feed up 7,5 mm/sec weight of the machine ca. 0,9 t dimensions 1320 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Cylinders can be moved sideways. Safety valve at cylinder end position. Ljdpfevu E Uwjx Agrort CE marked

Condition: excellent (used), Year of construction: 1990, input voltage: 200 V, type of input current: three-phase, pressing force: 5 t, stroke length: 150 mm, reverse speed: 360 mm/s, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, working height: 385 mm, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Lsdpfx Agjwin Emerort Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, pressure 30 t stroke 150 mm table surface area 185 mm Breite column travel between the guideways 530 mm Lrsdpfx Agexabg Noret weight of the machine ca. 162 kg dimensions of the machine ca. 800 x 700 x 1805 mm

Condition: excellent (used), Year of construction: 2004, specification 150 TONS X 4000 4 AXIS CNC HYDRAULIC DOWN STROKING PRESS BRAKE COMPLETE WITH FULL LENGTH TOP AND BOTTOM TOOLING INCLUDING A BOTTOM MULTI VEE BLOCK description TYPE HYDRAULIC DOWNSTROKING BENDING LENGTH 4000 BENDING PRESSURE 150 TONS CONTROL CYBELEC DNC 60 NO OF AXIS 4 AXIS CONFIGURATION X1 Y1 R MAX SPEED 80mm/SEC Lodpfx Agsh N Dqrorsrt STROKE 180 mm GUARDS MACHINE MOUNTED ELECTRONIC GUARDS SIDE AND REAR INTERLOCKED FENCING WEIGHT 11200 KG SERIAL NO. 6150/11324 MOTOR SIZE 7.5 KW YEAR OF MAUFACTURER 2004

Condition: new, Year of construction: 2026, CORMAK V3000 Hydraulic Gluing Press The CORMAK V3000 is an industrial hydraulic gluing press designed for bonding solid wood components, furniture panels, worktops, and laminated boards. Built around a heavy-duty steel frame and equipped with four hydraulic clamping units providing a combined pressing force of 10 tonnes, the machine ensures consistent production results and high-quality bonded joints. Lsdpfx Agswcy T Aorort Key Features 4 × 2,500 kg clamping force – evenly distributed pressure ensures strong and durable bonding across the entire workpiece surface. Heavy-duty steel frame – high structural rigidity provides excellent stability and resistance to deformation, even during prolonged operation. Adjustable clamping units – quick and easy positioning allows the press to accommodate a wide range of workpiece sizes. Pressure locking system – maintains constant clamping pressure without the need for continuous adjustments. Spring-assisted side guide for hydraulic cylinders – ensures smooth piston movement and precise operation of the clamping units. Heavy-duty locking nuts – securely hold the selected settings, improving safety when working under high clamping forces. Construction and Technology The V3000 is manufactured from high-grade structural steel, offering excellent resistance to deformation and long-term mechanical fatigue. Each of the four hydraulic clamping units is mounted within a rigid guide system, ensuring accurate distribution of clamping pressure in both the horizontal and vertical directions. The simple adjustment mechanism allows the operator to position the clamping units with a minimum spacing of 240 mm, making the press suitable for both short and irregularly shaped workpieces. The large working capacity accommodates panels up to 1,550 mm in height and 3,000 mm in width. Precision and Performance The CORMAK V3000 provides a uniform distribution of clamping pressure, eliminating gaps and ensuring consistently strong adhesive joints. Stable clamping settings and an integrated pressure locking system improve process repeatability, making the machine particularly suitable for high-volume production. The press is ideal for bonding solid timber, laminated panels, and frame components. Its intuitive operation requires minimal setup, allowing operators to focus on production quality and efficiency. Applications The CORMAK V3000 is ideal for: Manufacturing laminated furniture components and cabinet fronts Producing worktops, edge-glued panels, and laminated timber panels Woodworking shops and industrial facilities processing glued timber Manufacturing stairs, doors, windows, and structural timber frames Standard Equipment Four hydraulic clamping units Heavy-duty steel frame with a 3,000 mm working length Individual pressure locking mechanism for each clamping unit Spring-assisted side guides for the hydraulic cylinders Optional Equipment Additional hydraulic clamping units Quick-connect hydraulic coupling system for an external hydraulic pump Height-adjustable support stands Technical Specifications Specification Value Overall Height 2040 mm Overall Width 3000 mm Maximum Clamping Height 1550 mm Minimum Distance Between Clamping Units 240 mm Distance from Mounting Hole to Clamping Unit 50 mm Clamping Force 4 × 2,500 kg Total Weight 260 kg

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm Lredpfxjw Smuke Agrjt throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Lrsdpfx Ajtiwgiegrot Separate control cabinet Ritta Side passages Ground level installation

Condition: used, 60 to stroke 400 mm dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec feed down 9,4 mm/sec total power requirement 4 kW weight of the machine ca. 700 kg Lrodpfjyv Nm Ssx Agrjt Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark

Condition: used, Year of construction: 2019, pressing force: 250 t, pressure:250 t passage width:2500 mm stroke:500 mm total power requirement:60 kW weight of the machine ca.:39 t dimensions:2720 x 3750 x 4350 mm return capacity:25 t max. working heidht:800 mm Table dimensions:3090 x 1500 mm :3090 x 1500 mm table height over floor:1000 mm pre-running speed:400 mm/sec pressure speed:bei 125 t, 50 mm/sec Lrjdpfjd Nq Idox Agrjt Return Speed:400 mm/sec speed rapid traverse:400 mm/sec :1500 l Oil cooling (electric):3 kW (max) Vibration damper plates:je 450x450x85 mm pressure:250 t bei 220 bar t/bar pump capacity:176 Lt./min :46er / 10 my Hydraulics from Bosch Rexroth or other German manufacturers :Parker, Hydac :inklusive Light Barriers from Schmersal/Pilz:Pilz Monitor:Omron 12 Zoll

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio Lredpfx Astrpiijgrjt - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 BENDING PRESSURE 80 TONS BENDING LENGTH 2500 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 Ljdpfxowybcyj Agrjrt AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW Lrsdpfx Agszkl Hujret weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools