Used Scm Nova Fs410 for sale (921)

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale Ljdpfx Aezx U Nujgrjrt worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm Lrjdpfx Aorx S Ipsgrst MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Lredpfx Agsttakhjret Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Lsdox Twdyspfx Agrert

Condition: excellent (used), Year of construction: 2019, Holzkraft Panel Saw Si 400 es Lrsdpfeyyax Hsx Agrot Year of manufacture: 2019 Table dimensions: 940 x 560 mm Table height: 900 mm Cutting length: 3200 mm Sliding table dimensions: 360 x 142 x 2600 mm Max. cutting height 90°/45° with scoring unit: 138 / 98 mm Max. cross-cut width to the left of saw blade: 3260 mm Cutting width with rip fence: 1270 mm Saw blade tilting range: 90° - 45° Max. saw blade diameter: Ø 400 mm Scoring blade diameter: Ø 120 mm Main saw blade speed: 3500/5000 rpm Scoring unit speed: 9200 rpm Motor power: 400 V / 50 Hz / S6 - 40% 7 kW (9.5 HP) Scoring unit motor power: 0.55 kW (0.75 HP) Extraction port diameter: 120 mm Blade guard extraction port Ø: 80 mm Weight approx. 680 kg

Condition: excellent (used), SCM Casadei C 41 C Universal Combined Woodworking Machine with FT 200 Dust Extractor For sale is an SCM Casadei C 41 C universal combined woodworking machine, manufactured in 2016. The machine was purchased new from Hudek Zagreb d.o.o. and has been used in production. It is fully operational and can be inspected and tested by prior arrangement at its current location in Antunovac, Croatia. Lrsdpfx Ageznbyxorst The machine combines several woodworking operations in a single compact unit: Surface planing Thickness planing Sawing Spindle moulding Drilling and mortising Scoring Sliding-table operation Machine identification: Manufacturer: SCM Industria S.p.A. Make: SCM Casadei Model: C 41 C Type: C 41 Designation: Universal combined woodworking machine Year of manufacture: 2016 CE-certified version Country of manufacture: San Marino Machine weight: 628 kg Planer and thicknesser: Working width: 410 mm Surface planer table length: 1,800 mm Thicknessing capacity: 3.5–230 mm Thicknesser feed speed: 7 m/min Circular saw: Tilting saw unit: 90–45° Maximum saw-blade diameter: 315 mm Maximum cutting height: 100 mm Maximum rip-cut width on the right: 900 mm Scoring unit Sliding table Sliding table: Sliding-table length: 2,310 mm Spindle moulder: Spindle speeds: 3,500 / 7,500 / 10,000 rpm Spindle diameter: 30 mm Usable spindle height: 120 mm Drilling and mortising unit: Table travel: X 160 / Y 105 / Z 115 mm Wescott drill chuck: 0–16 mm Electrical and safety equipment: Three motors: 3 × 5.0 kW Power supply: 400 V, three-phase Frequency: 50 Hz Rated current shown on the machine nameplate: 10 A Motor brakes Emergency-stop button CE version Included equipment: An FT 200 dust extractor, rated at 1.1 kW, including a flexible extraction hose, is included with the machine. Condition and availability: Condition: used and operational Previously used in production Availability: immediately Inspection and test run possible by prior arrangement Location: Antunovac, near Osijek, Croatia Price: €7,500 plus VAT The price is negotiable for a serious buyer following an inspection of the machine.

Condition: ready for operation (used), Year of construction: 1999, SCM S630 Thickness Planer Max. planing width: 630 mm, Max. planing height: 300 mm, 4 cutterblocks Ledpfx Aozlwxfegrort electric height adjustment, infinitely variable feed speed, electronic height display with digital readout 2 rubber feed rollers 5.5 kW motor with brake CE compliant Price: 5500.-

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: AA10000992, functionality: fully functional, TECHNICAL DETAILS Table length: 5,020 mm Table width: 1,380 mm Working area X-axis: 5,020 mm Working area Y-axis: 1,300 mm Working area Z-axis: 250 mm Travel range X-axis: 5,400 mm Travel range Y-axis: 1,650 mm Travel range Z-axis: 450 mm Vector speed X/Y: 35 m/min Maximum speed X-axis: 25 m/min (?) Rapid traverse speed X-axis: 90 m/min (?) Maximum speed Y-axis: 90 m/min Maximum speed Z-axis: 30 m/min Number of milling spindles: 2 pcs. Tool clamping system: HSK-F63 Milling spindle 1 Controlled axes: 3 pcs. Lsdpfszrmqksx Agrsrt Spindle speed: 6,000–18,000 rpm Main motor power: 15 kW Milling spindle 2 Controlled axes: 3 pcs. Spindle speed: 600–24,000 rpm Main motor power: 12 kW Tool changer positions: 12 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 4,500 x 3,000 mm Total weight: 7,500 kg Machine control: KVARA Operating system: Windows Embedded Standard 7, 64-bit Processor: Intel Pentium, 2.9 GHz RAM: 8 GB DDR4 Hard disk storage: 500 GB, 7,200 rpm Software: XILOG MAESTRO / SCM Maestro Vacuum pump Manufacturer: Becker Number: 1 pc. Motor power: 5.5 kW Suction capacity: 250 m³/h Maximum vacuum pressure: 0.9 bar EQUIPMENT Sliding table 2 vacuum fields 2 reference cams 8 reference noses 8 supports Becker vacuum pump Safety bumper XILOG-MAESTRO software package CE marking

Condition: good (used), Year of construction: 2008, Used SCM Record 110 NT TVN Prisma Year of manufacture: 2008 (in operation since June 2009) 5-axis CNC machine Working area: 6110 x 1250 mm F18 drilling unit Rapid 24 tool changer Laser cross positioning aid UniClamps Reinforced vacuum pump, 250 m3 Chip conveyor Ledpfxoztxzqs Agrert Machine is available immediately, disassembled and stored.

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), actuation type: electric, Thickness planer SCM, 51cm width, electric height adjustment, 4 cutterhead. Lredpfx Aozxbb Rjgrjt

Condition: like new (used), working width 630 mm stepless feed adjustment 4-knife cutterhead maximum workpiece height 240 mm Lredpfezxyu Aox Agrot electric height adjustment 7.5 kW motor star-delta start 380V power supply

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Ljdpfjy I Srzjx Agrort Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Ljdezlw Rnepfx Agrort Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Main motor power: 7kW Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Spindle rotation: left and right Manual spindle lifting Technical documentation Year of manufacture: 2019

Condition: used, Year of construction: 2003, functionality: fully functional, GABBIANI MACCHINE AXIOMA 125 - FULLY FUNCTIONAL - GA1/002132 YEAR 2003 MAX. SAW BLADE DIAMETER: 420 mm MIN. DIAMETER: 300 mm, BORE: 80 mm SPEED: 3500 SCORING BLADE DIAMETER: 200 mm Ljdpfxswzbf Ro Agrort BORE: 80 mm SPEED: 430

Condition: good (used), Year of construction: 2007, machine/vehicle number: AA1/016112, functionality: fully functional, overall weight: 3,900 kg, table length: 3,050 mm, table width: 1,240 mm, Equipment: CE marking, documentation/manual, SCM RECORD 100 AL. 4 axis • 4 controlled axis: X, Y, Z y C X: 60 m/min Y: 45 m/min Z: 30 m/min • Aluminiun working table, nesting type: X: 3.050 mm Y: 1.240 mm • 2 working areas • 6 perimetral pneumatic reference cylinders • Vacuum pump BECKER: 250 m3/hour • Telecomand • XILOG PLUS software. Allows importing DXF files • Security fences • Security carpets • CE rules • Year 2007 ROUTER UNIT 8,5 kW / 11,5 HP 0 to 24.000 rpm Automatic Tool Change System HSK F-63 12 positions rotative tool magazine MULTIDRILL UNIT 7 vertical boring heads Lredpfx Aezg H Sdegrst 1+1horizontal boring heads X 1+1horizontal boring heads Y 2.000 to 6.000 rpm SAW UNIT Cutting in X Diameter: 120 mm 3.500 to 7.500 rpm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, Used SCM Pratix S 15 Lrodpfjxl D Slex Agret - Year: 2012 - Available in January 2026 - 3 axes - Drill head - Videos available

Condition: used, Technical data: Working width: 910 mm 1 sanding unit Roller diameter: 300 mm Workpiece height: 160 mm Extraction port diameter: 160 mm Electric height adjustment Analog height indicator Main motor power: 9 kW Lodpfx Aezu An Regrjrt Voltage: 380 V Overall dimensions: Length: 1800 mm Width: 1500 mm Height: 2150 mm

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA1/017825, functionality: fully functional, travel distance X-axis: 5,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, number of slots in tool magazine: 12, TECHNICAL DETAILS Number of controlled axes, milling spindle: 5 Tool holder: HSK-F63 Type of milling table: Cross table Tool changer positions: 12 Working area, X-axis: 5,200 mm Working area, Y-axis: 1,550 mm Working area, Z-axis: 160 mm MACHINE DETAILS Lrodpfx Agozuwt Uerst System/Software: SCM Maestro Vacuum pump Manufacturer: Becker Type: VTLF 2.250/0-791 Year of manufacture: 2014 Main motor power: 5.5 kW Capacity: 244 m³/h Negative pressure: 200 mbar Overall length: 9,000 mm Overall width: 5,000 mm Overall height: 3,100 mm EQUIPMENT Vacuum pump Becker VTLF 2.250/0-791 Manual control CNC documentation on USB stick Safety light curtain Safety fence CE certificate Documentation

Condition: excellent (used), Year of construction: 2001, working width 410mm tables lenght 2630mm 4-knives shaft motor with brake Lodpfxozxyr Uj Agrert horizontal drill included drill table 250x570mm year 2001

Condition: like new (used), Year of construction: 2025, We offer this as a new SCM Morbidelli CX110 CNC Drilling, year of construction 2025, still on warranty! Only a few months in use SCM Morbidelli CX110 CNC – 2025 CNC Drilling and Routing Center for Woodworking We offer for sale a brand-new SCM Morbidelli CX110, a high-performance CNC drilling and routing center designed for precise, flexible processing of wood panels and similar materials. Ideal for industrial production with high efficiency and accuracy. Machine Description The Morbidelli CX110 is a compact yet powerful CNC machining center, combining advanced drilling and routing capabilities. With a footprint of less than 10 m², it is perfect for workshops that require high performance in a limited space. Main Features 7.5 kW electrospindle (up to 24,000 rpm) RO.AX drilling unit (13 vertical + 5 horizontal spindles) Integrated saw blade 6-position automatic tool changer High precision and rigidity Suitable for drilling, routing, and cutting Control & Software eye-M PRIME integrated PC 24” Full HD touchscreen Maestro software (Active, Lab, Connect) Remote teleservice and IoT monitoring Lrsdpfx Aey Hf H Negrst Technical Data 400V / 50Hz 31.5 kVA Max current: 46 A Commercial Details Condition: New (2025) Official price: 90,920 EUR Our price: 52,000 EUR (excl. VAT) Transport in EU: included on price Location: Kosovo Buyers are welcome to visit our factory and see the machine in operation under real production conditions. Dismantling and transport within EU countries are included in the price

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic Lodpfx Agozuzfhorert - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture - year of manufacture: 2007 - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement - drum diameter: 110 mm - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation - air blast for belts - electric height adjustment - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning - continuously variable feed speed: 4–20 m/min Lsdpfx Ajxdxfqsgrsrt - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: used, Year of construction: 2005, Working width: 180 mm Working height: 110 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power (bottom & top spindle): 7.5 kW Motor power (right & left spindle): 7.5 kW Adjustment (bottom spindle): - Adjustment (right spindle): - Adjustment (left spindle): handwheel Adjustment (top spindle): handwheel Planer heads (bottom & top): Centrolock Planer heads (left & right): Centrolock combined with profiling capability Feed speed: 2 Feed roller pressure: spring Current consumption: 32.8 A Extraction connection: Lrjdeyq R Aiopfx Agrjt Machine length: Machine width: Weight:

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, overall weight: 4,000 kg, power of feed motor: 4,000 W, We offer this very well-maintained SCM superset nt moulder and planer, year of manufacture 2022. Manufacturer: SCM Model: superset nt Lredpfxsyapi He Agret Year of manufacture: 2022 Condition: very good Category ID: 858 Type ID: 2293 Type: Moulder and Planer If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm Lrodpfx Agsx Twccjrot * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.